Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3003 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.3:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2022.07-rc3-dirty (May 24 2022 - 12:39:48 +0100) Trying to boot from MMC1 U-Boot 2022.07-rc3-dirty (May 24 2022 - 12:39:48 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing (60s timeout) 7[r[999;999H[6n8NAND: U-Boot SPL 2022.07-rc3-dirty (May 24 2022 - 12:39:48 +0100) Trying to boot from MMC1 U-Boot 2022.07-rc3-dirty (May 24 2022 - 12:39:48 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing (60s timeout) 7[r[999;999H[6n8NAND: U-Boot SPL 2022.07-rc3-dirty (May 24 2022 - 12:39:48 +0100) Trying to boot from MMC1 U-Boot 2022.07-rc3-dirty (May 24 2022 - 12:39:48 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing (60s timeout) 7[r[999;999H[6n8NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.139 (94 ms) => setenv serverip 192.168.56.123 setenv serverip 192.168.56.123 => tftp 0x82000000 398502/tftp-deploy-h8_sy0j7/kernel/zImage tftp 0x82000000 398502/tftp-deploy-h8_sy0j7/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.123; our IP address is 192.168.56.139 Filename '398502/tftp-deploy-h8_sy0j7/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 8.4 MiB 3.7 MiB/s done Bytes transferred = 8831488 (86c200 hex) => tftp 0x83000000 398502/tftp-deploy-h8_sy0j7/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 398502/tftp-deploy-h8_sy0j7/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.123; our IP address is 192.168.56.139 Filename '398502/tftp-deploy-h8_sy0j7/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 12.7 MiB 3.8 MiB/s done Bytes transferred = 13353441 (cbc1e1 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 398502/tftp-deploy-h8_sy0j7/dtb/am335x-boneblack.dtb tftp 0x88000000 398502/tftp-deploy-h8_sy0j7/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.123; our IP address is 192.168.56.139 Filename '398502/tftp-deploy-h8_sy0j7/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 34.1 KiB 2.6 MiB/s done Bytes transferred = 34893 (884d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x86c200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-12-28 20:27:24 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 13353377 Bytes = 12.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b84c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.299-cip105-rt34 (KernelCI@build-j61036-arm-gcc-10-defconfig-preempt-rt-29gm6) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Thu Dec 28 19:59:37 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omapserial0 at MMIO 0x44e09000 (options '') <6>[ 0.000000] bootconsole [omapserial0] enabled <6>[ 0.000000] Memory policy: Data cache writeback <6>[ 0.000000] efi: Getting EFI parameters from FDT: <6>[ 0.000000] efi: UEFI not found. <6>[ 0.000000] cma: Reserved 64 MiB at 0x9b800000 <6>[ 0.000000] CPU: All CPU(s) started in SVC mode. <6>[ 0.000000] AM335X ES2.1 (sgx neon) <6>[ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 <5>[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 417044K/522240K available (12288K kernel code, 1636K rwdata, 4696K rodata, 2048K init, 406K bss, 39660K reserved, 65536K cma-reserved, 0K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. <6>[ 0.000000] No expedited grace period (rcu_normal_after_boot). <6>[ 0.000000] Tasks RCU enabled. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz <6>[ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.000028] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.000035] OMAP clocksource: timer1 at 24000000 Hz <2>[ 0.003650] timer_probe: no matching timers found <6>[ 0.003940] Console: colour dummy device 80x30 <6>[ 0.260529] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.299201] CPU: Testing write buffer coherency: ok <6>[ 0.299276] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.299282] pid_max: default: 32768 minimum: 301 <6>[ 0.299452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.299463] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.300731] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.344067] Setting up static identity map for 0x80300000 - 0x803000a0 <6>[ 0.352588] rcu: Hierarchical SRCU implementation. <6>[ 0.361224] EFI services will not be available. <6>[ 0.366316] smp: Bringing up secondary CPUs ... <6>[ 0.371210] smp: Brought up 1 node, 1 CPU <6>[ 0.375581] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.382275] CPU: All CPU(s) started in SVC mode. <6>[ 0.388779] devtmpfs: initialized <6>[ 