Trying 192.168.1.205...
Connected to ts5.
Escape character is '^]'.

ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux)

 
U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200)
Trying to boot from MMC2


U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200)

CPU  : AM335X-GP rev 2.1
Model: TI AM335x BeagleBone Black
DRAM:  512 MiB
WDT:   Started with servicing (60s timeout)
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... <ethaddr> not set. Validating first E-fuse MAC
Net:   eth2: ethernet@4a100000, eth3: usb_ether
Hit any key to stop autoboot:  2   0 
=> setenv autoload no
setenv autoload no
=> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
=> setenv fdt_high 0xffffffff
setenv fdt_high 0xffffffff
=> dhcp
dhcp
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 172.16.3.208 (106 ms)
=> setenv serverip 172.16.3.3
setenv serverip 172.16.3.3
=> tftp 0x82000000 828056/tftp-deploy-n9eqsis7/kernel/zImage
tftp 0x82000000 828056/tftp-deploy-n9eqsis7/kernel/zImage
link up on port 0, speed 100, full duplex
Using ethernet@4a100000 device
TFTP from server 172.16.3.3; our IP address is 172.16.3.208
Filename '828056/tftp-deploy-n9eqsis7/kernel/zImage'.
Load address: 0x82000000
Loading: *##################################################  8.4 MiB
	 3.8 MiB/s
done
Bytes transferred = 8819200 (869200 hex)
=> tftp 0x83000000 828056/tftp-deploy-n9eqsis7/ramdisk/ramdisk.cpio.gz.uboot
tftp 0x83000000 828056/tftp-deploy-n9eqsis7/ramdisk/ramdisk.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using ethernet@4a100000 device
TFTP from server 172.16.3.3; our IP address is 172.16.3.208
Filename '828056/tftp-deploy-n9eqsis7/ramdisk/ramdisk.cpio.gz.uboot'.
Load address: 0x83000000
Loading: *#################################################  103.2 MiB
	 4.1 MiB/s
done
Bytes transferred = 108177084 (672a6bc hex)
=> setenv initrd_size ${filesize}
setenv initrd_size ${filesize}
=> tftp 0x88000000 828056/tftp-deploy-n9eqsis7/dtb/am335x-boneblack.dtb
tftp 0x88000000 828056/tftp-deploy-n9eqsis7/dtb/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using ethernet@4a100000 device
TFTP from server 172.16.3.3; our IP address is 172.16.3.208
Filename '828056/tftp-deploy-n9eqsis7/dtb/am335x-boneblack.dtb'.
Load address: 0x88000000
Loading: *##################################################  34.1 KiB
	 3.3 MiB/s
done
Bytes transferred = 34893 (884d hex)
=> setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
=> bootz 0x82000000 0x83000000 0x88000000
bootz 0x82000000 0x83000000 0x88000000
Kernel image @ 0x82000000 [ 0x000000 - 0x869200 ]
## Loading init Ramdisk from Legacy Image at 83000000 ...
   Image Name:   
   Created:      2023-01-18  21:43:03 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    108177020 Bytes = 103.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... Bad Data CRC
Ramdisk image is corrupt or invalid
=>  