connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/860602/tftp-deploy-f1rpo8nk/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/860602/tftp-deploy-f1rpo8nk/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/860602/tftp-deploy-f1rpo8nk/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/860602/tftp-deploy-f1rpo8nk/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/860602/tftp-deploy-f1rpo8nk/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/860602/tftp-deploy-f1rpo8nk/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address a2:9e:f6:77:27:65 T eth0: DHCP client bound to address 10.8.254.37 Loading ARM Linux zImage '/mnt/tftp/860602/tftp-deploy-f1rpo8nk/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12896000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/860602/tftp-deploy-f1rpo8nk/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d440f Loading devicetree from '/mnt/tftp/860602/tftp-deploy-f1rpo8nk/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12896000, initrd at 0x18000000, oftree at 0x188d5000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.268-cip87 (KernelCI@build-j677455-arm-gcc-10-imx-v6-v7-defconfig-6hg99) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Sat Dec 10 00:41:16 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978976K/2097152K available (11264K kernel code, 880K rwdata, 3612K rodata, 1024K init, 7652K bss, 52640K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7653 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000038] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001655] Console: colour dummy device 80x30 [ 0.001699] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001718] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001735] ... MAX_LOCK_DEPTH: 48 [ 0.001753] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001770] ... CLASSHASH_SIZE: 4096 [ 0.001787] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001804] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001821] ... CHAINHASH_SIZE: 32768 [ 0.001837] memory used by lock dependency info: 4655 kB [ 0.001853] per task-struct memory footprint: 1536 bytes [ 0.001950] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001980] pid_max: default: 32768 minimum: 301 [ 0.002364] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002403] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005248] CPU: Testing write buffer coherency: ok [ 0.005335] CPU0: Spectre v2: using BPIALL workaround [ 0.006735] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008952] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009739] rcu: Hierarchical SRCU implementation. [ 0.011595] smp: Bringing up secondary CPUs ... [ 0.014025] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014036] CPU1: Spectre v2: using BPIALL workaround [ 0.016747] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.016758] CPU2: Spectre v2: using BPIALL workaround [ 0.018929] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.018942] CPU3: Spectre v2: using BPIALL workaround [ 0.019302] smp: Brought up 1 node, 4 CPUs [ 0.019329] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.019350] CPU: All CPU(s) started in SVC mode. [ 0.022097] devtmpfs: initialized [ 0.046901] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.049426] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.049493] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.053565] pinctrl core: initialized pinctrl subsystem [ 0.058918] NET: Registered protocol family 16 [ 0.077264] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.080564] cpuidle: using governor menu [ 0.080779] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.096585] vdd1p1: supplied by regulator-dummy [ 0.098102] vdd3p0: supplied by regulator-dummy [ 0.099330] vdd2p5: supplied by regulator-dummy [ 0.100582] vddarm: supplied by regulator-dummy [ 0.102271] vddpu: supplied by regulator-dummy [ 0.103124] vddsoc: supplied by regulator-dummy [ 0.128831] No ATAGs? [ 0.129283] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.129390] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.131797] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.132678] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.193190] mxs-dma 110000.dma-apbh: initialized [ 0.195951] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.195984] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.196012] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.196034] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.196120] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.199073] vgaarb: loaded [ 0.200181] SCSI subsystem initialized [ 0.201401] usbcore: registered new interface driver usbfs [ 0.201603] usbcore: registered new interface driver hub [ 0.201780] usbcore: registered new device driver usb [ 0.204714] i2c i2c-0: IMX I2C adapter registered [ 0.204759] i2c i2c-0: can't use DMA, using PIO instead. [ 0.206340] i2c i2c-1: IMX I2C adapter registered [ 0.206380] i2c i2c-1: can't use DMA, using PIO instead. [ 0.207685] i2c i2c-2: IMX I2C adapter registered [ 0.207725] i2c i2c-2: can't use DMA, using PIO instead. [ 0.208054] media: Linux media interface: v0.10 [ 0.208167] videodev: Linux video capture interface: v2.00 [ 0.208598] pps_core: LinuxPPS API ver. 1 registered [ 0.208623] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.208679] PTP clock support registered [ 0.209453] Advanced Linux Sound Architecture Driver Initialized. [ 0.212872] Bluetooth: Core ver 2.22 [ 0.212989] NET: Registered protocol family 31 [ 0.213010] Bluetooth: HCI device and connection manager initialized [ 0.213124] Bluetooth: HCI socket layer initialized [ 0.213158] Bluetooth: L2CAP socket layer initialized [ 0.213347] Bluetooth: SCO socket layer initialized [ 0.215303] clocksource: Switched to clocksource mxc_timer1 [ 0.426603] VFS: Disk quotas dquot_6.6.0 [ 0.426766] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.454109] NET: Registered protocol family 2 [ 0.454705] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.457233] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.457355] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.457521] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.458539] TCP: Hash tables configured (established 8192 bind 8192) [ 0.459230] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.459413] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.459999] NET: Registered protocol family 1 [ 0.462037] RPC: Registered named UNIX socket transport module. [ 0.462114] RPC: Registered udp transport module. [ 0.462136] RPC: Registered tcp transport