Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ser2net port 3006 device /dev/ttyimx7d-sdb-1 [115200 N81] (Debian GNU/Linux) U-Boot 2016.03-imx_v2016.03_4.1.15_2.0.0_ga+g0ec2a01 (Nov 11 2016 - 03:13:54 -0600) CPU: Freescale i.MX7D rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 25C Reset cause: POR Board: i.MX7D SABRESD RevA I2C: ready DRAM: 1 GiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Display: TFT43AB (480x272) Video: 480x272x24 In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device Net: FEC0 Normal Boot Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => setenv ipaddr 172.16.1.16; setenv serverip 172.16.1.4; setenv ethact FEC0; setenv ethprime FEC setenv ipaddr 172.16.1.16; setenv serverip 172.16.1.4; setenv ethact FEC0; setenv ethprime FEC => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp 0x80800000 1001320/tftp-deploy-12upurdx/kernel/zImage tftp 0x80800000 1001320/tftp-deploy-12upurdx/kernel/zImage Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1001320/tftp-deploy-12upurdx/kernel/zImage'. Load address: 0x80800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 1.4 MiB/s done Bytes transferred = 8507304 (81cfa8 hex) => tftp 0x86800000 1001320/tftp-deploy-12upurdx/ramdisk/ramdisk.cpio.gz.uboot tftp 0x86800000 1001320/tftp-deploy-12upurdx/ramdisk/ramdisk.cpio.gz.uboot Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1001320/tftp-deploy-12upurdx/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x86800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 10.4 MiB/s done Bytes transferred = 9259706 (8d4aba hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x83000000 1001320/tftp-deploy-12upurdx/dtb/imx7d-sdb.dtb tftp 0x83000000 1001320/tftp-deploy-12upurdx/dtb/imx7d-sdb.dtb Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1001320/tftp-deploy-12upurdx/dtb/imx7d-sdb.dtb'. Load address: 0x83000000 Loading: *### 4.6 MiB/s done Bytes transferred = 33699 (83a3 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' =>bootz 0x80800000 0x86800000 0x83000000 bootz 0x80800000 0x86800000 0x83000000 Kernel image @ 0x80800000 [ 0x000000 - 0x81cfa8 ] ## Loading init Ramdisk from Legacy Image at 86800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9259642 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300b3a2 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.251-cip77 (KernelCI@build-j333439-arm-gcc-10-imx-v6-v7-defconfig-fbttl) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Jul 8 22:20:13 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX7 SabreSD Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x30860000 (options '') [ 0.000000] bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 939800K/1048576K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 43240K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000009] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.008290] Switching to timer-based delay loop, resolution 125ns <6>[ 0.015212] Switching to timer-based delay loop, resolution 41ns <6>[ 0.020982] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.029118] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.040929] Console: colour dummy device 80x30 <4>[ 0.043727] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.051810] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.056148] ... MAX_LOCK_DEPTH: 48 <4>[ 0.060610] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.065277] ... CLASSHASH_SIZE: 4096 <4>[ 0.069885] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.074610] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.079364] ... CHAINHASH_SIZE: 32768 <4>[ 0.084060] memory used by lock dependency info: 4655 kB <4>[ 0.089777] per task-struct memory footprint: 1536 bytes <6>[ 0.095508] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.106147] pid_max: default: 32768 minimum: 301 <6>[ 0.111421] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.117973] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.127926] CPU: Testing write buffer coherency: ok <6>[ 0.131877] CPU0: update cpu_capacity 1024 <6>[ 0.134815] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.143152] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.148145] rcu: Hierarchical SRCU implementation. <6>[ 0.154433] smp: Bringing up secondary CPUs ... <6>[ 0.159963] smp: Brought up 1 node, 1 CPU <6>[ 0.161764] SMP: Total of 1 processors activated (48.00 BogoMIPS). <6>[ 0.168447] CPU: All CPU(s) started in SVC mode. <6>[ 0.176119] devtmpfs: initialized <6>[ 0.204846] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.210777] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.220267] futex hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.229382] pinctrl core: initialized pinctrl subsystem <6>[ 0.238143] NET: Registered protocol family 16 <6>[ 0.265198] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.273631] cpuidle: using governor menu <6>[ 0.276531] No ATAGs? <6>[ 0.276803] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.285946] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.305130] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver <4>[ 0.311690] imx7d-pinctrl 30330000.iomuxc: Failed to create dummy-iomuxc-gpr@30340000 debugfs directory <6>[ 0.320626] imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver <6>[ 0.329540] vdd1p0d: Bringing 0uV into 800000-800000uV <6>[ 0.332772] vdd1p0d: supplied by regulator-dummy <6>[ 0.338634] vdd1p2: supplied by regulator-dummy <6>[ 0.441561] mxs-dma 33000000.dma-apbh: initialized <6>[ 0.451764] vgaarb: loaded <5>[ 0.453088] SCSI subsystem initialized <6>[ 0.457419] usbcore: registered new interface driver usbfs <6>[ 0.461890] usbcore: registered new interface driver hub <6>[ 0.467546] usbcore: registered new device driver usb <4>[ 0.473052] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator <6>[ 0.482074] usb_phy_generic usbphynop1: Linked as a consumer to regulator.0 <4>[ 0.489213] usb_phy_generic usbphynop3: usbphynop3 supply vcc not found, using dummy regulator <6>[ 0.498072] usb_phy_generic usbphynop3: Linked as a consumer to regulator.0 <4>[ 0.505612] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator <6>[ 0.514230] usb_phy_generic usbphynop2: Linked as a consumer to regulator.0 <6>[ 0.524718] i2c i2c-0: IMX I2C adapter registered <6>[ 0.526880] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.534363] i2c i2c-1: IMX I2C adapter registered <6>[ 0.537464] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.544666] i2c i2c-2: IMX I2C adapter registered <6>[ 0.548051] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.555331] i2c i2c-3: IMX I2C adapter registered <6>[ 0.558637] i2c i2c-3: can't use DMA, using PIO instead. <6>[ 0.564756] media: Linux media interface: v0.10 <6>[ 0.569137] videodev: Linux video capture interface: v2.00 <6>[ 0.575346] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.580058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.589610] PTP clock support registered <6>[ 0.594601] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.603044] Bluetooth: Core ver 2.22 <6>[ 0.604144] NET: Registered protocol family 31 <6>[ 0.608770] Bluetooth: HCI device and connection manager initialized <6>[ 0.615573] Bluetooth: HCI socket layer initialized <6>[ 0.620608] Bluetooth: L2CAP socket layer initialized <6>[ 0.626189] Bluetooth: SCO socket layer initialized <6>[ 0.633345] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.909818] VFS: Disk quotas dquot_6.6.0 <6>[ 0.911329] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.946731] NET: Registered protocol family 2 <6>[ 0.949017] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.958249] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.963873] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.971085] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.978865] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.985277] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.990774] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.998055] NET: Registered protocol family 1 <6>[ 1.004009] RPC: Registered named UNIX socket transport module. <6>[ 1.008125] RPC: Registered udp transport module. <6>[ 1.013101] RPC: Registered tcp transport module. <6>[ 1.018161] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.027405] Trying to unpack rootfs image as initramfs... <6>[ 1.996980] Freeing initrd memory: 9044K <6>[ 