connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/919775/tftp-deploy-0oayzsy8/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/919775/tftp-deploy-0oayzsy8/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/919775/tftp-deploy-0oayzsy8/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/919775/tftp-deploy-0oayzsy8/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/919775/tftp-deploy-0oayzsy8/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/919775/tftp-deploy-0oayzsy8/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address c2:0e:2e:bc:6e:97 T eth0: DHCP client bound to address 10.8.254.56 Loading ARM Linux zImage '/mnt/tftp/919775/tftp-deploy-0oayzsy8/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13166000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/919775/tftp-deploy-0oayzsy8/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18ecc207 Loading devicetree from '/mnt/tftp/919775/tftp-deploy-0oayzsy8/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13166000, initrd at 0x18000000, oftree at 0x18ecd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.276-cip93 (KernelCI@build-j1168825-arm-gcc-10-multi-v7-defconfig-kselftest-7qsv7) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Mon Mar 13 12:22:16 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s40104 r8192 d21336 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1963744K/2097152K available (15360K kernel code, 1759K rwdata, 6284K rodata, 2048K init, 7699K bss, 67872K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1760 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7700 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 48519 entries in 190 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000038] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003618] Console: colour dummy device 80x30 [ 0.003669] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003693] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003716] ... MAX_LOCK_DEPTH: 48 [ 0.003739] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003760] ... CLASSHASH_SIZE: 4096 [ 0.003782] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003803] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003825] ... CHAINHASH_SIZE: 32768 [ 0.003847] memory used by lock dependency info: 4655 kB [ 0.003868] per task-struct memory footprint: 1536 bytes [ 0.003953] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003992] pid_max: default: 32768 minimum: 301 [ 0.004332] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004377] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006414] CPU: Testing write buffer coherency: ok [ 0.006504] CPU0: Spectre v2: using BPIALL workaround [ 0.007697] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010257] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.012550] rcu: Hierarchical SRCU implementation. [ 0.016858] EFI services will not be available. [ 0.017909] smp: Bringing up secondary CPUs ... [ 0.020568] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020582] CPU1: Spectre v2: using BPIALL workaround [ 0.023608] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023623] CPU2: Spectre v2: using BPIALL workaround [ 0.026294] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.026307] CPU3: Spectre v2: using BPIALL workaround [ 0.026769] smp: Brought up 1 node, 4 CPUs [ 0.026801] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026827] CPU: All CPU(s) started in SVC mode. [ 0.029570] devtmpfs: initialized [ 0.064596] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.067324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067389] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.071641] pinctrl core: initialized pinctrl subsystem [ 0.076798] DMI not present or invalid. [ 0.078831] NET: Registered protocol family 16 [ 0.087490] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.094453] cpuidle: using governor menu [ 0.094937] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.125244] vdd1p1: supplied by regulator-dummy [ 0.127356] vdd3p0: supplied by regulator-dummy [ 0.129334] vdd2p5: supplied by regulator-dummy [ 0.131221] vddarm: supplied by regulator-dummy [ 0.133766] vddpu: supplied by regulator-dummy [ 0.135137] vddsoc: supplied by regulator-dummy [ 0.185391] No ATAGs? [ 0.185910] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.185999] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.196566] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.197816] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.214893] Serial: AMBA PL011 UART driver [ 0.316142] mxs-dma 110000.dma-apbh: initialized [ 0.324197] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.324235] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.324267] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.324296] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.324392] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.334926] vgaarb: loaded [ 0.337874] SCSI subsystem initialized [ 0.339494] usbcore: registered new interface driver usbfs [ 0.339718] usbcore: registered new interface driver hub [ 0.339888] usbcore: registered new device driver usb [ 0.344008] i2c i2c-0: IMX I2C adapter registered [ 0.344064] i2c i2c-0: can't use DMA, using PIO instead. [ 0.345994] i2c i2c-1: IMX I2C adapter registered [ 0.346055] i2c i2c-1: can't use DMA, using PIO instead. [ 0.347884] i2c i2c-2: IMX I2C adapter registered [ 0.347936] i2c i2c-2: can't use DMA, using PIO instead. [ 0.351774] pps_core: LinuxPPS API ver. 1 registered [ 0.351804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.351884] PTP clock support registered [ 0.352679] EDAC MC: Ver: 3.0.0 [ 0.364158] clocksource: Switched to clocksource mxc_timer1 [ 0.631687] NET: Registered protocol family 2 [ 0.632335] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.634972] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.635128] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.635360] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.636636] TCP: Hash tables configured (established 8192 bind 8192) [ 0.637216] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.637471] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.638159] NET: Registered protocol family 1 [ 0.640341] RPC: Registered named UNIX socket transport module. [ 0.640394] RPC: Registered udp transport module. [ 0.640422] RPC: Registered tcp transport module. [ 0.640448] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.642430] Trying to unpack rootfs image as initramfs... [ 2.494526] Freeing initrd memory: 15156K [ 2.495218] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.496167] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.503792] Initialise system trusted keyrings [ 2.504939] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 2.534866] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.537768] NFS: Registering the id_resolver key type [ 2.537922] Key type id_resolver registered [ 2.537983] Key type id_legacy registered [ 2.538186] ntfs: driver 2.1.32 [Flags: R/O]. [ 2.546165] Key type asymmetric registered [ 2.546279] Asymmetric key parser 'x509' registered [ 2.546623] bounce: pool size: 64 pages [ 2.546759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.546841] io scheduler noop registered [ 2.546876] io scheduler deadline registered [ 2.547371] io scheduler cfq registered (default) [ 2.547409] io scheduler mq-deadline registered [ 2.547440] io scheduler kyber registered [ 2.548085] test_firmware: interface ready [ 2.659405] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 2.659856] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 2.660098] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 2.660658] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 2.661257] PU : no governor for states [ 2.661336] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 2.683686] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.683980] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 2.873269] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.885771] SuperH (H)SCI(F) driver initialized [ 2.887895] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 3.847529] console [ttymxc0] enabled [ 3.854410] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 3.866957] msm_serial: driver initialized [ 3.871865] STMicroelectronics ASC driver initialized [ 3.881737] STM32 USART driver initialized [ 3.900549] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 3.954169] brd: module loaded [ 3.992311] loop: module loaded [ 4.005450] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 4.013434] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 4.021540] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 4.029801] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.041011] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.048113] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.057007] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.069871] scsi host0: ahci-imx [ 4.075103] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 4.117577] CAN device driver interface [ 4.124726] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.133509] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 4.143776] pps pps0: new PPS source ptp0 [ 4.195516] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.204446] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.210306] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.216488] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.223475] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.244632] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.252178] usbcore: registered new interface driver pegasus [ 4.258093] usbcore: registered new interface driver asix [ 4.263630] usbcore: registered new interface driver ax88179_178a [ 4.269910] usbcore: registered new interface driver cdc_ether [ 4.275979] usbcore: registered new interface driver smsc75xx [ 4.281904] usbcore: registered new interface driver smsc95xx [ 4.287850] usbcore: registered new interface driver net1080 [ 4.293645] usbcore: registered new interface driver cdc_subset [ 4.299748] usbcore: registered new interface driver zaurus [ 4.305635] usbcore: registered new interface driver cdc_ncm [ 4.319243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.325864] ehci-pci: EHCI PCI platform driver [ 4.330451] ehci-platform: EHCI generic platform driver [ 4.336498] ehci-orion: EHCI orion driver [ 4.341185] SPEAr-ehci: EHCI SPEAr driver [ 4.345903] ehci-st: EHCI STMicroelectronics driver [ 4.351423] ehci-exynos: EHCI EXYNOS driver [ 4.356298] ehci-atmel: EHCI Atmel driver [ 4.360936] tegra-ehci: Tegra EHCI driver [ 4.365669] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.371929] ohci-pci: OHCI PCI platform driver [ 4.376595] ohci-platform: OHCI generic platform driver [ 4.382550] SPEAr-ohci: OHCI SPEAr driver [ 4.387264] ohci-st: OHCI STMicroelectronics driver [ 4.392774] ohci-atmel: OHCI Atmel driver [ 4.399353] usbcore: registered new