connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/926355/tftp-deploy-zkj_fcwy/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/926355/tftp-deploy-zkj_fcwy/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/926355/tftp-deploy-zkj_fcwy/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/926355/tftp-deploy-zkj_fcwy/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/926355/tftp-deploy-zkj_fcwy/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/926355/tftp-deploy-zkj_fcwy/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 6e:c8:5f:e6:0b:0b T eth0: DHCP client bound to address 10.8.254.21 Loading ARM Linux zImage '/mnt/tftp/926355/tftp-deploy-zkj_fcwy/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x131b6000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/926355/tftp-deploy-zkj_fcwy/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18ea53b5 Loading devicetree from '/mnt/tftp/926355/tftp-deploy-zkj_fcwy/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x131b6000, initrd at 0x18000000, oftree at 0x18ea6000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.280-cip96 (KernelCI@build-j1346709-arm-gcc-10-multi-v7-defconfig-kselftest-vr5cs) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Apr 14 09:46:15 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s40104 r8192 d21336 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1963896K/2097152K available (15360K kernel code, 1762K rwdata, 6312K rodata, 2048K init, 7700K bss, 67720K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1763 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7701 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 49054 entries in 192 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000040] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003603] Console: colour dummy device 80x30 [ 0.003655] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003679] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003702] ... MAX_LOCK_DEPTH: 48 [ 0.003725] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003748] ... CLASSHASH_SIZE: 4096 [ 0.003770] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003792] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003813] ... CHAINHASH_SIZE: 32768 [ 0.003836] memory used by lock dependency info: 4655 kB [ 0.003859] per task-struct memory footprint: 1536 bytes [ 0.003943] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003980] pid_max: default: 32768 minimum: 301 [ 0.004324] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004369] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006432] CPU: Testing write buffer coherency: ok [ 0.006517] CPU0: Spectre v2: using BPIALL workaround [ 0.007683] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010157] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.012428] rcu: Hierarchical SRCU implementation. [ 0.016768] EFI services will not be available. [ 0.017759] smp: Bringing up secondary CPUs ... [ 0.020280] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020295] CPU1: Spectre v2: using BPIALL workaround [ 0.023225] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023238] CPU2: Spectre v2: using BPIALL workaround [ 0.025816] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025827] CPU3: Spectre v2: using BPIALL workaround [ 0.026271] smp: Brought up 1 node, 4 CPUs [ 0.026304] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026329] CPU: All CPU(s) started in SVC mode. [ 0.028967] devtmpfs: initialized [ 0.060768] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.063339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.063402] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.067537] pinctrl core: initialized pinctrl subsystem [ 0.072621] DMI not present or invalid. [ 0.074588] NET: Registered protocol family 16 [ 0.082687] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.089163] cpuidle: using governor menu [ 0.089625] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.119206] vdd1p1: supplied by regulator-dummy [ 0.121246] vdd3p0: supplied by regulator-dummy [ 0.123074] vdd2p5: supplied by regulator-dummy [ 0.124870] vddarm: supplied by regulator-dummy [ 0.127300] vddpu: supplied by regulator-dummy [ 0.128615] vddsoc: supplied by regulator-dummy [ 0.177699] No ATAGs? [ 0.178195] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.178285] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.188795] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.190024] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.206983] Serial: AMBA PL011 UART driver [ 0.302345] mxs-dma 110000.dma-apbh: initialized [ 0.310254] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.310292] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.310326] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.310353] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.310449] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.320880] vgaarb: loaded [ 0.323723] SCSI subsystem initialized [ 0.325208] usbcore: registered new interface driver usbfs [ 0.325434] usbcore: registered new interface driver hub [ 0.325614] usbcore: registered new device driver usb [ 0.329679] i2c i2c-0: IMX I2C adapter registered [ 0.329740] i2c i2c-0: can't use DMA, using PIO instead. [ 0.331633] i2c i2c-1: IMX I2C adapter registered [ 0.331688] i2c i2c-1: can't use DMA, using PIO instead. [ 0.333451] i2c i2c-2: IMX I2C adapter registered [ 0.333502] i2c i2c-2: can't use DMA, using PIO instead. [ 0.337246] pps_core: LinuxPPS API ver. 1 registered [ 0.337276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.337349] PTP clock support registered [ 0.338123] EDAC MC: Ver: 3.0.0 [ 0.348815] clocksource: Switched to clocksource mxc_timer1 [ 0.609272] NET: Registered protocol family 2 [ 0.609875] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.612752] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.612900] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.613114] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.614391] TCP: Hash tables configured (established 8192 bind 8192) [ 0.614933] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.615170] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.615827] NET: Registered protocol family 1 [ 0.617871] RPC: Registered named UNIX socket transport module. [ 0.617924] RPC: Registered udp transport module. [ 0.617953] RPC: Registered tcp transport module. [ 0.617979] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.620072] Trying to unpack rootfs image as initramfs... [ 2.434069] Freeing initrd memory: 15000K [ 2.434770] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.436833] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.444429] Initialise system trusted keyrings [ 2.445569] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 2.472882] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.475505] NFS: Registering the id_resolver key type [ 2.475676] Key type id_resolver registered [ 2.475738] Key type id_legacy registered [ 2.475924] ntfs: driver 2.1.32 [Flags: R/O]. [ 2.483536] Key type asymmetric registered [ 2.483629] Asymmetric key parser 'x509' registered [ 2.483933] bounce: pool size: 64 pages [ 2.484068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.484146] io scheduler noop registered [ 2.484178] io scheduler deadline registered [ 2.484661] io scheduler cfq registered (default) [ 2.484700] io scheduler mq-deadline registered [ 2.484730] io scheduler kyber registered [ 2.485352] test_firmware: interface ready [ 2.595443] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 2.595872] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 2.596110] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 2.596598] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 2.597160] PU : no governor for states [ 2.597235] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 2.619558] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.619756] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 2.808304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.820679] SuperH (H)SCI(F) driver initialized [ 2.822770] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 3.781954] console [ttymxc0] enabled [ 3.788429] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 3.800989] msm_serial: driver initialized [ 3.805864] STMicroelectronics ASC driver initialized [ 3.815725] STM32 USART driver initialized [ 3.834382] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 3.886111] brd: module loaded [ 3.922925] loop: module loaded [ 3.935514] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 3.943561] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 3.951658] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 3.959911] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 