Trying 192.168.56.184... Connected to conserv2. Escape character is '^]'. ser2net port telnet,3006 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1.3.4:1.0-port0, 115200n81, [] (Debian GNU/Linux) U-Boot SPL 2022.04-00708-g42a2d90cf5-dirty (Apr 30 2022 - 01:31:21 +0100) Trying to boot from MMC1 U-Boot 2022.04-00708-g42a2d90cf5-dirty (Apr 30 2022 - 01:31:21 +0100) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 152 devices, 15 uclasses, devicetree: separate U-Boot SPL 2022.04-00708-g42a2d90cf5-dirty (Apr 30 2022 - 01:31:21 +0100) Trying to boot from MMC1 U-Boot 2022.04-00708-g42a2d90cf5-dirty (Apr 30 2022 - 01:31:21 +0100) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 152 devices, 15 uclasses, devicetree: separate WDT: Started wdt@44e35000 U-Boot SPL 2022.04-00708-g42a2d90cf5-dirty (Apr 30 2022 - 01:31:21 +0100) Trying to boot from MMC1 U-Boot 2022.04-00708-g42a2d90cf5-dirty (Apr 30 2022 - 01:31:21 +0100) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 152 devices, 15 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.120 (3814 ms) => setenv serverip 192.168.56.75 setenv serverip 192.168.56.75 => tftp 0x82000000 719030/tftp-deploy-l6ip3ggs/kernel/zImage tftp 0x82000000 719030/tftp-deploy-l6ip3ggs/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.75; our IP address is 192.168.56.120 Filename '719030/tftp-deploy-l6ip3ggs/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.3 MiB 5.6 MiB/s done Bytes transferred = 4509568 (44cf80 hex) => tftp 0x83000000 719030/tftp-deploy-l6ip3ggs/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 719030/tftp-deploy-l6ip3ggs/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.75; our IP address is 192.168.56.120 Filename '719030/tftp-deploy-l6ip3ggs/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 12.1 MiB 5.5 MiB/s done Bytes transferred = 12669550 (c1526e hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 719030/tftp-deploy-l6ip3ggs/dtb/am335x-boneblack.dtb tftp 0x88000000 719030/tftp-deploy-l6ip3ggs/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.75; our IP address is 192.168.56.120 Filename '719030/tftp-deploy-l6ip3ggs/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 34.1 KiB 3.7 MiB/s done Bytes transferred = 34893 (884d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44cf80 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-07-14 15:14:25 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12669486 Bytes = 12.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b84c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.288-cip101 (KernelCI@build-j2070-arm-gcc-10-omap2plus-defconfig-jjs4m) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Jul 14 14:56:31 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s38632 r8192 d22808 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 466604K/522240K available (9216K kernel code, 794K rwdata, 2600K rodata, 1024K init, 7477K bss, 39252K reserved, 16384K cma-reserved, 0K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 795 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7478 kB) <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz <6>[ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008367] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018167] OMAP clocksource: timer1 at 24000000 Hz <2>[ 0.023945] timer_probe: no matching timers found <6>[ 0.030371] Console: colour dummy device 80x30 <3>[ 0.035270] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042318] This ensures that you still see kernel messages. Please <3>[ 0.049069] update your kernel commandline. <4>[ 0.053647] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.061914] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.066401] ... MAX_LOCK_DEPTH: 48 <4>[ 0.071002] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.075758] ... CLASSHASH_SIZE: 4096 <4>[ 0.080537] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.085381] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.090249] ... CHAINHASH_SIZE: 32768 <4>[ 0.095094] memory used by lock dependency info: 4655 kB <4>[ 0.100946] per task-struct memory footprint: 1536 bytes <6>[ 0.106820] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.145366] pid_max: default: 32768 minimum: 301 <6>[ 0.150836] Security Framework initialized <6>[ 0.155447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.162589] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.173381] CPU: Testing write buffer coherency: ok <6>[ 0.178928] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.186043] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.194136] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.201915] rcu: Hierarchical SRCU implementation. <6>[ 0.208752] smp: Bringing up secondary CPUs ... <6>[ 0.213699] smp: Brought up 1 node, 1 CPU <6>[ 0.218099] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.224869] CPU: All CPU(s) started in SVC mode. <6>[ 0.233868] devtmpfs: initialized <6>[ 0.261905] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.270925] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.281455] futex hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.289775] pinctrl core: initialized pinctrl subsystem <6>[ 0.300938] NET: Registered protocol family 16 <6>[ 0.312419] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.380639] l4_wkup_cm:clk:0010:0: failed to disable <6>[ 0.440318] audit: initializing netlink subsys (disabled) <6>[ 0.449403] cpuidle: using governor menu <5>[ 0.466955] audit: type=2000 audit(0.410:1): state=initialized audit_enabled=0 res=1 <6>[ 0.476712] OMAP GPIO hardware version 0.1 <6>[ 0.505960] No ATAGs? <6>[ 0.505975] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.550860] edma 49000000.edma: TI EDMA DMA engine driver <6>[ 0.563161] vgaarb: loaded <5>[ 0.567259] SCSI subsystem initialized <6>[ 0.573990] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.579517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.589289] PTP clock support registered <6>[ 0.597528] clocksource: Switched to clocksource timer1 <5>[ 0.755288] VFS: Disk quotas dquot_6.6.0 <6>[ 0.759961] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.793519] NET: Registered protocol family 2 <6>[ 0.799123] IP idents hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.808270] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) <6>[ 0.816616] TCP established hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.824319] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) <6>[ 0.831906] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.839189] UDP hash table entries: 256 (order: 2, 20480 bytes) <6>[ 0.845650] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) <6>[ 0.853069] NET: Registered protocol family 1 <6>[ 0.860804] RPC: Registered named UNIX socket transport module. <6>[ 0.867232] RPC: Registered udp transport module. <6>[ 0.872537] RPC: Registered tcp transport module. <6>[ 0.877724] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.886562] Trying to unpack rootfs image as initramfs... <6>[ 2.074449] Freeing initrd memory: 12376K <6>[ 2.081200] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.095465] Initialise system trusted keyrings <6>[ 2.101746] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.112004] NFS: Registering the id_resolver key type <5>[ 2.118043] Key type id_resolver registered <5>[ 2.122676] Key type id_legacy registered <6>[ 2.127272] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.143180] Key type asymmetric registered <5>[ 2.148150] Asymmetric key parser 'x509' registered <6>[ 2.153614] io scheduler noop registered <6>[ 2.158033] io scheduler deadline registered <6>[ 2.162881] io scheduler cfq registered (default) <6>[ 2.168075] io scheduler mq-deadline registered <6>[ 2.173016] io scheduler kyber registered <6>[ 2.180236] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 2.194715] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 2.214494] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 <6>[ 2.224615] console [ttyS0] enabled <6>[ 2.224615] console [ttyS0] enabled <6>[ 2.232408] bootconsole [omap8250] disabled <6>[ 2.232408] bootconsole [omap8250] disabled <6>[ 2.272764] brd: module loaded <6>[ 2.302367] loop: module loaded <3>[ 2.308615] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 2.387530] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.395551] davinci_mdio 4a101000.mdio: detected phy mask fffffffe <6>[ 2.437940] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 2.448896] cpsw 4a100000.ethernet: Detected MACID = c8:a0:30:ab:e7:47 <6>[ 2.456582] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 2.463494] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 2.469173] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 2.480042] i2c /dev entries driver <6>[ 2.487808] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.494311] sdhci: Copyright(c) Pierre Ossman <6>[ 2.500441] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 2.510024] omap_hsmmc 48060000.mmc: Got CD GPIO <6>[ 2.516760] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 <6>[ 2.554074] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 <6>[ 2.586198] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.593388] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.602824] oprofile: using arm/armv7 <6>[ 2.607847] Initializing XFRM netlink socket <6>[ 2.613090] NET: Registered protocol family 10 <6>[ 2.623617] Segment Routing with IPv6 <6>[ 2.627980] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.636114] NET: Registered protocol family 17 <6>[ 2.641089] NET: Registered protocol family 15 <5>[ 2.646231] Key type dns_resolver registered <6>[ 2.651022] ThumbEE CPU extension supported. <5>[ 2.655612] Registering SWP/SWPB emulation handler <3>[ 2.660787] omap_voltage_late_init: Voltage driver support not added <3>[ 2.667510] sr_dev_init: Unknown instance smartreflex0 <6>[ 2.673396] SmartReflex Class3 initialized <5>[ 2.681788] Loading compiled-in X.509 certificates <4>[ 2.734461] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.743554] mmc0: new SD card at address e624 <6>[ 2.755458] mmcblk0: mmc0:e624 SU512 484 MiB <6>[ 2.772511] mmcblk0: p1 <6>[ 2.801928] mmc1: new high speed MMC card at address 0001 <6>[ 2.810824] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <6>[ 2.817219] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB <6>[ 2.825208] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB <6>[ 2.834259] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (248:0) <6>[ 2.846264] mmcblk1: p1 p2 <6>[ 2.866190] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 2.873057] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 2.883198] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 2.891134] hctosys: unable to open rtc device (rtc0) <4>[ 2.896511] sr_init: No PMIC hook to init smartreflex <6>[ 2.920745] net eth0: initializing cpsw version 1.12 (0) <6>[ 3.028812] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 3.052118] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 5.158888] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.187615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.217459] Sending DHCP requests ..., OK <6>[ 11.361808] IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.120 <6>[ 11.370312] IP-Config: Complete: <6>[ 11.373834] device=eth0, hwaddr=c8:a0:30:ab:e7:47, ipaddr=192.168.56.120, mask=255.255.255.0, gw=192.168.56.254 <6>[ 11.384738] host=192.168.56.120, domain=mayfield.sirena.org.uk, nis-domain=(none) <6>[ 11.393011] bootserver=192.168.56.254, rootserver=192.168.56.254, rootpath= <6>[ 11.393018] nameserver0=192.168.56.254 <6>[ 11.405268] ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <6>[ 11.418395] Freeing unused kernel memory: 1024K <6>[ 11.428291] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 11.877320] udevd[87]: starting version 3.2.9 <5>[ 11.885382] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 11.894703] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 11.902010] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 11.922829] udevd[87]: specified user 'tss' unknown <27>[ 11.928810] udevd[87]: specified group 'tss' unknown <30>[ 11.945401] udevd[88]: starting eudev-3.2.9 <6>[ 12.657217] cpu cpu0: Linked as a consumer to regulator.3 <6>[ 12.698754] cpu cpu0: Dropping the link to regulator.3 <6>[ 12.761108] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 12.788552] cpu cpu0: Linked as a consumer to regulator.3 <6>[ 12.816425] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 12.865723] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 12.973005] input: tps65217_pwrbutton as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <6>[ 13.008494] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 13.059586] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 13.343859] tda998x 0-0070: found TDA19988 <6>[ 13.368099] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 13.376085] random: crng init done <6>[ 13.416787] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops [tda998x]) <6>[ 13.424498] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 13.431562] [drm] No driver support for vblank timestamp query. <6>[ 13.588951] [drm] Cannot find any crtc or sizes <6>[ 13.661367] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 13.997772] remoteproc remoteproc0: wkup_m3 is available <6>[ 14.067024] remoteproc remoteproc0: powering up wkup_m3 <4>[ 14.095824] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 14.106606] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 14.113076] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <4>[ 14.319100] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator <6>[ 14.329865] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 <6>[ 14.375224] usbcore: registered new interface driver usbfs <6>[ 14.381940] usbcore: registered new interface driver hub <6>[ 14.387955] usbcore: registered new device driver