0.403537] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.412582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.422954] futex hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.433467] pinctrl core: initialized pinctrl subsystem <6>[ 0.441624] DMI not present or invalid. <6>[ 0.446601] NET: Registered protocol family 16 <6>[ 0.456136] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.494703] l4_wkup_cm:clk:0010:0: failed to disable <6>[ 0.555264] cpuidle: using governor menu <6>[ 0.569162] OMAP GPIO hardware version 0.1 <6>[ 0.590484] No ATAGs? <6>[ 0.590497] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.606508] Serial: AMBA PL011 UART driver <6>[ 0.638208] edma 49000000.edma: TI EDMA DMA engine driver <6>[ 0.648632] vgaarb: loaded <5>[ 0.652912] SCSI subsystem initialized <6>[ 0.657718] usbcore: registered new interface driver usbfs <6>[ 0.663766] usbcore: registered new interface driver hub <6>[ 0.669467] usbcore: registered new device driver usb <6>[ 0.676819] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.682124] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.691784] PTP clock support registered <6>[ 0.696293] EDAC MC: Ver: 3.0.0 <6>[ 0.703566] clocksource: Switched to clocksource timer1 <6>[ 0.804313] NET: Registered protocol family 2 <6>[ 0.809278] IP idents hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.817197] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.825434] TCP established hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.832932] TCP bind hash table entries: 4096 (order: 4, 114688 bytes) <6>[ 0.839987] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.846879] UDP hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.853167] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.860154] NET: Registered protocol family 1 <6>[ 0.865673] RPC: Registered named UNIX socket transport module. <6>[ 0.871943] RPC: Registered udp transport module. <6>[ 0.877170] RPC: Registered tcp transport module. <6>[ 0.882253] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.889838] Trying to unpack rootfs image as initramfs... <6>[ 1.904519] Freeing initrd memory: 13044K <6>[ 1.909534] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 1.921168] Initialise system trusted keyrings <6>[ 1.926568] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 1.944845] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.952285] NFS: Registering the id_resolver key type <5>[ 1.957866] Key type id_resolver registered <5>[ 1.962347] Key type id_legacy registered <6>[ 1.966799] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.974847] Key type asymmetric registered <5>[ 1.979251] Asymmetric key parser 'x509' registered <6>[ 1.984715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.992492] io scheduler noop registered <6>[ 1.996874] io scheduler deadline registered <6>[ 2.001908] io scheduler cfq registered (default) <6>[ 2.006971] io scheduler mq-deadline registered <6>[ 2.011884] io scheduler kyber registered <6>[ 2.024499] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 2.123184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 2.134574] SuperH (H)SCI(F) driver initialized <6>[ 2.140518] msm_serial: driver initialized <6>[ 2.145409] omap_uart 44e09000.serial: no wakeirq for uart0 <6>[ 2.151413] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a OMAP UART0 <6>[ 2.161274] console [ttyO0] enabled <6>[ 2.161274] console [ttyO0] enabled <6>[ 2.168973] bootconsole [omapserial0] disabled <6>[ 2.168973] bootconsole [omapserial0] disabled <6>[ 2.179445] STMicroelectronics ASC driver initialized <6>[ 2.186967] STM32 USART driver initialized <6>[ 2.193770] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 2.203980] random: crng init done <6>[ 2.225609] brd: module loaded <6>[ 2.238205] loop: module loaded <6>[ 2.255492] CAN device driver interface <6>[ 2.260966] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.268500] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 2.274914] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.281487] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 2.289032] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.373681] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.381953] davinci_mdio 4a101000.mdio: detected phy mask fffffffe <6>[ 2.411736] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 2.424763] cpsw 4a100000.ethernet: Detected MACID = 78:a5:04:e2:4c:3d <6>[ 2.432001] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 2.439127] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 2.447682] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 