Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) Part number: VSM-DT6-302 Assembly: AS170013251 Date of production: 2017Aug20 Trying to boot from MMC1 MMC Boot Device: mmc0 (SD) U-Boot 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) CPU: Freescale i.MX6Q rev1.3 at 792MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 34C Reset cause: POR Board: Variscite DART-MX6 I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK auto-detected panel VAR-WVGA Display: VAR-WVGA (800x480) In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device eMMC: 7.3 GiB Net: using phy at 7 got MAC0 address from fuse: f8:dc:7a:10:9b:1e FEC [PRIME] Normal Boot Hit any key to stop autoboot: 10  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete..... done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.201.4.154 (260 ms) => setenv serverip 10.201.1.11 setenv serverip 10.201.1.11 => tftp 0x12000000 2198609/tftp-deploy-g7orins2/kernel/zImage tftp 0x12000000 2198609/tftp-deploy-g7orins2/kernel/zImage Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2198609/tftp-deploy-g7orins2/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 3.1 MiB/s done Bytes transferred = 8507304 (81cfa8 hex) => tftp 0x18100000 2198609/tftp-deploy-g7orins2/ramdisk/ramdisk.cpio.gz.uboot tftp 0x18100000 2198609/tftp-deploy-g7orins2/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2198609/tftp-deploy-g7orins2/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x18100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 3.2 MiB/s done Bytes transferred = 9253363 (8d31f3 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 2198609/tftp-deploy-g7orins2/dtb/imx6q-var-dt6customboard.dtb tftp 0x18000000 2198609/tftp-deploy-g7orins2/dtb/imx6q-var-dt6customboard.dtb Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2198609/tftp-deploy-g7orins2/dtb/imx6q-var-dt6customboard.dtb'. Load address: 0x18000000 Loading: *### 2.7 MiB/s done Bytes transferred = 40213 (9d15 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x18100000 0x18000000 bootz 0x12000000 0x18100000 0x18000000 ## Loading init Ramdisk from Legacy Image at 18100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9253299 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800cd14 switch to ldo_bypass mode! Starting kernel ... <6>[ 0.000000] Booting Linux on physical CPU 0x0 <5>[ 0.000000] Linux version 4.19.251-cip77 (KernelCI@build-j333439-arm-gcc-10-imx-v6-v7-defconfig-fbttl) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Jul 8 22:20:13 UTC 2022 <6>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache <6>[ 0.000000] OF: fdt: Machine model: Variscite DART-MX6 Carrier-board <4>[ 0.000000] Malformed early option 'earlycon' <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 939636K/1048576K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 43404K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <4>[ 0.000000] ccm: ldb_di0_sel already changed from reset value: 1 <4>[ 0.000000] ccm: ldb_di1_sel already changed from reset value: 1 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000040] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.001584] Console: colour dummy device 80x30 <4>[ 0.001627] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.001646] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.001665] ... MAX_LOCK_DEPTH: 48 <4>[ 0.001683] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.001700] ... CLASSHASH_SIZE: 4096 <4>[ 0.001716] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.001734] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.001750] ... CHAINHASH_SIZE: 32768 <4>[ 0.001768] memory used by lock dependency info: 4655 kB <4>[ 0.001784] per task-struct memory footprint: 1536 bytes <6>[ 0.001886] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.001914] pid_max: default: 32768 minimum: 301 <6>[ 0.002306] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.002347] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.004782] CPU: Testing write buffer coherency: ok <6>[ 0.004868] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.006353] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.008610] Setting up static identity map for 0x10100000 - 0x10100078 <6>[ 0.009189] rcu: Hierarchical SRCU implementation. <6>[ 0.011375] smp: Bringing up secondary CPUs ... <6>[ 0.013929] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.013942] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.016770] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.016782] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.019050] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.019061] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.019424] smp: Brought up 1 node, 4 CPUs <6>[ 0.019451] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.019473] CPU: All CPU(s) started in SVC mode. <6>[ 0.022857] devtmpfs: initialized <6>[ 