Connected to bbb-patersonc-01 console [channel connected] (~$quit to exit) U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.69 (1004 ms) => setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 1001741/tftp-deploy-sa12wbex/kernel/zImage tftp 0x82000000 1001741/tftp-deploy-sa12wbex/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.69 Filename '1001741/tftp-deploy-sa12wbex/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 2.3 MiB/s done Bytes transferred = 10433024 (9f3200 hex) => tftp 0x83000000 1001741/tftp-deploy-sa12wbex/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1001741/tftp-deploy-sa12wbex/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.69 Filename '1001741/tftp-deploy-sa12wbex/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 2.4 MiB/s done Bytes transferred = 15349875 (ea3873 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1001741/tftp-deploy-sa12wbex/dtb/am335x-boneblack.dtb tftp 0x88000000 1001741/tftp-deploy-sa12wbex/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.69 Filename '1001741/tftp-deploy-sa12wbex/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *### 2.2 MiB/s done Bytes transferred = 34893 (884d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-08-27 23:47:18 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15349811 Bytes = 14.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b84c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.292-cip102 (KernelCI@build-j24383-arm-gcc-10-multi-v7-defconfig-kselftest-qqt2s) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Sun Aug 27 23:29:55 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omapserial0 at MMIO 0x44e09000 (options '') [ 0.000000] bootconsole [omapserial0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s40104 r8192 d21336 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 402796K/522240K available (15360K kernel code, 1762K rwdata, 6316K rodata, 2048K init, 7700K bss, 53908K reserved, 65536K cma-reserved, 0K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1763 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7701 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 49070 entries in 192 pages <6>[ 0.000000] ftrace: allocated 192 pages with 2 groups <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz <6>[ 0.000022] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008276] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018019] OMAP clocksource: timer1 at 24000000 Hz <2>[ 0.027386] timer_probe: no matching timers found <6>[ 0.033102] Console: colour dummy device 80x30 <4>[ 0.037898] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.046131] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.050566] ... MAX_LOCK_DEPTH: 48 <4>[ 0.055079] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.059838] ... CLASSHASH_SIZE: 4096 <4>[ 0.064531] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.069378] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.074160] ... CHAINHASH_SIZE: 32768 <4>[ 0.079014] memory used by lock dependency info: 4655 kB <4>[ 0.084787] per task-struct memory footprint: 1536 bytes <6>[ 0.090675] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.185110] CPU: Testing write buffer coherency: ok <6>[ 0.190488] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.195890] pid_max: default: 32768 minimum: 301 <6>[ 0.201251] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.208243] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.218874] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.226612] Setting up static identity map for 0x80300000 - 0x803000a0 <6>[ 0.235753] rcu: Hierarchical SRCU implementation. <6>[ 0.244952] EFI services will not be available. <6>[ 0.250520] smp: Bringing up secondary CPUs ... <6>[ 0.255382] smp: Brought up 1 node, 1 CPU <6>[ 0.259829] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.266463] CPU: All CPU(s) started in SVC mode. <6>[ 0.274599] devtmpfs: initialized <6>[ 0.308994] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.318153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.328600] futex hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.339983] pinctrl core: initialized pinctrl subsystem <6>[ 0.351096] DMI not present or invalid. <6>[ 0.357146] NET: Registered protocol family 16 <6>[ 0.370777] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.480247] l4_wkup_cm:clk:0010:0: failed to disable <6>[ 0.544971] cpuidle: using governor menu <6>[ 0.575419] OMAP GPIO hardware