connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/756133/tftp-deploy-ugqbtk_o/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/756133/tftp-deploy-ugqbtk_o/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/756133/tftp-deploy-ugqbtk_o/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/756133/tftp-deploy-ugqbtk_o/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/756133/tftp-deploy-ugqbtk_o/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/756133/tftp-deploy-ugqbtk_o/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address be:bb:aa:04:ea:5f T eth0: DHCP client bound to address 10.8.254.194 Loading ARM Linux zImage '/mnt/tftp/756133/tftp-deploy-ugqbtk_o/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12892000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/756133/tftp-deploy-ugqbtk_o/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d3fc2 Loading devicetree from '/mnt/tftp/756133/tftp-deploy-ugqbtk_o/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12892000, initrd at 0x18000000, oftree at 0x188d4000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.249-cip76 (KernelCI@build-j267209-arm-gcc-10-imx-v6-v7-defconfig-ppjks) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Tue Jun 28 02:40:11 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978984K/2097152K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 52632K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000038] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001589] Console: colour dummy device 80x30 [ 0.001631] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001649] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001668] ... MAX_LOCK_DEPTH: 48 [ 0.001685] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001702] ... CLASSHASH_SIZE: 4096 [ 0.001718] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001735] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001751] ... CHAINHASH_SIZE: 32768 [ 0.001768] memory used by lock dependency info: 4655 kB [ 0.001786] per task-struct memory footprint: 1536 bytes [ 0.001885] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001913] pid_max: default: 32768 minimum: 301 [ 0.002305] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002341] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005236] CPU: Testing write buffer coherency: ok [ 0.005328] CPU0: Spectre v2: using BPIALL workaround [ 0.006750] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008984] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009785] rcu: Hierarchical SRCU implementation. [ 0.011688] smp: Bringing up secondary CPUs ... [ 0.014144] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014157] CPU1: Spectre v2: using BPIALL workaround [ 0.016899] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.016910] CPU2: Spectre v2: using BPIALL workaround [ 0.019115] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.019125] CPU3: Spectre v2: using BPIALL workaround [ 0.019486] smp: Brought up 1 node, 4 CPUs [ 0.019511] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.019533] CPU: All CPU(s) started in SVC mode. [ 0.022288] devtmpfs: initialized [ 0.047268] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.049982] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.050049] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.053988] pinctrl core: initialized pinctrl subsystem [ 0.059361] NET: Registered protocol family 16 [ 0.079765] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.083110] cpuidle: using governor menu [ 0.083320] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.099333] vdd1p1: supplied by regulator-dummy [ 0.100916] vdd3p0: supplied by regulator-dummy [ 0.102206] vdd2p5: supplied by regulator-dummy [ 0.103427] vddarm: supplied by regulator-dummy [ 0.105173] vddpu: supplied by regulator-dummy [ 0.106035] vddsoc: supplied by regulator-dummy [ 0.131984] No ATAGs? [ 0.132442] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.132552] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.134925] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.135797] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.197501] mxs-dma 110000.dma-apbh: initialized [ 0.200485] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.200518] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.200546] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.200568] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.200646] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.203642] vgaarb: loaded [ 0.204687] SCSI subsystem initialized [ 0.205941] usbcore: registered new interface driver usbfs [ 0.206142] usbcore: registered new interface driver hub [ 0.206269] usbcore: registered new device driver usb [ 0.209291] i2c i2c-0: IMX I2C adapter registered [ 0.209339] i2c i2c-0: can't use DMA, using PIO instead. [ 0.211108] i2c i2c-1: IMX I2C adapter registered [ 0.211151] i2c i2c-1: can't use DMA, using PIO instead. [ 0.212477] i2c i2c-2: IMX I2C adapter registered [ 0.212519] i2c i2c-2: can't use DMA, using PIO instead. [ 0.212866] media: Linux media interface: v0.10 [ 0.212977] videodev: Linux video capture interface: v2.00 [ 0.213411] pps_core: LinuxPPS API ver. 1 registered [ 0.213434] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.213490] PTP clock support registered [ 0.214262] Advanced Linux Sound Architecture Driver Initialized. [ 0.217646] Bluetooth: Core ver 2.22 [ 0.217767] NET: Registered protocol family 31 [ 0.217791] Bluetooth: HCI device and connection manager initialized [ 0.217902] Bluetooth: HCI socket layer initialized [ 0.217939] Bluetooth: L2CAP socket layer initialized [ 0.218133] Bluetooth: SCO socket layer initialized [ 0.220337] clocksource: Switched to clocksource mxc_timer1 [ 0.444042] VFS: Disk quotas dquot_6.6.0 [ 0.444215] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.471716] NET: Registered protocol family 2 [ 0.472311] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.474793] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.474920] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.475083] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.476216] TCP: Hash tables configured (established 8192 bind 8192) [ 0.476912] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.477117] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.477736] NET: Registered protocol family 1 [ 0.479757] RPC: Registered named UNIX socket transport module. [ 0.479833] RPC: Registered udp transport module. [ 0.479855] RPC: Registered tcp transport module. [ 0.479876] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.482224] Trying to