2.455958] usbcore: registered new interface driver pegasus <6>[ 2.462236] usbcore: registered new interface driver asix <6>[ 2.468301] usbcore: registered new interface driver ax88179_178a <6>[ 2.475051] usbcore: registered new interface driver cdc_ether <6>[ 2.481461] usbcore: registered new interface driver smsc75xx <6>[ 2.487851] usbcore: registered new interface driver smsc95xx <6>[ 2.494340] usbcore: registered new interface driver net1080 <6>[ 2.500554] usbcore: registered new interface driver cdc_subset <6>[ 2.507105] usbcore: registered new interface driver zaurus <6>[ 2.513266] usbcore: registered new interface driver cdc_ncm <6>[ 2.522349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 2.529562] ehci-pci: EHCI PCI platform driver <6>[ 2.534570] ehci-platform: EHCI generic platform driver <6>[ 2.540587] ehci-orion: EHCI orion driver <6>[ 2.545344] SPEAr-ehci: EHCI SPEAr driver <6>[ 2.549992] ehci-st: EHCI STMicroelectronics driver <6>[ 2.555567] ehci-exynos: EHCI EXYNOS driver <6>[ 2.560402] ehci-atmel: EHCI Atmel driver <6>[ 2.565106] tegra-ehci: Tegra EHCI driver <6>[ 2.569756] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 2.576587] ohci-pci: OHCI PCI platform driver <6>[ 2.581576] ohci-platform: OHCI generic platform driver <6>[ 2.587602] SPEAr-ohci: OHCI SPEAr driver <6>[ 2.592251] ohci-st: OHCI STMicroelectronics driver <6>[ 2.597826] ohci-atmel: OHCI Atmel driver <6>[ 2.603238] usbcore: registered new interface driver usb-storage <6>[ 2.617057] i2c /dev entries driver <6>[ 2.637740] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.644608] sdhci: Copyright(c) Pierre Ossman <6>[ 2.650994] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 2.660470] omap_hsmmc 48060000.mmc: Got CD GPIO <6>[ 2.666492] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 <6>[ 2.701275] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 <6>[ 2.736119] Synopsys Designware Multimedia Card Interface Driver <4>[ 2.737540] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.739512] mmc0: new high speed SDHC card at address 1234 <6>[ 2.744402] mmcblk0: mmc0:1234 SA32G 29.1 GiB <6>[ 2.746861] mmcblk0: p1 <6>[ 2.772872] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.787112] usbcore: registered new interface driver usbhid <6>[ 2.793205] usbhid: USB HID core driver <6>[ 2.800384] mmc1: new high speed MMC card at address 0001 <6>[ 2.808127] NET: Registered protocol family 10 <6>[ 2.818189] Segment Routing with IPv6 <6>[ 2.822402] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.824484] mmcblk1: mmc1:0001 MMC04G 3.60 GiB <6>[ 2.825118] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB <6>[ 2.825742] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB <6>[ 2.826058] mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB, chardev (235:0) <6>[ 2.862710] NET: Registered protocol family 17 <6>[ 2.867769] can: controller area network core (rev 20170425 abi 9) <6>[ 2.874637] NET: Registered protocol family 29 <6>[ 2.879547] can: raw protocol (rev 20170425) <6>[ 2.884332] can: broadcast manager protocol (rev 20170425 t) <6>[ 2.890515] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 2.897360] Key type dns_resolver registered <6>[ 2.902266] ThumbEE CPU extension supported. <5>[ 2.907146] Registering SWP/SWPB emulation handler <3>[ 2.912429] omap_voltage_late_init: Voltage driver support not added <5>[ 2.921475] Loading compiled-in X.509 certificates <6>[ 2.992223] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 2.999169] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 3.007122] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.135520] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 3.142785] hctosys: unable to open rtc device (rtc0) <6>[ 3.162961] net eth0: initializing cpsw version 1.12 (0) <6>[ 3.264699] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 3.284173] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 5.364523] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.383634] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.413616] Sending DHCP requests ..., OK <6>[ 12.598231] IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.139 <6>[ 12.606999] IP-Config: Complete: <6>[ 12.610639] device=eth0, hwaddr=78:a5:04:e2:4c:3d, ipaddr=192.168.56.139, mask=255.255.255.0, gw=192.168.56.254 <6>[ 12.621942] host=192.168.56.139, domain=mayfield.sirena.org.uk, nis-domain=(none) <6>[ 12.630468] bootserver=192.168.56.254, rootserver=192.168.56.254, rootpath= <6>[ 12.630473] nameserver0=192.168.56.254 <6>[ 12.643088] ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <6>[ 