2.000691] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 2.011640] Initialise system trusted keyrings <6>[ 2.014570] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 2.041226] NFS: Registering the id_resolver key type <5>[ 2.044026] Key type id_resolver registered <5>[ 2.048200] Key type id_legacy registered <6>[ 2.052624] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 2.060630] fuse init (API version 7.27) <5>[ 2.078842] Key type asymmetric registered <5>[ 2.080523] Asymmetric key parser 'x509' registered <6>[ 2.086102] bounce: pool size: 64 pages <6>[ 2.089757] io scheduler noop registered <6>[ 2.094179] io scheduler deadline registered <6>[ 2.099270] io scheduler cfq registered (default) <6>[ 2.103460] io scheduler mq-deadline registered <6>[ 2.108201] io scheduler kyber registered <4>[ 2.120162] pwm-backlight backlight: backlight supply power not found, using dummy regulator <6>[ 2.126737] pwm-backlight backlight: Linked as a consumer to regulator.0 <4>[ 2.145873] imx-sdma 30bd0000.sdma: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <6>[ 2.153169] imx-sdma 30bd0000.sdma: external firmware not found, using ROM firmware <4>[ 2.164050] imx7-pgc imx7-pgc-domain.1: DMA mask not set <6>[ 2.167192] imx7-pgc imx7-pgc-domain.1: Linked as a consumer to regulator.1 <6>[ 2.177336] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 <6>[ 2.181976] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 <6>[ 2.186579] pfuze100-regulator 0-0008: pfuze3000 found. <6>[ 2.218253] VLDO4: Bringing 3300000uV into 2800000-2800000uV <4>[ 2.223826] reset_imx7 30390000.src: Failed to create dummy-src@30390000 debugfC 0<6>[ 2.233938] console [ttymxc0] enabled <6>[ 2.233938] console [ttymxc0] enabled <6>[ 2.238974] bootconsole [ec_imx6q0] disabled <6>[ 2.238974] bootconsole [ec_imx6q0] disabled <6>[ 2.251369] 30a80000.serial: ttymxc5 at MMIO 0x30a80000 (irq = 57, base_baud = 15000000) is a IMX <6>[ 2.273006] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 2.280025] [drm] No driver support for vblank timestamp query. <3>[ 2.286752] mxsfb 30730000.lcdif: Failed to create outputs <6>[ 2.322930] brd: module loaded <6>[ 2.356864] loop: module loaded <3>[ 2.374470] spi_imx 30840000.ecspi: dma setup error -19, use pio <6>[ 2.382323] spi_imx 30840000.ecspi: probed <6>[ 2.390100] CAN device driver interface <6>[ 2.395229] flexcan 30a10000.can: Linked as a consumer to regulator.7 <6>[ 2.404051] flexcan 30a10000.can: device registered (reg_base=(ptrval), irq=52) <4>[ 2.416223] fec 30be0000.ethernet: 30be0000.ethernet supply phy not found, using dummy regulator <6>[ 2.425634] fec 30be0000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.436577] pps pps0: new PPS source ptp0 <6>[ 2.508936] fec 30be0000.ethernet eth0: registered PHC device 0 <4>[ 2.518295] fec 30bf0000.ethernet: 30bf0000.ethernet supply phy not found, using dummy regulator <6>[ 2.527849] fec 30bf0000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.535963] pps pps1: new PPS source ptp1 <3>[ 2.541791] fec 30bf0000.ethernet: Invalid MAC address: 00:00:00:00:00:00 <6>[ 2.549042] fec 30bf0000.ethernet: Using random MAC address: 92:4e:e9:ef:8f:69 <6>[ 3.469004] fec 30bf0000.ethernet eth1: registered PHC device 1 <6>[ 3.477709] usbcore: registered new interface driver asix <6>[ 3.483709] usbcore: registered new interface driver ax88179_178a <6>[ 3.490198] usbcore: registered new interface driver cdc_ether <6>[ 3.496631] usbcore: registered new interface driver net1080 <6>[ 3.502670] usbcore: registered new interface driver cdc_subset <6>[ 3.509123] usbcore: registered new interface driver zaurus <6>[ 3.515303] usbcore: registered new interface driver cdc_ncm <6>[ 3.521245] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.528107] ehci-pci: EHCI PCI platform driver <6>[ 3.532934] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 3.539417] usbcore: registered new interface driver usb-storage <6>[ 3.549899] imx_usb 30b10000.usb: Linked as a consumer to regulator.3 <6>[ 3.565640] imx_usb 30b20000.usb: Linked as a consumer to regulator.4 <6>[ 3.575619] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.581141] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.613403] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.624033] hub 