Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.11-rc2-00101-g1ed3c0954b (Oct 25 2018 - 13:13:23 +0200) OMAP4430-GP ES2.1 Trying to boot from MMC1 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! U-Boot 2018.11-rc2-00101-g1ed3c0954b (Oct 25 2018 - 13:13:23 +0200) CPU : OMAP4430-GP ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Loading Environment from FAT... Unable to use mmc 0:1... Net: No ethernet found. Hit any key to stop autoboot: 2  0 => usb start usb start starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client bound to address 10.201.3.110 (11 ms) => setenv serverip 10.201.1.8 setenv serverip 10.201.1.8 => tftp 0x82000000 2133222/tftp-deploy-vmt1_3z5/kernel/zImage tftp 0x82000000 2133222/tftp-deploy-vmt1_3z5/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2133222/tftp-deploy-vmt1_3z5/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ 552.7 KiB/s done Bytes transferred = 4512744 (44dbe8 hex) => tftp 0x84000000 2133222/tftp-deploy-vmt1_3z5/ramdisk/ramdisk.cpio.gz.uboot tftp 0x84000000 2133222/tftp-deploy-vmt1_3z5/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2133222/tftp-deploy-vmt1_3z5/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x84000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 1.3 MiB/s done Bytes transferred = 12681768 (c18228 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x83f00000 2133222/tftp-deploy-vmt1_3z5/dtb/omap4-panda.dtb tftp 0x83f00000 2133222/tftp-deploy-vmt1_3z5/dtb/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2133222/tftp-deploy-vmt1_3z5/dtb/omap4-panda.dtb'. Load address: 0x83f00000 Loading: *###### 29.3 KiB/s done Bytes transferred = 77984 (130a0 hex) =>setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x84000000 0x83f00000 bootz 0x82000000 0x84000000 0x83f00000 ## Loading init Ramdisk from Legacy Image at 84000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12681704 Bytes = 12.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f00000 Booting using the fdt blob at 0x83f00000 Using Device Tree in place at 83f00000, end 83f1609f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.249-cip76 (KernelCI@build-j267195-arm-gcc-10-omap2plus-defconfig-q9zqj) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Tue Jun 28 02:39:08 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI OMAP4 PandaBoard [ 0.000000] earlycon: omap8250 at MMIO 0x48020000 (options '') [ 0.000000] bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] OMAP4: Map 0xbfe00000 to (ptrval) for dram barrier [ 0.000000] OMAP4430 ES2.1 [ 0.000000] percpu: Embedded 17 pages/cpu s38632 r8192 d22808 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 985680K/1046528K available (9216K kernel code, 794K rwdata, 2600K rodata, 1024K init, 7477K bss, 44464K reserved, 16384K cma-reserved, 243712K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 795 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7478 kB) <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <4>[ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 <4>[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 <6>[ 0.000000] L2C-310 erratum 727915 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000 <6>[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz <6>[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns <6>[ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns <6>[ 0.008911] OMAP clocksource: 32k_counter at 32768 Hz <6>[ 0.017181] Console: colour dummy device 80x30 <3>[ 0.022125] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' <3>[ 0.029144] This ensures that you still see kernel messages. Please <3>[ 0.035888] update your kernel commandline. <4>[ 0.040527] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.048767] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.053283] ... MAX_LOCK_DEPTH: 48 <4>[ 0.057861] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.062652] ... CLASSHASH_SIZE: 4096 <4>[ 0.067413] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.072296] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.077148] ... CHAINHASH_SIZE: 32768 <4>[ 0.082031] memory used by lock dependency info: 4655 kB <4>[ 0.087860] per task-struct memory footprint: 1536 bytes <6>[ 0.093780] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) <6>[ 0.186248] pid_max: default: 32768 minimum: 301 <6>[ 0.191864] Security Framework initialized <6>[ 