[Enter `^Ec?' for help] U-Boot 2021.10+dfsg-1+apertis10bv2023dev2b2 (Apr 18 2022 - 16:34:49 +0000) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPIFlash... SF: Detected gd25q16 with page size 256 Bytes, erase size 4 KiB, total 2 MiB OK In: serial Out: serial Err: serial Net: using phy at 7 FEC [PRIME], usb_ether Error: usb_ether address not set. starting USB... Bus usb@2184000: usb dr_mode not found Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.201.34 (8 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x10000000 12403148/tftp-deploy-ofg3jnbf/kernel/zImage tftp 0x10000000 12403148/tftp-deploy-ofg3jnbf/kernel/zImage Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.34 Filename '12403148/tftp-deploy-ofg3jnbf/kernel/zImage'. Load address: 0x10000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################# 13.9 MiB/s done Bytes transferred = 8831488 (86c200 hex) => tftp 0x14000000 12403148/tftp-deploy-ofg3jnbf/ramdisk/ramdisk.cpio.gz.uboot tftp 0x14000000 12403148/tftp-deploy-ofg3jnbf/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.34 Filename '12403148/tftp-deploy-ofg3jnbf/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x14000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 13.9 MiB/s done Bytes transferred = 9425465 (8fd239 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x13f00000 12403148/tftp-deploy-ofg3jnbf/dtb/imx6q-sabrelite.dtb tftp 0x13f00000 12403148/tftp-deploy-ofg3jnbf/dtb/imx6q-sabrelite.dtb Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.34 Filename '12403148/tftp-deploy-ofg3jnbf/dtb/imx6q-sabrelite.dtb'. Load address: 0x13f00000 Loading: *### 10 MiB/s done Bytes transferred = 41818 (a35a hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/12403148/extract-nfsrootfs-mbc9e083,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/12403148/extract-nfsrootfs-mbc9e083,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x10000000 0x14000000 0x13f00000 bootz 0x10000000 0x14000000 0x13f00000 Kernel image @ 0x10000000 [ 0x000000 - 0x86c200 ] ## Loading init Ramdisk from Legacy Image at 14000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9425401 Bytes = 9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 13f00000 Booting using the fdt blob at 0x13f00000 Using Device Tree in place at 13f00000, end 13f0d359 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.299-cip105-rt34 (KernelCI@build-j60885-arm-gcc-10-multi-v7-defconfig-preempt-rt-n2dlk) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Thu Dec 28 20:09:58 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') <6>[ 0.000000] bootconsole [ec_imx21] enabled <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] efi: Getting EFI parameters from FDT: <6>[ 0.000000] efi: UEFI not found. <3>[ 0.000000] OF: fdt: Reserved memory: unsupported node format, ignoring <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/12403148/extract-nfsrootfs-mbc9e083,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 942380K/1048576K available (12288K kernel code, 1636K rwdata, 4696K rodata, 2048K init, 406K bss, 40660K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. <6>[ 0.000000] No expedited grace period (rcu_normal_after_boot). <6>[ 0.000000] Tasks RCU enabled. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.003018] Console: colour dummy device 80x30 <6>[ 0.282348] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.282357] CPU: Testing write buffer coherency: ok <6>[ 0.282397] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.282402] pid_max: default: 32768 minimum: 301 <6>[ 0.282562] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.282582] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.283748] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.329099] Setting up static identity map for 0x10300000 - 0x103000a0 <6>[ 0.336810] rcu: Hierarchical SRCU implementation. <6>[ 0.343977] EFI services will not be available. <6>[ 0.346315] smp: Bringing up secondary CPUs ... <6>[ 0.352117] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.352124] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.353676] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.353682] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.355210] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.355216] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.355355] smp: Brought up 1 node, 4 CPUs <6>[ 0.390534] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.396967] CPU: All CPU(s) started in SVC mode. <6>[ 0.403058] devtmpfs: initialized <6>[ 0.418158] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.423868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.433355] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.443063] pinctrl core: initialized pinctrl subsystem <6>[ 0.447944] DMI not present or invalid. <6>[ 0.450749] NET: Registered protocol family 16 <6>[ 0.460366] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.468047] cpuidle: using governor menu <6>[ 0.469645] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.488747] vdd1p1: supplied by regulator-dummy <6>[ 0.491453] vdd3p0: supplied by regulator-dummy <6>[ 0.496229] vdd2p5: supplied by regulator-dummy <6>[ 0.501024] vddarm: supplied by regulator-dummy <6>[ 0.506067] vddpu: supplied by regulator-dummy <6>[ 0.510260] vddsoc: supplied by regulator-dummy <6>[ 0.534799] No ATAGs? <6>[ 0.534931] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.542877] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.553787] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.560748] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.574928] Serial: AMBA PL011 UART driver <6>[ 0.579638] console [pstore-1] enabled <6>[ 0.581019] pstore: Registered ramoops as persistent store backend <6>[ 0.587235] ramoops: attached 0x10000@0x30000000, ecc: 0/0 <6>[ 0.628952] mxs-dma 110000.dma-apbh: initialized <6>[ 0.641528] vgaarb: loaded <5>[ 0.642966] SCSI subsystem initialized <6>[ 0.646224] usbcore: registered new interface driver usbfs <6>[ 0.651458] usbcore: registered new interface driver hub <6>[ 0.657016] usbcore: registered new device driver usb <6>[ 0.664296] i2c i2c-0: IMX I2C adapter registered <6>[ 0.667235] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.673860] i2c i2c-1: IMX I2C adapter registered <6>[ 0.677759] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.684101] i2c i2c-2: IMX I2C adapter