1-0:1.0: USB hub found <6>[ 3.628345] hub 1-0:1.0: 1 port detected <6>[ 3.640061] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc/30000000.aips-bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 <4>[ 3.655756] ads7846 spi2.0: spi2.0 supply vcc not found, using dummy regulator <6>[ 3.665546] ads7846 spi2.0: Linked as a consumer to regulator.0 <6>[ 3.673609] ads7846 spi2.0: touchscreen, irq 135 <6>[ 3.680825] input: ADS7846 Touchscreen as /devices/platform/soc/30800000.aips-bus/30800000.spba-bus/30840000.ecspi/spi_master/spi2/spi2.0/input/input1 <6>[ 3.701476] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 <6>[ 3.708400] i2c /dev entries driver <6>[ 3.721616] imx2-wdt 30280000.wdog: timeout 60 sec (nowayout=0) <6>[ 3.728735] Bluetooth: HCI UART driver ver 2.3 <6>[ 3.733532] Bluetooth: HCI UART protocol H4 registered <6>[ 3.739412] Bluetooth: HCI UART protocol LL registered <6>[ 3.746171] cpu cpu0: Linked as a consumer to regulator.8 <6>[ 3.752353] cpu cpu0: Dropping the link to regulator.8 <6>[ 3.760530] cpu cpu0: Linked as a consumer to regulator.8 <6>[ 3.771996] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.778864] sdhci: Copyright(c) Pierre Ossman <6>[ 3.783579] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.792658] sdhci-esdhc-imx 30b40000.usdhc: Got CD GPIO <6>[ 3.800437] sdhci-esdhc-imx 30b40000.usdhc: Got WP GPIO <6>[ 3.842643] mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA <6>[ 3.854381] sdhci-esdhc-imx 30b50000.usdhc: Linked as a consumer to regulator.6 <6>[ 3.905200] mmc0: new high speed SDHC card at address e624 <6>[ 3.915809] mmcblk0: mmc0:e624 SA16G 14.8 GiB <6>[ 3.927358] mmcblk0: p1 p2 <6>[ 4.116148] mmc1: SDHCI controller on 30b50000.usdhc [30b50000.usdhc] using ADMA <4>[ 4.163500] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <6>[ 4.169339] mmc2: SDHCI controller on 30b60000.usdhc [30b60000.usdhc] using ADMA <4>[ 4.181917] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <6>[ 4.196356] caam 30900000.caam: Entropy delay = 3200 <6>[ 4.202937] caam 30900000.caam: Instantiated RNG4 SH0 <6>[ 4.262350] caam 30900000.caam: Instantiated RNG4 SH1 <6>[ 4.267719] caam 30900000.caam: device ID = 0x0a16030000000000 (Era 8) <6>[ 4.274558] caam 30900000.caam: job rings = 3, qi = 0 <4>[ 4.281501] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) <6>[ 4.309599] caam algorithms registered in /proc/crypto <6>[ 4.324732] caam_jr 30901000.jr0: registering rng-caam <6>[ 4.331307] caam 30900000.caam: caam pkc algorithms registered in /proc/crypto <6>[ 4.341176] usbcore: registered new interface driver usbhid <6>[ 4.347172] usbhid: USB HID core driver <6>[ 4.356204] imx7d_adc 30610000.adc: Linked as a consumer to regulator.5 <6>[ 4.365980] imx7d_adc 30620000.adc: Linked as a consumer to regulator.5 <6>[ 4.489783] mmc1: new ultra high speed SDR104 SDIO card at address 0001 <6>[ 4.500012] NET: Registered protocol family 10 <6>[ 4.511549] Segment Routing with IPv6 <6>[ 4.515938] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.524105] NET: Registered protocol family 17 <6>[ 4.528860] can: controller area network core (rev 20170425 abi 9) <6>[ 4.535676] NET: Registered protocol family 29 <6>[ 4.540420] can: raw protocol (rev 20170425) <6>[ 4.545239] can: broadcast manager protocol (rev 20170425 t) <6>[ 4.551200] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 4.557661] Key type dns_resolver registered <5>[ 4.562334] Registering SWP/SWPB emulation handler <5>[ 4.569023] Loading compiled-in X.509 certificates <6>[ 4.712972] imx6q-pcie 33800000.pcie: host bridge /soc/aips-bus@30800000/pcie@33800000 ranges: <6>[ 4.722130] imx6q-pcie 33800000.pcie: IO 0x4ff80000..0x4ff8ffff -> 0x00000000 <6>[ 4.730075] imx6q-pcie 33800000.pcie: MEM 0x40000000..0x4fefffff -> 0x40000000 <3>[ 5.853609] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 5.863653] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 <6>[ 5.870310] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 5.876162] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 5.882632] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fefffff] <6>[ 5.894604] PCI: bus0: Fast