[Enter `^Ec?' for help] U-Boot 2021.10+dfsg-1+apertis10bv2023dev2b2 (Apr 18 2022 - 16:34:49 +0000) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPIFlash... SF: Detected gd25q16 with page size 256 Bytes, erase size 4 KiB, total 2 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: using phy at 7 FEC [PRIME], usb_ether Error: usb_ether address not set. starting USB... Bus usb@2184000: usb dr_mode not found Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.201.35 (8 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x10000000 12403081/tftp-deploy-uslf65m1/kernel/zImage tftp 0x10000000 12403081/tftp-deploy-uslf65m1/kernel/zImage Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.35 Filename '12403081/tftp-deploy-uslf65m1/kernel/zImage'. Load address: 0x10000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################# 14.3 MiB/s done Bytes transferred = 8831488 (86c200 hex) => tftp 0x14000000 12403081/tftp-deploy-uslf65m1/ramdisk/ramdisk.cpio.gz.uboot tftp 0x14000000 12403081/tftp-deploy-uslf65m1/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.35 Filename '12403081/tftp-deploy-uslf65m1/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x14000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 14.3 MiB/s done Bytes transferred = 9425562 (8fd29a hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x13f00000 12403081/tftp-deploy-uslf65m1/dtb/imx6q-sabrelite.dtb tftp 0x13f00000 12403081/tftp-deploy-uslf65m1/dtb/imx6q-sabrelite.dtb Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.35 Filename '12403081/tftp-deploy-uslf65m1/dtb/imx6q-sabrelite.dtb'. Load address: 0x13f00000 Loading: *### 10 MiB/s done Bytes transferred = 41818 (a35a hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/12403081/extract-nfsrootfs-rfbals4t,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/12403081/extract-nfsrootfs-rfbals4t,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x10000000 0x14000000 0x13f00000 bootz 0x10000000 0x14000000 0x13f00000 Kernel image @ 0x10000000 [ 0x000000 - 0x86c200 ] ## Loading init Ramdisk from Legacy Image at 14000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9425498 Bytes = 9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 13f00000 Booting using the fdt blob at 0x13f00000 Using Device Tree in place at 13f00000, end 13f0d359 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.299-cip105-rt34 (KernelCI@build-j61036-arm-gcc-10-defconfig-preempt-rt-29gm6) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Thu Dec 28 19:59:37 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') <6>[ 0.000000] bootconsole [ec_imx21] enabled <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] efi: Getting EFI parameters from FDT: <6>[ 0.000000] efi: UEFI not found. <3>[ 0.000000] OF: fdt: Reserved memory: unsupported node format, ignoring <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/12403081/extract-nfsrootfs-rfbals4t,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 942380K/1048576K available (12288K kernel code, 1636K rwdata, 4696K rodata, 2048K init, 406K bss, 40660K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. <6>[ 0.000000] No expedited grace period (rcu_normal_after_boot). <6>[ 0.000000] Tasks RCU enabled. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.003036] Console: colour dummy device 80x30 <6>[ 0.282365] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.282373] CPU: Testing write buffer coherency: ok <6>[ 0.282414] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.282419] pid_max: default: 32768 minimum: 301 <6>[ 0.282584] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.282603] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.283767] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.329118] Setting up static identity map for 0x10300000 - 0x103000a0 <6>[ 0.336828] rcu: Hierarchical SRCU implementation. <6>[ 0.343991] EFI services will not be available. <6>[ 0.346339] smp: Bringing up secondary CPUs ... <6>[ 0.352127] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.352133] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.353678] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.353685] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.355202] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.355207] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.355345] smp: Brought up 1 node, 4 CPUs <6>[ 0.390526] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.396958] CPU: All CPU(s) started in SVC mode. <6>[ 0.403048] devtmpfs: initialized <6>[ 0.418132] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.423853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.433331] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.443039] pinctrl core: initialized pinctrl subsystem <6>[ 0.447947] DMI not present or invalid. <6>[ 0.450738] NET: Registered protocol family 16 <6>[ 0.460341] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.468012] cpuidle: using governor menu <6>[ 0.469610] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.488697] vdd1p1: supplied by regulator-dummy <6>[ 0.491395] vdd3p0: supplied by regulator-dummy <6>[ 0.496182] vdd2p5: supplied by regulator-dummy <6>[ 0.500961] vddarm: supplied by regulator-dummy <6>[ 0.506006] vddpu: supplied by regulator-dummy <6>[ 0.510224] vddsoc: supplied by regulator-dummy <6>[ 0.534754] No ATAGs? <6>[ 0.534889] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.542833] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.553746] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.560707] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.574839] Serial: AMBA PL011 UART driver <6>[ 0.579549] console [pstore-1] enabled <6>[ 0.580932] pstore: Registered ramoops as persistent store backend <6>[ 0.587145] ramoops: attached 0x10000@0x30000000, ecc: 0/0 <6>[ 0.628921] mxs-dma 110000.dma-apbh: initialized <6>[ 0.641518] vgaarb: loaded <5>[ 0.642965] SCSI subsystem initialized <6>[ 0.646218] usbcore: registered new interface driver usbfs <6>[ 0.651444] usbcore: registered new interface driver hub <6>[ 0.657006] usbcore: registered new device driver usb <6>[ 0.664281] i2c i2c-0: IMX I2C adapter registered <6>[ 0.667223] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.673864] i2c i2c-1: IMX I2C adapter registered <6>[ 0.677749] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.684082] i2c i2c-2: IMX I2C adapter registered <6>[ 