version 0.1 <6>[ 0.622285] No ATAGs? <6>[ 0.622303] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.650605] Serial: AMBA PL011 UART driver <6>[ 0.723686] edma 49000000.edma: TI EDMA DMA engine driver <6>[ 0.739763] vgaarb: loaded <5>[ 0.745304] SCSI subsystem initialized <6>[ 0.751759] usbcore: registered new interface driver usbfs <6>[ 0.757820] usbcore: registered new interface driver hub <6>[ 0.763723] usbcore: registered new device driver usb <6>[ 0.773948] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.779363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.789058] PTP clock support registered <6>[ 0.793891] EDAC MC: Ver: 3.0.0 <6>[ 0.808304] clocksource: Switched to clocksource timer1 <6>[ 1.071007] NET: Registered protocol family 2 <6>[ 1.076299] IP idents hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 1.085019] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) <6>[ 1.093386] TCP established hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 1.100970] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) <6>[ 1.108581] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 1.115690] UDP hash table entries: 256 (order: 2, 20480 bytes) <6>[ 1.122171] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) <6>[ 1.129449] NET: Registered protocol family 1 <6>[ 1.136870] RPC: Registered named UNIX socket transport module. <6>[ 1.143382] RPC: Registered udp transport module. <6>[ 1.148490] RPC: Registered tcp transport module. <6>[ 1.153511] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.162488] Trying to unpack rootfs image as initramfs... <6>[ 2.678644] Freeing initrd memory: 14992K <6>[ 2.685266] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.701132] Initialise system trusted keyrings <6>[ 2.707176] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 2.741768] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.751231] NFS: Registering the id_resolver key type <5>[ 2.756848] Key type id_resolver registered <5>[ 2.761523] Key type id_legacy registered <6>[ 2.766050] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.779389] Key type asymmetric registered <5>[ 2.783950] Asymmetric key parser 'x509' registered <6>[ 2.789507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 2.797381] io scheduler noop registered <6>[ 2.801711] io scheduler deadline registered <6>[ 2.806816] io scheduler cfq registered (default) <6>[ 2.811937] io scheduler mq-deadline registered <6>[ 2.816785] io scheduler kyber registered <4>[ 2.822021] test_firmware: interface ready <6>[ 2.847997] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.094817] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 3.112855] SuperH (H)SCI(F) driver initialized <6>[ 3.120647] msm_serial: driver initialized <6>[ 3.125919] omap_uart 44e09000.serial: no wakeirq for uart0 <6>[ 3.132398] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a OMAP UART0 <6>[ 3.142623] console [ttyO0] enabled <6>[ 3.142623] console [ttyO0] enabled <6>[ 3.150443] bootconsole [omapserial0] disabled <6>[ 3.150443] bootconsole [omapserial0] disabled <6>[ 3.162650] STMicroelectronics ASC driver initialized <6>[ 3.172540] STM32 USART driver initialized <6>[ 3.181984] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 3.197649] random: crng init done <6>[ 3.204081] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 <6>[ 3.254284] brd: module loaded <6>[ 3.283081] loop: module loaded <6>[ 3.320302] CAN device driver interface <6>[ 3.327075] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.336382] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 3.342892] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.349675] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 3.357259] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.448346] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.456727] davinci_mdio 4a101000.mdio: detected phy mask fffffffe <6>[ 3.497768] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.513392] cpsw 4a100000.ethernet: Detected MACID = f4:b8:98:ab:fa:84 <6>[ 3.521742] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.528960] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.539950] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.548334] usbcore: registered new interface driver pegasus <6>[ 3.554715] usbcore: registered new interface driver asix <6>[ 3.560843] usbcore: registered new interface driver ax88179_178a <6>[ 3.567613] usbcore: registered new interface driver cdc_ether <6>[ 