connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 16:14:48 CET 2017 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fefb4e0 -> 0x4fdf69bf (size 511 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/803382/tftp-deploy-wshyesix/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/803382/tftp-deploy-wshyesix/dtb/imx6dl-riotboard.dtb /mnt/tftp/803382/tftp-deploy-wshyesix/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/803382/tftp-deploy-wshyesix/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/803382/tftp-deploy-wshyesix/dtb/imx6dl-riotboard.dtb /mnt/tftp/803382/tftp-deploy-wshyesix/kernel/zImage warning: No MAC address set. Using random address 52:0f:0e:15:5a:39 eth0: 1000Mbps full duplex link detected T DHCP client bound to address 10.8.254.76 Loading ARM Linux zImage '/mnt/tftp/803382/tftp-deploy-wshyesix/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12893000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/803382/tftp-deploy-wshyesix/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d4444 Loading devicetree from '/mnt/tftp/803382/tftp-deploy-wshyesix/dtb/imx6dl-riotboard.dtb' mmc3: Cannot find nodepath /soc/aips-bus@02100000/usdhc@0219c000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc1,115200n8 Starting kernel at 0x12893000, initrd at 0x18000000, oftree at 0x188d5000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.256-cip80 (KernelCI@build-j91882-arm-gcc-10-imx-v6-v7-defconfig-9nbxn) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Wed Aug 31 12:52:57 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 938928K/1048576K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 44112K reserved, 65536K cma-reserved, 195688K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0 [ 0.000000] ccm: ldb_di1_sel already changed from reset value: 0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000034] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001492] Console: colour dummy device 80x30 [ 0.001534] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001554] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001571] ... MAX_LOCK_DEPTH: 48 [ 0.001586] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001602] ... CLASSHASH_SIZE: 4096 [ 0.001616] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001632] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001646] ... CHAINHASH_SIZE: 32768 [ 0.001661] memory used by lock dependency info: 4655 kB [ 0.001677] per task-struct memory footprint: 1536 bytes [ 0.001779] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001807] pid_max: default: 32768 minimum: 301 [ 0.002190] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002227] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005112] CPU: Testing write buffer coherency: ok [ 0.005200] CPU0: Spectre v2: using BPIALL workaround [ 0.006584] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008759] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009329] rcu: Hierarchical SRCU implementation. [ 0.011021] smp: Bringing up secondary CPUs ... [ 0.011048] smp: Brought up 1 node, 1 CPU [ 0.011070] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.011093] CPU: All CPU(s) started in SVC mode. [ 0.013500] devtmpfs: initialized [ 0.035421] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.036201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.036267] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.038901] pinctrl core: initialized pinctrl subsystem [ 0.044218] NET: Registered protocol family 16 [ 0.063289] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.066249] cpuidle: using governor menu [ 0.066477] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.083773] vdd1p1: supplied by regulator-dummy [ 0.085331] vdd3p0: supplied by regulator-dummy [ 0.086559] vdd2p5: supplied by regulator-dummy [ 0.087789] vddarm: supplied by regulator-dummy [ 0.089444] vddpu: supplied by regulator-dummy [ 0.090428] vddsoc: supplied by regulator-dummy [ 0.111967] No ATAGs? [ 0.112232] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.112325] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.114733] imx6dl-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.115738] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.176637] mxs-dma 110000.dma-apbh: initialized [ 0.182363] vgaarb: loaded [ 0.183353] SCSI subsystem initialized [ 0.184656] usbcore: registered new interface driver usbfs [ 0.184859] usbcore: registered new interface driver hub [ 0.184972] usbcore: registered new device driver usb [ 0.188579] i2c i2c-0: IMX I2C adapter registered [ 0.188624] i2c i2c-0: can't use DMA, using PIO instead. [ 0.190085] i2c i2c-1: IMX I2C adapter registered [ 0.190128] i2c i2c-1: can't use DMA, using PIO instead. [ 0.191245] i2c i2c-3: IMX I2C adapter registered [ 0.191285] i2c i2c-3: can't use DMA, using PIO instead. [ 0.191541] media: Linux media interface: v0.10 [ 0.191655] videodev: Linux video capture interface: v2.00 [ 0.192126] pps_core: LinuxPPS API ver. 1 registered [ 0.192148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.192203] PTP clock support registered [ 0.193012] Advanced Linux Sound Architecture Driver Initialized. [ 0.196286] Bluetooth: Core ver 2.22 [ 0.196406] NET: Registered protocol family 31 [ 0.196426] Bluetooth: HCI device and connection manager initialized [ 0.196545] Bluetooth: HCI socket layer initialized [ 0.196577] Bluetooth: L2CAP socket layer initialized [ 0.196768] Bluetooth: SCO socket layer initialized [ 0.198844] clocksource: Switched to clocksource mxc_timer1 [ 0.414736] VFS: Disk quotas dquot_6.6.0 [ 0.414900] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.439809] NET: Registered protocol family 2 [ 0.440391] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.442839] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.442959] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.443115] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.444110] TCP: Hash tables configured (established 8192 bind 8192) [ 