usb <4>[ 14.515322] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator <6>[ 14.526177] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 <6>[ 14.623651] [drm] Cannot find any crtc or sizes <3>[ 14.662350] pm33xx pm33xx: PM: Unable to allocate memory from ocmcram <4>[ 14.669544] pm33xx: probe of pm33xx failed with error -12 <6>[ 14.683744] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 14.690774] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 14.841769] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 <6>[ 14.850911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.858544] usb usb1: Product: MUSB HDRC host driver <6>[ 14.863808] usb usb1: Manufacturer: Linux 4.19.288-cip101 musb-hcd <6>[ 14.870340] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 15.005187] hub 1-0:1.0: USB hub found <6>[ 15.030858] hub 1-0:1.0: 1 port detected <6>[ 15.099196] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-719030/environment . /lava-719030/environment / # /lava-719030/bin/lava-test-runner /lava-719030/0 /lava-719030/bin/lava-test-runner /lava-719030/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-719030/0/tests/0_dmesg + cat uuid + UUID=719030_1.5.2.4.1 <8>[ 16.434722] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : timer_probe: no matching timers found <8>[ 16.550794] <8>[ 16.655134] <8>[ 16.758058] + set +x<8>[ 16.771214] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-719030/environment / # . /lava-719030/environment/lava-719030/bin/lava-test-runner /lava-719030/1 / # /lava-719030/bin/lava-test-runner /lava-719030/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-719030/1/tests/1_bootrr + cat uuid + UUID=719030_1.5.2.4.5 <8>[ 17.402601] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-719030/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-719030/1/../bin/lava-test-case <8>[ 17.540787] /lava-719030/1/../bin/lava-test-case <8>[ 17.638852] /lava-719030/1/../bin/lava-test-case <8>[ 17.692508] /lava-719030/1/../bin/lava-test-case <8>[ 17.804876] /lava-719030/1/../bin/lava-test-case <8>[ 17.894532] /lava-719030/1/../bin/lava-test-case <8>[ 17.964181] /lava-719030/1/../bin/lava-test-case <8>[ 18.052345] /lava-719030/1/../bin/lava-test-case <8>[ 18.140919] /lava-719030/1/../bin/lava-test-case <8>[ 18.210399] /lava-719030/1/../bin/lava-test-case <8>[ 18.298532] /lava-719030/1/../bin/lava-test-case <8>[ 18.368523] /lava-719030/1/../bin/lava-test-case <8>[ 18.491413] /lava-719030/1/../bin/lava-test-case <8>[ 18.559975] /lava-719030/1/../bin/lava-test-case <8>[ 18.613416] /lava-719030/1/../bin/lava-test-case <8>[ 18.684491] /lava-719030/1/../bin/lava-test-case <8>[ 18.771686] /lava-719030/1/../bin/lava-test-case <8>[ 18.843053] /lava-719030/1/../bin/lava-test-case <8>[ 19.974492] /lava-719030/1/../bin/lava-test-case <8>[ 21.108121] /lava-719030/1/../bin/lava-test-case <8>[ 21.178503] /lava-719030/1/../bin/lava-test-case <8>[ 21.266287] /lava-719030/1/../bin/lava-test-case <8>[ 21.355048] /lava-719030/1/../bin/lava-test-case <8>[ 21.426487] /lava-719030/1/../bin/lava-test-case <8>[ 21.515824] /lava-719030/1/../bin/lava-test-case <8>[ 21.586055] /lava-719030/1/../bin/lava-test-case <8>[ 21.674106] /lava-719030/1/../bin/lava-test-case <8>[ 22.785299] /lava-719030/1/../bin/lava-test-case <8>[ 23.906825] /lava-719030/1/../bin/lava-test-case <8>[ 25.023315] /lava-719030/1/../bin/lava-test-case <8>[ 26.129493] /lava-719030/1/../bin/lava-test-case <8>[ 26.200319] /lava-719030/1/../bin/lava-test-case <8>[ 26.288438] /lava-719030/1/../bin/lava-test-case <8>[ 27.403514] /lava-719030/1/../bin/lava-test-case <8>[ 28.515922] /lava-719030/1/../bin/lava-test-case <8>[ 28.585758] /lava-719030/1/../bin/lava-test-case <8>[ 28.673827] /lava-719030/1/../bin/lava-test-case <8>[ 29.785483] /lava-719030/1/../bin/lava-test-case <8>[ 30.902789] /lava-719030/1/../bin/lava-test-case <8>[ 30.973164] /lava-719030/1/../bin/lava-test-case <8>[ 31.062348] /lava-719030/1/../bin/lava-test-case <8>[ 31.132102] /lava-719030/1/../bin/lava-test-case <8>[ 31.221506] /lava-719030/1/../bin/lava-test-case <8>[ 31.292014] /lava-719030/1/../bin/lava-test-case <8>[ 31.380589] /lava-719030/1/../bin/lava-test-case <8>[ 31.450507] /lava-719030/1/../bin/lava-test-case <8>[ 31.538610] /lava-719030/1/../bin/lava-test-case <8>[ 31.608511] /lava-719030/1/../bin/lava-test-case <8>[ 31.696594] /lava-719030/1/../bin/lava-test-case <8>[ 31.766825] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-719030/1/../bin/lava-test-case <8>[ 31.839866] /lava-719030/1/../bin/lava-test-case <8>[ 31.928353] /lava-719030/1/../bin/lava-test-case <8>[ 32.011130] + set +x<8>[ 32.036724] / #