interface driver usb-storage [ 4.411693] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 4.416691] ata1: SATA link down (SStatus 0 SControl 300) [ 4.420274] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 4.425504] ahci-imx 2200000.sata: no device found, disabling link. [ 4.437046] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.438110] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.443275] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.484022] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.493587] hub 1-0:1.0: USB hub found [ 4.497799] hub 1-0:1.0: 1 port detected [ 4.523167] i2c /dev entries driver [ 4.571731] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 4.592046] sdhci: Secure Digital Host Controller Interface driver [ 4.598329] sdhci: Copyright(c) Pierre Ossman [ 4.608485] Synopsys Designware Multimedia Card Interface Driver [ 4.619926] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.627488] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 4.669297] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 4.709828] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 4.718344] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 4.733214] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.748799] mmc0: new high speed SDHC card at address 1234 [ 4.758116] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 4.758989] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.779453] ledtrig-cpu: registered to indicate activity on CPUs [ 4.787794] usbcore: registered new interface driver usbhid [ 4.793396] usbhid: USB HID core driver [ 4.794056] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.814080] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 4.821221] IPv4 over IPsec tunneling driver [ 4.829368] NET: Registered protocol family 10 [ 4.838661] Segment Routing with IPv6 [ 4.844943] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.855228] NET: Registered protocol family 17 [ 4.859743] can: controller area network core (rev 20170425 abi 9) [ 4.866339] NET: Registered protocol family 29 [ 4.870829] can: raw protocol (rev 20170425) [ 4.875293] can: broadcast manager protocol (rev 20170425 t) [ 4.881014] can: netlink gateway (rev 20170425) max_hops=1 [ 4.887978] Key type dns_resolver registered [ 4.902989] cpu cpu0: Linked as a consumer to regulator.4 [ 4.908789] cpu cpu0: Linked as a consumer to regulator.5 [ 4.914578] cpu cpu0: Linked as a consumer to regulator.6 [ 4.924785] ThumbEE CPU extension supported. [ 4.929116] Registering SWP/SWPB emulation handler [ 4.936409] Loading compiled-in X.509 certificates [ 5.024951] mmc2: new DDR MMC card at address 0001 [ 5.032621] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 5.034891] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 5.039110] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 5.054624] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 5.060851] hctosys: unable to open rtc device (rtc0) [ 5.066440] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 5.077060] mmcblk2: p1 p2 [ 5.089051] hub 1-1:1.0: USB hub found [ 5.093759] hub 1-1:1.0: 4 ports detected [ 5.126162] Freeing unused kernel memory: 2048K [ 5.134617] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.510965] udevd[110]: starting version 3.2.9 [ 5.518865] random: udevd: uninitialized urandom read (16 bytes read) [ 5.526187] random: udevd: uninitialized urandom read (16 bytes read) [ 5.532815] random: udevd: uninitialized urandom read (16 bytes read) [ 5.551328] udevd[110]: specified user 'tss' unknown [ 5.557187] udevd[110]: specified group 'tss' unknown [ 5.569176] udevd[111]: starting eudev-3.2.9 [ 6.554740] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.566519] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.580087] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 6.586799] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.632686] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.645963] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.652125] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.664671] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 [ 6.827394] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 6.833850] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 6.846509] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.873152] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: [ 7.488311] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 7.771510] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-919775/environment . /lava-919775/environment / # /lava-919775/bin/lava-test-runner /lava-919775/0 /lava-919775/bin/lava-test-runner /lava-919775/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-919775/0/tests/0_dmesg + cat uuid + UUID=919775_1.5.2.3.1[ 8.512288] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.625595] [ 8.723480] [ 8.820268] + set +x [ 8.831940] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-919775/environment / # . /lava-919775/environment/lava-919775/bin/lava-test-runner /lava-919775/1 / # /lava-919775/bin/lava-test-runner /lava-919775/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-919775/1/tests/1_bootrr + cat uuid + UUID=919775_1.5.2.3.5[ 9.443808] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-919775/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-919775/1/../bin/lava-test-case [ 10.623225] /lava-919775/1/../bin/lava-test-case [ 10.730432] /lava-919775/1/../bin/lava-test-case [ 10.790404] + set +x [ 10.832481] / #