0.688274] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.695855] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.699054] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.708476] PTP clock support registered <6>[ 0.712972] EDAC MC: Ver: 3.0.0 <6>[ 0.719967] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.820280] NET: Registered protocol family 2 <6>[ 0.822530] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.830230] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.837066] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.844430] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) <6>[ 0.851489] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.857997] UDP hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.863976] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.870819] NET: Registered protocol family 1 <6>[ 0.875912] RPC: Registered named UNIX socket transport module. <6>[ 0.881303] RPC: Registered udp transport module. <6>[ 0.886257] RPC: Registered tcp transport module. <6>[ 0.891220] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.898565] Trying to unpack rootfs image as initramfs... <6>[ 1.704451] Freeing initrd memory: 9208K <4>[ 1.706239] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 1.713510] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 1.724457] Initialise system trusted keyrings <6>[ 1.726651] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.745025] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.749438] NFS: Registering the id_resolver key type <5>[ 1.753646] Key type id_resolver registered <5>[ 1.758017] Key type id_legacy registered <6>[ 1.762352] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.769585] Key type asymmetric registered <5>[ 1.771248] Asymmetric key parser 'x509' registered <6>[ 1.776501] bounce: pool size: 64 pages <6>[ 1.780514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 1.788124] io scheduler noop registered <6>[ 1.792301] io scheduler deadline registered <6>[ 1.797191] io scheduler cfq registered (default) <6>[ 1.801784] io scheduler mq-deadline registered <6>[ 1.806567] io scheduler kyber registered <6>[ 1.841903] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 1.846482] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 1.853639] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 1.860917] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 1.881813] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 1.888725] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <4>[ 1.895547] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 1.895632] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 1.895692] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 1.895829] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 1.895987] PU : no governor for states <6>[ 1.896006] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <6>[ 1.979253] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.987969] SuperH (H)SCI(F) driver initialized <6>[ 1.991324] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 27, base_baud = 5000000) is a IMX <6>[ 2.000125] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 74, base_baud = 5000000) is a IMX <6>[ 2.010587] console [ttymxc1] enabled <6>[ 2.010587] console [ttymxc1] enabled <6>[ 2.015621] bootconsole [ec_imx21] disabled <6>[ 2.015621] bootconsole [ec_imx21] disabled <6>[ 2.026177] msm_serial: driver initialized <6>[ 2.032013] STMicroelectronics ASC driver initialized <6>[ 2.039739] STM32 USART driver initialized <4>[ 2.057979] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.066720] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.073745] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.080538] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.089610] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.096792] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.116397] brd: module loaded <6>[ 2.131098] loop: module loaded <6>[ 2.138929] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 2.147132] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 2.155416] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 2.163873] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <6>[ 2.174708] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 2.181972] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 2.191039] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 2.202203] scsi host0: ahci-imx <6>[ 2.206513] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 77 <6>[ 2.230355] CAN device driver interface <6>[ 2.236069] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <4>[ 2.243428] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 2.252414] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.261871] pps pps0: new PPS source ptp0 <6>[ 2.287463] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.295170] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 2.301278] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.307550] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 2.314786] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.328336] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 2.336069] usbcore: registered new interface driver pegasus <6>[ 2.342073] usbcore: registered new interface driver asix <6>[ 2.347794] usbcore: registered new interface driver ax88179_178a <6>[ 2.354213] usbcore: registered new interface driver cdc_ether <6>[ 2.360394] usbcore: registered new interface driver smsc75xx <6>[ 2.366497] usbcore: registered new interface driver smsc95xx <6>[ 2.372570] usbcore: registered new interface driver net1080 <6>[ 2.378548] usbcore: registered new interface driver cdc_subset <6>[ 2.384793] usbcore: registered new interface driver zaurus <6>[ 2.390740] usbcore: registered new interface driver cdc_ncm <6>[ 2.400689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 2.407492] ehci-pci: EHCI PCI platform driver <6>[ 2.412268] ehci-platform: EHCI generic platform driver <6>[ 2.418152] ehci-orion: EHCI orion driver <6>[ 2.422745] SPEAr-ehci: EHCI SPEAr driver <6>[ 2.427295] ehci-st: EHCI STMicroelectronics driver <6>[ 2.432731] ehci-exynos: EHCI EXYNOS driver <6>[ 2.437447] ehci-atmel: EHCI Atmel driver <6>[ 2.442009] tegra-ehci: Tegra EHCI driver <6>[ 2.446592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 2.453069] ohci-pci: OHCI PCI platform driver <6>[ 2.457849] ohci-platform: OHCI generic platform driver <6>[ 2.463711] SPEAr-ohci: OHCI SPEAr driver <6>[ 2.468259] ohci-st: OHCI STMicroelectronics driver <6>[ 