Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ser2net port 3015 device /dev/ttyfsl-ls1012a-rdb-1 [115200 N81] (Debian GNU/Linux) $$$20010203E773713C1A8FAEC5NOTICE: DDR Init Done NOTICE: BL2: v1.5(release):LSDK-20.04 NOTICE: BL2: Built : 05:21:36, Apr 9 2020 NOTICE: BL2: Booting BL31NOTICE: BL31: v1.5(release):LSDK-20.04 NOTICE: BL31: Built : 05:21:43, Apr 9 2020 NOTICE: Welcome to LS1012 BL31 Phase U-Boot 2019.10-g3cd9bc3993 (Apr 09 2020 - 05:21:04 +0800) SoC: LS1012AE Rev2.0 (0x87040020) Clock Configuration: CPU0(A53):1000 MHz Bus: 250 MHz DDR: 1000 MT/s Reset Configuration Word (RCW): 00000000: 0800000a 00000000 00000000 00000000 00000010: 35080000 c000000c 40000000 00001800 00000020: 00000000 00000000 00000000 00014571 00000030: 00000000 18c2a120 00000096 00000000 DRAM: 958 MiB Using SERDES1 Protocol: 13576 (0x3508) WARNING: Calling __hwconfig without a buffer and before environment is ready MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPI Flash... SF: Detected s25fl512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB OK In: serial Out: serial Err: serial Model: LS1012A RDB Board Board: LS1012ARDB Version: RevE, boot from QSPI: bank1 Net: PFE class pe firmware PFE tmu pe firmware Warning: pfe_eth0 (eth0) using random MAC address - c6:6e:cd:9a:d1:07 Warning: pfe_eth1 (eth1) using random MAC address - 4e:cb:ba:c9:de:6b eth0: pfe_eth0, eth1: pfe_eth1 Hit any key to stop autoboot: 10  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffffffffffff setenv initrd_high 0xffffffffffffffff => setenv fdt_high setenv fdt_high => pci enum; setenv ipaddr 172.16.1.37; setenv serverip 172.16.1.4; setenv ethact e1000#0; setenv ethprime e1000#0 pci enum; setenv ipaddr 172.16.1.37; setenv serverip 172.16.1.4; setenv ethact e1000#0; setenv ethprime e1000#0 PCIe0: pcie@3400000 Root Complex: x1 gen1 => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp 0x84080000 1048290/tftp-deploy-3r_klv0z/kernel/Image tftp 0x84080000 1048290/tftp-deploy-3r_klv0z/kernel/Image e1000: 00:1b:21:39:4a:ff Using e1000#0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.37 Filename '1048290/tftp-deploy-3r_klv0z/kernel/Image'. Load address: 0x84080000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 1.3 MiB/s done Bytes transferred = 19241472 (1259a00 hex) => tftp 0x88000000 1048290/tftp-deploy-3r_klv0z/ramdisk/ramdisk.cpio.gz.uboot tftp 0x88000000 1048290/tftp-deploy-3r_klv0z/ramdisk/ramdisk.cpio.gz.uboot Using e1000#0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.37 Filename '1048290/tftp-deploy-3r_klv0z/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x88000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## 1.7 MiB/s done Bytes transferred = 15177149 (e795bd hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x90000000 1048290/tftp-deploy-3r_klv0z/dtb/fsl-ls1012a-rdb.dtb tftp 0x90000000 1048290/tftp-deploy-3r_klv0z/dtb/fsl-ls1012a-rdb.dtb Using e1000#0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.37 Filename '1048290/tftp-deploy-3r_klv0z/dtb/fsl-ls1012a-rdb.dtb'. Load address: 0x90000000 Loading: *## 1000 Bytes/s done Bytes transferred = 9612 (258c hex) => setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 arm-smmu.disable_bypass=0console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 arm-smmu.disable_bypass=0console_msg_format=syslog earlycon ip=dhcp' => booti 0x84080000 0x88000000 0x90000000 booti 0x84080000 0x88000000 0x90000000 ## Loading init Ramdisk from Legacy Image at 88000000 ... Image Name: Created: 2022-08-31 13:02:55 UTC Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 15177085 Bytes = 14.5 MiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 90000000 Booting using the fdt blob at 0x90000000 Loading Device Tree to 00000000b7aa5000, end 00000000b7aaa58b ... OK WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND NOTICE: RNG: INSTANTIATED Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.256-cip80 (KernelCI@build-j91819-arm64-gcc-10-defconfig-bxk9q) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT Wed Aug 31 12:48:51 UTC 2022 [ 0.000000] Machine model: LS1012A RDB Board [ 0.000000] earlycon: uart8250 at MMIO 0x00000000021c0500 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x00000000b9c00000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000bbdfffff] [ 0.000000] NUMA: NODE_DATA [mem 0xbbde8dc0-0xbbdea57f] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bbdfffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bbdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bbdfffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 22 pages/cpu s52696 r8192 d29224 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241416 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 arm-smmu.disable_bypass=0console_msg_format=syslog earlycon ip=dhcp [ 0.000000] Memory: 897604K/980992K available (11132K kernel code, 1382K rwdata, 4960K rodata, 1280K init, 377K bss, 50620K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008380] Console: colour dummy device 80x25 [ 0.012928] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.023372] pid_max: default: 32768 minimum: 301 [ 0.028089] Security Framework initialized [ 0.032889] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.040415] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.047378] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.054148] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.062603] ASID allocator initialised with 32768 entries [ 0.068182] rcu: Hierarchical SRCU implementation. [ 0.073796] EFI services will not be available. [ 0.078458] smp: Bringing up secondary CPUs ... [ 0.083035] smp: Brought up 1 node, 1 CPU [ 0.087078] SMP: Total of 1 processors activated. [ 0.091826] CPU features: detected: 32-bit EL0 Support [ 0.097430] CPU: All CPU(s) started at EL2 [ 0.101567] alternatives: patching kernel code [ 0.107056] devtmpfs: initialized [ 0.112643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.122718] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.129994] pinctrl core: initialized pinctrl subsystem [ 0.138003] DMI not present or invalid. [ 0.144059] NET: Registered protocol family 16 [ 0.149118] audit: initializing netlink subsys (disabled) [ 0.156896] cpuidle: using governor menu [ 0.161221] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1 [ 0.170938] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.179086] DMA: preallocated 256 KiB pool for atomic allocations [ 0.187310] Serial: AMBA PL011 UART driver [ 0.197468] Machine: LS1012A RDB Board [ 0.201589] SoC family: QorIQ LS1012A [ 0.205276] SoC ID: svr:0x87040020, Revision: 2.0 [ 0.259319] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.267562] cryptd: max_cpu_qlen set to 1000 [ 0.272765] ACPI: Interpreter disabled. [ 0.279129] vgaarb: loaded [ 0.283334] SCSI subsystem initialized [ 0.287951] usbcore: registered new interface driver usbfs [ 0.294941] usbcore: registered new interface driver hub [ 0.300635] usbcore: registered new device driver usb [ 0.306796] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported [ 0.314789] i2c i2c-0: IMX I2C adapter registered [ 0.319701] i2c i2c-0: can't use DMA, using PIO instead. [ 0.325983] pps_core: LinuxPPS API ver. 1 registered [ 0.331407] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.340783] PTP clock support registered [ 0.345212] EDAC MC: Ver: 3.0.0 [ 0.350949] Advanced Linux Sound Architecture Driver Initialized. [ 0.358700] clocksource: Switched to clocksource arch_sys_counter [ 0.365463] VFS: Disk quotas dquot_6.6.0 [ 0.369627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.376893] pnp: PnP ACPI: disabled [ 0.397056] NET: Registered protocol family 2 [ 0.402061] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.409875] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes) [ 0.417834] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.425049] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.431810] TCP: Hash tables configured (established 8192 bind 8192) [ 0.438400] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.444456] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.451019] NET: Registered protocol family 1 [ 0.455836] RPC: Registered named UNIX socket transport module. [ 0.461849] RPC: Registered udp transport module. [ 0.466595] RPC: Registered tcp transport module. [ 0.471339] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.477998] Unpacking initramfs... [ 1.285067] Freeing initrd memory: 14816K [ 1.289534] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.297720] kvm [1]: 8-bit VMID [ 1.301629] kvm [1]: vgic interrupt IRQ1 [ 1.305680] kvm [1]: Hyp mode initialized successfully [ 1.314371] Initialise system trusted keyrings [ 1.320584] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 1.344480] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.352682] NFS: Registering the id_resolver key type [ 1.358322] Key type id_resolver registered [ 1.362754] Key type id_legacy registered [ 1.366884] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.373658] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.381438] 9p: Installing v9fs 9p2000 file system support [ 1.390668] Key type asymmetric registered [ 1.394930] Asymmetric key parser 'x509' registered [ 1.400005] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.407731] io scheduler noop registered [ 1.411709] io scheduler deadline registered [ 1.416325] io scheduler cfq registered (default) [ 1.421165] io scheduler mq-deadline registered [ 1.425751] io scheduler kyber registered [ 1.445398] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges: [ 1.453718] layerscape-pcie 3400000.pcie: IO 0x4000010000..0x400001ffff -> 0x00000000 [ 1.462248] layerscape-pcie 3400000.pcie: MEM 0x4040000000..0x407fffffff -> 0x40000000 [ 1.470842] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00 [ 1.477710] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.483271] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.489522] pci_bus 0000:00: root bus resource [mem 0x4040000000-0x407fffffff] (bus address [0x40000000-0x7fffffff]) [ 1.503045] pci 0000:00:00.0: BAR 14: assigned [mem 0x4040000000-0x40400fffff] [ 1.510562] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.516828] pci 0000:00:00.0: BAR 6: assigned [mem 0x4040100000-0x40401007ff pref] [ 1.524487] pci 0000:01:00.0: BAR 1: assigned [mem 0x4040000000-0x404007ffff] [ 1.531746] pci 0000:01:00.0: BAR 6: assigned [mem 0x4040080000-0x40400bffff pref] [ 1.539398] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400c0000-0x40400dffff] [ 1.546626] pci 0000:01:00.0: BAR 3: assigned [mem 0x40400e0000-0x40400e3fff] [ 1.553854] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 1.560019] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.565294] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.571443] pci 0000:00:00.0: bridge window [mem 0x4040000000-0x40400fffff] [ 1.581029] EINJ: ACPI disabled. [ 1.605001] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.615674] console [ttyS0] disabled [ 1.620655] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 13, base_baud = 7812500) is a 16550A [ 1.629601] console [ttyS0] enabled [ 1.629601] console [ttyS0] enabled [ 1.636814] bootconsole [uart8250] disabled [ 1.636814] bootconsole [uart8250] disabled [ 1.646367] SuperH (H)SCI(F) driver initialized [ 1.651959] msm_serial: driver initialized [ 1.657450] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.674348] loop: module loaded [ 1.681189] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 1.691964] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 1.703636] scsi host0: ahci-qoriq [ 1.707724] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 19 [ 1.721601] tun: Universal TUN/TAP device driver, 1.6 [ 1.729762] thunder_xcv, ver 1.0 [ 1.733814] thunder_bgx, ver 1.0 [ 1.737581] nicpf, ver 1.0 [ 1.741235] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.747451] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.754004] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.819365] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 1.889271] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:39:4a:ff [ 1.897446] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.904392] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: E42641-005 [ 1.911340] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.918473] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.924223] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.932148] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.938872] sky2: driver version 1.30 [ 1.944120] VFIO - User Level meta-driver version: 0.3 [ 1.950395] dwc3 2f00000.usb3: Failed to get clk 'ref': -2 [ 1.959181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.966545] ehci-pci: EHCI PCI platform driver [ 1.971306] ehci-platform: EHCI generic platform driver [ 1.977004] ehci-orion: EHCI orion driver [ 1.981302] ehci-exynos: EHCI EXYNOS driver [ 