3.574700] usbcore: registered new interface driver smsc75xx <6>[ 3.581277] usbcore: registered new interface driver smsc95xx <6>[ 3.587691] usbcore: registered new interface driver net1080 <6>[ 3.594077] usbcore: registered new interface driver cdc_subset <6>[ 3.600723] usbcore: registered new interface driver zaurus <6>[ 3.607018] usbcore: registered new interface driver cdc_ncm <6>[ 3.619645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.626798] ehci-pci: EHCI PCI platform driver <6>[ 3.631974] ehci-platform: EHCI generic platform driver <6>[ 3.638438] ehci-orion: EHCI orion driver <6>[ 3.643461] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.648528] ehci-st: EHCI STMicroelectronics driver <6>[ 3.654442] ehci-exynos: EHCI EXYNOS driver <6>[ 3.659710] ehci-atmel: EHCI Atmel driver <6>[ 3.664669] tegra-ehci: Tegra EHCI driver <6>[ 3.669749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.676612] ohci-pci: OHCI PCI platform driver <6>[ 3.681788] ohci-platform: OHCI generic platform driver <6>[ 3.688205] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.693234] ohci-st: OHCI STMicroelectronics driver <6>[ 3.699212] ohci-atmel: OHCI Atmel driver <6>[ 3.705648] usbcore: registered new interface driver usb-storage <6>[ 3.730048] i2c /dev entries driver <6>[ 3.774084] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.781025] sdhci: Copyright(c) Pierre Ossman <6>[ 3.789471] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.799028] omap_hsmmc 48060000.mmc: Got CD GPIO <6>[ 3.805850] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 <6>[ 3.843572] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 <6>[ 3.878500] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.889473] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.906982] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.918641] usbcore: registered new interface driver usbhid <6>[ 3.924791] usbhid: USB HID core driver <6>[ 3.943955] ipip: IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.951996] IPv4 over IPsec tunneling driver <6>[ 3.960648] NET: Registered protocol family 10 <6>[ 3.970391] Segment Routing with IPv6 <6>[ 3.976873] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.987641] NET: Registered protocol family 17 <6>[ 3.993238] can: controller area network core (rev 20170425 abi 9) <6>[ 4.000360] NET: Registered protocol family 29 <6>[ 4.005336] can: raw protocol (rev 20170425) <6>[ 4.010285] can: broadcast manager protocol (rev 20170425 t) <6>[ 4.016541] can: netlink gateway (rev 20170425) max_hops=1 <6>[ 4.023451] 8021q: 802.1Q VLAN Support v1.8 <5>[ 4.029114] Key type dns_resolver registered <6>[ 4.037197] ThumbEE CPU extension supported. <5>[ 4.042163] Registering SWP/SWPB emulation handler <3>[ 4.047541] omap_voltage_late_init: Voltage driver support not added <5>[ 4.061376] Loading compiled-in X.509 certificates <6>[ 4.174481] mmc1: new high speed MMC card at address 0001 <6>[ 4.185182] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 4.191843] mmcblk1boot0: mmc1:0001 MK2704 partition 1 2.00 MiB <6>[ 4.199730] mmcblk1boot1: mmc1:0001 MK2704 partition 2 2.00 MiB <6>[ 4.207997] mmcblk1rpmb: mmc1:0001 MK2704 partition 3 512 KiB, chardev (235:0) <6>[ 4.226684] mmcblk1: p1 <6>[ 4.263523] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.272639] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.281555] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.410670] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.420246] hctosys: unable to open rtc device (rtc0) <6>[ 4.444552] net eth0: initializing cpsw version 1.12 (0) <6>[ 4.549641] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 4.571143] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 4.577575] 8021q: adding VLAN 0 to HW filter on device eth0 <6>[ 7.729420] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx <6>[ 7.758388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.788249] Sending DHCP requests ., OK <6>[ 7.852659] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.69 <6>[ 7.861086] IP-Config: Complete: <6>[ 7.864763] device=eth0, hwaddr=f4:b8:98:ab:fa:84, ipaddr=192.168.1.69, mask=255.255.255.0, gw=192.168.1.1 <6>[ 7.875688] host=192.168.1.69, domain=example.org, nis-domain=(none) <6>[ 7.883142] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 7.883148] nameserver0=192.168.1.1 <6>[ 7.954954] Freeing unused kernel memory: 2048K <6>[ 7.961655] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.475123] udevd[84]: starting