[Enter `^Ec?' for help] U-Boot 2021.10+dfsg-1+apertis10bv2023dev2b2 (Apr 18 2022 - 16:34:49 +0000) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPIFlash... SF: Detected gd25q16 with page size 256 Bytes, erase size 4 KiB, total 2 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: using phy at 7 FEC [PRIME], usb_ether Error: usb_ether address not set. starting USB... Bus usb@2184000: usb dr_mode not found Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.201.38 (8 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x10000000 11367981/tftp-deploy-99sn910v/kernel/zImage tftp 0x10000000 11367981/tftp-deploy-99sn910v/kernel/zImage Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.38 Filename '11367981/tftp-deploy-99sn910v/kernel/zImage'. Load address: 0x10000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 14.3 MiB/s done Bytes transferred = 10433024 (9f3200 hex) => tftp 0x14000000 11367981/tftp-deploy-99sn910v/ramdisk/ramdisk.cpio.gz.uboot tftp 0x14000000 11367981/tftp-deploy-99sn910v/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.38 Filename '11367981/tftp-deploy-99sn910v/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x14000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 14.3 MiB/s done Bytes transferred = 11424505 (ae52f9 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x13f00000 11367981/tftp-deploy-99sn910v/dtb/imx6q-sabrelite.dtb tftp 0x13f00000 11367981/tftp-deploy-99sn910v/dtb/imx6q-sabrelite.dtb Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.38 Filename '11367981/tftp-deploy-99sn910v/dtb/imx6q-sabrelite.dtb'. Load address: 0x13f00000 Loading: *### 3.3 MiB/s done Bytes transferred = 41818 (a35a hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/11367981/extract-nfsrootfs-tvj7nqp9,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/11367981/extract-nfsrootfs-tvj7nqp9,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x10000000 0x14000000 0x13f00000 bootz 0x10000000 0x14000000 0x13f00000 Kernel image @ 0x10000000 [ 0x000000 - 0x9f3200 ] ## Loading init Ramdisk from Legacy Image at 14000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 11424441 Bytes = 10.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 13f00000 Booting using the fdt blob at 0x13f00000 Using Device Tree in place at 13f00000, end 13f0d359 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.292-cip102 (KernelCI@build-j24383-arm-gcc-10-multi-v7-defconfig-kselftest-qqt2s) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Sun Aug 27 23:29:55 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] OF: fdt: Reserved memory: unsupported node format, ignoring [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] percpu: Embedded 17 pages/cpu s40104 r8192 d21336 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/11367981/extract-nfsrootfs-tvj7nqp9,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 928380K/1048576K available (15360K kernel code, 1762K rwdata, 6316K rodata, 2048K init, 7700K bss, 54660K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1763 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7701 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] ftrace: allocating 49070 entries in 192 pages <6>[ 0.000000] ftrace: allocated 192 pages with 2 groups <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008445] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.022041] Console: colour dummy device 80x30 <4>[ 0.023928] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.031953] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.036297] ... MAX_LOCK_DEPTH: 48 <4>[ 0.040704] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.045315] ... CLASSHASH_SIZE: 4096 <4>[ 0.049955] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.054625] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.059352] ... CHAINHASH_SIZE: 32768 <4>[ 0.064021] memory used by lock dependency info: 4655 kB <4>[ 0.069702] per task-struct memory footprint: 1536 bytes <6>[ 0.075380] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.085806] CPU: Testing write buffer coherency: ok <6>[ 0.090906] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.096245] pid_max: default: 32768 minimum: 301 <6>[ 0.101403] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.108015] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.118110] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.123466] Setting up static identity map for 0x10300000 - 0x103000a0 <6>[ 0.130276] rcu: Hierarchical SRCU implementation. <6>[ 0.137444] EFI services will not be available. <6>[ 0.140347] smp: Bringing up secondary CPUs ... <6>[ 0.146618] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.146632] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.158290] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.158302] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.169211] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.169223] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.178325] smp: Brought up 1 node, 4 CPUs <6>[ 0.182266] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.188775] CPU: All CPU(s) started in SVC mode. <6>[ 0.196444] devtmpfs: initialized <6>[ 0.232091] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.239826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.247416] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.257742] pinctrl core: initialized pinctrl subsystem <6>[ 0.265374] DMI not present or invalid. <6>[ 0.268672] NET: Registered protocol family 16 <6>[ 0.279687] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.290497] cpuidle: using governor menu <6>[ 0.292327] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.333328] vdd1p1: supplied by regulator-dummy <6>[ 0.337366] vdd3p0: supplied by regulator-dummy <6>[ 0.341899] vdd2p5: supplied by regulator-dummy <6>[ 0.346739] vddarm: supplied by regulator-dummy <6>[ 0.352120] vddpu: supplied by regulator-dummy <6>[ 0.355738] vddsoc: supplied by regulator-dummy <6>[ 0.409121] No ATAGs? <6>[ 