module. [ 0.462157] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.464326] Trying to unpack rootfs image as initramfs... [ 1.421283] Freeing initrd memory: 9044K [ 1.422380] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.423096] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.427893] Initialise system trusted keyrings [ 1.428664] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.444107] NFS: Registering the id_resolver key type [ 1.444275] Key type id_resolver registered [ 1.444354] Key type id_legacy registered [ 1.444524] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.446238] fuse init (API version 7.27) [ 1.458402] Key type asymmetric registered [ 1.458562] Asymmetric key parser 'x509' registered [ 1.458838] bounce: pool size: 64 pages [ 1.458975] io scheduler noop registered [ 1.459002] io scheduler deadline registered [ 1.459353] io scheduler cfq registered (default) [ 1.459382] io scheduler mq-deadline registered [ 1.459404] io scheduler kyber registered [ 1.474203] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.474469] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.477190] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.477677] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.477905] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.478308] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.478780] PU : no governor for states [ 1.478835] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.482309] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.483186] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.483211] pfuze100-regulator 2-0008: pfuze100 found. [ 1.509478] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.475419] console [ttymxc0] enabled [ 2.482134] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.506512] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.512732] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.518972] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.524665] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.534154] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.542235] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.548430] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.557455] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.567534] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.574298] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.581100] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.588411] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.595153] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.601963] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.609631] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.618219] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.623152] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.632152] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.638912] [drm] No driver support for vblank timestamp query. [ 2.646389] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.654117] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.661936] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.669700] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.678255] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.693056] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.701530] [drm] Cannot find any crtc or sizes [ 2.709175] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.717252] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.745103] brd: module loaded [ 2.777207] loop: module loaded [ 2.782450] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.790501] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.798578] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.806826] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.817870] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.824879] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.833774] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.846441] scsi host0: ahci-imx [ 2.851231] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.867495] CAN device driver interface [ 2.874028] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.884060] pps pps0: new PPS source ptp0 [ 2.926244] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.933867] usbcore: registered new interface driver asix [ 2.939559] usbcore: registered new interface driver ax88179_178a [ 2.945827] usbcore: registered new interface driver cdc_ether [ 2.951758] usbcore: registered new interface driver net1080 [ 2.957668] usbcore: registered new interface driver cdc_subset [ 2.963680] usbcore: registered new interface driver zaurus [ 2.969499] usbcore: registered new interface driver cdc_ncm [ 2.975180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.981799] ehci-pci: EHCI PCI platform driver [ 2.986426] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.992634] usbcore: registered new interface driver usb-storage [ 3.002707] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.011283] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 3.021430] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.027033] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.065375] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.074945] hub 1-0:1.0: USB hub found [ 3.079064] hub 1-0:1.0: 1 port detected [ 3.094920] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.101486] i2c /dev entries driver [ 3.114883] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.121719] Bluetooth: HCI UART driver ver 2.3 [ 3.126285] Bluetooth: HCI UART protocol H4 registered [ 3.131544] Bluetooth: HCI UART protocol LL registered [ 3.138315] sdhci: Secure Digital Host Controller Interface driver [ 3.144515] sdhci: Copyright(c) Pierre Ossman [ 3.148945] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.156013] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.187704] ata1: SATA link down (SStatus 0 SControl 300) [ 3.193331] ahci-imx 2200000.sata: no device found, disabling link. [ 3.196754] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.199712] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.250316] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.260020] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.268504] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.275782] mmc0: new high speed SDHC card at address 1234 [ 3.287617] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.307672] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.322589] caam 2100000.caam: Entropy delay = 3200 [ 