12.656178] Freeing unused kernel memory: 2048K <6>[ 12.661827] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 12.896251] udevd[101]: starting version 3.2.9 <27>[ 12.913515] udevd[101]: specified user 'tss' unknown <27>[ 12.919820] udevd[101]: specified group 'tss' unknown <30>[ 12.935912] udevd[102]: starting eudev-3.2.9 <4>[ 16.045036] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator <6>[ 16.114758] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 <4>[ 16.154726] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator <6>[ 16.175766] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 <6>[ 16.259944] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 16.283952] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 16.331676] hub 1-0:1.0: USB hub found <6>[ 16.346486] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-398502/environment . /lava-398502/environment / # /lava-398502/bin/lava-test-runner /lava-398502/0 /lava-398502/bin/lava-test-runner /lava-398502/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-398502/0/tests/0_dmesg + cat uuid + UUID=398502_1.5.2.4.1 + set +x <8>[ 17.190099] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : timer_probe: no matching timers found <8>[ 17.255954] <8>[ 17.314890] <8>[ 17.373486] + set +x <8>[ 17.386206] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-398502/environment / # . /lava-398502/environment/lava-398502/bin/lava-test-runner /lava-398502/1 / # /lava-398502/bin/lava-test-runner /lava-398502/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-398502/1/tests/1_bootrr + cat uuid + UUID=398502_1.5.2.4.5 + set +x <8>[ 17.909680] + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-398502/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-398502/1/../bin/lava-test-case <8>[ 18.996835] /lava-398502/1/../bin/lava-test-case <8>[ 19.053149] /lava-398502/1/../bin/lava-test-case <8>[ 19.087244] /lava-398502/1/../bin/lava-test-case <8>[ 20.157727] /lava-398502/1/../bin/lava-test-case <8>[ 21.208420] /lava-398502/1/../bin/lava-test-case <8>[ 21.251272] /lava-398502/1/../bin/lava-test-case <8>[ 21.305849] /lava-398502/1/../bin/lava-test-case <8>[ 21.358522] /lava-398502/1/../bin/lava-test-case <8>[ 21.400975] /lava-398502/1/../bin/lava-test-case <8>[ 21.454528] /lava-398502/1/../bin/lava-test-case <8>[ 22.503794] /lava-398502/1/../bin/lava-test-case <8>[ 23.554220] /lava-398502/1/../bin/lava-test-case <8>[ 23.588191] /lava-398502/1/../bin/lava-test-case <8>[ 23.621779] /lava-398502/1/../bin/lava-test-case <8>[ 23.664813] /lava-398502/1/../bin/lava-test-case <8>[ 23.717873] /lava-398502/1/../bin/lava-test-case <8>[ 23.761487] /lava-398502/1/../bin/lava-test-case <8>[ 24.822494] /lava-398502/1/../bin/lava-test-case <8>[ 25.881797] /lava-398502/1/../bin/lava-test-case <8>[ 25.924724] /lava-398502/1/../bin/lava-test-case <8>[ 25.978677] /lava-398502/1/../bin/lava-test-case <8>[ 26.032413] /lava-398502/1/../bin/lava-test-case <8>[ 26.076477] /lava-398502/1/../bin/lava-test-case <8>[ 26.130601] /lava-398502/1/../bin/lava-test-case <8>[ 26.174741] /lava-398502/1/../bin/lava-test-case <8>[ 26.228400] /lava-398502/1/../bin/lava-test-case <8>[ 27.277741] /lava-398502/1/../bin/lava-test-case <8>[ 28.328631] /lava-398502/1/../bin/lava-test-case <8>[ 29.378865] /lava-398502/1/../bin/lava-test-case <8>[ 30.429874] /lava-398502/1/../bin/lava-test-case <8>[ 30.474031] /lava-398502/1/../bin/lava-test-case <8>[ 30.527268] /lava-398502/1/../bin/lava-test-case <8>[ 31.576528] /lava-398502/1/../bin/lava-test-case <8>[ 32.627188] /lava-398502/1/../bin/lava-test-case <8>[ 32.669683] /lava-398502/1/../bin/lava-test-case <8>[ 32.723283] /lava-398502/1/../bin/lava-test-case <8>[ 33.772520] /lava-398502/1/../bin/lava-test-case <8>[ 34.823116] /lava-398502/1/../bin/lava-test-case <8>[ 35.872748] /lava-398502/1/../bin/lava-test-case <8>[ 36.923251] /lava-398502/1/../bin/lava-test-case <8>[ 37.972660] /lava-398502/1/../bin/lava-test-case <8>[ 39.023206] /lava-398502/1/../bin/lava-test-case <8>[ 40.073253] /lava-398502/1/../bin/lava-test-case <8>[ 41.123378] /lava-398502/1/../bin/lava-test-case <8>[ 42.173121] /lava-398502/1/../bin/lava-test-case <8>[ 43.223234] /lava-398502/1/../bin/lava-test-case <8>[ 44.273232] /lava-398502/1/../bin/lava-test-case <8>[ 45.323476] /lava-398502/1/../bin/lava-test-case <8>[ 46.373423] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-398502/1/../bin/lava-test-case <8>[ 46.418951] /lava-398502/1/../bin/lava-test-case <8>[ 47.478798] /lava-398502/1/../bin/lava-test-case <8>[ 48.527302] + set +x <8>[ 48.544975] / #