connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/957023/tftp-deploy-8rjwn4mw/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/957023/tftp-deploy-8rjwn4mw/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/957023/tftp-deploy-8rjwn4mw/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/957023/tftp-deploy-8rjwn4mw/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/957023/tftp-deploy-8rjwn4mw/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/957023/tftp-deploy-8rjwn4mw/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 1a:f7:85:74:d3:1c T eth0: DHCP client bound to address 10.8.254.15 Loading ARM Linux zImage '/mnt/tftp/957023/tftp-deploy-8rjwn4mw/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12a18000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/957023/tftp-deploy-8rjwn4mw/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18cba634 Loading devicetree from '/mnt/tftp/957023/tftp-deploy-8rjwn4mw/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12a18000, initrd at 0x18000000, oftree at 0x18cbb000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.280-cip96-rt30 (KernelCI@build-j1546525-arm-gcc-10-defconfig-preempt-rt-2psp7) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Tue May 23 00:52:31 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1977904K/2097152K available (12288K kernel code, 1636K rwdata, 4692K rodata, 2048K init, 406K bss, 53712K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000022] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003012] Console: colour dummy device 80x30 [ 0.003175] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003186] pid_max: default: 32768 minimum: 301 [ 0.003347] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003366] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004173] CPU: Testing write buffer coherency: ok [ 0.004206] CPU0: Spectre v2: using BPIALL workaround [ 0.004687] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005663] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.007478] rcu: Hierarchical SRCU implementation. [ 0.011403] EFI services will not be available. [ 0.011829] smp: Bringing up secondary CPUs ... [ 0.013292] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013299] CPU1: Spectre v2: using BPIALL workaround [ 0.014899] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.014906] CPU2: Spectre v2: using BPIALL workaround [ 0.016464] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016470] CPU3: Spectre v2: using BPIALL workaround [ 0.016631] smp: Brought up 1 node, 4 CPUs [ 0.016666] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.016678] CPU: All CPU(s) started in SVC mode. [ 0.017906] devtmpfs: initialized [ 0.029036] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.029765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.029794] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.033124] pinctrl core: initialized pinctrl subsystem [ 0.035351] DMI not present or invalid. [ 0.036335] NET: Registered protocol family 16 [ 0.042191] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.045621] cpuidle: using governor menu [ 0.045848] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.057427] vdd1p1: supplied by regulator-dummy [ 0.058216] vdd3p0: supplied by regulator-dummy [ 0.058990] vdd2p5: supplied by regulator-dummy [ 0.059851] vddarm: supplied by regulator-dummy [ 0.060862] vddpu: supplied by regulator-dummy [ 0.061407] vddsoc: supplied by regulator-dummy [ 0.081649] No ATAGs? [ 0.081788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.081808] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.086247] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.086532] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.093512] Serial: AMBA PL011 UART driver [ 0.131086] mxs-dma 110000.dma-apbh: initialized [ 0.134480] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.134499] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.134517] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.134530] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.134555] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.139275] vgaarb: loaded [ 0.140551] SCSI subsystem initialized [ 0.141190] usbcore: registered new interface driver usbfs [ 0.141280] usbcore: registered new interface driver hub [ 0.141349] usbcore: registered new device driver usb [ 0.143155] i2c i2c-0: IMX I2C adapter registered [ 0.143179] i2c i2c-0: can't use DMA, using PIO instead. [ 0.144298] i2c i2c-1: IMX I2C adapter registered [ 0.144319] i2c i2c-1: can't use DMA, using PIO instead. [ 0.145357] i2c i2c-2: IMX I2C adapter registered [ 0.145378] i2c i2c-2: can't use DMA, using PIO instead. [ 0.147242] pps_core: LinuxPPS API ver. 1 registered [ 0.147255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.147287] PTP clock support registered [ 0.147608] EDAC MC: Ver: 3.0.0 [ 0.151506] clocksource: Switched to clocksource mxc_timer1 [ 0.249308] NET: Registered protocol family 2 [ 0.249745] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.250898] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes) [ 