connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/902905/tftp-deploy-h6ucw7r_/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/902905/tftp-deploy-h6ucw7r_/dtb/imx6dl-riotboard.dtb /mnt/tftp/902905/tftp-deploy-h6ucw7r_/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/902905/tftp-deploy-h6ucw7r_/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/902905/tftp-deploy-h6ucw7r_/dtb/imx6dl-riotboard.dtb /mnt/tftp/902905/tftp-deploy-h6ucw7r_/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 42:73:b9:83:dc:be eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.213 Loading ARM Linux zImage '/mnt/tftp/902905/tftp-deploy-h6ucw7r_/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1289a000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/902905/tftp-deploy-h6ucw7r_/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d7219 Loading devicetree from '/mnt/tftp/902905/tftp-deploy-h6ucw7r_/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x1289a000, initrd at 0x18000000, oftree at 0x188d8000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.272-cip91 (KernelCI@build-j1017018-arm-gcc-10-imx-v6-v7-defconfig-rd9hv) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Feb 10 10:26:44 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 938692K/1048576K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 44348K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000039] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001609] Console: colour dummy device 80x30 [ 0.001651] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001671] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001690] ... MAX_LOCK_DEPTH: 48 [ 0.001707] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001725] ... CLASSHASH_SIZE: 4096 [ 0.001743] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001761] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001778] ... CHAINHASH_SIZE: 32768 [ 0.001796] memory used by lock dependency info: 4655 kB [ 0.001813] per task-struct memory footprint: 1536 bytes [ 0.001911] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001942] pid_max: default: 32768 minimum: 301 [ 0.002315] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002353] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005243] CPU: Testing write buffer coherency: ok [ 0.005334] CPU0: Spectre v2: using BPIALL workaround [ 0.006705] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008923] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009746] rcu: Hierarchical SRCU implementation. [ 0.011193] smp: Bringing up secondary CPUs ... [ 0.011220] smp: Brought up 1 node, 1 CPU [ 0.011243] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.011265] CPU: All CPU(s) started in SVC mode. [ 0.013679] devtmpfs: initialized [ 0.037596] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.038414] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038480] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.041273] pinctrl core: initialized pinctrl subsystem [ 0.046558] NET: Registered protocol family 16 [ 0.067595] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.070752] cpuidle: using governor menu [ 0.070986] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.089178] vdd1p1: supplied by regulator-dummy [ 0.090863] vdd3p0: supplied by regulator-dummy [ 0.092145] vdd2p5: supplied by regulator-dummy [ 0.093433] vddarm: supplied by regulator-dummy [ 0.095208] vddpu: supplied by regulator-dummy [ 0.096103] vddsoc: supplied by regulator-dummy [ 0.118844] No ATAGs? [ 0.119116] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.119215] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.121829] imx6dl-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.122864] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.186602] mxs-dma 110000.dma-apbh: initialized [ 0.192457] vgaarb: loaded [ 0.193459] SCSI subsystem initialized [ 0.194786] usbcore: registered new interface driver usbfs [ 0.195004] usbcore: registered new interface driver hub [ 0.195121] usbcore: registered new device driver usb [ 0.198807] i2c i2c-0: IMX I2C adapter registered [ 0.198855] i2c i2c-0: can't use DMA, using PIO instead. [ 0.200101] i2c i2c-1: IMX I2C adapter registered [ 0.200144] i2c i2c-1: can't use DMA, using PIO instead. [ 0.201188] i2c i2c-3: IMX I2C adapter registered [ 0.201231] i2c i2c-3: can't use DMA, using PIO instead. [ 0.201412] media: Linux media interface: v0.10 [ 0.201536] videodev: Linux video capture interface: v2.00 [ 0.202019] pps_core: LinuxPPS API ver. 1 registered [ 0.202044] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.202105] PTP clock support registered [ 0.202944] Advanced Linux Sound Architecture Driver Initialized. [ 0.206253] Bluetooth: Core ver 2.22 [ 0.206379] NET: Registered protocol family 31 [ 0.206405] Bluetooth: HCI device and connection manager initialized [ 0.206525] Bluetooth: HCI socket layer initialized [ 0.206560] Bluetooth: L2CAP socket layer initialized [ 0.206753] Bluetooth: SCO socket layer initialized [ 0.208833] clocksource: Switched to clocksource mxc_timer1 [ 0.432075] VFS: Disk quotas dquot_6.6.0 [ 0.432242] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.457847] NET: Registered protocol family 2 [ 0.458450] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.461008] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.461129] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.461287] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.462297] TCP: Hash tables configured (established 8192 bind 8192) [ 0.462936] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.463119] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.463673] NET: Registered protocol family 1 [ 0.465625] RPC: Registered named UNIX socket transport module. [ 0.465703] RPC: Registered udp transport module. [ 0.465725] RPC: Registered tcp transport module. [ 