2.473696] ohci-atmel: OHCI Atmel driver <6>[ 2.479288] usbcore: registered new interface driver usb-storage <6>[ 2.488504] imx_usb 2184000.usb: Linked as a consumer to regulator.9 <6>[ 2.501470] imx_usb 2184200.usb: Linked as a consumer to regulator.14 <6>[ 2.511934] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 2.517113] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 2.541600] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 2.547309] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 2.550043] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 2.551060] hub 1-0:1.0: USB hub found <6>[ 2.551107] hub 1-0:1.0: 1 port detected <6>[ 2.560444] i2c /dev entries driver <6>[ 2.571479] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <6>[ 2.580591] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 2.593889] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.600346] sdhci: Copyright(c) Pierre Ossman <6>[ 2.607877] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.616820] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.623759] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO <6>[ 2.629205] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO <6>[ 2.634794] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 <6>[ 2.675071] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <6>[ 2.684179] sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO <6>[ 2.689801] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 <6>[ 2.731003] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA <6>[ 2.742698] mmc0: new high speed SDHC card at address 0001 <6>[ 2.746249] usbcore: registered new interface driver usbhid <6>[ 2.746253] usbhid: USB HID core driver <6>[ 2.754320] NET: Registered protocol family 10 <6>[ 2.755884] Segment Routing with IPv6 <6>[ 2.755982] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.756823] NET: Registered protocol family 17 <6>[ 2.756844] can: controller area network core (rev 20170425 abi 9) <6>[ 2.756962] NET: Registered protocol family 29 <6>[ 2.756974] can: raw protocol (rev 20170425) <6>[ 2.756984] can: broadcast manager protocol (rev 20170425 t) <6>[ 2.757003] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 2.757617] Key type dns_resolver registered <6>[ 2.759294] cpu cpu0: Linked as a consumer to regulator.4 <6>[ 2.759397] cpu cpu0: Linked as a consumer to regulator.5 <6>[ 2.759516] cpu cpu0: Linked as a consumer to regulator.6 <6>[ 2.760849] ThumbEE CPU extension supported. <5>[ 2.760869] Registering SWP/SWPB emulation handler <5>[ 2.762306] Loading compiled-in X.509 certificates <6>[ 2.764159] pstore: Using compression: deflate <6>[ 2.790403] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.790510] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.792408] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.792499] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.794376] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.794449] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.794553] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.796064] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.796137] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.796237] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.798601] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C <6>[ 2.799819] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.799908] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.801654] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.801740] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.803552] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.803622] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.803725] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.805224] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.805315] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.805414] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.806709] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.806792] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.808274] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.808356] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.810217] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.810288] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.810387] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.811932] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.812020] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.812119] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.815374] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 2.816429] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.816516] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.818142] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.818227] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.820128] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.820182] hctosys: unable to open rtc device (rtc0) <6>[ 2.820202] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.820299] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.822218] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.822365] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.822506] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.840023] usb 1-1: new high-speed USB device number 2 using ci_hdrc <6>[ 2.930756] Micrel KSZ9021 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 2.930926] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 3.090163] hub 1-1:1.0: USB hub found <6>[ 3.099994] hub 1-1:1.0: 3 ports detected <6>[ 3.199912] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 3.207324] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 3.211388] mmcblk0: mmc0:0001 SD 14.6 GiB <6>[ 3.222447] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 3.232059] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 3.241266] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 3.250022] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 3.257009] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 3.265236] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 3.274279] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 3.281439] panel-simple panel-lvds0: Dropping the link to regulator.0 <4>[ 3.333035] GPT:Primary header thinks Alt. header is not at the end of the disk. <4>[ 3.340733] GPT:29296874 != 30560255 <4>[ 3.344592] GPT:Alternate GPT header not at the end of the disk. <4>[ 3.350890] GPT:29296874 != 30560255 <4>[ 