connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/921682/tftp-deploy-u3yavngd/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/921682/tftp-deploy-u3yavngd/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/921682/tftp-deploy-u3yavngd/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/921682/tftp-deploy-u3yavngd/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/921682/tftp-deploy-u3yavngd/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/921682/tftp-deploy-u3yavngd/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address f2:ca:66:ef:91:94 T eth0: DHCP client bound to address 10.8.254.245 Loading ARM Linux zImage '/mnt/tftp/921682/tftp-deploy-u3yavngd/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x131d4000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/921682/tftp-deploy-u3yavngd/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18eac46a Loading devicetree from '/mnt/tftp/921682/tftp-deploy-u3yavngd/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x131d4000, initrd at 0x18000000, oftree at 0x18ead000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.277-cip94 (KernelCI@build-j1225729-arm-gcc-10-multi-v7-defconfig-kselftest-96h2r) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Wed Mar 22 06:50:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s40104 r8192 d21336 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1963868K/2097152K available (15360K kernel code, 1762K rwdata, 6312K rodata, 2048K init, 7700K bss, 67748K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1763 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7701 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 49054 entries in 192 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000039] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003637] Console: colour dummy device 80x30 [ 0.003691] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003714] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003737] ... MAX_LOCK_DEPTH: 48 [ 0.003759] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003782] ... CLASSHASH_SIZE: 4096 [ 0.003804] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003826] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003847] ... CHAINHASH_SIZE: 32768 [ 0.003869] memory used by lock dependency info: 4655 kB [ 0.003891] per task-struct memory footprint: 1536 bytes [ 0.003978] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004013] pid_max: default: 32768 minimum: 301 [ 0.004357] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004401] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006448] CPU: Testing write buffer coherency: ok [ 0.006530] CPU0: Spectre v2: using BPIALL workaround [ 0.007710] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010250] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.012588] rcu: Hierarchical SRCU implementation. [ 0.017045] EFI services will not be available. [ 0.018067] smp: Bringing up secondary CPUs ... [ 0.020706] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020719] CPU1: Spectre v2: using BPIALL workaround [ 0.023749] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023760] CPU2: Spectre v2: using BPIALL workaround [ 0.026434] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.026446] CPU3: Spectre v2: using BPIALL workaround [ 0.026907] smp: Brought up 1 node, 4 CPUs [ 0.026941] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026966] CPU: All CPU(s) started in SVC mode. [ 0.029712] devtmpfs: initialized [ 0.064346] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.067110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067173] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.071418] pinctrl core: initialized pinctrl subsystem [ 0.076527] DMI not present or invalid. [ 0.078530] NET: Registered protocol family 16 [ 0.087375] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.094225] cpuidle: using governor menu [ 0.094700] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.124977] vdd1p1: supplied by regulator-dummy [ 0.127093] vdd3p0: supplied by regulator-dummy [ 0.128999] vdd2p5: supplied by regulator-dummy [ 0.130944] vddarm: supplied by regulator-dummy [ 0.133473] vddpu: supplied by regulator-dummy [ 0.134829] vddsoc: supplied by regulator-dummy [ 0.185065] No ATAGs? [ 0.185582] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.185672] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.196408] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.197605] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.214986] Serial: AMBA PL011 UART driver [ 0.314331] mxs-dma 110000.dma-apbh: initialized [ 0.322483] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.322522] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.322554] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.322583] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.322681] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.333332] vgaarb: loaded [ 0.336255] SCSI subsystem initialized [ 0.337775] usbcore: registered new interface driver usbfs [ 0.338027] usbcore: registered new interface driver hub [ 0.338207] usbcore: registered new device driver usb [ 0.342406] i2c i2c-0: IMX I2C adapter registered [ 0.342463] i2c i2c-0: can't use DMA, using PIO instead. [ 0.344387] i2c i2c-1: IMX I2C adapter registered [ 0.344447] i2c i2c-1: can't use DMA, using PIO instead. [ 0.346253] i2c i2c-2: IMX I2C adapter registered [ 0.346306] i2c i2c-2: can't use DMA, using PIO instead. [ 0.350205] pps_core: LinuxPPS API