connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/799963/tftp-deploy-w79j80l7/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/799963/tftp-deploy-w79j80l7/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/799963/tftp-deploy-w79j80l7/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/799963/tftp-deploy-w79j80l7/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/799963/tftp-deploy-w79j80l7/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/799963/tftp-deploy-w79j80l7/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address da:60:66:12:fe:ad T eth0: DHCP client bound to address 10.8.254.132 Loading ARM Linux zImage '/mnt/tftp/799963/tftp-deploy-w79j80l7/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12892000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/799963/tftp-deploy-w79j80l7/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d3fc9 Loading devicetree from '/mnt/tftp/799963/tftp-deploy-w79j80l7/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12892000, initrd at 0x18000000, oftree at 0x188d4000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.255-cip79 (KernelCI@build-j71181-arm-gcc-10-imx-v6-v7-defconfig-8d4jl) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Tue Aug 23 04:45:20 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978984K/2097152K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 52632K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000037] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001591] Console: colour dummy device 80x30 [ 0.001630] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001649] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001666] ... MAX_LOCK_DEPTH: 48 [ 0.001682] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001698] ... CLASSHASH_SIZE: 4096 [ 0.001714] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001729] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001745] ... CHAINHASH_SIZE: 32768 [ 0.001762] memory used by lock dependency info: 4655 kB [ 0.001777] per task-struct memory footprint: 1536 bytes [ 0.001873] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001901] pid_max: default: 32768 minimum: 301 [ 0.002288] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002326] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005134] CPU: Testing write buffer coherency: ok [ 0.005221] CPU0: Spectre v2: using BPIALL workaround [ 0.006617] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008843] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009405] rcu: Hierarchical SRCU implementation. [ 0.011496] smp: Bringing up secondary CPUs ... [ 0.013924] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013937] CPU1: Spectre v2: using BPIALL workaround [ 0.016640] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.016652] CPU2: Spectre v2: using BPIALL workaround [ 0.018814] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.018825] CPU3: Spectre v2: using BPIALL workaround [ 0.019177] smp: Brought up 1 node, 4 CPUs [ 0.019204] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.019224] CPU: All CPU(s) started in SVC mode. [ 0.021952] devtmpfs: initialized [ 0.046370] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.048793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.048858] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.052962] pinctrl core: initialized pinctrl subsystem [ 0.058304] NET: Registered protocol family 16 [ 0.076921] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.080223] cpuidle: using governor menu [ 0.080437] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.096080] vdd1p1: supplied by regulator-dummy [ 0.097562] vdd3p0: supplied by regulator-dummy [ 0.098793] vdd2p5: supplied by regulator-dummy [ 0.100035] vddarm: supplied by regulator-dummy [ 0.101699] vddpu: supplied by regulator-dummy [ 0.102538] vddsoc: supplied by regulator-dummy [ 0.127875] No ATAGs? [ 0.128326] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.128432] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.130808] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.131666] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.191835] mxs-dma 110000.dma-apbh: initialized [ 0.194599] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.194633] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.194661] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.194683] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.194756] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.197651] vgaarb: loaded [ 0.198653] SCSI subsystem initialized [ 0.200014] usbcore: registered new interface driver usbfs [ 0.200223] usbcore: registered new interface driver hub [ 0.200349] usbcore: registered new device driver usb [ 0.203276] i2c i2c-0: IMX I2C adapter registered [ 0.203321] i2c i2c-0: can't use DMA, using PIO instead. [ 0.204903] i2c i2c-1: IMX I2C adapter registered [ 0.204943] i2c i2c-1: can't use DMA, using PIO instead. [ 0.206207] i2c i2c-2: IMX I2C adapter registered [ 0.206247] i2c i2c-2: can't use DMA, using PIO instead. [ 0.206584] media: Linux media interface: v0.10 [ 0.206692] videodev: Linux video capture interface: v2.00 [ 0.207122] pps_core: LinuxPPS API ver. 1 registered [ 0.207147] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.207203] PTP clock support registered [ 0.207970] Advanced Linux Sound Architecture Driver Initialized. [ 0.211407] Bluetooth: Core ver 2.22 [ 0.211528] NET: Registered protocol family 31 [ 0.211550] Bluetooth: HCI device and connection manager initialized [ 0.211664] Bluetooth: HCI socket layer initialized [ 0.211700] Bluetooth: L2CAP socket layer initialized [ 0.211893] Bluetooth: SCO socket layer initialized [ 0.213913] clocksource: Switched to clocksource mxc_timer1 [ 0.430701] VFS: Disk quotas dquot_6.6.0 [ 0.430863] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.458028] NET: Registered protocol family 2 [ 0.458618] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.461044] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.461171] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.461331] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.462351] TCP: Hash tables configured (established 8192 bind 8192) [ 0.463039] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.463226] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.463950] NET: Registered protocol family 1 [ 0.465914] RPC: Registered named UNIX socket transport module. [ 0.465987] RPC: Registered udp transport module. [ 0.466010] RPC: Registered tcp transport module. [ 