registered <6>[ 0.688285] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.695866] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.699065] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.708488] PTP clock support registered <6>[ 0.712978] EDAC MC: Ver: 3.0.0 <6>[ 0.719987] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.820297] NET: Registered protocol family 2 <6>[ 0.822547] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.830241] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.837083] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.844448] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) <6>[ 0.851508] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.858010] UDP hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.863992] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.870838] NET: Registered protocol family 1 <6>[ 0.875936] RPC: Registered named UNIX socket transport module. <6>[ 0.881320] RPC: Registered udp transport module. <6>[ 0.886274] RPC: Registered tcp transport module. <6>[ 0.891237] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.898573] Trying to unpack rootfs image as initramfs... <6>[ 1.704506] Freeing initrd memory: 9208K <4>[ 1.706290] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 1.713564] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 1.724495] Initialise system trusted keyrings <6>[ 1.726719] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.745048] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.749452] NFS: Registering the id_resolver key type <5>[ 1.753659] Key type id_resolver registered <5>[ 1.758042] Key type id_legacy registered <6>[ 1.762372] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.769593] Key type asymmetric registered <5>[ 1.771272] Asymmetric key parser 'x509' registered <6>[ 1.776526] bounce: pool size: 64 pages <6>[ 1.780535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 1.788148] io scheduler noop registered <6>[ 1.792323] io scheduler deadline registered <6>[ 1.797213] io scheduler cfq registered (default) <6>[ 1.801808] io scheduler mq-deadline registered <6>[ 1.806589] io scheduler kyber registered <6>[ 1.841946] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 1.846528] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 1.853682] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 1.860955] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 1.881845] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 1.888757] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <4>[ 1.895592] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 1.895678] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 1.895738] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 1.895876] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 1.896036] PU : no governor for states <6>[ 1.896055] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <6>[ 1.979878] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.988573] SuperH (H)SCI(F) driver initialized <6>[ 1.991872] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 27, base_baud = 5000000) is a IMX <6>[ 2.000761] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 74, base_baud = 5000000) is a IMX <6>[ 2.011181] console [ttymxc1] enabled <6>[ 2.011181] console [ttymxc1] enabled <6>[ 2.016169] bootconsole [ec_imx21] disabled <6>[ 2.016169] bootconsole [ec_imx21] disabled <6>[ 2.026776] msm_serial: driver initialized <6>[ 2.032604] STMicroelectronics ASC driver initialized <6>[ 2.040422] STM32 USART driver initialized <4>[ 2.058587] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.067314] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.074353] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.081153] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.090211] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.097386] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.116839] brd: module loaded <6>[ 2.131483] loop: module loaded <6>[ 2.139275] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 2.147478] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 2.155761] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 2.164218] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <6>[ 2.175041] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 2.182306] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 2.191373] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 2.202623] scsi host0: ahci-imx <6>[ 2.206912] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 77 <6>[ 2.230734] CAN device driver interface <6>[ 2.236447] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <4>[ 2.243823] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 2.252816] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.262283] pps pps0: new PPS source ptp0 <6>[ 2.288310] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.296040] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 2.302149] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.308427] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 2.315663] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.329137] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 2.336878] usbcore: registered new interface driver pegasus <6>[ 2.342892] usbcore: registered new interface driver asix <6>[ 2.348612] usbcore: registered new interface driver ax88179_178a <6>[ 2.355037] usbcore: registered new interface driver cdc_ether <6>[ 2.361219] usbcore: registered new interface driver smsc75xx <6>[ 2.367317] usbcore: registered new interface driver smsc95xx <6>[ 2.373403] usbcore: registered new interface driver net1080 <6>[ 2.379380] usbcore: registered new interface driver cdc_subset <6>[ 2.385625] usbcore: registered new interface driver zaurus <6>[ 2.391575] usbcore: registered new interface driver cdc_ncm <6>[ 2.401545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 2.408347] ehci-pci: EHCI PCI platform driver <6>[ 2.413124] ehci-platform: EHCI generic platform driver <6>[ 2.418987] ehci-orion: EHCI orion driver <6>[ 2.423583] SPEAr-ehci: EHCI SPEAr driver <6>[ 2.428138] ehci-st: EHCI STMicroelectronics driver <6>[ 2.433579] ehci-exynos: EHCI EXYNOS driver <6>[ 2.438302] ehci-atmel: EHCI Atmel driver <6>[ 2.442857] tegra-ehci: Tegra EHCI driver <6>[ 2.447456] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 2.453932] ohci-pci: OHCI PCI platform driver <6>[ 