connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/829791/tftp-deploy-9f8jb_rk/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/829791/tftp-deploy-9f8jb_rk/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/829791/tftp-deploy-9f8jb_rk/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/829791/tftp-deploy-9f8jb_rk/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/829791/tftp-deploy-9f8jb_rk/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/829791/tftp-deploy-9f8jb_rk/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address ee:e2:9f:00:4f:17 T eth0: DHCP client bound to address 10.8.254.242 Loading ARM Linux zImage '/mnt/tftp/829791/tftp-deploy-9f8jb_rk/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12a13000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/829791/tftp-deploy-9f8jb_rk/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18cb6459 Loading devicetree from '/mnt/tftp/829791/tftp-deploy-9f8jb_rk/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12a13000, initrd at 0x18000000, oftree at 0x18cb7000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.265-cip85-rt27 (KernelCI@build-j511275-arm-gcc-10-multi-v7-defconfig-preempt-rt-t7bjz) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Wed Nov 16 01:40:40 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1977920K/2097152K available (12288K kernel code, 1636K rwdata, 4692K rodata, 2048K init, 406K bss, 53696K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000021] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003052] Console: colour dummy device 80x30 [ 0.003209] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003218] pid_max: default: 32768 minimum: 301 [ 0.003384] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003403] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004206] CPU: Testing write buffer coherency: ok [ 0.004239] CPU0: Spectre v2: using BPIALL workaround [ 0.004704] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005630] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.007423] rcu: Hierarchical SRCU implementation. [ 0.011323] EFI services will not be available. [ 0.011720] smp: Bringing up secondary CPUs ... [ 0.013118] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013125] CPU1: Spectre v2: using BPIALL workaround [ 0.014648] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.014656] CPU2: Spectre v2: using BPIALL workaround [ 0.016144] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016151] CPU3: Spectre v2: using BPIALL workaround [ 0.016290] smp: Brought up 1 node, 4 CPUs [ 0.016327] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.016337] CPU: All CPU(s) started in SVC mode. [ 0.017540] devtmpfs: initialized [ 0.028129] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.028778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.028804] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.032216] pinctrl core: initialized pinctrl subsystem [ 0.034294] DMI not present or invalid. [ 0.035259] NET: Registered protocol family 16 [ 0.040629] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.043809] cpuidle: using governor menu [ 0.044027] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.055036] vdd1p1: supplied by regulator-dummy [ 0.055786] vdd3p0: supplied by regulator-dummy [ 0.056533] vdd2p5: supplied by regulator-dummy [ 0.057264] vddarm: supplied by regulator-dummy [ 0.058251] vddpu: supplied by regulator-dummy [ 0.058772] vddsoc: supplied by regulator-dummy [ 0.078227] No ATAGs? [ 0.078362] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.078381] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.082701] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.082969] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.089599] Serial: AMBA PL011 UART driver [ 0.125392] mxs-dma 110000.dma-apbh: initialized [ 0.128581] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.128599] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.128615] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.128628] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.128650] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.133288] vgaarb: loaded [ 0.134428] SCSI subsystem initialized [ 0.135057] usbcore: registered new interface driver usbfs [ 0.135135] usbcore: registered new interface driver hub [ 0.135212] usbcore: registered new device driver usb [ 0.136928] i2c i2c-0: IMX I2C adapter registered [ 0.136951] i2c i2c-0: can't use DMA, using PIO instead. [ 0.137949] i2c i2c-1: IMX I2C adapter registered [ 0.137971] i2c i2c-1: can't use DMA, using PIO instead. [ 0.138964] i2c i2c-2: IMX I2C adapter registered [ 0.138986] i2c i2c-2: can't use DMA, using PIO instead. [ 0.140870] pps_core: LinuxPPS API ver. 1 registered [ 0.140883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.140912] PTP clock support registered [ 0.141220] EDAC MC: Ver: 3.0.0 [ 0.144907] clocksource: Switched to clocksource mxc_timer1 [ 0.239919] NET: Registered protocol family 2 [ 0.240348] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.241490] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes) [ 