0.049159] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.051930] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.052000] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.056209] pinctrl core: initialized pinctrl subsystem <6>[ 0.061826] NET: Registered protocol family 16 <6>[ 0.083178] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.086582] cpuidle: using governor menu <6>[ 0.086839] CPU identified as i.MX6Q, silicon rev 1.5 <6>[ 0.104035] vdd1p1: supplied by regulator-dummy <6>[ 0.105584] vdd3p0: supplied by regulator-dummy <6>[ 0.106772] vdd2p5: supplied by regulator-dummy <3>[ 0.107951] vddarm: bypassed regulator has no supply! <3>[ 0.107987] vddarm: failed to get the current voltage(-517) <3>[ 0.108038] anatop_regulator 20c8000.anatop:regulator-vddcore: failed to register vddarm <3>[ 0.109684] vddsoc: bypassed regulator has no supply! <3>[ 0.109709] vddsoc: failed to get the current voltage(-517) <3>[ 0.109758] anatop_regulator 20c8000.anatop:regulator-vddsoc: failed to register vddsoc <6>[ 0.132519] No ATAGs? <6>[ 0.132985] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.133098] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.135322] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.136298] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.197894] mxs-dma 110000.dma-apbh: initialized <6>[ 0.204494] vgaarb: loaded <5>[ 0.205537] SCSI subsystem initialized <6>[ 0.206828] usbcore: registered new interface driver usbfs <6>[ 0.207033] usbcore: registered new interface driver hub <6>[ 0.207161] usbcore: registered new device driver usb <6>[ 0.210401] i2c i2c-0: IMX I2C adapter registered <6>[ 0.210451] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.212342] i2c i2c-1: IMX I2C adapter registered <6>[ 0.212383] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.213890] i2c i2c-2: IMX I2C adapter registered <6>[ 0.213929] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.214240] media: Linux media interface: v0.10 <6>[ 0.214362] videodev: Linux video capture interface: v2.00 <6>[ 0.214802] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.214825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.214886] PTP clock support registered <6>[ 0.215684] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.219045] Bluetooth: Core ver 2.22 <6>[ 0.219162] NET: Registered protocol family 31 <6>[ 0.219185] Bluetooth: HCI device and connection manager initialized <6>[ 0.219300] Bluetooth: HCI socket layer initialized <6>[ 0.219337] Bluetooth: L2CAP socket layer initialized <6>[ 0.219610] Bluetooth: SCO socket layer initialized <6>[ 0.221694] clocksource: Switched to clocksource mxc_timer1 <5>[ 0.446184] VFS: Disk quotas dquot_6.6.0 <6>[ 0.446376] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.473796] NET: Registered protocol family 2 <6>[ 0.474593] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.477173] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.477313] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.477493] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.478615] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.479460] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.479669] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.480317] NET: Registered protocol family 1 <6>[ 0.482559] RPC: Registered named UNIX socket transport module. <6>[ 0.482636] RPC: Registered udp transport module. <6>[ 0.482661] RPC: Registered tcp transport module. <6>[ 0.482681] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.484858] Trying to unpack rootfs image as initramfs... <6>[ 1.458100] Freeing initrd memory: 9040K <4>[ 1.459610] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 1.460375] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 1.465313] Initialise system trusted keyrings <6>[ 1.466170] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.482073] NFS: Registering the id_resolver key type <5>[ 1.482250] Key type id_resolver registered <5>[ 1.482333] Key type id_legacy registered <6>[ 1.482508] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 1.484054] fuse init (API version 7.27) <5>[ 1.496376] Key type asymmetric registered <5>[ 1.496555] Asymmetric key parser 'x509' registered <6>[ 1.496815] bounce: pool size: 64 pages <6>[ 1.496947] io scheduler noop registered <6>[ 1.496971] io scheduler deadline registered <6>[ 1.497321] io scheduler cfq registered (default) <6>[ 1.497351] io scheduler mq-deadline registered <6>[ 1.497375] io scheduler kyber registered <4>[ 1.503542] pwm-backlight backlight: backlight supply power not found, using dummy regulator <6>[ 1.504174] pwm-backlight backlight: Linked as a consumer to regulator.0 <4>[ 1.515075] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 1.515349] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <4>[ 1.517893] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 1.518263] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 1.518402] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 