version 3.2.9 <27>[ 8.500839] udevd[84]: specified user 'tss' unknown <27>[ 8.506708] udevd[84]: specified group 'tss' unknown <30>[ 8.524571] udevd[85]: starting eudev-3.2.9 <4>[ 13.013764] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator <6>[ 13.025072] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 <4>[ 13.255772] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator <6>[ 13.267162] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 <6>[ 13.506634] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 13.513622] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 13.686504] hub 1-0:1.0: USB hub found <6>[ 13.711271] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1001741/environment . /lava-1001741/environment / # /lava-1001741/bin/lava-test-runner /lava-1001741/0 /lava-1001741/bin/lava-test-runner /lava-1001741/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1001741/0/tests/0_dmesg + cat uuid + UUID=1001741_1.5.2.4.1 + set +x <8>[ 17.028016] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : timer_probe: no matching timers found <8>[ 17.160414] <8>[ 17.275235] <8>[ 17.390214] + set +x <8>[ 17.403316] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1001741/environment / # . /lava-1001741/environment/lava-1001741/bin/lava-test-runner /lava-1001741/1 / # /lava-1001741/bin/lava-test-runner /lava-1001741/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1001741/1/tests/1_bootrr + cat uuid + UUID=1001741_1.5.2.4.5 + set +x <8>[ 18.037963] + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1001741/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-1001741/1/../bin/lava-test-case <8>[ 19.215540] /lava-1001741/1/../bin/lava-test-case <8>[ 19.327880] /lava-1001741/1/../bin/lava-test-case <8>[ 19.389995] /lava-1001741/1/../bin/lava-test-case <8>[ 20.532436] /lava-1001741/1/../bin/lava-test-case <8>[ 21.631063] /lava-1001741/1/../bin/lava-test-case <8>[ 21.714651] /lava-1001741/1/../bin/lava-test-case <8>[ 21.822895] /lava-1001741/1/../bin/lava-test-case <8>[ 21.929879] /lava-1001741/1/../bin/lava-test-case <8>[ 22.012650] /lava-1001741/1/../bin/lava-test-case <8>[ 22.119494] /lava-1001741/1/../bin/lava-test-case <8>[ 23.216061] /lava-1001741/1/../bin/lava-test-case <8>[ 24.315519] /lava-1001741/1/../bin/lava-test-case <8>[ 24.377465] /lava-1001741/1/../bin/lava-test-case <8>[ 24.438806] /lava-1001741/1/../bin/lava-test-case <8>[ 24.522025] /lava-1001741/1/../bin/lava-test-case <8>[ 24.627167] /lava-1001741/1/../bin/lava-test-case <8>[ 24.712036] /lava-1001741/1/../bin/lava-test-case <8>[ 25.834332] /lava-1001741/1/../bin/lava-test-case <8>[ 26.954716] /lava-1001741/1/../bin/lava-test-case <8>[ 27.037202] /lava-1001741/1/../bin/lava-test-case <8>[ 27.145388] /lava-1001741/1/../bin/lava-test-case <8>[ 27.254722] /lava-1001741/1/../bin/lava-test-case <8>[ 27.337932] /lava-1001741/1/../bin/lava-test-case <8>[ 27.447564] /lava-1001741/1/../bin/lava-test-case <8>[ 27.531921] /lava-1001741/1/../bin/lava-test-case <8>[ 27.639656] /lava-1001741/1/../bin/lava-test-case <8>[ 28.736186] /lava-1001741/1/../bin/lava-test-case <8>[ 29.836493] /lava-1001741/1/../bin/lava-test-case <8>[ 30.935077] /lava-1001741/1/../bin/lava-test-case <8>[ 32.034309] /lava-1001741/1/../bin/lava-test-case <8>[ 32.118423] /lava-1001741/1/../bin/lava-test-case <8>[ 32.224497] /lava-1001741/1/../bin/lava-test-case <8>[ 33.322017] /lava-1001741/1/../bin/lava-test-case <8>[ 34.420813] /lava-1001741/1/../bin/lava-test-case <8>[ 34.503994] /lava-1001741/1/../bin/lava-test-case <8>[ 34.612039] /lava-1001741/1/../bin/lava-test-case <8>[ 35.709639] /lava-1001741/1/../bin/lava-test-case <8>[ 36.807628] /lava-1001741/1/../bin/lava-test-case <8>[ 37.906392] /lava-1001741/1/../bin/lava-test-case <8>[ 39.005991] /lava-1001741/1/../bin/lava-test-case <8>[ 40.104025] /lava-1001741/1/../bin/lava-test-case <8>[ 41.202377] /lava-1001741/1/../bin/lava-test-case <8>[ 42.299896] /lava-1001741/1/../bin/lava-test-case <8>[ 43.397483] /lava-1001741/1/../bin/lava-test-case <8>[ 44.494976] /lava-1001741/1/../bin/lava-test-case <8>[ 45.593102] /lava-1001741/1/../bin/lava-test-case <8>[ 46.690800] /lava-1001741/1/../bin/lava-test-case <8>[ 47.789602] /lava-1001741/1/../bin/lava-test-case <8>[ 48.886221] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-1001741/1/../bin/lava-test-case <8>[ 48.974180] /lava-1001741/1/../bin/lava-test-case <8>[ 50.094718] /lava-1001741/1/../bin/lava-test-case <8>[ 51.187024] + set +x <8>[ 51.214021] / #