0.241546] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.241649] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 0.241979] TCP: Hash tables configured (established 8192 bind 8192) [ 0.242219] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.242290] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.242597] NET: Registered protocol family 1 [ 0.243396] RPC: Registered named UNIX socket transport module. [ 0.243410] RPC: Registered udp transport module. [ 0.243422] RPC: Registered tcp transport module. [ 0.243434] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.244072] Trying to unpack rootfs image as initramfs... [ 1.490745] Freeing initrd memory: 13020K [ 1.491135] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.491443] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.494274] Initialise system trusted keyrings [ 1.494600] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.506042] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.507149] NFS: Registering the id_resolver key type [ 1.507201] Key type id_resolver registered [ 1.507213] Key type id_legacy registered [ 1.507275] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.509890] Key type asymmetric registered [ 1.509908] Asymmetric key parser 'x509' registered [ 1.510038] bounce: pool size: 64 pages [ 1.510090] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.510108] io scheduler noop registered [ 1.510120] io scheduler deadline registered [ 1.510498] io scheduler cfq registered (default) [ 1.510513] io scheduler mq-deadline registered [ 1.510526] io scheduler kyber registered [ 1.549940] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.549964] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.555216] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.555310] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.555385] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.555562] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.555721] PU : no governor for states [ 1.555748] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.636394] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.641170] SuperH (H)SCI(F) driver initialized [ 1.642435] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.547012] console [ttymxc0] enabled [ 2.552027] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.562307] msm_serial: driver initialized [ 2.566743] STMicroelectronics ASC driver initialized [ 2.573483] STM32 USART driver initialized [ 2.602371] brd: module loaded [ 2.618966] loop: module loaded [ 2.626349] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.634279] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.642300] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.650495] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.661037] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.668039] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.676844] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.687672] scsi host0: ahci-imx [ 2.691643] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.713579] CAN device driver interface [ 2.718916] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.726054] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.735414] pps pps0: new PPS source ptp0 [ 2.770953] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.778374] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.784216] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.790232] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.797205] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.809861] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.817332] usbcore: registered new interface driver pegasus [ 2.823059] usbcore: registered new interface driver asix [ 2.828517] usbcore: registered new interface driver ax88179_178a [ 2.834669] usbcore: registered new interface driver cdc_ether [ 2.840600] usbcore: registered new interface driver smsc75xx [ 2.846429] usbcore: registered new interface driver smsc95xx [ 2.852227] usbcore: registered new interface driver net1080 [ 2.857947] usbcore: registered new interface driver cdc_subset [ 2.863919] usbcore: registered new interface driver zaurus [ 2.869598] usbcore: registered new interface driver cdc_ncm [ 2.878812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.885352] ehci-pci: EHCI PCI platform driver [ 2.889863] ehci-platform: EHCI generic platform driver [ 2.895479] ehci-orion: EHCI orion driver [ 2.899772] SPEAr-ehci: EHCI SPEAr driver [ 2.904027] ehci-st: EHCI STMicroelectronics driver [ 2.909172] ehci-exynos: EHCI EXYNOS driver [ 2.913609] ehci-atmel: EHCI Atmel driver [ 2.917890] tegra-ehci: Tegra EHCI driver [ 2.922176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.928411] ohci-pci: OHCI PCI platform driver [ 2.932924] ohci-platform: OHCI generic platform driver [ 2.938499] SPEAr-ohci: OHCI SPEAr driver [ 2.942766] ohci-st: OHCI STMicroelectronics driver [ 2.947901] ohci-atmel: OHCI Atmel driver [ 2.953096] usbcore: registered new interface driver usb-storage [ 2.961920] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.970207] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.980406] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.985326] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.014999] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.021434] hub 