3.354751] GPT: Use GNU Parted to correct GPT errors. <6>[ 3.360268] mmcblk0: p1 p2 p3 <6>[ 3.366625] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 3.374040] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 3.382802] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 3.390294] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 3.399304] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 3.408001] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 3.414989] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 3.423170] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 3.432216] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 3.439371] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 6.070879] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 6.080148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.110110] Sending DHCP requests ., OK <6>[ 6.154298] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.35 <6>[ 6.162594] IP-Config: Complete: <6>[ 6.166120] device=eth0, hwaddr=00:19:b8:08:f1:09, ipaddr=192.168.201.35, mask=255.255.255.0, gw=192.168.201.1 <6>[ 6.176848] host=imx6q-sabrelite-lava-cbg-5, domain=lava-rack, nis-domain=(none) <6>[ 6.185026] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 6.185030] nameserver0=192.168.201.1 <6>[ 6.203422] Freeing unused kernel memory: 2048K <6>[ 6.208547] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u2 <6>[ 7.597886] flexcan 2090000.flexcan: Linked as a consumer to regulator.10 <6>[ 7.627870] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.635293] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 7.658060] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 7.665630] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 7.680556] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 7.690913] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 7.697999] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 7.710378] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 7.719789] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 7.726998] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 7.734526] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=35) <6>[ 7.735638] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.735728] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 7.743449] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 7.743972] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 7.744405] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) <6>[ 7.744418] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 7.773059] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 7.794715] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 7.800183] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 7.800195] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 7.815361] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <6>[ 7.832820] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 <4>[ 7.836311] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 7.836401] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 7.836523] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 7.843711] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 7.843821] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 7.843929] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 7.845988] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.846075] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 7.903461] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 7.910967] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 7.923447] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 7.935637] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 7.942660] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 7.958070] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 7.967542] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 7.974781] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 7.990382] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.997802] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 8.144209] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 8.151934] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 8.173385] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 8.186230] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 8.193324] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 8.207832] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 8.217399] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 8.224595] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 8.233235] sgtl5000 0-000a: Linked as a consumer to regulator.7 <6>[ 8.240139] sgtl5000 0-000a: Linked as a consumer to regulator.8 <6>[ 8.247931] sgtl5000 0-000a: sgtl5000 revision 0x11 <6>[ 8.254101] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 8.257973] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum <6>[ 8.269360] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 8.294315] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 8.301828] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 8.315342] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 8.324454] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 8.331502] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 8.343395] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 8.353034] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 8.360223] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 8.368705] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 8.376149] pwm-backlight backlight-lcd: Dropping the link to regulator.8 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. IP-Config: eth0 hardware address 00:19:b8:08:f1:09 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.201.1): address: 192.168.201.35 broadcast: 192.168.201.255 netmask: 255.255.255.0 gateway: 192.168.201.1 dns0 : 192.168.201.1 dns1 : 0.0.0.0 host : imx6q-sabrelite-lava-cbg-5 domain : lava-rack rootserver: 192.168.201.