0.196533] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.203674] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.215484] CPU: Testing write buffer coherency: ok <6>[ 0.221008] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.228363] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.237365] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.245178] rcu: Hierarchical SRCU implementation. <6>[ 0.252593] smp: Bringing up secondary CPUs ... <6>[ 0.299407] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.299407] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.312255] smp: Brought up 1 node, 2 CPUs <6>[ 0.316772] SMP: Total of 2 processors activated (2393.70 BogoMIPS). <6>[ 0.323822] CPU: All CPU(s) started in SVC mode. <6>[ 0.333343] devtmpfs: initialized <6>[ 0.409057] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 <6>[ 0.420593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.431091] futex hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.439880] pinctrl core: initialized pinctrl subsystem <6>[ 0.452728] NET: Registered protocol family 16 <6>[ 0.465759] DMA: preallocated 256 KiB pool for atomic coherent allocations <4>[ 0.481811] omap_hwmod: l3_main_3 using broken dt data from ocp <4>[ 0.496215] omap_hwmod: l3_main_2 using broken dt data from ocp <6>[ 0.759277] audit: initializing netlink subsys (disabled) <5>[ 0.765991] audit: type=2000 audit(0.760:1): state=initialized audit_enabled=0 res=1 <6>[ 0.774627] cpuidle: using governor menu <6>[ 0.843383] omap-gpmc 50000000.gpmc: GPMC revision 6.0 <4>[ 0.849151] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 <6>[ 0.881774] No ATAGs? <6>[ 0.882202] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.893524] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.903778] OMAP DMA hardware revision 0.0 <6>[ 0.957061] omap-iommu 4a066000.mmu: 4a066000.mmu registered <6>[ 0.964019] omap-iommu 55082000.mmu: 55082000.mmu registered <6>[ 0.974060] vgaarb: loaded <5>[ 0.978363] SCSI subsystem initialized <6>[ 0.984588] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.990081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.999877] PTP clock support registered <6>[ 1.008728] clocksource: Switched to clocksource 32k_counter <5>[ 1.217102] VFS: Disk quotas dquot_6.6.0 <6>[ 1.221710] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 1.266510] NET: Registered protocol family 2 <6>[ 1.272155] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 1.283020] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 1.291564] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 1.299407] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 1.307678] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.315338] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 1.322021] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 1.329711] NET: Registered protocol family 1 <6>[ 1.336944] RPC: Registered named UNIX socket transport module. <6>[ 1.343536] RPC: Registered udp transport module. <6>[ 1.348754] RPC: Registered tcp transport module. <6>[ 1.353881] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.363189] Trying to unpack rootfs image as initramfs... <6>[ 3.018188] Freeing initrd memory: 12388K <4>[ 3.024017] hw perfevents: no irqs for PMU, sampling events not supported <6>[ 3.032135] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 3.053009] Initialise system trusted keyrings <6>[ 3.059204] workingset: timestamp_bits=14 max_order=18 bucket_order=4 <5>[ 3.069915] NFS: Registering the id_resolver key type <5>[ 3.075592] Key type id_resolver registered <5>[ 3.080352] Key type id_legacy registered <6>[ 3.084991] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.102386] Key type asymmetric registered <5>[ 3.107055] Asymmetric key parser 'x509' registered <6>[ 3.112762] bounce: pool size: 64 pages <6>[ 3.117156] io scheduler noop registered <6>[ 3.121582] io scheduler deadline registered <6>[ 3.126464] io scheduler cfq registered (default) <6>[ 3.131652] io scheduler mq-deadline registered <6>[ 3.136627] io scheduler kyber registered <6>[ 3.150756] OMAP GPIO hardware version 0.1 <6>[ 3.214477] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) <6>[ 3.341064] pinctrl-single 4a31e040.pinmux: 28 pins, size 56 <6>[ 3.349609] pinctrl-single 4a100040.pinmux: 203 pins, size 406 <6>[ 3.378356] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.402587] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 