unpack rootfs image as initramfs... [ 1.437701] Freeing initrd memory: 9040K [ 1.439075] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.439793] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.444702] Initialise system trusted keyrings [ 1.445539] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.461923] NFS: Registering the id_resolver key type [ 1.462095] Key type id_resolver registered [ 1.462177] Key type id_legacy registered [ 1.462354] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.463945] fuse init (API version 7.27) [ 1.476325] Key type asymmetric registered [ 1.476503] Asymmetric key parser 'x509' registered [ 1.476766] bounce: pool size: 64 pages [ 1.476884] io scheduler noop registered [ 1.476910] io scheduler deadline registered [ 1.477251] io scheduler cfq registered (default) [ 1.477280] io scheduler mq-deadline registered [ 1.477304] io scheduler kyber registered [ 1.492845] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.493100] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.495740] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.496224] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.496451] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.496870] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.497363] PU : no governor for states [ 1.497423] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.500985] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.501868] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.501895] pfuze100-regulator 2-0008: pfuze100 found. [ 1.529039] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.495172] console [ttymxc0] enabled [ 2.501935] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.526624] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.532956] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.539115] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.544901] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.554268] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.562342] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.568463] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.577473] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.587621] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.594454] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.601241] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.608510] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.615325] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.622119] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.629775] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.638473] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.643478] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.652489] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.659183] [drm] No driver support for vblank timestamp query. [ 2.666688] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.674476] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.682297] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.689990] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.698602] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.713530] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.722019] [drm] Cannot find any crtc or sizes [ 2.729487] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.737555] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.765867] brd: module loaded [ 2.799002] loop: module loaded [ 2.804336] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.812399] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.820473] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.828670] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.839779] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.846865] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.855740] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.868327] scsi host0: ahci-imx [ 2.873223] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.889606] CAN device driver interface [ 2.896323] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.906368] pps pps0: new PPS source ptp0 [ 2.948871] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.956798] usbcore: registered new interface driver asix [ 2.962385] usbcore: registered new interface driver ax88179_178a [ 2.968577] usbcore: registered new interface driver cdc_ether [ 2.974664] usbcore: registered new interface driver net1080 [ 2.980485] usbcore: registered new interface driver cdc_subset [ 2.986516] usbcore: registered new interface driver zaurus [ 2.992391] usbcore: registered new interface driver cdc_ncm [ 2.998071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.004670] ehci-pci: EHCI PCI platform driver [ 3.009230] ehci-mxc: Freescale On-Chip EHCI Host driver [ 3.015563] usbcore: registered new interface driver usb-storage [ 3.025739] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.034403] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 3.044577] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.050090] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.080374] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.089979] hub 1-0:1.0: USB hub found [ 3.094108] hub 1-0:1.0: 1 port detected [ 3.110185] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.116752] i2c /dev entries driver [ 3.130476] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.137190] Bluetooth: HCI UART driver ver 2.3 [ 3.141720] Bluetooth: HCI UART protocol H4 registered [ 3.146965] Bluetooth: HCI UART protocol LL registered [ 3.153752] sdhci: Secure Digital Host Controller Interface driver [ 3.159951] sdhci: Copyright(c) Pierre Ossman [ 3.164370] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.171449] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.212724] ata1: SATA link down (SStatus 0 SControl 300) [ 3.213212] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.218431] ahci-imx 2200000.sata: no device found, disabling link. [ 3.232016] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.262078] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.271904] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.280212] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.290732] mmc0: new high speed SDHC card at address 1234 [ 3.302252] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.325328] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.340161] caam 2100000.caam: Entropy delay = 3200 [ 3.390921] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.405939] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.466698] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.471738] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.478197] caam 