0.466031] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.468207] Trying to unpack rootfs image as initramfs... [ 1.416369] Freeing initrd memory: 9040K [ 1.417315] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.418048] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.422699] Initialise system trusted keyrings [ 1.423469] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.439523] NFS: Registering the id_resolver key type [ 1.439677] Key type id_resolver registered [ 1.439759] Key type id_legacy registered [ 1.439940] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.441358] fuse init (API version 7.27) [ 1.454163] Key type asymmetric registered [ 1.454334] Asymmetric key parser 'x509' registered [ 1.454611] bounce: pool size: 64 pages [ 1.454734] io scheduler noop registered [ 1.454758] io scheduler deadline registered [ 1.455064] io scheduler cfq registered (default) [ 1.455090] io scheduler mq-deadline registered [ 1.455113] io scheduler kyber registered [ 1.469587] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.469857] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.472394] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.472878] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.473099] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.473556] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.474147] PU : no governor for states [ 1.474209] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.477743] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.478622] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.478650] pfuze100-regulator 2-0008: pfuze100 found. [ 1.505101] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.470742] console [ttymxc0] enabled [ 2.477501] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.501641] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.508020] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.514239] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.519928] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.529349] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.537471] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.543592] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.552526] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.562581] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.569403] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.576186] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.583451] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.590265] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.597057] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.604699] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.613255] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.618277] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.627190] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.633945] [drm] No driver support for vblank timestamp query. [ 2.641352] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.649122] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.656958] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.664739] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.673227] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.688283] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.696745] [drm] Cannot find any crtc or sizes [ 2.704399] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.712366] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.740016] brd: module loaded [ 2.771943] loop: module loaded [ 2.777264] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.785265] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.793292] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.801539] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.812618] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.819726] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.828590] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.841069] scsi host0: ahci-imx [ 2.845931] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.862594] CAN device driver interface [ 2.869130] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.879173] pps pps0: new PPS source ptp0 [ 2.923025] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.930744] usbcore: registered new interface driver asix [ 2.936321] usbcore: registered new interface driver ax88179_178a [ 2.942513] usbcore: registered new interface driver cdc_ether [ 2.948492] usbcore: registered new interface driver net1080 [ 2.954305] usbcore: registered new interface driver cdc_subset [ 2.960317] usbcore: registered new interface driver zaurus [ 2.966104] usbcore: registered new interface driver cdc_ncm [ 2.971783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.978369] ehci-pci: EHCI PCI platform driver [ 2.982922] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.989142] usbcore: registered new interface driver usb-storage [ 2.999109] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.007602] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 3.017755] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.023272] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.053918] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.063485] hub 1-0:1.0: USB hub found [ 3.067613] hub 1-0:1.0: 1 port detected [ 3.083408] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.089958] i2c /dev entries driver [ 3.103283] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.110009] Bluetooth: HCI UART driver ver 2.3 [ 3.114572] Bluetooth: HCI UART protocol H4 registered [ 3.119893] Bluetooth: HCI UART protocol LL registered [ 3.126654] sdhci: Secure Digital Host Controller Interface driver [ 3.132852] sdhci: Copyright(c) Pierre Ossman [ 3.137284] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.144341] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.186013] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.186250] ata1: SATA link down (SStatus 0 SControl 300) [ 3.198930] ahci-imx 2200000.sata: no device found, disabling link. [ 3.205277] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.228629] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.238376] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.246821] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.253561] mmc0: new high speed SDHC card at address 1234 [ 3.265798] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.286912] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.301566] caam 2100000.caam: Entropy delay = 3200 [ 