1-0:1.0: USB hub found [ 3.025241] hub 1-0:1.0: 1 port detected [ 3.026523] ata1: SATA link down (SStatus 0 SControl 300) [ 3.026567] ahci-imx 2200000.sata: no device found, disabling link. [ 3.026576] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.056794] i2c /dev entries driver [ 3.078829] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.091322] sdhci: Secure Digital Host Controller Interface driver [ 3.097516] sdhci: Copyright(c) Pierre Ossman [ 3.104486] Synopsys Designware Multimedia Card Interface Driver [ 3.112885] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.119464] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.158612] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.199254] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.205027] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.205611] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.225806] mmc0: new high speed SDHC card at address 1234 [ 3.233006] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.240620] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.258547] usbcore: registered new interface driver usbhid [ 3.264175] usbhid: USB HID core driver [ 3.280181] NET: Registered protocol family 10 [ 3.286349] Segment Routing with IPv6 [ 3.290145] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.297857] NET: Registered protocol family 17 [ 3.302322] can: controller area network core (rev 20170425 abi 9) [ 3.308638] NET: Registered protocol family 29 [ 3.313145] can: raw protocol (rev 20170425) [ 3.319518] can: broadcast manager protocol (rev 20170425 t) [ 3.325207] can: netlink gateway (rev 20170425) max_hops=1 [ 3.331352] Key type dns_resolver registered [ 3.334964] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.344167] cpu cpu0: Linked as a consumer to regulator.4 [ 3.349754] cpu cpu0: Linked as a consumer to regulator.5 [ 3.355279] cpu cpu0: Linked as a consumer to regulator.6 [ 3.366345] ThumbEE CPU extension supported. [ 3.370648] Registering SWP/SWPB emulation handler [ 3.373146] mmc2: new DDR MMC card at address 0001 [ 3.374689] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.376046] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.377324] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.377580] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 3.378921] mmcblk2: p1 p2 [ 3.407467] Loading compiled-in X.509 certificates [ 3.443742] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.458324] hctosys: unable to open rtc device (rtc0) [ 3.468825] Freeing unused kernel memory: 2048K [ 3.473690] Run /init as init process Starting syslogd: [ 3.558518] hub 1-1:1.0: USB hub found OK [ 3.563676] hub 1-1:1.0: 4 ports detected Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.636486] udevd[138]: starting version 3.2.9 [ 3.642135] random: udevd: uninitialized urandom read (16 bytes read) [ 3.649000] random: udevd: uninitialized urandom read (16 bytes read) [ 3.655594] random: udevd: uninitialized urandom read (16 bytes read) [ 3.671111] udevd[138]: specified user 'tss' unknown [ 3.676219] udevd[138]: specified group 'tss' unknown [ 3.683789] udevd[139]: starting eudev-3.2.9 [ 4.550270] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 4.567608] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 4.577752] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 4.584355] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 4.593630] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 4.601634] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 4.607910] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 4.629039] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 5.167125] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 5.173796] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 5.181600] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.191318] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: [ 5.815382] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 5.939458] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-829791/environment . /lava-829791/environment / # /lava-829791/bin/lava-test-runner /lava-829791/0 /lava-829791/bin/lava-test-runner /lava-829791/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-829791/0/tests/0_dmesg + cat uuid + UUID=829791_1.5.2.3.1 [ 6.539315] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.592795] [ 6.641044] [ 6.689332] + set +x[ 6.699349] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-829791/environment / # . /lava-829791/environment/lava-829791/bin/lava-test-runner /lava-829791/1 / # /lava-829791/bin/lava-test-runner /lava-829791/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-829791/1/tests/1_bootrr + cat uuid + UUID=829791_1.5.2.3.5 + [ 7.201781] set +x + export 'PATH=/opt/bootrr/helpers:/lava-829791/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-829791/1/../bin/lava-test-case [ 8.265036] /lava-829791/1/../bin/lava-test-case [ 8.314436] /lava-829791/1/../bin/lava-test-case [ 8.344168] + set +x [ 8.366118] / #