2100000.caam: job rings = 2, qi = 0 [ 3.501744] caam algorithms registered in /proc/crypto [ 3.513106] caam_jr 2101000.jr0: registering rng-caam [ 3.519806] usbcore: registered new interface driver usbhid [ 3.525505] usbhid: USB HID core driver [ 3.535518] imx-media: subdev ipu1_vdic bound [ 3.540216] imx-media: subdev ipu2_vdic bound [ 3.545239] imx-media: subdev ipu1_ic_prp bound [ 3.551551] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.558959] imx-media: subdev ipu1_ic_prpenc bound [ 3.564498] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.571607] imx-media: subdev ipu1_ic_prpvf bound [ 3.576490] imx-media: subdev ipu2_ic_prp bound [ 3.578239] mmc2: new DDR MMC card at address 0001 [ 3.586137] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.588522] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.593542] imx-media: subdev ipu2_ic_prpenc bound [ 3.599421] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.608965] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.610571] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.616104] imx-media: subdev ipu2_ic_prpvf bound [ 3.622887] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.635180] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.636980] mmcblk2: p1 p2 [ 3.642158] hub 1-1:1.0: USB hub found [ 3.648414] imx-media: subdev ipu1_csi0 bound [ 3.652933] hub 1-1:1.0: 4 ports detected [ 3.658028] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.664454] imx-media: subdev ipu1_csi1 bound [ 3.670730] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.677044] imx-media: subdev ipu2_csi0 bound [ 3.682348] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.688554] imx-media: subdev ipu2_csi1 bound [ 3.702646] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.708954] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.716985] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.727414] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.751021] [drm] Cannot find any crtc or sizes [ 3.774339] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.784556] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.200680] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.224370] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.236436] NET: Registered protocol family 10 [ 4.244760] Segment Routing with IPv6 [ 4.248673] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.256641] NET: Registered protocol family 17 [ 4.261215] can: controller area network core (rev 20170425 abi 9) [ 4.267612] NET: Registered protocol family 29 [ 4.272137] can: raw protocol (rev 20170425) [ 4.276561] can: broadcast manager protocol (rev 20170425 t) [ 4.282325] can: netlink gateway (rev 20170425) max_hops=1 [ 4.288532] Key type dns_resolver registered [ 4.294768] cpu cpu0: Linked as a consumer to regulator.4 [ 4.300493] cpu cpu0: Linked as a consumer to regulator.5 [ 4.306215] cpu cpu0: Linked as a consumer to regulator.6 [ 4.316597] Registering SWP/SWPB emulation handler [ 4.325461] Loading compiled-in X.509 certificates [ 4.400141] imx-media: subdev ipu1_csi0_mux bound [ 4.405743] imx-media: subdev ipu2_csi1_mux bound [ 4.410707] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.415617] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.420393] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.425470] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.430409] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.435151] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.440046] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.444831] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.449726] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.454503] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.459579] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.464969] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.470213] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.475587] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.480874] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.485771] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.499504] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.514775] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.524138] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed [ 4.530944] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.578686] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.587204] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.596914] ALSA device list: [ 4.599905] #0: imx6-wandboard-sgtl5000 [ 4.604005] #1: imx-spdif [ 4.608941] cfg80211: failed to load regulatory.db [ 4.618909] Freeing unused kernel memory: 1024K [ 4.671678] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.962560] udevd[185]: starting version 3.2.9 [ 4.969320] random: udevd: uninitialized urandom read (16 bytes read) [ 4.977345] random: udevd: uninitialized urandom read (16 bytes read) [ 4.984399] random: udevd: uninitialized urandom read (16 bytes read) [ 5.000750] udevd[185]: specified user 'tss' unknown [ 5.005902] udevd[185]: specified group 'tss' unknown [ 5.016717] udevd[186]: starting eudev-3.2.9 [ 5.589068] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.598497] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.610933] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.622275] coda 2040000.vpu: firmware request failed done Saving random seed: OK Starting network: OK Starting dropbear sshd: [ 6.170506] urandom_read_iter: 2 callbacks suppressed [ 6.170519] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-756133/environment . /lava-756133/environment / # /lava-756133/bin/lava-test-runner /lava-756133/0 /lava-756133/bin/lava-test-runner /lava-756133/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-756133/0/tests/0_dmesg + cat uuid + UUID=756133_1.5.2.3.1[ 6.863355] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.952562] [ 7.028026] [ 7.107174] + set +x [ 7.117934] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-756133/environment / # . /lava-756133/environment/lava-756133/bin/lava-test-runner /lava-756133/1 / # /lava-756133/bin/lava-test-runner /lava-756133/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-756133/1/tests/1_bootrr + cat uuid + UUID=756133_1.5.2.3.5 [ 7.691002] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-756133/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-756133/1/../bin/lava-test-case [ 8.795683] /lava-756133/1/../bin/lava-test-case [ 8.877196] /lava-756133/1/../bin/lava-test-case [ 8.922345] + set +x[ 8.955625] / #