connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/768246/tftp-deploy-uf529qmt/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/768246/tftp-deploy-uf529qmt/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/768246/tftp-deploy-uf529qmt/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/768246/tftp-deploy-uf529qmt/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/768246/tftp-deploy-uf529qmt/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/768246/tftp-deploy-uf529qmt/kernel/zImage warning: No MAC address set. Using random address b2:42:e8:15:fa:82 eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.150 Loading ARM Linux zImage '/mnt/tftp/768246/tftp-deploy-uf529qmt/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82891000 no initrd load address, defaulting to 0x831ae000 Loaded initrd GZIP compressed '/mnt/tftp/768246/tftp-deploy-uf529qmt/ramdisk/ramdisk.cpio.gz' initrd is at 0x831ae000-0x83a8217c Loading devicetree from '/mnt/tftp/768246/tftp-deploy-uf529qmt/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 Starting kernel at 0x82891000, initrd at 0x831ae000, oftree at 0x83a83000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.251-cip77 (KernelCI@build-j333439-arm-gcc-10-imx-v6-v7-defconfig-fbttl) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Jul 8 22:20:13 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Technexion Pico i.MX6UL Board [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x9a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 419040K/524288K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 39712K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000020] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000088] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.003673] Console: colour dummy device 80x30 [ 0.003777] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003829] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003873] ... MAX_LOCK_DEPTH: 48 [ 0.003917] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003961] ... CLASSHASH_SIZE: 4096 [ 0.004003] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.004046] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.004088] ... CHAINHASH_SIZE: 32768 [ 0.004131] memory used by lock dependency info: 4655 kB [ 0.004175] per task-struct memory footprint: 1536 bytes [ 0.004393] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.004469] pid_max: default: 32768 minimum: 301 [ 0.005374] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.005453] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.013053] CPU: Testing write buffer coherency: ok [ 0.016420] /cpus/cpu@0 missing clock-frequency property [ 0.016505] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.022340] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.023854] rcu: Hierarchical SRCU implementation. [ 0.027684] smp: Bringing up secondary CPUs ... [ 0.027758] smp: Brought up 1 node, 1 CPU [ 0.027816] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.027865] CPU: All CPU(s) started in SVC mode. [ 0.033475] devtmpfs: initialized [ 0.079155] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.080822] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.080987] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.086818] pinctrl core: initialized pinctrl subsystem [ 0.100002] NET: Registered protocol family 16 [ 0.158609] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.166958] cpuidle: using governor menu [ 0.202842] vdd3p0: supplied by regulator-dummy [ 0.206092] cpu: supplied by regulator-dummy [ 0.209602] vddsoc: supplied by regulator-dummy [ 0.261714] No ATAGs? [ 0.262314] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.262552] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.270826] imx6ul-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e4000 debugfs directory [ 0.273153] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.416248] mxs-dma 1804000.dma-apbh: initialized [ 0.435133] vgaarb: loaded [ 0.438070] SCSI subsystem initialized [ 0.441542] usbcore: registered new interface driver usbfs [ 0.442088] usbcore: registered new interface driver hub [ 0.442401] usbcore: registered new device driver usb [ 0.451196] i2c i2c-0: IMX I2C adapter registered [ 0.451314] i2c i2c-0: can't use DMA, using PIO instead. [ 0.455416] i2c i2c-1: IMX I2C adapter registered [ 0.455530] i2c i2c-1: can't use DMA, using PIO instead. [ 0.458529] i2c i2c-2: IMX I2C adapter registered [ 0.458641] i2c i2c-2: can't use DMA, using PIO instead. [ 0.459407] media: Linux media interface: v0.10 [ 0.459719] videodev: Linux video capture interface: v2.00 [ 0.460904] pps_core: LinuxPPS API ver. 1 registered [ 0.460968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.461129] PTP clock support registered [ 0.463249] Advanced Linux Sound Architecture Driver Initialized. [ 0.470981] Bluetooth: Core ver 2.22 [ 0.471304] NET: Registered protocol family 31 [ 0.471364] Bluetooth: HCI device and connection manager initialized [ 0.471651] Bluetooth: HCI socket layer initialized [ 0.471748] Bluetooth: L2CAP socket layer initialized [ 0.472266] Bluetooth: SCO socket layer initialized [ 0.477815] clocksource: Switched to clocksource mxc_timer1 [ 1.069958] VFS: Disk quotas dquot_6.6.0 [ 1.070364] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.143063] NET: Registered protocol family 2 [ 1.144213] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 1.149516] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) [ 1.149718] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.149952] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 1.151005] TCP: Hash tables configured (established 4096 bind 4096) [ 1.152081] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.152333] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.153462] NET: Registered protocol family 1 [ 1.159257] RPC: Registered named UNIX socket transport module. [ 1.159457] RPC: Registered udp transport module. [ 1.159512] RPC: Registered tcp transport module. [ 1.159564] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.165390] Trying to unpack rootfs image as initramfs... [ 3.450206] Freeing initrd memory: 9044K [ 3.461003] Initialise system trusted keyrings [ 3.463050] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.508571] NFS: Registering the id_resolver key type [ 3.509077] Key type id_resolver registered [ 3.509273] Key type id_legacy registered [ 3.509750] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 3.513837] fuse init (API version 7.27) [ 3.554379] Key type asymmetric registered [ 3.554742] Asymmetric key parser 'x509' registered [ 3.555161] io scheduler noop registered [ 3.555234] io scheduler deadline registered [ 3.556099] io scheduler cfq registered (default) [ 3.556169] io scheduler mq-deadline registered [ 3.556230] io scheduler kyber registered [ 3.574899] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 3.576076] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 3.606078] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.606740] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.616832] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 3.618711] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 3.618786] pfuze100-regulator 0-0008: pfuze3000 found. [ 3.662836] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX [ 3.670400] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 61, base_baud = 5000000) is a IMX [ 4.490442] console [ttymxc5] enabled [ 4.521050] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.528005] [drm] No driver support for vblank timestamp query. [ 4.534833] OF: graph: no port node found in /soc/aips-bus@2100000/lcdif@21c8000 [ 4.542504] mxsfb 21c8000.lcdif: Failed to create outputs [ 4.622619] brd: module loaded [ 4.691997] loop: module loaded [ 4.717812] CAN device driver interface [ 4.722666] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found, using dummy regulator [ 4.732718] flexcan 2090000.flexcan: Linked as a consumer to regulator.0 [ 4.744048] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=22) [ 4.752762] flexcan 2094000.flexcan: 2094000.flexcan supply xceiver not found, using dummy regulator [ 4.762872] flexcan 2094000.flexcan: Linked as a consumer to regulator.0 [ 4.773455] flexcan 2094000.flexcan: device registered (reg_base=(ptrval), irq=23) [ 4.786360] fec 20b4000.ethernet: 20b4000.ethernet supply phy not found, using dummy regulator [ 4.795914] fec 20b4000.ethernet: Linked as a consumer to regulator.0 [ 4.808238] pps pps0: new PPS source ptp0 [ 4.893344] fec 20b4000.ethernet eth0: registered PHC device 0 [ 4.903698] usbcore: registered new interface driver asix [ 4.909972] usbcore: registered new interface driver ax88179_178a [ 4.916364] usbcore: registered new interface driver cdc_ether [ 4.923088] usbcore: registered new interface driver net1080 [ 4.929476] usbcore: registered new interface driver cdc_subset [ 4.935686] usbcore: registered new interface driver zaurus [ 4.942197] usbcore: registered new interface driver cdc_ncm [ 4.948091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.954678] ehci-pci: EHCI PCI platform driver [ 4.959578] ehci-mxc: Freescale On-Chip EHCI Host driver [ 4.966808] usbcore: registered new interface driver usb-storage [ 4.981638] imx_usb 2184000.usb: Linked as a consumer to regulator.7 [ 5.004704] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 5.014059] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 5.025381] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 5.031483] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 5.067594] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 5.084629] hub 1-0:1.0: USB hub found [ 5.089607] hub 1-0:1.0: 1 port detected [ 5.110826] input: 20cc000.snvs:snvs-powerkey as /devices/soc0/soc/2000000.aips-bus/20cc000.snvs/20cc000.snvs:snvs-powerkey/input/input0 [ 5.146759] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 5.154154] i2c /dev entries driver [ 5.179289] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 5.186844] Bluetooth: HCI UART driver ver 2.3 [ 5.191584] Bluetooth: HCI UART protocol H4 registered [ 5.198219] Bluetooth: HCI UART protocol LL registered [ 5.206755] sdhci: Secure Digital Host Controller Interface driver [ 5.213217] sdhci: Copyright(c) Pierre Ossman [ 5.217775] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.269053] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 5.283709] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 5.349822] mmc0: new DDR MMC card at address 0001 [ 5.364219] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 5.372225] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 5.381320] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 5.389919] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (244:0) [ 5.408434] mmcblk0: p1 p2 [ 5.550718] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 5.583446] caam 2140000.caam: Entropy delay = 3200 [ 5.588967] caam 2140000.caam: Instantiated RNG4 SH0 [ 5.649724] caam 2140000.caam: Instantiated RNG4 SH1 [ 5.654773] caam 2140000.caam: device ID = 0x0a16030000000000 (Era 8) [ 5.661413] caam 2140000.caam: job rings = 3, qi = 0 [ 5.672911] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 5.686607] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.699598] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.715264] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.772494] caam algorithms registered in /proc/crypto [ 5.798090] caam_jr 2141000.jr0: registering rng-caam [ 5.805995] caam 2140000.caam: caam pkc algorithms registered in /proc/crypto [ 5.819447] usbcore: registered new interface driver usbhid [ 5.825211] usbhid: USB HID core driver [ 5.870001] sgtl5000 1-000a: Linked as a consumer to regulator.4 [ 5.877965] sgtl5000 1-000a: Linked as a consumer to regulator.5 [ 5.891982] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.907994] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.002362] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 6.012356] mmc1: new high speed SDIO card at address 0001 [ 6.033631] imx-sgtl5000 sound: mux-int-port missing or invalid [ 6.039918] imx-sgtl5000: probe of sound failed with error -22 [ 6.052408] NET: Registered protocol family 10 [ 6.066201] Segment Routing with IPv6 [ 6.071305] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.082284] NET: Registered protocol family 17 [ 6.086888] can: controller area network core (rev 20170425 abi 9) [ 6.094094] NET: Registered protocol family 29 [ 6.099166] can: raw protocol (rev 20170425) [ 6.103863] can: broadcast manager protocol (rev 20170425 t) [ 6.109872] can: netlink gateway (rev 20170425) max_hops=1 [ 6.117545] Key type dns_resolver registered [ 6.125852] cpu cpu0: Linked as a consumer to regulator.2 [ 6.132302] cpu cpu0: Linked as a consumer to regulator.3 [ 6.152729] Registering SWP/SWPB emulation handler [ 6.161182] Loading compiled-in X.509 certificates [ 6.326046] imx_thermal tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 6.376383] fsl-asoc-card sound: sgtl5000 <-> 2028000.sai mapping ok [ 6.411975] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 6.422126] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.528784] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.537616] ALSA device list: [ 6.540647] #0: sgtl5000-audio [ 6.545439] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.562631] Freeing unused kernel memory: 1024K [ 6.568488] cfg80211: failed to load regulatory.db [ 6.590054] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 7.295570] udevd[150]: starting version 3.2.9 [ 7.306289] random: udevd: uninitialized urandom read (16 bytes read) [ 7.316311] random: udevd: uninitialized urandom read (16 bytes read) [ 7.323825] random: udevd: uninitialized urandom read (16 bytes read) [ 7.358993] udevd[150]: specified user 'tss' unknown [ 7.364573] udevd[150]: specified group 'tss' unknown [ 7.386596] udevd[151]: starting eudev-3.2.9 [ 10.669528] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 10.765131] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 done Saving random seed: [ 12.028371] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 12.058912] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 12.486740] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-768246/environment . /lava-768246/environment / # /lava-768246/bin/lava-test-runner /lava-768246/0 /lava-768246/bin/lava-test-runner /lava-768246/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-768246/0/tests/0_dmesg + cat uuid + UUID=768246_1.5.2.3.1[ 13.384985] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 13.559987] [ 13.715207] [ 13.870125] + set +x [ 13.883610] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-768246/environment / # . /lava-768246/environment/lava-768246/bin/lava-test-runner /lava-768246/1 / # /lava-768246/bin/lava-test-runner /lava-768246/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-768246/1/tests/1_bootrr + cat uuid + UUID=768246_1.5.2.3.5[ 14.585500] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-768246/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-768246/1/../bin/lava-test-case [ 15.776131] /lava-768246/1/../bin/lava-test-case [ 15.924710] /lava-768246/1/../bin/lava-test-case [ 16.046449] + set +x [ 16.110716] / #