0.465748] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.468266] Trying to unpack rootfs image as initramfs... [ 1.442358] Freeing initrd memory: 9056K [ 1.444323] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.448573] Initialise system trusted keyrings [ 1.449791] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.466320] NFS: Registering the id_resolver key type [ 1.466505] Key type id_resolver registered [ 1.466587] Key type id_legacy registered [ 1.466760] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.468288] fuse init (API version 7.27) [ 1.482862] Key type asymmetric registered [ 1.483074] Asymmetric key parser 'x509' registered [ 1.483361] bounce: pool size: 64 pages [ 1.483493] io scheduler noop registered [ 1.483519] io scheduler deadline registered [ 1.483848] io scheduler cfq registered (default) [ 1.483875] io scheduler mq-deadline registered [ 1.483898] io scheduler kyber registered [ 1.502219] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.502503] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.505080] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.505609] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.505831] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.506247] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.506759] PU : no governor for states [ 1.506819] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.510667] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 1.511548] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.511575] pfuze100-regulator 0-0008: pfuze100 found. [ 1.536368] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 1.539640] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX [ 2.441632] console [ttymxc1] enabled [ 2.447229] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 2.457625] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 70, base_baud = 5000000) is a IMX [ 2.467997] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 71, base_baud = 5000000) is a IMX [ 2.493906] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.500398] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.506004] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 2.524647] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.545666] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.557603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.564435] [drm] No driver support for vblank timestamp query. [ 2.572083] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.579964] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.588524] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 2.604168] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.612712] [drm] Cannot find any crtc or sizes [ 2.620376] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.628358] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.657530] brd: module loaded [ 2.686248] loop: module loaded [ 2.698909] CAN device driver interface [ 2.705762] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator [ 2.714748] fec 2188000.ethernet: Linked as a consumer to regulator.0 [ 2.724825] pps pps0: new PPS source ptp0 [ 2.767661] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.775340] usbcore: registered new interface driver asix [ 2.781034] usbcore: registered new interface driver ax88179_178a [ 2.787229] usbcore: registered new interface driver cdc_ether [ 2.793365] usbcore: registered new interface driver net1080 [ 2.799275] usbcore: registered new interface driver cdc_subset [ 2.805293] usbcore: registered new interface driver zaurus [ 2.811182] usbcore: registered new interface driver cdc_ncm [ 2.816862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.823459] ehci-pci: EHCI PCI platform driver [ 2.828017] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.834247] usbcore: registered new interface driver usb-storage [ 2.844347] imx_usb 2184000.usb: Linked as a consumer to regulator.9 [ 2.860304] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.868724] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.878921] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.884224] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.918884] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.928696] hub 1-0:1.0: USB hub found [ 2.932922] hub 1-0:1.0: 1 port detected [ 2.949393] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.955846] i2c /dev entries driver [ 2.970116] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.976797] Bluetooth: HCI UART driver ver 2.3 [ 2.981345] Bluetooth: HCI UART protocol H4 registered [ 2.987034] Bluetooth: HCI UART protocol LL registered [ 2.993788] sdhci: Secure Digital Host Controller Interface driver [ 3.000055] sdhci: Copyright(c) Pierre Ossman [ 3.004431] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.011747] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 3.016983] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 3.022578] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 3.065560] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.075660] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.081264] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 3.086755] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 [ 3.128007] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.138102] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 [ 3.179012] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 3.195730] caam 2100000.caam: Entropy delay = 3200 [ 3.261575] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.322340] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.327336] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 3.333845] caam 2100000.caam: job rings = 2, qi = 0 [ 3.339007] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.373685] caam algorithms registered in /proc/crypto [ 3.386930] caam_jr 2101000.jr0: registering