3.971040] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.978056] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.986956] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.999694] scsi host0: ahci-imx [ 4.004709] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 4.046721] CAN device driver interface [ 4.053868] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.062681] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 4.072820] pps pps0: new PPS source ptp0 [ 4.123067] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.132017] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.137878] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.144052] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.151087] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.172190] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.179784] usbcore: registered new interface driver pegasus [ 4.185642] usbcore: registered new interface driver asix [ 4.191243] usbcore: registered new interface driver ax88179_178a [ 4.197463] usbcore: registered new interface driver cdc_ether [ 4.203515] usbcore: registered new interface driver smsc75xx [ 4.209480] usbcore: registered new interface driver smsc95xx [ 4.215348] usbcore: registered new interface driver net1080 [ 4.221201] usbcore: registered new interface driver cdc_subset [ 4.227244] usbcore: registered new interface driver zaurus [ 4.233074] usbcore: registered new interface driver cdc_ncm [ 4.246783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.253398] ehci-pci: EHCI PCI platform driver [ 4.257987] ehci-platform: EHCI generic platform driver [ 4.264041] ehci-orion: EHCI orion driver [ 4.268777] SPEAr-ehci: EHCI SPEAr driver [ 4.273425] ehci-st: EHCI STMicroelectronics driver [ 4.278999] ehci-exynos: EHCI EXYNOS driver [ 4.283829] ehci-atmel: EHCI Atmel driver [ 4.288467] tegra-ehci: Tegra EHCI driver [ 4.293195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.299508] ohci-pci: OHCI PCI platform driver [ 4.304095] ohci-platform: OHCI generic platform driver [ 4.310088] SPEAr-ohci: OHCI SPEAr driver [ 4.314737] ohci-st: OHCI STMicroelectronics driver [ 4.320318] ohci-atmel: OHCI Atmel driver [ 4.326840] usbcore: registered new interface driver usb-storage [ 4.339247] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 4.341278] ata1: SATA link down (SStatus 0 SControl 300) [ 4.347808] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 4.353042] ahci-imx 2200000.sata: no device found, disabling link. [ 4.364626] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.365653] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.378089] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.408822] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.418217] hub 1-0:1.0: USB hub found [ 4.422409] hub 1-0:1.0: 1 port detected [ 4.447433] i2c /dev entries driver [ 4.495700] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 4.515929] sdhci: Secure Digital Host Controller Interface driver [ 4.522203] sdhci: Copyright(c) Pierre Ossman [ 4.532358] Synopsys Designware Multimedia Card Interface Driver [ 4.543823] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.551320] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 4.591952] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 4.632280] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 4.640757] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 4.657387] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.671999] mmc0: new high speed SDHC card at address 1234 [ 4.679879] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 4.681955] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.701424] ledtrig-cpu: registered to indicate activity on CPUs [ 4.708862] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.709882] usbcore: registered new interface driver usbhid [ 4.721053] usbhid: USB HID core driver [ 4.741856] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 4.748978] IPv4 over IPsec tunneling driver [ 4.756811] NET: Registered protocol family 10 [ 4.766012] Segment Routing with IPv6 [ 4.772141] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.782206] NET: Registered protocol family 17 [ 4.787005] can: controller area network core (rev 20170425 abi 9) [ 4.793586] NET: Registered protocol family 29 [ 4.798075] can: raw protocol (rev 20170425) [ 4.802544] can: broadcast manager protocol (rev 20170425 t) [ 4.808263] can: netlink gateway (rev 20170425) max_hops=1 [ 4.814544] 8021q: 