0.250956] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.251064] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 0.251396] TCP: Hash tables configured (established 8192 bind 8192) [ 0.251763] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.251833] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.252162] NET: Registered protocol family 1 [ 0.252920] RPC: Registered named UNIX socket transport module. [ 0.252936] RPC: Registered udp transport module. [ 0.252946] RPC: Registered tcp transport module. [ 0.252957] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.253608] Trying to unpack rootfs image as initramfs... [ 1.518218] Freeing initrd memory: 13036K [ 1.518575] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.518911] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.521981] Initialise system trusted keyrings [ 1.522299] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.534212] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.535401] NFS: Registering the id_resolver key type [ 1.535452] Key type id_resolver registered [ 1.535465] Key type id_legacy registered [ 1.535542] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.538238] Key type asymmetric registered [ 1.538258] Asymmetric key parser 'x509' registered [ 1.538402] bounce: pool size: 64 pages [ 1.538460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.538478] io scheduler noop registered [ 1.538490] io scheduler deadline registered [ 1.538878] io scheduler cfq registered (default) [ 1.538897] io scheduler mq-deadline registered [ 1.538911] io scheduler kyber registered [ 1.580220] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.580243] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.585842] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.585934] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.586012] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.586188] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.586356] PU : no governor for states [ 1.586384] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.673192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.678192] SuperH (H)SCI(F) driver initialized [ 1.679494] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.583398] console [ttymxc0] enabled [ 2.588448] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.598767] msm_serial: driver initialized [ 2.603219] STMicroelectronics ASC driver initialized [ 2.610540] STM32 USART driver initialized [ 2.640339] brd: module loaded [ 2.657632] loop: module loaded [ 2.665208] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.673147] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.681163] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.689354] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.699909] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.706911] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.715715] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.726636] scsi host0: ahci-imx [ 2.730606] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.753288] CAN device driver interface [ 2.758649] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.765784] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.775085] pps pps0: new PPS source ptp0 [ 2.810941] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.818394] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.824238] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.830271] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.837242] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.849980] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.857456] usbcore: registered new interface driver pegasus [ 2.863198] usbcore: registered new interface driver asix [ 2.868668] usbcore: registered new interface driver ax88179_178a [ 2.874832] usbcore: registered new interface driver cdc_ether [ 2.880750] usbcore: registered new interface driver smsc75xx [ 2.886584] usbcore: registered new interface driver smsc95xx [ 2.892398] usbcore: registered new interface driver net1080 [ 2.898114] usbcore: registered new interface driver cdc_subset [ 2.904113] usbcore: registered new interface driver zaurus [ 2.909790] usbcore: registered new interface driver cdc_ncm [ 2.919106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.925648] ehci-pci: EHCI PCI platform driver [ 2.930167] ehci-platform: EHCI generic platform driver [ 2.935784] ehci-orion: EHCI orion driver [ 2.940094] SPEAr-ehci: EHCI SPEAr driver [ 2.944384] ehci-st: EHCI STMicroelectronics driver [ 2.949514] ehci-exynos: EHCI EXYNOS driver [ 2.953984] ehci-atmel: EHCI Atmel driver [ 2.958257] tegra-ehci: Tegra EHCI driver [ 2.962577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.968813] ohci-pci: OHCI PCI platform driver [ 2.973336] ohci-platform: OHCI generic platform driver [ 2.978911] SPEAr-ohci: OHCI SPEAr driver [ 2.983202] ohci-st: OHCI STMicroelectronics driver [ 2.988349] ohci-atmel: OHCI Atmel driver [ 2.993598] usbcore: registered new interface driver usb-storage [ 3.002572] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.010851] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 