121, base_baud = 3000000) is a 8250 <6>[ 3.412719] console [ttyS2] enabled <6>[ 3.412719] console [ttyS2] enabled <6>[ 3.420501] bootconsole [omap8250] disabled <6>[ 3.420501] bootconsole [omap8250] disabled <6>[ 3.433013] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 132, base_baud = 3000000) is a 8250 <6>[ 3.444854] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 133, base_baud = 3000000) is a 8250 <6>[ 3.456634] 4806e000.serial: ttyS3 at MMIO 0x4806e000 (irq = 134, base_baud = 3000000) is a 8250 <6>[ 3.502471] brd: module loaded <6>[ 3.538970] loop: module loaded <3>[ 3.548278] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.577880] i2c /dev entries driver <4>[ 3.584594] thermal thermal_zone0: failed to read out thermal zone (-5) <6>[ 3.596771] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.603332] sdhci: Copyright(c) Pierre Ossman <6>[ 3.616912] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.624450] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.637023] oprofile: using arm/armv7-ca9 <6>[ 3.642333] Initializing XFRM netlink socket <6>[ 3.647583] NET: Registered protocol family 10 <6>[ 3.656585] Segment Routing with IPv6 <6>[ 3.660827] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.669464] NET: Registered protocol family 17 <6>[ 3.674285] NET: Registered protocol family 15 <5>[ 3.679534] Key type dns_resolver registered <6>[ 3.684234] ThumbEE CPU extension supported. <5>[ 3.688934] Registering SWP/SWPB emulation handler <3>[ 3.694122] twl: not initialized <3>[ 3.697631] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 3.706024] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 3.714447] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 3.722839] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 3.731262] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 3.739654] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 3.747955] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 <6>[ 3.756439] Power Management for TI OMAP4+ devices. <4>[ 3.761688] OMAP4 PM: u-boot >= v2012.07 is required for full PM support <6>[ 3.769012] SmartReflex Class3 initialized <5>[ 3.776947] Loading compiled-in X.509 certificates <4>[ 3.908782] hw-breakpoint: Failed to enable monitor mode on CPU 0. <4>[ 3.918701] hw-breakpoint: CPU 0 failed to disable vector catch <6>[ 3.988067] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz <4>[ 4.000427] Skipping twl internal clock init and using bootloader value (unknown osc rate) <6>[ 4.051757] twl 0-0048: PIH (irq 151) nested IRQs <6>[ 4.096221] twl6040 0-004b: Linked as a consumer to regulator.15 <6>[ 4.104125] twl6040 0-004b: Linked as a consumer to regulator.16 <6>[ 4.115020] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz <6>[ 4.125396] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz <6>[ 4.134033] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz <6>[ 4.142028] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.8 <6>[ 4.151275] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.1 <6>[ 4.192871] omap_hsmmc 480d5000.mmc: Linked as a consumer to regulator.4 <6>[ 4.316467] hctosys: unable to open rtc device (rtc0) <4>[ 4.323394] sr_init: No PMIC hook to init smartreflex <6>[ 4.330322] smartreflex 4a0d9000.smartreflex: omap_sr_probe: SmartReflex driver initialized <6>[ 4.340118] smartreflex 4a0db000.smartreflex: omap_sr_probe: SmartReflex driver initialized <6>[ 4.349761] smartreflex 4a0dd000.smartreflex: omap_sr_probe: SmartReflex driver initialized <4>[ 4.358917] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 4.460205] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 4.471282] mmc0: new high speed SDHC card at address 59b4 <6>[ 4.481109] mmcblk0: mmc0:59b4 USD 3.75 GiB <3>[ 4.788391] print_req_error: I/O error, dev mmcblk0, sector 0 <3>[ 4.795562] print_req_error: I/O error, dev mmcblk0, sector 1 <3>[ 4.802490] print_req_error: I/O error, dev mmcblk0, sector 2 <3>[ 4.809570] print_req_error: I/O error, dev mmcblk0, sector 3 <3>[ 4.816467] print_req_error: I/O error, dev mmcblk0, sector 4 <3>[ 4.823425] print_req_error: I/O error, dev mmcblk0, sector 5 <3>[ 4.830383] print_req_error: I/O error, dev mmcblk0, sector 6 <3>[ 4.837127] print_req_error: I/O error, dev mmcblk0, sector 7 <3>[ 4.843536] Buffer I/O error on dev mmcblk0, logical block 0, async page read <3>[ 