0.444750] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.444931] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.445497] NET: Registered protocol family 1 [ 0.447413] RPC: Registered named UNIX socket transport module. [ 0.447488] RPC: Registered udp transport module. [ 0.447510] RPC: Registered tcp transport module. [ 0.447530] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.450123] Trying to unpack rootfs image as initramfs... [ 1.407752] Freeing initrd memory: 9044K [ 1.409877] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.414013] Initialise system trusted keyrings [ 1.414782] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.430606] NFS: Registering the id_resolver key type [ 1.430777] Key type id_resolver registered [ 1.430856] Key type id_legacy registered [ 1.431036] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.432511] fuse init (API version 7.27) [ 1.446796] Key type asymmetric registered [ 1.447005] Asymmetric key parser 'x509' registered [ 1.447289] bounce: pool size: 64 pages [ 1.447415] io scheduler noop registered [ 1.447439] io scheduler deadline registered [ 1.447781] io scheduler cfq registered (default) [ 1.447807] io scheduler mq-deadline registered [ 1.447829] io scheduler kyber registered [ 1.465402] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.465679] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.468199] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.468718] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.469221] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.469642] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.470161] PU : no governor for states [ 1.470222] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.473788] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 1.474664] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.474691] pfuze100-regulator 0-0008: pfuze100 found. [ 1.499250] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 1.502363] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX [ 2.416643] console [ttymxc1] enabled [ 2.422254] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 2.432492] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 70, base_baud = 5000000) is a IMX [ 2.442738] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 71, base_baud = 5000000) is a IMX [ 2.468352] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.474802] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.480477] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 2.499023] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.519886] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.531716] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.538416] [drm] No driver support for vblank timestamp query. [ 2.546088] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.553878] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.562474] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 2.577975] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.586505] [drm] Cannot find any crtc or sizes [ 2.594143] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.602203] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.630290] brd: module loaded [ 2.657819] loop: module loaded [ 2.670225] CAN device driver interface [ 2.676957] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator [ 2.685966] fec 2188000.ethernet: Linked as a consumer to regulator.0 [ 2.696060] pps pps0: new PPS source ptp0 [ 2.738017] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.745705] usbcore: registered new interface driver asix [ 2.751396] usbcore: registered new interface driver ax88179_178a [ 2.757594] usbcore: registered new interface driver cdc_ether [ 2.763738] usbcore: registered new interface driver net1080 [ 2.769645] usbcore: registered new interface driver cdc_subset [ 2.775661] usbcore: registered new interface driver zaurus [ 2.781534] usbcore: registered new interface driver cdc_ncm [ 2.787216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.793812] ehci-pci: EHCI PCI platform driver [ 2.798362] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.804575] usbcore: registered new interface driver usb-storage [ 2.814470] imx_usb 2184000.usb: Linked as a consumer to regulator.9 [ 2.830165] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.838574] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.848644] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.854111] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.888891] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.898638] hub 1-0:1.0: USB hub found [ 2.902855] hub 1-0:1.0: 1 port detected [ 2.919035] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.925479] i2c /dev entries driver [ 2.939536] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.946172] Bluetooth: HCI UART driver ver 2.3 [ 2.950717] Bluetooth: HCI UART protocol H4 registered [ 2.956399] Bluetooth: HCI UART protocol LL registered [ 2.963143] sdhci: Secure Digital Host Controller Interface driver [ 2.969408] sdhci: Copyright(c) Pierre Ossman [ 2.973783] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.981043] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.986278] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.991861] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 3.035772] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.046102] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.051892] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 3.057383] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 [ 3.100116] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.108890] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 [ 3.150616] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 3.167623] caam 2100000.caam: Entropy delay = 3200 [ 3.233463] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.294229] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.299272] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 3.305730] caam 2100000.caam: job rings = 2, qi = 0 [ 3.310906] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.345134] caam algorithms registered in /proc/crypto [ 3.357769] caam_jr 2101000.jr0: registering rng-caam [ 3.369964] usbcore: registered new interface driver usbhid [ 3.375610] usbhid: USB HID core driver [ 3.384345] mmc2: new DDR MMC card at address 0001 [ 3.394090] imx-media: subdev ipu1_vdic bound [ 3.403083] mmcblk2: mmc2:0001 MMC04G 3.58 GiB [ 3.409019] imx-media: subdev ipu2_vdic bound [ 3.413964] imx-media: subdev ipu1_ic_prp bound [ 3.419655] mmcblk2boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 3.427235] mmcblk2boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 3.435040] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.442585] imx-media: subdev ipu1_ic_prpenc bound [ 3.448885] mmcblk2rpmb: mmc2:0001 MMC04G partition 3 128 KiB, chardev (244:0) [ 3.457330] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.466865] imx-media: subdev ipu1_ic_prpvf bound [ 3.475820] imx-media: subdev ipu2_ic_prp bound [ 3.487315] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.497158] imx-media: subdev ipu2_ic_prpenc bound [ 3.502793] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.510001] imx-media: subdev ipu2_ic_prpvf bound [ 3.518322] hub 1-1:1.0: USB hub found [ 3.523541] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.530023] imx-media: subdev ipu1_csi0 bound [ 3.534517] hub 1-1:1.0: 4 ports detected [ 3.539523] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.545767] imx-media: subdev ipu1_csi1 bound [ 3.562310] sgtl5000 0-000a: Linked as a consumer to regulator.7 [ 3.568569] sgtl5000 0-000a: Linked as a consumer to regulator.8 [ 3.576909] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 3.587066] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.609555] [drm] Cannot find any crtc or sizes [ 3.638456] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.648518] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.687555] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 3.711041] NET: Registered protocol family 10 [ 3.719843] Segment Routing with IPv6 [ 3.723807] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.731766] NET: Registered protocol family 17 [ 3.736263] can: controller area network core (rev 20170425 abi 9) [ 3.742831] NET: Registered protocol family 29 [ 3.747305] can: raw protocol (rev 20170425) [ 3.751832] can: broadcast manager protocol (rev 20170425 t) [ 3.757537] can: netlink gateway (rev 20170425) max_hops=1 [ 3.763790] Key type dns_resolver registered [ 3.770260] cpu cpu0: Linked as a consumer to regulator.4 [ 3.775909] cpu cpu0: Linked as a consumer to regulator.5 [ 3.781636] cpu cpu0: Linked as a consumer to regulator.6 [ 3.791693] Registering SWP/SWPB emulation handler [ 3.798048] Loading compiled-in X.509 certificates [ 3.868420] imx-media: subdev ipu1_csi0_mux bound [ 3.874165] imx-media: subdev ipu1_csi1_mux bound [ 3.879240] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 3.884142] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 3.888926] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 3.894000] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 3.898941] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 3.903686] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 3.908807] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 3.914142] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 3.919425] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 3.924756] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 3.930039] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 3.934935] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 3.947801] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.960192] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.969675] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.017248] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.025112] ALSA device list: [ 4.028100] #0: imx6-riotboard-sgtl5000 [ 4.032937] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.041795] cfg80211: failed to load regulatory.db [ 4.050542] Freeing unused kernel memory: 1024K [ 4.069263] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.375859] udevd[158]: starting version 3.2.9 [ 4.382935] random: udevd: uninitialized urandom read (16 bytes read) [ 4.390741] random: udevd: uninitialized urandom read (16 bytes read) [ 4.397335] random: udevd: uninitialized urandom read (16 bytes read) [ 4.414589] udevd[158]: specified user 'tss' unknown [ 4.419964] udevd[158]: specified group 'tss' unknown [ 4.441922] udevd[159]: starting eudev-3.2.9 [ 5.761475] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 5.811652] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6d.bin failed with error -2 [ 5.860915] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6dl.bin failed with error -2 [ 5.895205] coda 2040000.vpu: firmware request failed done Saving random seed: [ 6.549332] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.726721] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-803382/environment . /lava-803382/environment / # /lava-803382/bin/lava-test-runner /lava-803382/0 /lava-803382/bin/lava-test-runner /lava-803382/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-803382/0/tests/0_dmesg + cat uuid + UUID=803382_1.5.2.3.1 [ 7.400524] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.479581] [ 7.549791] [ 7.620060] + set +x [ 7.630847] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-803382/environment / # . /lava-803382/environment/lava-803382/bin/lava-test-runner /lava-803382/1 / # /lava-803382/bin/lava-test-runner /lava-803382/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-803382/1/tests/1_bootrr + cat uuid + UUID=803382_1.5.2.3.5 [ 8.169313] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-803382/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-803382/1/../bin/lava-test-case [ 9.261711] /lava-803382/1/../bin/lava-test-case [ 9.329793] /lava-803382/1/../bin/lava-test-case [ 9.367658] + set +x [ 9.396281] / #