ver. 1 registered [ 0.350240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.350320] PTP clock support registered [ 0.351129] EDAC MC: Ver: 3.0.0 [ 0.362622] clocksource: Switched to clocksource mxc_timer1 [ 0.630750] NET: Registered protocol family 2 [ 0.631397] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.633921] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.634071] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.634304] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.635585] TCP: Hash tables configured (established 8192 bind 8192) [ 0.636138] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.636397] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.637079] NET: Registered protocol family 1 [ 0.639229] RPC: Registered named UNIX socket transport module. [ 0.639287] RPC: Registered udp transport module. [ 0.639315] RPC: Registered tcp transport module. [ 0.639342] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.641310] Trying to unpack rootfs image as initramfs... [ 2.499505] Freeing initrd memory: 15028K [ 2.500362] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.501826] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.509594] Initialise system trusted keyrings [ 2.510509] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 2.539334] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.542172] NFS: Registering the id_resolver key type [ 2.542423] Key type id_resolver registered [ 2.542478] Key type id_legacy registered [ 2.542689] ntfs: driver 2.1.32 [Flags: R/O]. [ 2.550702] Key type asymmetric registered [ 2.550797] Asymmetric key parser 'x509' registered [ 2.551137] bounce: pool size: 64 pages [ 2.551271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.551353] io scheduler noop registered [ 2.551388] io scheduler deadline registered [ 2.551884] io scheduler cfq registered (default) [ 2.551923] io scheduler mq-deadline registered [ 2.551954] io scheduler kyber registered [ 2.552668] test_firmware: interface ready [ 2.665789] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 2.666226] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 2.666471] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 2.667047] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 2.667649] PU : no governor for states [ 2.667721] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 2.690388] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.690629] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 2.876350] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.888730] SuperH (H)SCI(F) driver initialized [ 2.890868] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 3.850586] console [ttymxc0] enabled [ 3.857453] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 3.870023] msm_serial: driver initialized [ 3.875028] STMicroelectronics ASC driver initialized [ 3.885005] STM32 USART driver initialized [ 3.903998] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 3.957789] brd: module loaded [ 3.995674] loop: module loaded [ 4.008442] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 4.016543] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 4.024634] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 4.032899] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.044040] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.051058] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.059981] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.072941] scsi host0: ahci-imx [ 4.078044] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 4.120767] CAN device driver interface [ 4.128010] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.136916] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 4.147151] pps pps0: new PPS source ptp0 [ 4.198780] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.207788] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.213719] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.219879] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.226916] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.248353] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.255958] usbcore: registered new interface driver pegasus [ 4.261809] usbcore: registered new interface driver asix [ 4.267402] usbcore: registered new interface driver ax88179_178a [ 4.273677] usbcore: registered new interface driver cdc_ether [ 4.279684] usbcore: registered new interface driver smsc75xx [ 4.285664] usbcore: registered new interface driver smsc95xx [ 4.291567] usbcore: registered new interface driver net1080 [ 4.297414] usbcore: registered new interface driver cdc_subset [ 4.303528] usbcore: registered new interface driver zaurus [ 4.309320] usbcore: registered new interface driver cdc_ncm [ 4.323193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.329751] ehci-pci: EHCI PCI platform driver [ 4.334410] ehci-platform: EHCI generic platform driver [ 4.340400] ehci-orion: EHCI orion driver [ 4.345167] SPEAr-ehci: EHCI SPEAr driver [ 4.349827] ehci-st: EHCI STMicroelectronics driver [ 4.355406] ehci-exynos: EHCI EXYNOS driver [ 4.360236] ehci-atmel: EHCI Atmel driver [ 4.364944] tegra-ehci: Tegra EHCI driver [ 4.369619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.375937] ohci-pci: OHCI PCI platform driver [ 4.380530] ohci-platform: OHCI generic platform driver [ 4.386560] SPEAr-ohci: OHCI SPEAr driver [ 4.391218] ohci-st: OHCI STMicroelectronics driver [ 4.396796] ohci-atmel: OHCI Atmel driver [ 4.403461] usbcore: registered new interface driver usb-storage [ 4.415216] ata1: SATA link down (SStatus 0 SControl 300) [ 4.415929] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 4.420787] ahci-imx 2200000.sata: no device found, disabling link. [ 4.429283] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 4.435297] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.454048] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.459278] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.492445] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.502003] hub 1-0:1.0: USB hub found [ 4.506229] hub 1-0:1.0: 1 port detected [ 4.531862] i2c /dev entries driver [ 4.580523] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 4.601052] sdhci: Secure Digital Host Controller Interface driver [ 4.607332] sdhci: Copyright(c) Pierre Ossman [ 4.617576] Synopsys Designware Multimedia Card Interface Driver [ 4.629162] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.636721] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 4.677479] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 4.717741] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 4.726173] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 4.741870] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.757498] mmc0: new high speed SDHC card at address 1234 [ 4.764381] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 4.767662] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.785840] ledtrig-cpu: registered to indicate activity on CPUs [ 4.792484] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.794250] usbcore: registered new interface driver usbhid [ 4.804989] usbhid: USB HID core driver [ 4.827692] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 4.834923] IPv4 over IPsec tunneling driver [ 4.843018] NET: Registered protocol family 10 [ 4.851546] Segment Routing with IPv6 [ 4.857783] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.868672] NET: Registered protocol family 17 [ 4.873609] can: controller area network core (rev 20170425 abi 9) [ 4.880139] NET: Registered protocol family 29 [ 4.884830] can: raw protocol (rev 20170425) [ 4.889377] can: broadcast manager protocol (rev 20170425 t) [ 4.895291] can: netlink gateway (rev 20170425) max_hops=1 [ 4.901925] 8021q: 802.1Q VLAN Support v1.8 [ 4.907197] Key type dns_resolver registered [ 4.918304] mmc2: new DDR MMC card at address 0001 [ 4.920424] cpu cpu0: Linked as a consumer to regulator.4 [ 4.928889] cpu cpu0: Linked as a consumer to regulator.5 [ 4.931677] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 4.934731] cpu cpu0: Linked as a consumer to regulator.6 [ 4.941263] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 4.949626] ThumbEE CPU extension supported. [ 4.954032] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 4.954882] Registering SWP/SWPB emulation handler [ 4.961525] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 4.968046] Loading compiled-in X.509 certificates [ 4.978846] mmcblk2: p1 p2 [ 5.036328] hub 1-1:1.0: USB hub found [ 5.041298] hub 1-1:1.0: 4 ports detected [ 5.073656] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 5.097168] hctosys: unable to open rtc device (rtc0) [ 5.152587] Freeing unused kernel memory: 2048K [ 5.183701] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.558419] udevd[111]: starting version 3.2.9 [ 5.566217] random: udevd: uninitialized urandom read (16 bytes read) [ 5.573491] random: udevd: uninitialized urandom read (16 bytes read) [ 5.580106] random: udevd: uninitialized urandom read (16 bytes read) [ 5.598636] udevd[111]: specified user 'tss' unknown [ 5.604522] udevd[111]: specified group 'tss' unknown [ 5.616706] udevd[112]: starting eudev-3.2.9 [ 6.587102] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.595604] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.603490] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 6.610093] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.638533] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.666022] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.672186] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.691561] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 [ 6.903943] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 6.910418] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 6.931008] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.980395] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: [ 7.581742] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 7.874709] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-921682/environment . /lava-921682/environment / # /lava-921682/bin/lava-test-runner /lava-921682/0 /lava-921682/bin/lava-test-runner /lava-921682/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-921682/0/tests/0_dmesg + cat uuid + UUID=921682_1.5.2.3.1[ 8.609409] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.723470] [ 8.823506] [ 8.921657] + set +x [ 8.933441] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-921682/environment / # . /lava-921682/environment/lava-921682/bin/lava-test-runner /lava-921682/1 / # /lava-921682/bin/lava-test-runner /lava-921682/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-921682/1/tests/1_bootrr + cat uuid + UUID=921682_1.5.2.3.5[ 9.540809] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-921682/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-921682/1/../bin/lava-test-case [ 10.721757] /lava-921682/1/../bin/lava-test-case [ 10.831003] /lava-921682/1/../bin/lava-test-case [ 10.886574] + set +x [ 10.927198] / #