2.458711] ohci-platform: OHCI generic platform driver <6>[ 2.464559] SPEAr-ohci: OHCI SPEAr driver <6>[ 2.469109] ohci-st: OHCI STMicroelectronics driver <6>[ 2.474534] ohci-atmel: OHCI Atmel driver <6>[ 2.480162] usbcore: registered new interface driver usb-storage <6>[ 2.489357] imx_usb 2184000.usb: Linked as a consumer to regulator.9 <6>[ 2.502490] imx_usb 2184200.usb: Linked as a consumer to regulator.14 <6>[ 2.512940] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 2.518146] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 2.541610] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 2.547316] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 2.550043] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 2.551076] hub 1-0:1.0: USB hub found <6>[ 2.551126] hub 1-0:1.0: 1 port detected <6>[ 2.560420] i2c /dev entries driver <6>[ 2.571479] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <6>[ 2.580526] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 2.593777] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.600233] sdhci: Copyright(c) Pierre Ossman <6>[ 2.607759] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.616666] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.623582] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO <6>[ 2.629026] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO <6>[ 2.634594] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 <6>[ 2.674956] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <6>[ 2.684060] sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO <6>[ 2.689681] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 <6>[ 2.728557] mmc0: new high speed SDHC card at address 0001 <6>[ 2.730402] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA <6>[ 2.736674] usbcore: registered new interface driver usbhid <6>[ 2.736678] usbhid: USB HID core driver <6>[ 2.744810] NET: Registered protocol family 10 <6>[ 2.746365] Segment Routing with IPv6 <6>[ 2.746464] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.747303] NET: Registered protocol family 17 <6>[ 2.747324] can: controller area network core (rev 20170425 abi 9) <6>[ 2.747447] NET: Registered protocol family 29 <6>[ 2.747459] can: raw protocol (rev 20170425) <6>[ 2.747470] can: broadcast manager protocol (rev 20170425 t) <6>[ 2.747487] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 2.748054] Key type dns_resolver registered <6>[ 2.749729] cpu cpu0: Linked as a consumer to regulator.4 <6>[ 2.749829] cpu cpu0: Linked as a consumer to regulator.5 <6>[ 2.749951] cpu cpu0: Linked as a consumer to regulator.6 <6>[ 2.751284] ThumbEE CPU extension supported. <5>[ 2.751302] Registering SWP/SWPB emulation handler <5>[ 2.752741] Loading compiled-in X.509 certificates <6>[ 2.754594] pstore: Using compression: deflate <6>[ 2.780730] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.780833] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.782741] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.782828] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.784698] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.784772] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.784874] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.786392] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.786462] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.786560] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.788941] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C <6>[ 2.790269] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.790358] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.791989] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.792077] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.793876] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.793947] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.794050] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.795562] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.795650] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.795750] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.797075] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.797162] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.798643] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.798729] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.800615] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.800689] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.800787] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.802321] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.802411] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.802512] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.805771] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 2.806157] hctosys: unable to open rtc device (rtc0) <6>[ 2.807658] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.807750] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.809425] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.809514] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.821566] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.821645] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.821749] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.823302] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.823375] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.823475] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.840047] usb 1-1: new high-speed USB device number 2 using ci_hdrc <6>[ 2.920722] Micrel KSZ9021 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 2.920911] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 3.047656] hub 1-1:1.0: USB hub found <6>[ 3.047865] hub 1-1:1.0: 3 ports detected <6>[ 3.193370] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 3.200783] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 3.209543] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 3.211382] mmcblk0: mmc0:0001 SD 14.8 GiB <6>[ 3.222054] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 3.232493] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 3.242263] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 3.249267] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 3.253103] GPT:Primary header thinks Alt. header is not at the end of the disk. <4>[ 3.253108] GPT:29296874 != 30965759 <4>[ 3.253111] GPT:Alternate GPT header not at the end of the