rng-caam [ 3.398630] usbcore: registered new interface driver usbhid [ 3.404542] usbhid: USB HID core driver [ 3.410488] mmc2: new DDR MMC card at address 0001 [ 3.421922] mmcblk2: mmc2:0001 MMC04G 3.58 GiB [ 3.428198] mmcblk2boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 3.439274] imx-media: subdev ipu1_vdic bound [ 3.444020] imx-media: subdev ipu2_vdic bound [ 3.448940] imx-media: subdev ipu1_ic_prp bound [ 3.456193] mmcblk2boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 3.463150] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.471309] mmcblk2rpmb: mmc2:0001 MMC04G partition 3 128 KiB, chardev (244:0) [ 3.479122] imx-media: subdev ipu1_ic_prpenc bound [ 3.487780] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.499161] imx-media: subdev ipu1_ic_prpvf bound [ 3.508051] imx-media: subdev ipu2_ic_prp bound [ 3.518369] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.525771] imx-media: subdev ipu2_ic_prpenc bound [ 3.531342] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.538292] imx-media: subdev ipu2_ic_prpvf bound [ 3.544727] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.551135] imx-media: subdev ipu1_csi0 bound [ 3.559243] hub 1-1:1.0: USB hub found [ 3.563755] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.570101] hub 1-1:1.0: 4 ports detected [ 3.574260] imx-media: subdev ipu1_csi1 bound [ 3.591219] sgtl5000 0-000a: Linked as a consumer to regulator.7 [ 3.597562] sgtl5000 0-000a: Linked as a consumer to regulator.8 [ 3.605918] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 3.616531] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.663471] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.673686] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.689594] [drm] Cannot find any crtc or sizes [ 3.717501] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 3.741208] NET: Registered protocol family 10 [ 3.750001] Segment Routing with IPv6 [ 3.753970] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.761977] NET: Registered protocol family 17 [ 3.766475] can: controller area network core (rev 20170425 abi 9) [ 3.773651] NET: Registered protocol family 29 [ 3.778132] can: raw protocol (rev 20170425) [ 3.782665] can: broadcast manager protocol (rev 20170425 t) [ 3.788372] can: netlink gateway (rev 20170425) max_hops=1 [ 3.794628] Key type dns_resolver registered [ 3.800466] cpu cpu0: Linked as a consumer to regulator.4 [ 3.806107] cpu cpu0: Linked as a consumer to regulator.5 [ 3.811835] cpu cpu0: Linked as a consumer to regulator.6 [ 3.821966] Registering SWP/SWPB emulation handler [ 3.828403] Loading compiled-in X.509 certificates [ 3.901667] imx-media: subdev ipu1_csi0_mux bound [ 3.907265] imx-media: subdev ipu1_csi1_mux bound [ 3.912423] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 3.917327] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 3.922118] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 3.927194] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 3.932136] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 3.936870] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 3.941989] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 3.947323] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 3.952604] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 3.957934] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 3.963221] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 3.968116] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 3.981247] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.993619] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.003125] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.050626] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.058040] ALSA device list: [ 4.061101] #0: imx6-riotboard-sgtl5000 [ 4.065837] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.074997] cfg80211: failed to load regulatory.db [ 4.083938] Freeing unused kernel memory: 1024K [ 4.110104] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.418407] udevd[158]: starting version 3.2.9 [ 4.425467] random: udevd: uninitialized urandom read (16 bytes read) [ 4.433371] random: udevd: uninitialized urandom read (16 bytes read) [ 4.440161] random: udevd: uninitialized urandom read (16 bytes read) [ 4.457308] udevd[158]: specified user 'tss' unknown [ 4.462756] udevd[158]: specified group 'tss' unknown [ 4.475742] udevd[159]: starting eudev-3.2.9 [ 5.814425] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 5.864439] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6d.bin failed with error -2 [ 5.924477] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6dl.bin failed with error -2 [ 5.956107] coda 2040000.vpu: firmware request failed done Saving random seed: [ 6.630431] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.808182] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-902905/environment . /lava-902905/environment / # /lava-902905/bin/lava-test-runner /lava-902905/0 /lava-902905/bin/lava-test-runner /lava-902905/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-902905/0/tests/0_dmesg + cat uuid + UUID=902905_1.5.2.3.1 [ 7.473718] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.553625] [ 7.625135] [ 7.696109] + set +x [ 7.706828] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-902905/environment / # . /lava-902905/environment/lava-902905/bin/lava-test-runner /lava-902905/1 / # /lava-902905/bin/lava-test-runner /lava-902905/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-902905/1/tests/1_bootrr + cat uuid + UUID=902905_1.5.2.3.5 [ 8.259295] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-902905/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-902905/1/../bin/lava-test-case [ 8.354843] /lava-902905/1/../bin/lava-test-case [ 8.422570] /lava-902905/1/../bin/lava-test-case [ 8.460779] + set +x [ 8.489001] / #