back to back transfers disabled <6>[ 5.903355] PCI: bus1: Fast back to back transfers enabled <6>[ 5.909183] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x400fffff 64bit] <6>[ 5.916858] pci 0000:00:00.0: BAR 6: assigned [mem 0x40100000-0x4010ffff pref] <6>[ 5.924427] pci 0000:00:00.0: PCI bridge to [bus 01-ff] <6>[ 5.931995] panel-simple panel: Linked as a consumer to regulator.21 <6>[ 5.941469] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 5.948454] [drm] No driver support for vblank timestamp query. <6>[ 5.970507] Console: switching to colour frame buffer device 60x34 <6>[ 5.978647] mxsfb 30730000.lcdif: fb0: DRM emulated frame buffer device <6>[ 5.989253] [drm] Initialized mxsfb-drm 1.0.0 20160824 for 30730000.lcdif on minor 0 <6>[ 6.001034] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C <6>[ 6.015052] input: gpio-keys as /devices/platform/gpio-keys/input/input2 <6>[ 6.022975] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:02 UTC (2) <6>[ 6.043785] Generic PHY 30be0000.ethernet-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) <6>[ 6.058221] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 6.072692] Generic PHY 30be0000.ethernet-1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=30be0000.ethernet-1:01, irq=POLL) <6>[ 6.086059] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready <6>[ 10.194988] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 10.223510] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 10.255072] Sending DHCP requests .., OK <6>[ 14.777640] IP-Config: Got DHCP answer from 172.16.1.4, my address is 172.16.1.219 <6>[ 14.785596] IP-Config: Complete: <6>[ 14.789110] device=eth0, hwaddr=00:04:9f:05:b2:60, ipaddr=172.16.1.219, mask=255.255.255.0, gw=172.16.1.4 <6>[ 14.799450] host=172.16.1.219, domain=example.org, nis-domain=(none) <6>[ 14.806570] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 14.806577] nameserver0=172.16.1.4 <5>[ 14.830878] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 14.887913] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <6>[ 14.899129] ALSA device list: <6>[ 14.902377] No soundcards found. <4>[ 14.907043] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 14.916289] cfg80211: failed to load regulatory.db <6>[ 14.925404] Freeing unused kernel memory: 1024K <6>[ 14.953920] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 15.285714] udevd[195]: starting version 3.2.9 <5>[ 15.292560] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 15.301169] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 15.308243] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 15.327208] udevd[195]: specified user 'tss' unknown <27>[ 15.332734] udevd[195]: specified group 'tss' unknown <30>[ 15.356006] udevd[196]: starting eudev-3.2.9 <6>[ 16.749599] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 16.817311] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 done Saving random seed: <5>[ 17.304866] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 17.485062] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh exp<3>[ 17.905619] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 ort SHELL=/bin/sh / # . /lava-1001320/environment . /lava-1001320/environment / # /lava-1001320/bin/lava-test-runner /lava-1001320/0 /lava-1001320/bin/lava-test-runner /lava-1001320/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1001320/0/tests/0_dmesg + cat uuid + UUID=1001320_1.5.2.4.1<8>[ 23.406163] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 23.490781] <8>[ 23.566401] <8>[ 23.641876] + set +x <8>[ 23.653063] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1001320/environment / # . /lava-1001320/environment/lava-1001320/bin/lava-test-runner /lava-1001320/1 / # /lava-1001320/bin/lava-test-runner /lava-1001320/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1001320/1/tests/1_bootrr + cat uuid + UUID=1001320_1.5.2.4.5<8>[ 29.445518] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-1001320/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-1001320/1/../bin/lava-test-case <8>[ 30.532332] /lava-1001320/1/../bin/lava-test-case <8>[ 31.618070] /lava-1001320/1/../bin/lava-test-case <8>[ 31.659730] + set +x <8>[ 31.689925] / #