1.522089] pfuze100-regulator 1-0008: Full layer: 2, Metal layer: 1 <6>[ 1.522966] pfuze100-regulator 1-0008: FAB: 0, FIN: 0 <6>[ 1.522994] pfuze100-regulator 1-0008: pfuze100 found. <6>[ 1.546067] VGEN6: Bringing 3300000uV into 2800000-2800000uV <6>[ 1.550477] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX <6>[ 2.558576] console [ttymxc0] enabled <6>[ 2.565894] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX <6>[ 2.575379] serial serial0: tty port ttymxc1 registered <6>[ 2.581576] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 71, base_baud = 5000000) is a IMX <6>[ 2.606686] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 2.615425] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 2.622503] [drm] No driver support for vblank timestamp query. <6>[ 2.630029] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) <6>[ 2.638056] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) <6>[ 2.646101] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) <6>[ 2.654096] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) <6>[ 2.662863] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 2.678433] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) <6>[ 2.686645] imx-drm display-subsystem: bound ldb (ops imx_ldb_ops) <6>[ 2.747038] Console: switching to colour frame buffer device 100x30 <6>[ 2.766191] imx-drm display-subsystem: fb0: DRM emulated frame buffer device <6>[ 2.777815] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 <6>[ 2.786145] imx-ipuv3 2800000.ipu: IPUv3H probed <6>[ 2.814746] brd: module loaded <6>[ 2.849149] loop: module loaded <6>[ 2.861868] spi_imx 2008000.ecspi: probed <6>[ 2.869125] CAN device driver interface <4>[ 2.873838] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found, using dummy regulator <6>[ 2.883608] flexcan 2090000.flexcan: Linked as a consumer to regulator.0 <6>[ 2.892394] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=32) <4>[ 2.903232] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 2.912943] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.922995] pps pps0: new PPS source ptp0 <6>[ 2.965170] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.973114] usbcore: registered new interface driver asix <6>[ 2.978883] usbcore: registered new interface driver ax88179_178a <6>[ 2.985399] usbcore: registered new interface driver cdc_ether <6>[ 2.991587] usbcore: registered new interface driver net1080 <6>[ 2.997656] usbcore: registered new interface driver cdc_subset <6>[ 3.003981] usbcore: registered new interface driver zaurus <6>[ 3.010009] usbcore: registered new interface driver cdc_ncm <6>[ 3.015994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.022837] ehci-pci: EHCI PCI platform driver <6>[ 3.027651] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 3.034104] usbcore: registered new interface driver usb-storage <6>[ 3.044142] imx_usb 2184000.usb: Linked as a consumer to regulator.10 <6>[ 3.060200] imx_usb 2184200.usb: Linked as a consumer to regulator.9 <6>[ 3.071117] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.076756] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.111767] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.121598] hub 1-0:1.0: USB hub found <6>[ 3.126093] hub 1-0:1.0: 1 port detected <6>[ 3.148002] input: generic ft5x06 (79) as /devices/soc0/soc/2100000.aips-bus/21a8000.i2c/i2c-2/2-0038/input/input0 <4>[ 3.168584] rtc-ds1307 2-0068: SET TIME! <6>[ 3.177150] rtc-ds1307 2-0068: registered as rtc0 <6>[ 3.185599] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 <6>[ 3.192375] i2c /dev entries driver <6>[ 3.205192] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 3.212144] Bluetooth: HCI UART driver ver 2.3 <6>[ 3.216873] Bluetooth: HCI UART protocol H4 registered <6>[ 3.222521] Bluetooth: HCI UART protocol LL registered <6>[ 3.229521] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.236048] sdhci: Copyright(c) Pierre Ossman <6>[ 3.240687] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.248965] sdhci-esdhc-imx 2190000.usdhc: Linked as a consumer to regulator.8 <4>[ 3.313593] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2 <3>[ 3.324172] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32.bts <3>[ 3.333758] Bluetooth: hci0: download firmware failed, retrying... <6>[ 3.375027] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA <4>[ 3.383744] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2 <6>[ 3.384732] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO <3>[ 3.394128] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32.bts <4>[ 3.404489] sdhci-esdhc-imx 2190000.usdhc: card claims to support voltages below defined range <3>[ 3.409061] Bluetooth: hci0: download firmware failed, retrying... <6>[ 3.445764] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA <6>[ 3.457511] mmc0: new high speed SDIO card at address 0001 <4>[ 3.473828] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2 <3>[ 3.484210] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32.bts <6>[ 3.490651] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <3>[ 3.493805] Bluetooth: hci0: download firmware failed, retrying... <6>[ 3.510213] caam 2100000.caam: Entropy delay = 3200 <4>[ 3.512809] mmc1: host does not support reading read-only switch, assuming write-enable <6>[ 3.515481] caam 2100000.caam: Instantiated RNG4 SH0 <6>[ 3.533952] mmc1: new high speed SDHC card at address aaaa <6>[ 3.543970] mmcblk1: mmc1:aaaa SL16G 14.8 GiB <6>[ 3.556836] mmc2: new DDR MMC card at address 0001 <6>[ 3.563145] mmcblk1: p1 p2 <6>[ 3.565757] mmcblk2: mmc2:0001 8GME4R 7.28 GiB <6>[ 3.573845] mmcblk2boot0: mmc2:0001 8GME4R partition 1 4.00 MiB <6>[ 3.576248] caam 2100000.caam: Instantiated RNG4 SH1 <6>[ 3.582608] mmcblk2boot1: mmc2:0001 8GME4R partition 2 4.00 MiB <6>[ 3.585357] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) <6>[ 3.593585] mmcblk2rpmb: mmc2:0001 8GME4R partition 3 512 KiB, chardev (244:0) <6>[ 3.598299] caam 2100000.caam: job rings = 2, qi = 0 <4>[ 3.611958] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2 <6>[ 3.615438] caam algorithms registered in /proc/crypto <3>[ 3.622405] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32.bts <3>[ 3.637336] Bluetooth: hci0: download firmware failed, retrying... <6>[ 3.645482] caam_jr 2101000.jr0: registering rng-caam <6>[ 3.651112] mmcblk2: p1 p2 <6>[ 3.652636] usbcore: registered new interface driver usbhid <6>[ 3.660034] usbhid: USB HID core driver <6>[ 3.670123] imx-media: subdev ipu1_vdic bound <6>[ 3.675166] imx-media: subdev ipu2_vdic bound <6>[ 3.680228] imx-media: subdev ipu1_ic_prp bound <6>[ 3.686490] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 <6>[ 3.694252] imx-media: subdev ipu1_ic_prpenc bound <6>[ 3.699893] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 <6>[ 3.707980] imx-media: subdev ipu1_ic_prpvf bound <6>[ 3.713176] imx-media: subdev ipu2_ic_prp bound <6>[ 3.718540] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 <6>[ 3.726002] imx-media: subdev ipu2_ic_prpenc bound <6>[ 3.731905] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 <6>[ 3.739113] imx-media: subdev ipu2_ic_prpvf bound <6>[ 3.745601] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 <6>[ 3.752171] imx-media: subdev ipu1_csi0 bound <6>[ 3.757464] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 <6>[ 3.764151] imx-media: subdev ipu1_csi1 bound <6>[ 3.769502] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 <6>[ 3.776047] imx-media: subdev ipu2_csi0 bound <6>[ 3.781325] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 <6>[ 3.787900] imx-media: subdev ipu2_csi1 bound <4>[ 3.802135] tlv320aic3x-codec 1-001b: Using deprecated property \"gpio-reset\", please update your DT <6>[ 3.811825] tlv320aic3x-codec 1-001b: Linked as a consumer to regulator.7 <4>[ 3.824997] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW <6>[ 3.839233] NET: Registered protocol family 10 <6>[ 3.847621] Segment Routing with IPv6 <6>[ 3.851894] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.859969] NET: Registered protocol family 17 <6>[ 3.864795] can: controller area network core (rev 20170425 abi 9) <6>[ 3.871449] NET: Registered protocol family 29 <6>[ 3.876266] can: raw protocol (rev 20170425) <6>[ 3.880963] can: broadcast manager protocol (rev 20170425 t) <6>[ 3.886987] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 3.893525] Key type dns_resolver registered <6>[ 3.899901] vddpu: supplied by SW1C <6>[ 3.904245] cpu cpu0: Linked as a consumer to regulator.5 <6>[ 3.910474] cpu cpu0: Dropping the link to regulator.5 <5>[ 3.916762] Registering SWP/SWPB emulation handler <5>[ 3.923455] Loading compiled-in X.509 certificates <3>[ 4.007924] vddarm: bypassed regulator has no supply! <3>[ 4.013479] vddarm: failed to get the current voltage(-517) <6>[ 4.019385] vddarm: supplied by SW1AB <3>[ 4.025591] vddsoc: bypassed regulator has no supply! <3>[ 4.030926] vddsoc: failed to get the current voltage(-517) <6>[ 4.036878] vddsoc: supplied by SW1C <6>[ 4.042584] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 4.052284] PU : no governor for states <6>[ 4.056503] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <6>[ 4.071207] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) <6>[ 4.077889] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) <6>[ 4.084412] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) <6>[ 4.090361] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 4.116070] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 4.140905] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 4.147356] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 4.156020] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 <6>[ 4.164615] imx-media: subdev ipu1_csi0_mux bound <6>[ 4.170419] imx-media: subdev ipu2_csi1_mux bound <6>[ 4.175659] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 <6>[ 4.180830] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 <6>[ 4.185878] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 <6>[ 4.191218] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 <6>[ 4.196425] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 <6>[ 4.201432] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 <6>[ 4.206636] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 <6>[ 4.211693] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 <6>[ 4.216855] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 <6>[ 4.221902] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 <6>[ 4.227246] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 <6>[ 4.232895] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 <6>[ 4.238406] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 <6>[ 4.244044] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 <6>[ 4.249555] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 <6>[ 4.254765] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 <6>[ 4.282599] asoc-simple-card sound: tlv320aic3x-hifi <-> 202c000.ssi mapping ok <6>[ 4.298912] cpu cpu0: Linked as a consumer to regulator.26 <6>[ 4.304992] cpu cpu0: Linked as a consumer to regulator.5 <6>[ 4.310971] cpu cpu0: Linked as a consumer to regulator.27 <6>[ 4.326107] imx_thermal tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 4.341228] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 <6>[ 4.351133] rtc-ds1307 2-0068: setting system clock to 2000-01-01 00:00:16 UTC (946684816) <6>[ 4.469102] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 4.487567] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 10.714258] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx <6>[ 10.741820] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 10.771808] Sending DHCP requests ., OK <6>[ 10.816127] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.4.154 <6>[ 10.824101] IP-Config: Complete: <6>[ 10.827613] device=eth0, hwaddr=f8:dc:7a:10:9b:1e, ipaddr=10.201.4.154, mask=255.255.0.0, gw=10.201.1.3 <6>[ 10.837764] host=10.201.4.154, domain=, nis-domain=(none) <6>[ 10.843937] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= <6>[ 10.843943] nameserver0=10.1.1.1 <5>[ 10.856640] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 10.913548] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <6>[ 10.921414] ALSA device list: <6>[ 10.924724] #0: dt6-customboard-audio <4>[ 10.929821] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.938944] cfg80211: failed to load regulatory.db <6>[ 10.948989] Freeing unused kernel memory: 1024K <6>[ 11.002604] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 11.328864] udevd[186]: starting version 3.2.9 <5>[ 11.337935] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 11.345691] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 11.352774] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 11.371477] udevd[186]: specified user 'tss' unknown <27>[ 11.377125] udevd[186]: specified group 'tss' unknown <30>[ 11.389234] udevd[187]: starting eudev-3.2.9 <4>[ 12.077260] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 <4>[ 12.088766] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 <4>[ 12.101832] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 <3>[ 12.112226] coda 2040000.vpu: firmware request failed <4>[ 12.735011] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2 <4>[ 12.748479] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2 <3>[ 12.764055] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 <4>[ 12.773338] wlcore: WARNING falling back to default config done Saving random seed: <5>[ 12.842218] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 13.083478] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh <6>[ 13.344699] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) <6>[ 13.376091] wlcore: loaded export SHELL=/bin/sh / # . /lava-2198609/environment . /lava-2198609/environment / # /lava-2198609/bin/lava-test-runner /lava-2198609/0 /lava-2198609/bin/lava-test-runner /lava-2198609/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2198609/0/tests/0_dmesg + cat uuid + UUID=2198609_1.5.2.4.1<8>[ 13.814134] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.898470] <8>[ 13.973850] <8>[ 14.061078] + set +x<8>[ 14.072799] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2198609/environment / # . /lava-2198609/environment/lava-2198609/bin/lava-test-runner /lava-2198609/1 / # /lava-2198609/bin/lava-test-runner /lava-2198609/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2198609/1/tests/1_bootrr + cat uuid + UUID=2198609_1.5.2.4.5 <8>[ 14.682817] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2198609/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2198609/1/../bin/lava-test-case <8>[ 15.786026] /lava-2198609/1/../bin/lava-test-case <8>[ 15.888488] /lava-2198609/1/../bin/lava-test-case <8>[ 15.932105] + set +x <8>[ 15.976310] / #