3.306628] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.353940] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.367391] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.372559] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.379072] caam 2100000.caam: job rings = 2, qi = 0 [ 3.404906] caam algorithms registered in /proc/crypto [ 3.418059] caam_jr 2101000.jr0: registering rng-caam [ 3.425254] usbcore: registered new interface driver usbhid [ 3.431002] usbhid: USB HID core driver [ 3.441834] imx-media: subdev ipu1_vdic bound [ 3.446795] imx-media: subdev ipu2_vdic bound [ 3.452900] imx-media: subdev ipu1_ic_prp bound [ 3.459406] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.466866] imx-media: subdev ipu1_ic_prpenc bound [ 3.472392] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.479454] imx-media: subdev ipu1_ic_prpvf bound [ 3.484424] imx-media: subdev ipu2_ic_prp bound [ 3.489571] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.496801] imx-media: subdev ipu2_ic_prpenc bound [ 3.502226] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.509463] imx-media: subdev ipu2_ic_prpvf bound [ 3.515782] mmc2: new DDR MMC card at address 0001 [ 3.516233] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.522965] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.526891] imx-media: subdev ipu1_csi0 bound [ 3.532986] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.536823] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.543362] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.548075] imx-media: subdev ipu1_csi1 bound [ 3.555135] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.559142] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.572218] imx-media: subdev ipu2_csi0 bound [ 3.572545] mmcblk2: p1 p2 [ 3.577819] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.586018] imx-media: subdev ipu2_csi1 bound [ 3.599936] hub 1-1:1.0: USB hub found [ 3.604839] hub 1-1:1.0: 4 ports detected [ 3.606679] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.615191] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.623165] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.633666] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.679398] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.689471] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.754475] [drm] Cannot find any crtc or sizes [ 4.090964] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.114711] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.126333] NET: Registered protocol family 10 [ 4.134473] Segment Routing with IPv6 [ 4.138382] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.146317] NET: Registered protocol family 17 [ 4.150814] can: controller area network core (rev 20170425 abi 9) [ 4.157276] NET: Registered protocol family 29 [ 4.161750] can: raw protocol (rev 20170425) [ 4.166221] can: broadcast manager protocol (rev 20170425 t) [ 4.171925] can: netlink gateway (rev 20170425) max_hops=1 [ 4.178139] Key type dns_resolver registered [ 4.184427] cpu cpu0: Linked as a consumer to regulator.4 [ 4.190138] cpu cpu0: Linked as a consumer to regulator.5 [ 4.195839] cpu cpu0: Linked as a consumer to regulator.6 [ 4.206186] Registering SWP/SWPB emulation handler [ 4.214842] Loading compiled-in X.509 certificates [ 4.285564] imx-media: subdev ipu1_csi0_mux bound [ 4.291065] imx-media: subdev ipu2_csi1_mux bound [ 4.296039] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.300942] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.305726] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.310800] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.315741] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.320480] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.325417] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.330156] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.335097] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.339832] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.344949] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.350281] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.355566] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.360896] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.366179] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.371074] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.387244] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.403522] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.412994] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.466264] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.473717] ALSA device list: [ 4.476746] #0: imx6-wandboard-sgtl5000 [ 4.480769] #1: imx-spdif [ 4.484387] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Ui��[W���[ 4.496151] Freeing unused kernel memory: 1024K [ 4.535111] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.815289] udevd[183]: starting version 3.2.9 [ 4.822140] random: udevd: uninitialized urandom read (16 bytes read) [ 4.829313] random: udevd: uninitialized urandom read (16 bytes read) [ 4.836252] random: udevd: uninitialized urandom read (16 bytes read) [ 4.852509] udevd[183]: specified user 'tss' unknown [ 4.857716] udevd[183]: specified group 'tss' unknown [ 4.868294] udevd[184]: starting eudev-3.2.9 [ 5.452546] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.463497] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.473679] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.484547] coda 2040000.vpu: firmware request failed done Saving random seed: [ 5.854364] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.064406] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-799963/environment . /lava-799963/environment / # /lava-799963/bin/lava-test-runner /lava-799963/0 /lava-799963/bin/lava-test-runner /lava-799963/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-799963/0/tests/0_dmesg + cat uuid + UUID=799963_1.5.2.3.1 [ 6.758579] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.845966] [ 6.924710] [ 6.998488] + set +x[ 7.009160] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-799963/environment / # . /lava-799963/environment/lava-799963/bin/lava-test-runner /lava-799963/1 / # /lava-799963/bin/lava-test-runner /lava-799963/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-799963/1/tests/1_bootrr + cat uuid + UUID=799963_1.5.2.3.5 [ 7.570740] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-799963/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-799963/1/../bin/lava-test-case [ 8.675656] /lava-799963/1/../bin/lava-test-case [ 8.756119] /lava-799963/1/../bin/lava-test-case [ 8.801957] + set +x[ 8.835016] / #