disk. <4>[ 3.253115] GPT:29296874 != 30965759 <4>[ 3.253118] GPT: Use GNU Parted to correct GPT errors. <6>[ 3.253161] mmcblk0: p1 p2 p3 <4>[ 3.289334] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 3.298381] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 3.305543] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 3.313670] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 3.321076] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 3.329689] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 3.337180] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 3.346154] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 3.354848] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 3.361832] panel-simple panel-lcd: Dropping the link to regulator.0 <6>[ 6.070903] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 6.080161] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.110116] Sending DHCP requests ., OK <6>[ 6.154369] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.34 <6>[ 6.162669] IP-Config: Complete: <6>[ 6.166196] device=eth0, hwaddr=00:19:b8:08:f1:10, ipaddr=192.168.201.34, mask=255.255.255.0, gw=192.168.201.1 <6>[ 6.176911] host=imx6q-sabrelite-lava-cbg-4, domain=lava-rack, nis-domain=(none) <6>[ 6.185078] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 6.185082] nameserver0=192.168.201.1 <6>[ 6.203350] Freeing unused kernel memory: 2048K <6>[ 6.208474] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u2 <4>[ 7.547309] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 7.553076] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 7.553434] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 7.553754] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) <6>[ 7.553766] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 7.584280] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 7.586089] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 7.586547] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 7.609862] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.617838] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 7.629319] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 7.635701] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 7.644966] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 7.652584] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 7.672122] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 7.682020] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 7.689054] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 7.709753] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 7.719135] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 7.726346] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 7.742343] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 <6>[ 7.759295] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.766717] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 7.780444] flexcan 2090000.flexcan: Linked as a consumer to regulator.10 <6>[ 7.803640] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 7.814706] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 7.834424] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 7.839790] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=35) <6>[ 7.850999] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 7.858007] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 7.866772] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 7.876530] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 7.883739] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 7.894585] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 7.902020] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 7.922256] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 7.929772] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 7.942343] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 7.952933] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 7.960187] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 8.130903] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 8.141150] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 8.148394] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 8.160965] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 8.168544] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 8.177215] sgtl5000 0-000a: Linked as a consumer to regulator.7 <6>[ 8.183992] sgtl5000 0-000a: Linked as a consumer to regulator.8 <6>[ 8.194824] sgtl5000 0-000a: sgtl5000 revision 0x11 <6>[ 8.194893] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 8.194987] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <6>[ 8.220815] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum <4>[ 8.226341] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 8.226609] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 8.226720] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 8.286342] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 8.298682] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 8.305870] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 8.322061] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 8.330873] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 8.344381] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 8.351908] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 8.372073] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 8.381784] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 8.388792] panel-simple panel-lcd: Dropping the link to regulator.0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. IP-Config: eth0 hardware address 00:19:b8:08:f1:10 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.201.1): address: 192.168.201.34 broadcast: 192.168.201.255 netmask: 255.255.255.0 gateway: 192.168.201.1 dns0 : 192.168.201.1 dns1 : 0.0.0.0 host : imx6q-sabrelite-lava-cbg-4 domain : lava-rack rootserver: 192.168.201.