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 9.966753] systemd[1]: System time before build time, advancing clock. <3>[ 10.004067] cgroup: cgroup2: unknown option "memory_recursiveprot" <30>[ 10.020868] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) <30>[ 10.044954] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! <30>[ 10.082938] systemd[1]: Set hostname to . <30>[ 10.944330] systemd[1]: Queued start job for default target Graphical Interface. <5>[ 10.953683] random: systemd: uninitialized urandom read (16 bytes read) <28>[ 10.960764] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>[ 10.973485] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>[ 10.983247] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. <5>[ 11.020575] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 11.028945] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. <5>[ 11.070452] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 11.078822] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. <30>[ 11.121711] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. <30>[ 11.161396] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. <30>[ 11.201290] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. <30>[ 11.241005] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <30>[ 11.253260] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. <30>[ 11.290543] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. <30>[ 11.320728] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. <30>[ 11.360522] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. <30>[ 11.401114] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. <30>[ 11.441652] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. <30>[ 11.514174] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <30>[ 11.524424] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). <30>[ 11.561266] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. <30>[ 11.602983] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. <30>[ 11.644331] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. <30>[ 11.682158] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. <30>[ 11.721592] systemd[1]: Condition check resulted in Huge Pages File System being skipped. <30>[ 11.731000] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. <30>[ 11.744580] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... <30>[ 11.784929] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... <30>[ 11.855753] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... <30>[ 11.904998] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... <30>[ 11.944863] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... <5>[ 11.991342] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 12.003686] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... <30>[ 12.046872] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <5>[ 12.057071] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 12.067611] systemd[1]: Starting Journal Service... Starting Journal Service... <5>[ 12.105625] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 12.118003] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... <30>[ 12.154966] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... <30>[ 12.194129] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... <30>[ 12.247435] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. <30>[ 12.281378] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. <30>[ 12.333036] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. <30>[ 12.392135] systemd[1]: modprobe@configfs.service: Succeeded. <30>[ 12.400256] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. <30>[ 12.443381] systemd[1]: modprobe@drm.service: Succeeded. <30>[ 12.450659] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. <30>[ 12.501196] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... <46>[ 12.763837] systemd-journald[204]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create System Users... [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. <5>[ 13.221713] random: systemd: uninitialized urandom read (16 bytes read) Starting Create Static Device Nodes in /dev... [ OK ] Finished Flush Journal to Persistent<5>[ 13.284852] random: systemd-journal: uninitialized urandom read (16 bytes read) Storage. <5>[ 13.297077] random: systemd-journal: uninitialized urandom read (16 bytes read) [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Rule-based Manage…for Device Events and Files... <5>[ 13.760226] random: crng init done <5>[ 13.763918] random: 48 urandom warning(s) missed due to ratelimiting [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create Volatile Files and Directories. [ OK ] Started Rule-based Manager for Device Events and Files. Starting Network Service... Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Service. Starting Network Name Resolution... [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting User Login Management... [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Permit User Sessions... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Finished Permit User Sessions. [ OK ] Started User Login Management. [ OK ] Started Getty on tty1. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Found device /dev/ttymxc1. [ OK ] Started Serial Getty on ttymxc1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. Debian GNU/Linux 11 debian-bullseye-armhf ttymxc1 debian-bullseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 4.19.299-cip105-rt34 #1 SMP PREEMPT RT Thu Dec 28 19:59:37 UTC 2023 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/12403081/extract-nfsrootfs-rfbals4t' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/12403081/extract-nfsrootfs-rfbals4t' / # export NFS_SERVER_IP='192.168.201.1' export NFS_SERVER_IP='192.168.201.1' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-12403081/environment . /lava-12403081/environment / # /lava-12403081/bin/lava-test-runner /lava-12403081/0 /lava-12403081/bin/lava-test-runner /lava-12403081/0 + export TESTRUN_ID=0_dmesg + cd /lava-12403081/0/tests/0_dmesg + cat uuid + UUID=12403081_1.6.2.4.1<8>[ 27.354849] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 27.446262] <8>[ 27.518039] <8>[ 27.590566] + set<8>[ 27.600477] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-12403081/environment / # . /lava-12403081/environment/lava-12403081/bin/lava-test-runner /lava-12403081/1 / # /lava-12403081/bin/lava-test-runner /lava-12403081/1 + export TESTRUN_ID=1_bootrr + cd /lava-12403081/1/tests/1_bootrr + cat uuid + UUID=12403081_1.6.2.4.5<8>[ 28.167782] + set +x + export PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-12403081/1/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto backlight-lvds panel-lcd panel-lvds0 backlight-lcd /lava-12403081/1/../bin/lava-test-case <8>[ 29.321552] /lava-12403081/1/../bin/lava-test-case <8>[ 29.390974] /lava-12403081/1/../bin/lava-test-case <8>[ 29.429894] + set<8>[ 29.679886] +x / #