3.388367] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.449129] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.454119] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.460626] caam 2100000.caam: job rings = 2, qi = 0 [ 3.465825] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.484946] caam algorithms registered in /proc/crypto [ 3.496343] caam_jr 2101000.jr0: registering rng-caam [ 3.502977] usbcore: registered new interface driver usbhid [ 3.508671] usbhid: USB HID core driver [ 3.518259] imx-media: subdev ipu1_vdic bound [ 3.522956] imx-media: subdev ipu2_vdic bound [ 3.527833] imx-media: subdev ipu1_ic_prp bound [ 3.533815] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.541284] imx-media: subdev ipu1_ic_prpenc bound [ 3.546789] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.553731] imx-media: subdev ipu1_ic_prpvf bound [ 3.558695] imx-media: subdev ipu2_ic_prp bound [ 3.563802] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.566125] mmc2: new DDR MMC card at address 0001 [ 3.570988] imx-media: subdev ipu2_ic_prpenc bound [ 3.578127] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.581168] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.586684] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.592105] imx-media: subdev ipu2_ic_prpvf bound [ 3.599491] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.604429] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.609476] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.614831] imx-media: subdev ipu1_csi0 bound [ 3.624986] mmcblk2: p1 p2 [ 3.627444] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.635772] imx-media: subdev ipu1_csi1 bound [ 3.640896] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.647178] imx-media: subdev ipu2_csi0 bound [ 3.652239] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.658516] imx-media: subdev ipu2_csi1 bound [ 3.672175] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.678542] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.686262] hub 1-1:1.0: USB hub found [ 3.686612] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.691194] hub 1-1:1.0: 4 ports detected [ 3.700462] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.747367] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.756123] [drm] Cannot find any crtc or sizes [ 3.757549] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.163740] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.187263] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.199027] NET: Registered protocol family 10 [ 4.207034] Segment Routing with IPv6 [ 4.210939] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.218794] NET: Registered protocol family 17 [ 4.223285] can: controller area network core (rev 20170425 abi 9) [ 4.229728] NET: Registered protocol family 29 [ 4.234202] can: raw protocol (rev 20170425) [ 4.238681] can: broadcast manager protocol (rev 20170425 t) [ 4.244386] can: netlink gateway (rev 20170425) max_hops=1 [ 4.250587] Key type dns_resolver registered [ 4.256828] cpu cpu0: Linked as a consumer to regulator.4 [ 4.262469] cpu cpu0: Linked as a consumer to regulator.5 [ 4.268266] cpu cpu0: Linked as a consumer to regulator.6 [ 4.278595] Registering SWP/SWPB emulation handler [ 4.286976] Loading compiled-in X.509 certificates [ 4.358415] imx-media: subdev ipu1_csi0_mux bound [ 4.363911] imx-media: subdev ipu2_csi1_mux bound [ 4.368903] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.373808] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.378609] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.383690] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.388637] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.393376] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.398316] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.403054] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.407993] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.412726] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.417847] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.423180] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.428466] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.433795] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.439081] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.443976] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.459779] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.475820] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.485278] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.533098] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.541057] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.541589] ALSA device list: [ 4.549812] cfg80211: failed to load regulatory.db [ 4.557741] #0: imx6-wandboard-sgtl5000 [ 4.561770] #1: imx-spdif [ 4.569106] Freeing unused kernel memory: 1024K [ 4.626329] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.904653] udevd[182]: starting version 3.2.9 [ 4.911612] random: udevd: uninitialized urandom read (16 bytes read) [ 4.918667] random: udevd: uninitialized urandom read (16 bytes read) [ 4.925339] random: udevd: uninitialized urandom read (16 bytes read) [ 4.941903] udevd[182]: specified user 'tss' unknown [ 4.947116] udevd[182]: specified group 'tss' unknown [ 4.958304] udevd[183]: starting eudev-3.2.9 [ 5.540363] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.553186] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.563614] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.583174] coda 2040000.vpu: firmware request failed done Saving random seed: OK Starting network: OK Starting dropbear sshd: [ 6.093535] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-860602/environment . /lava-860602/environment / # /lava-860602/bin/lava-test-runner /lava-860602/0 /lava-860602/bin/lava-test-runner /lava-860602/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-860602/0/tests/0_dmesg + cat uuid + UUID=860602_1.5.2.3.1[ 6.767189] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.856542] [ 6.936121] [ 7.014515] + set +x [ 7.025461] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-860602/environment / # . /lava-860602/environment/lava-860602/bin/lava-test-runner /lava-860602/1 / # /lava-860602/bin/lava-test-runner /lava-860602/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-860602/1/tests/1_bootrr + cat uuid + UUID=860602_1.5.2.3.5[ 7.586185] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-860602/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-860602/1/../bin/lava-test-case [ 8.690916] /lava-860602/1/../bin/lava-test-case [ 8.770814] /lava-860602/1/../bin/lava-test-case [ 8.816270] + set +x [ 8.848840] / #