802.1Q VLAN Support v1.8 [ 4.819601] Key type dns_resolver registered [ 4.830281] ------------[ cut here ]------------ [ 4.833524] cpu cpu0: Linked as a consumer to regulator.4 [ 4.834928] WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x138/0x1f0 [ 4.834937] Modules linked in: [ 4.840698] cpu cpu0: Linked as a consumer to regulator.5 [ 4.848870] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.280-cip96 #1 [ 4.848876] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.848881] Backtrace: [ 4.848902] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 4.848912] r7:ffffffff r6:00000000 r5:60000093 r4:c1c9d66c [ 4.848933] [] (show_stack) from [] (dump_stack+0xe0/0x10c) [ 4.852267] cpu cpu0: Linked as a consumer to regulator.6 [ 4.857384] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) [ 4.857396] r9:60000093 r8:c1b084bc r7:00000000 r6:00000009 r5:00000000 r4:00000000 [ 4.858754] ------------[ cut here ]------------ [ 4.858775] WARNING: CPU: 1 PID: 0 at include/trace/events/lock.h:58 lock_release+0x364/0x370 [ 4.858781] Modules linked in: [ 4.868877] ThumbEE CPU extension supported. [ 4.870542] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) [ 4.870550] r6:c03b8c3c r5:0000000d r4:c16816b0 [ 4.873032] Registering SWP/SWPB emulation handler [ 4.880577] [] (warn_slowpath_null) from [] (lock_acquire+0x138/0x1f0) [ 4.880584] r6:00000000 r5:00000000 r4:c1b05990 [ 4.880602] [] (lock_acquire) from [] (_raw_spin_lock+0x58/0x68) [ 4.880612] r10:eef9c2f8 r9:eef9c2f8 r8:00000001 r7:eefa0740 r6:00000001 r5:c23e9aec [ 4.880617] r4:c1b05980 [ 4.880635] [] (_raw_spin_lock) from [] (__tick_broadcast_oneshot_control+0x4c/0x2ac) [ 4.880642] r4:c1b01e88 [ 4.995436] [] (__tick_broadcast_oneshot_control) from [] (tick_broadcast_oneshot_control+0x3c/0x40) [ 5.006335] r9:eef9c2f8 r8:00000001 r7:c1b10e94 r6:c1b10ea4 r5:c1b10e44 r4:00000001 [ 5.014113] [] (tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x50/0x520) [ 5.023970] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) [ 5.032262] r10:eef9c2f8 r9:c1b10e44 r8:c1aa22f0 r7:c1b08500 r6:c1b10e44 r5:eef9c2f8 [ 5.040107] r4:00000001 [ 5.042682] [] (cpuidle_enter) from [] (do_idle+0x20c/0x2f8) [ 5.050101] r7:c1b08500 r6:c1b084bc r5:00000000 r4:c1b00000 [ 5.055796] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) [ 5.063392] r10:c19e4a50 r9:00000001 r8:efffcb00 r7:c1b08480 r6:00000002 r5:c1b01f78 [ 5.071236] r4:000000cb [ 5.073807] [] (cpu_startup_entry) from [] (rest_init+0x2c8/0x2e0) [ 5.081762] [] (rest_init) from [] (start_kernel+0x46c/0x4a8) [ 5.089266] r6:ffffffff r5:00000001 r4:c1cb9058 [ 5.093908] [] (start_kernel) from [<00000000>] ( (null)) [ 5.100291] r10:10c5387d r9:412fc09a r8:18ea6000 r7:00000000 r6:10c0387d r5:00000051 [ 5.108136] r4:c19004b0 [ 5.110687] irq event stamp: 13936 [ 5.110702] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.280-cip96 #1 [ 5.110715] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 5.114135] hardirqs last enabled at (13935): [] _raw_read_unlock_irqrestore+0x64/0x6c [ 5.114162] hardirqs last disabled at (13936): [] do_idle+0xb0/0x2f8 [ 5.120769] Backtrace: [ 5.127319] softirqs last enabled at (13928): [] __do_softirq+0x344/0x520 [ 5.136200] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 5.143431] softirqs last disabled at (13915): [] irq_exit+0x170/0x1c8 [ 5.145867] r7:ffffffff r6:00000000 r5:60000093 r4:c1c9d66c [ 5.153610] ---[ end trace c37504a932a9a7f9 ]--- [ 5.161205] [] (show_stack) from [] (dump_stack+0xe0/0x10c) [ 5.186195] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) [ 5.193704] r9:c03ff708 r8:00000001 r7:60000093 r6:00000009 r5:00000000 r4:00000000 [ 5.201475] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) [ 5.209673] r6:c03b8af8 r5:0000003a r4:c16816b0 [ 5.214323] [] (warn_slowpath_null) from [] (lock_release+0x364/0x370) [ 5.222608] r6:c1b456c4 r5:c1b456c4 r4:c1b084bc [ 5.227258] [] (lock_release) from [] (ktime_get+0x84/0x1ac) [ 5.234680] r10:00000001 r9:60000093 r8:00000001 r7:c1b45700 r6:c1b456c4 r5:c03ff708 [ 5.242526] r4:c1b45600 [ 5.245089] [] (ktime_get) from [] (clockevents_program_event+0x6c/0x184) [ 5.253639] r10:eefad2f8 r9:c23e9b00 r8:00000001 r7:21adb700 r6:00000001 r5:00000001 [ 5.261485] r4:ee029c40 [ 5.264046] [] (clockevents_program_event) from [] (tick_broadcast_set_event+0x54/0xb4) [ 5.273809] r7:21adb700 r6:00000001 r5:00000001 r4:ee029c40 [ 5.279499] [] (tick_broadcast_set_event) from [] (__tick_broadcast_oneshot_control+0x140/0x2ac) [ 5.290042] r7:eefb1740 r6:ee029c40 r5:00000000 r4:00000001 [ 5.295730] [] (__tick_broadcast_oneshot_control) from [] (tick_broadcast_oneshot_control+0x3c/0x40) [ 5.306623] r9:eefad2f8 r8:00000001 r7:c1b10e94 r6:c1b10ea4 r5:c1b10e44 r4:00000001 [ 5.314397] [] (tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x50/0x520) [ 5.324249] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) [ 5.332539] r10:eefad2f8 r9:c1b10e44 r8:c1aa22f0 r7:c1b08500 r6:c1b10e44 r5:eefad2f8 [ 5.340384] r4:00000001 [ 5.342952] [] (cpuidle_enter) from [] (do_idle+0x20c/0x2f8) [ 5.350372] r7:c1b08500 r6:c1b084bc r5:00000001 r4:ee1dc000 [ 5.356063] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) [ 5.363658] r10:00000000 r9:412fc09a r8:1020406a r7:c1cb9650 r6:00000001 r5:ee1dc000 [ 5.371503] r4:0000008a [ 5.374075] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x170/0x17c) [ 5.383152] [] (secondary_start_kernel) from [<1030312c>] (0x1030312c) [ 5.390572] r7:c1cb9650 r6:10c0387d r5:00000051 r4:3e1c806a [ 5.396248] irq event stamp: 15268 [ 5.399681] hardirqs last enabled at (15267): [] _raw_read_unlock_irqrestore+0x64/0x6c [ 5.408581] hardirqs last disabled at (15268): [] do_idle+0xb0/0x2f8 [ 5.415828] softirqs last enabled at (15260): [] __do_softirq+0x344/0x520 [ 5.423600] softirqs last disabled at (15249): [] irq_exit+0x170/0x1c8 [ 5.431011] ---[ end trace c37504a932a9a7fa ]--- [ 5.439010] Loading compiled-in X.509 certificates [ 5.492600] hub 1-1:1.0: USB hub found [ 5.497479] hub 1-1:1.0: 4 ports detected [ 5.534848] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 5.559393] hctosys: unable to open rtc device (rtc0) [ 5.617361] Freeing unused kernel memory: 2048K [ 5.649805] mmc2: new DDR MMC card at address 0001 [ 5.658081] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 5.664963] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 5.673126] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 5.680320] Run /init as init process [ 5.684931] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 5.696053] mmcblk2: p1 p2 Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.044038] udevd[111]: starting version 3.2.9 [ 6.051235] random: udevd: uninitialized urandom read (16 bytes read) [ 6.058622] random: udevd: uninitialized urandom read (16 bytes read) [ 6.065407] random: udevd: uninitialized urandom read (16 bytes read) [ 6.083779] udevd[111]: specified user 'tss' unknown [ 6.089032] udevd[111]: specified group 'tss' unknown [ 6.100869] udevd[112]: starting eudev-3.2.9 [ 7.031843] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 7.042126] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 7.053000] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 7.059743] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 7.099492] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 7.123866] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 7.130141] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 7.147289] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 [ 7.343068] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 7.349648] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 7.365162] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.388055] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: [ 8.010671] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 8.279874] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-926355/environment . /lava-926355/environment / # /lava-926355/bin/lava-test-runner /lava-926355/0 /lava-926355/bin/lava-test-runner /lava-926355/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-926355/0/tests/0_dmesg + cat uuid + UUID=926355_1.5.2.3.1[ 8.995690] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 9.108477] [ 9.209145] [ 9.306068] + set +x [ 9.317410] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-926355/environment / # . /lava-926355/environment/lava-926355/bin/lava-test-runner /lava-926355/1 / # /lava-926355/bin/lava-test-runner /lava-926355/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-926355/1/tests/1_bootrr + cat uuid + UUID=926355_1.5.2.3.5[ 9.925683] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-926355/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-926355/1/../bin/lava-test-case [ 11.105037] /lava-926355/1/../bin/lava-test-case [ 11.209737] /lava-926355/1/../bin/lava-test-case [ 11.268415] + set +x[ 11.307553] / #