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 9.766048] systemd[1]: System time before build time, advancing clock. <3>[ 9.800530] cgroup: cgroup2: unknown option "memory_recursiveprot" <30>[ 9.817720] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) <30>[ 9.841835] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! <30>[ 9.882796] systemd[1]: Set hostname to . <30>[ 10.788898] systemd[1]: Queued start job for default target Graphical Interface. <5>[ 10.798280] random: systemd: uninitialized urandom read (16 bytes read) <28>[ 10.805364] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>[ 10.818084] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>[ 10.827810] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. <5>[ 10.880567] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 10.888960] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. <5>[ 10.930473] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 10.938797] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. <30>[ 10.981639] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. <30>[ 11.020679] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. <30>[ 11.061231] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. <30>[ 11.100898] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <30>[ 11.113198] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. <30>[ 11.151023] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. <30>[ 11.191043] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. <30>[ 11.230292] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. <30>[ 11.260908] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. <30>[ 11.290904] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. <30>[ 11.370799] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <30>[ 11.381064] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). <30>[ 11.422372] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. <30>[ 11.463059] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. <30>[ 11.504256] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. <30>[ 11.542108] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. <30>[ 11.581635] systemd[1]: Condition check resulted in Huge Pages File System being skipped. <30>[ 11.591114] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. <30>[ 11.604675] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... <30>[ 11.644882] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... <30>[ 11.685224] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... <30>[ 11.736657] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... <30>[ 11.774141] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... <5>[ 11.810686] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 11.821919] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... <30>[ 11.866703] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <5>[ 11.876964] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 11.888340] systemd[1]: Starting Journal Service... Starting Journal Service... <5>[ 11.926036] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 11.936725] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... <30>[ 11.974956] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... <30>[ 12.014239] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... <30>[ 12.056864] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. <30>[ 12.091460] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. <30>[ 12.132610] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. <30>[ 12.193370] systemd[1]: modprobe@configfs.service: Succeeded. <30>[ 12.201597] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. <30>[ 12.242887] systemd[1]: modprobe@drm.service: Succeeded. <30>[ 12.250943] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. <30>[ 12.292225] systemd[1]: modprobe@fuse.service: Succeeded. <30>[ 12.299325] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. <30>[ 12.341226] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... Starting Apply Kernel Variables... <46>[ 12.567506] systemd-journald[201]: Received client request to flush runtime journal. Starting Create System Users... [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. <5>[ 12.921477] random: systemd: uninitialized urandom read (16 bytes read) Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. <5>[ 13.125236] random: systemd-journal: uninitialized urandom read (16 bytes read) <5>[ 13.134831] random: systemd-journal: uninitialized urandom read (16 bytes read) [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Coldplug All udev Devices. <5>[ 13.690067] random: crng init done <5>[ 13.693770] random: 48 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Rule-based Manager for Device Events and Files. Starting Network Service... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting User Login Management... [ OK ] Started Network Service. Starting Network Name Resolution... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started User Login Management. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Permit User Sessions... [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Found device /dev/ttymxc1. [ OK ] Started Serial Getty on ttymxc1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. Debian GNU/Linux 11 debian-bullseye-armhf ttymxc1 debian-bullseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 4.19.299-cip105-rt34 #1 SMP PREEMPT RT Thu Dec 28 20:09:58 UTC 2023 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/12403148/extract-nfsrootfs-mbc9e083' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/12403148/extract-nfsrootfs-mbc9e083' / # export NFS_SERVER_IP='192.168.201.1' export NFS_SERVER_IP='192.168.201.1' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-12403148/environment . /lava-12403148/environment / # /lava-12403148/bin/lava-test-runner /lava-12403148/0 /lava-12403148/bin/lava-test-runner /lava-12403148/0 + export TESTRUN_ID=0_dmesg + cd /lava-12403148/0/tests/0_dmesg + cat uuid + UUID=12403148_1.6.2.4.1<8>[ 26.779046] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 26.865944] <8>[ 26.936222] <8>[ 27.006361] + set<8>[ 27.016117] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-12403148/environment / # . /lava-12403148/environment/lava-12403148/bin/lava-test-runner /lava-12403148/1 / # /lava-12403148/bin/lava-test-runner /lava-12403148/1 + export TESTRUN_ID=1_bootrr + cd /lava-12403148/1/tests/1_bootrr + cat uuid + UUID=12403148_1.6.2.4.5<8>[ 27.576155] + set +x + export PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-12403148/1/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto panel-lvds0 backlight-lcd backlight-lvds panel-lcd /lava-12403148/1/../bin/lava-test-case <8>[ 28.698717] /lava-12403148/1/../bin/lava-test-case <8>[ 28.768841] /lava-12403148/1/../bin/lava-test-case <8>[ 28.806744] + set<8>[ 28.835719] +x / #