4.878845] print_req_error: I/O error, dev mmcblk0, sector 0 <3>[ 4.885711] print_req_error: I/O error, dev mmcblk0, sector 1 <3>[ 4.921508] Buffer I/O error on dev mmcblk0, logical block 0, async page read <6>[ 4.929260] mmcblk0: unable to read partition table <6>[ 16.895904] Freeing unused kernel memory: 1024K <6>[ 16.901885] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 17.286437] udevd[98]: starting version 3.2.9 <5>[ 17.294311] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 17.302032] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 17.309417] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 17.328552] udevd[98]: specified user 'tss' unknown <27>[ 17.337371] udevd[98]: specified group 'tss' unknown <30>[ 17.349761] udevd[99]: starting eudev-3.2.9 <6>[ 17.960174] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec <6>[ 17.999542] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec <4>[ 18.345642] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. <6>[ 18.370605] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC <6>[ 18.386962] usbcore: registered new interface driver usbfs <6>[ 18.394195] usbcore: registered new interface driver hub <6>[ 18.400360] usbcore: registered new device driver usb <6>[ 18.417846] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48:rtc as rtc0 <6>[ 18.523956] Driver for 1-wire Dallas network protocol. <6>[ 18.572570] twl6030_usb 48070000.i2c:twl@48:usb-comparator: Linked as a consumer to regulator.14 <6>[ 18.582336] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.6. Driver in Interrupt mode <4>[ 18.607940] print_req_error: 6 callbacks suppressed <3>[ 18.607940] print_req_error: I/O error, dev mmcblk0, sector 7862144 <3>[ 18.620513] print_req_error: I/O error, dev mmcblk0, sector 7862145 <3>[ 18.627899] print_req_error: I/O error, dev mmcblk0, sector 7862146 <3>[ 18.635162] print_req_error: I/O error, dev mmcblk0, sector 7862147 <3>[ 18.642486] print_req_error: I/O error, dev mmcblk0, sector 7862148 <3>[ 18.649719] print_req_error: I/O error, dev mmcblk0, sector 7862149 <3>[ 18.682159] print_req_error: I/O error, dev mmcblk0, sector 7862150 <3>[ 18.689605] print_req_error: I/O error, dev mmcblk0, sector 7862151 <6>[ 18.697143] twl6030_usb 48070000.i2c:twl@48:usb-comparator: Initialized TWL6030 USB module <3>[ 18.698791] print_req_error: I/O error, dev mmcblk0, sector 7862144 <3>[ 18.712860] print_req_error: I/O error, dev mmcblk0, sector 7862145 <3>[ 18.773162] Buffer I/O error on dev mmcblk0, logical block 982768, async page read <6>[ 18.833831] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d <4>[ 19.009826] power_supply bq27000-battery: power_supply_get_battery_info currently only supports devicetree <6>[ 19.130462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 19.159942] ehci-omap: OMAP-EHCI Host Controller driver <6>[ 19.171020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 19.200622] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400 <6>[ 19.218933] ohci-platform: OHCI generic platform driver <6>[ 19.226043] ohci-platform 4a064800.ohci: Generic Platform OHCI controller <6>[ 19.233856] ohci-platform 4a064800.ohci: new USB bus registered, assigned bus number 1 <6>[ 19.270965] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver <6>[ 19.277343] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 <3>[ 19.297149] omap4-keypad 4a31c000.keypad: number of keypad rows/columns not specified <4>[ 19.305786] omap4-keypad: probe of 4a31c000.keypad failed with error -22 <6>[ 19.306396] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 <6>[ 19.321716] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 19.329315] usb usb2: Product: MUSB HDRC host driver <6>[ 19.329711] usb usb2: Manufacturer: Linux 4.19.249-cip76 musb-hcd <6>[ 19.341064] usb usb2: SerialNumber: musb-hdrc.0.auto <6>[ 19.373565] emif 4c000000.emif: emif_probe: device configured with addr = (ptrval) and IRQ26 <6>[ 19.374603] ohci-platform 4a064800.ohci: irq 113, io mem 0x4a064800 <6>[ 19.404083] emif 4d000000.emif: emif_probe: device configured with addr = (ptrval) and IRQ27 <4>[ 19.453155] omapdss_dss 58000000.dss: 58000000.dss supply vdda_video not found, using dummy regulator <6>[ 19.463256] omapdss_dss 58000000.dss: Linked as a consumer to regulator.0 <6>[ 19.470642] DSS: OMAP DSS rev 4.0 <6>[ 19.504943] input: gpio_keys as /devices/platform/gpio_keys/input/input0 <6>[ 19.527465] hub 2-0:1.0: USB hub found <6>[ 19.542907] usb_phy_generic hsusb1_phy: Linked as a consumer to regulator.3 <6>[ 19.555297] hub 2-0:1.0: 1 port detected <6>[ 19.570434] ehci-omap 4a064c00.ehci: EHCI Host Controller <6>[ 19.570434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 <6>[ 19.585052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 19.592651] usb usb1: Product: Generic Platform OHCI controller <6>[ 19.598999] usb usb1: Manufacturer: Linux 4.19.249-cip76 ohci_hcd <6>[ 19.605377] usb usb1: SerialNumber: 4a064800.ohci <6>[ 19.613769] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops [omapdss]) <6>[ 19.614471] hub 1-0:1.0: USB hub found <3>[ 19.624053] OF: graph: no port node found in /ocp/dss@58000000/encoder@58005000 <6>[ 19.631927] hub 1-0:1.0: 3 ports detected <6>[ 19.635253] omapdss_dss 58000000.dss: bound 58005000.encoder (ops dsi_component_ops [omapdss]) <6>[ 19.665374] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm mapping ok <6>[ 19.677368] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 3 <6>[ 19.715393] ehci-omap 4a064c00.ehci: irq 114, io mem 0x4a064c00 <6>[ 19.753784] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 <6>[ 19.758117] omapdss_dss 58000000.dss: bound 58006000.encoder (ops hdmi4_component_ops [omapdss]) <6>[ 19.765655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 <6>[ 19.778320] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 19.778320] usb usb3: Product: EHCI Host Controller <6>[ 19.778320] usb usb3: Manufacturer: Linux 4.19.249-cip76 ehci_hcd <6>[ 19.778350] usb usb3: SerialNumber: 4a064c00.ehci <6>[ 19.787567] hub 3-0:1.0: USB hub found <6>[ 19.830841] hub 3-0:1.0: 3 ports detected <6>[ 19.961029] omap-hdmi-audio omap-hdmi-audio.1.auto: snd-soc-dummy-dai <-> 58006000.encoder mapping ok <6>[ 19.997161] dmm 4e000000.dmm: initialized all PAT entries <6>[ 20.007507] omapdss_dsi 58005000.encoder: Linked as a consumer to regulator.13 <6>[ 20.016204] omapdss_hdmi 58006000.encoder: Linked as a consumer to regulator.11 <6>[ 20.035186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 20.042388] [drm] No driver support for vblank timestamp query. <6>[ 20.090484] [drm] Cannot find any crtc or sizes <6>[ 20.113616] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 done Saving random seed: <6>[ 20.178863] usb 3-1: new high-speed USB device number 2 using ehci-omap <4>[ 20.194824] urandom_read_iter: 1 callbacks suppressed <5>[ 20.195068] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: <5>[ 20.406494] random: dropbear: uninitialized urandom read (32 bytes read) <6>[ 20.414764] usb 3-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 <6>[ 20.423645] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 OK <6>[ 20.437255] hub 3-1:1.0: USB hub found <6>[ 20.442718] hub 3-1:1.0: 5 ports detected /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh<6>[ 20.768646] usb 3-1.1: new high-speed USB device number 3 using ehci-omap / # . /lava-2133222/environment . /lava-2133222/environment / # /lava-2133222/bin/lava-test-runner /lava-2133222/0 <6>[ 20.921051] usb 3-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 <6>[ 20.930175] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 20.956542] smsc95xx v1.0.6 /lava-2133222/bin/lava-test-runner /lava-2133222/0 <6>[ 21.072265] smsc95xx 3-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 02:03:01:8c:13:b0 <6>[ 21.086029] usbcore: registered new interface driver smsc95xx <6>[ 21.123687] [drm] Cannot find any crtc or sizes + export 'TESTRUN_ID=0_dmesg' + cd /lava-2133222/0/tests/0_dmesg + cat uuid + UUID=2133222_1.5.2.4.1 + set<8>[ 21.177917] +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 21.256591] <8>[ 21.325714] <8>[ 21.405609] + set +x <8>[ 21.417144] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2133222/environment / # . /lava-2133222/environment/lava-2133222/bin/lava-test-runner /lava-2133222/1 / # /lava-2133222/bin/lava-test-runner /lava-2133222/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2133222/1/tests/1_bootrr + cat uuid + UUID=2133222_1.5.2.4.5 + <8>[ 21.997406] set +x + export 'PATH=/opt/bootrr/helpers:/lava-2133222/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2133222/1/../bin/lava-test-case <8>[ 23.109954] /lava-2133222/1/../bin/lava-test-case <8>[ 23.186218] /lava-2133222/1/../bin/lava-test-case <8>[ 23.226348] + set +x <8>[ 23.265655] / #