3.021070] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.026013] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.061527] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.063123] ata1: SATA link down (SStatus 0 SControl 300) [ 3.063170] ahci-imx 2200000.sata: no device found, disabling link. [ 3.063179] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.086794] hub 1-0:1.0: USB hub found [ 3.090599] hub 1-0:1.0: 1 port detected [ 3.103794] i2c /dev entries driver [ 3.126498] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.139131] sdhci: Secure Digital Host Controller Interface driver [ 3.145323] sdhci: Copyright(c) Pierre Ossman [ 3.152516] Synopsys Designware Multimedia Card Interface Driver [ 3.160971] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.167556] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.205676] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.245114] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.245821] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.251933] mmc0: new high speed SDHC card at address 1234 [ 3.262823] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.274213] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.311958] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.335490] usbcore: registered new interface driver usbhid [ 3.341115] usbhid: USB HID core driver [ 3.353868] NET: Registered protocol family 10 [ 3.360051] Segment Routing with IPv6 [ 3.363825] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.370759] NET: Registered protocol family 17 [ 3.375260] can: controller area network core (rev 20170425 abi 9) [ 3.381549] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.389333] NET: Registered protocol family 29 [ 3.394931] can: raw protocol (rev 20170425) [ 3.399219] can: broadcast manager protocol (rev 20170425 t) [ 3.405839] can: netlink gateway (rev 20170425) max_hops=1 [ 3.414996] Key type dns_resolver registered [ 3.420698] mmc2: new DDR MMC card at address 0001 [ 3.422845] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.424221] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.425634] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.431623] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 3.433833] mmcblk2: p1 p2 [ 3.457361] cpu cpu0: Linked as a consumer to regulator.4 [ 3.462921] cpu cpu0: Linked as a consumer to regulator.5 [ 3.468451] cpu cpu0: Linked as a consumer to regulator.6 [ 3.475130] ThumbEE CPU extension supported. [ 3.479423] Registering SWP/SWPB emulation handler [ 3.485007] Loading compiled-in X.509 certificates [ 3.521424] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.536459] hctosys: unable to open rtc device (rtc0) [ 3.546795] Freeing unused kernel memory: 2048K [ 3.551736] Run /init as init process [ 3.594928] hub 1-1:1.0: USB hub found [ 3.599465] hub 1-1:1.0: 4 ports detected Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.719644] udevd[137]: starting version 3.2.9 [ 3.725332] random: udevd: uninitialized urandom read (16 bytes read) [ 3.732140] random: udevd: uninitialized urandom read (16 bytes read) [ 3.738721] random: udevd: uninitialized urandom read (16 bytes read) [ 3.753141] udevd[137]: specified user 'tss' unknown [ 3.758237] udevd[137]: specified group 'tss' unknown [ 3.765877] udevd[138]: starting eudev-3.2.9 [ 4.592161] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 4.613896] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 4.632895] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 4.639516] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 4.648996] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 4.658233] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 4.664405] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 4.693114] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 5.451864] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 5.460663] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 5.469585] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.482510] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: [ 5.933073] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.058203] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-957023/environment . /lava-957023/environment / # /lava-957023/bin/lava-test-runner /lava-957023/0 /lava-957023/bin/lava-test-runner /lava-957023/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-957023/0/tests/0_dmesg + cat uuid + UUID=957023_1.5.2.3.1 + [ 6.653090] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.708412] [ 6.757500] [ 6.807007] + set +x [ 6.816959] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-957023/environment / # . /lava-957023/environment/lava-957023/bin/lava-test-runner /lava-957023/1 / # /lava-957023/bin/lava-test-runner /lava-957023/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-957023/1/tests/1_bootrr + cat uuid + UUID=957023_1.5.2.3.5 [ 7.326196] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-957023/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-957023/1/../bin/lava-test-case [ 8.423417] /lava-957023/1/../bin/lava-test-case [ 8.483913] /lava-957023/1/../bin/lava-test-case [ 8.512076] + set +x[ 8.534606] / #