1.985824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.992156] ohci-pci: OHCI PCI platform driver [ 1.996781] ohci-platform: OHCI generic platform driver [ 2.002328] ohci-exynos: OHCI EXYNOS driver [ 2.007246] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.012957] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.021173] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010 [ 2.030632] ata1: SATA link down (SStatus 0 SControl 300) [ 2.036104] xhci-hcd xhci-hcd.0.auto: irq 18, io mem 0x02f00000 [ 2.043075] hub 1-0:1.0: USB hub found [ 2.047029] hub 1-0:1.0: 1 port detected [ 2.051426] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.057123] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.064864] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 2.071477] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.080350] hub 2-0:1.0: USB hub found [ 2.084310] hub 2-0:1.0: 1 port detected [ 2.089382] usbcore: registered new interface driver usb-storage [ 2.101364] i2c /dev entries driver [ 2.116170] sdhci: Secure Digital Host Controller Interface driver [ 2.124074] sdhci: Copyright(c) Pierre Ossman [ 2.129212] Synopsys Designware Multimedia Card Interface Driver [ 2.137121] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.170553] mmc0: SDHCI controller on 1560000.esdhc [1560000.esdhc] using ADMA 64-bit [ 2.179967] ledtrig-cpu: registered to indicate activity on CPUs [ 2.188923] usbcore: registered new interface driver usbhid [ 2.195973] usbhid: USB HID core driver [ 2.203075] optee: probing for conduit method from DT. [ 2.209634] optee: api uid mismatch [ 2.215066] NET: Registered protocol family 17 [ 2.220190] 9pnet: Installing 9P2000 support [ 2.224718] Key type dns_resolver registered [ 2.229952] registered taskstats version 1 [ 2.234406] Loading compiled-in X.509 certificates [ 2.240654] hctosys: unable to open rtc device (rtc0) [ 4.995697] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 5.034705] Sending DHCP requests .., OK [ 8.822666] IP-Config: Got DHCP answer from 172.16.1.4, my address is 172.16.1.245 [ 8.830269] IP-Config: Complete: [ 8.833521] device=eth0, hwaddr=00:1b:21:39:4a:ff, ipaddr=172.16.1.245, mask=255.255.255.0, gw=172.16.1.4 [ 8.843548] host=172.16.1.245, domain=example.org, nis-domain=(none) [ 8.850354] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= [ 8.850356] nameserver0=172.16.1.4 [ 8.860647] ALSA device list: [ 8.863638] No soundcards found. [ 8.868161] Freeing unused kernel memory: 1280K [ 8.872808] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 8.972741] udevd[1399]: starting version 3.2.9 [ 8.978105] random: udevd: uninitialized urandom read (16 bytes read) [ 8.985058] random: udevd: uninitialized urandom read (16 bytes read) [ 8.991744] random: udevd: uninitialized urandom read (16 bytes read) [ 9.003468] udevd[1399]: specified user 'tss' unknown [ 9.008731] udevd[1399]: specified group 'tss' unknown [ 9.016851] udevd[1400]: starting eudev-3.2.9 [ 9.438229] udevd[1406]: Error changing net interface name eth0 to enp1s0: Device or resource busy [ 9.487822] udevd[1406]: could not rename interface '2' from 'eth0' to 'enp1s0': Device or resource busy done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: [ 9.694119] NET: Registered protocol family 10 [ 9.700296] Segment Routing with IPv6 OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1048290/environment . /lava-1048290/environment / # /lava-1048290/bin/lava-test-runner /lava-1048290/0 /lava-1048290/bin/lava-test-runner /lava-1048290/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1048290/[ 10.236137] 0/tests/0_dmesg + cat uuid + UUID=1048290_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.267246] [ 10.297466] [ 10.328223] + set +x [ 10.337953] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1048290/environment / # . /lava-1048290/environment/lava-1048290/bin/lava-test-runner /lava-1048290/1 / # /lava-1048290/bin/lava-test-runner /lava-1048290/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1048290[ 10.797029] /1/tests/1_bootrr + cat uuid + UUID=1048290_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-1048290/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-1048290/1/../bin/lava-test-case [ 11.825633] /lava-1048290/1/../bin/lava-test-case [ 11.853437] /lava-1048290/1/../bin/lava-test-case [ 11.871702] + set +x [ 11.886990] / #