0.409607] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.417670] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.435170] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.443182] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.467571] Serial: AMBA PL011 UART driver <6>[ 0.569885] mxs-dma 110000.dma-apbh: initialized <6>[ 0.596474] vgaarb: loaded <5>[ 0.599520] SCSI subsystem initialized <6>[ 0.602106] usbcore: registered new interface driver usbfs <6>[ 0.606684] usbcore: registered new interface driver hub <6>[ 0.612145] usbcore: registered new device driver usb <6>[ 0.622015] i2c i2c-0: IMX I2C adapter registered <6>[ 0.624172] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.631658] i2c i2c-1: IMX I2C adapter registered <6>[ 0.634694] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.641613] i2c i2c-2: IMX I2C adapter registered <6>[ 0.645219] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.654867] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.657309] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.666758] PTP clock support registered <6>[ 0.671660] EDAC MC: Ver: 3.0.0 <6>[ 0.685397] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.954129] NET: Registered protocol family 2 <6>[ 0.956675] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.965139] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.971093] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.978443] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.986266] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.992151] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.998032] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 1.005025] NET: Registered protocol family 1 <6>[ 1.010919] RPC: Registered named UNIX socket transport module. <6>[ 1.015170] RPC: Registered udp transport module. <6>[ 1.020214] RPC: Registered tcp transport module. <6>[ 1.025081] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.033701] Trying to unpack rootfs image as initramfs... <6>[ 2.239344] Freeing initrd memory: 11160K <4>[ 2.241602] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 2.249197] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 2.264113] Initialise system trusted keyrings <6>[ 2.266822] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 2.301205] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.307204] NFS: Registering the id_resolver key type <5>[ 2.309870] Key type id_resolver registered <5>[ 2.314221] Key type id_legacy registered <6>[ 2.318722] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.330802] Key type asymmetric registered <5>[ 2.332385] Asymmetric key parser 'x509' registered <6>[ 2.337825] bounce: pool size: 64 pages <6>[ 2.341657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 2.349313] io scheduler noop registered <6>[ 2.353383] io scheduler deadline registered <6>[ 2.358416] io scheduler cfq registered (default) <6>[ 2.362868] io scheduler mq-deadline registered <6>[ 2.367700] io scheduler kyber registered <4>[ 2.372474] test_firmware: interface ready <6>[ 2.452748] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.457815] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.465215] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.471996] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.525474] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 2.529184] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 2.536870] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 2.543206] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 2.551220] PU : no governor for states <6>[ 2.554791] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <4>[ 2.587100] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 2.594183] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 2.792306] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 2.808875] SuperH (H)SCI(F) driver initialized <6>[ 2.813015] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 27, base_baud = 5000000) is a IMX <6>[ 2.822520] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 74, base_baud = 5000000) is a IMX <6>[ 2.831658] console [ttymxc1] enabled <6>[ 2.831658] console [ttymxc1] enabled <6>[ 2.836731] bootconsole [ec_imx21] disabled <6>[ 2.836731] bootconsole [ec_imx21] disabled <6>[ 2.849595] msm_serial: driver initialized <6>[ 2.854826] STMicroelectronics ASC driver initialized <6>[ 2.865592] STM32 USART driver initialized <6>[ 2.885865] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 <4>[ 2.910805] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.919794] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.927133] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.934169] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.943551] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.951148] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.987911] brd: module loaded <6>[ 3.020504] loop: module loaded <6>[ 3.033788] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 3.042057] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 3.050407] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 3.058952] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <6>[ 3.070401] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 3.077751] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 3.086895] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 3.099955] scsi host0: ahci-imx <6>[ 3.105414] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 77 <6>[ 3.150493] CAN device driver interface <6>[ 3.158193] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <4>[ 3.167223] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 3.176538] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 3.186705] pps pps0: new PPS source ptp0 <6>[ 3.225575] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.234896] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 3.241068] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.247486] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 3.254731] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.277875] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.285727] usbcore: registered new interface driver pegasus <6>[ 3.291834] usbcore: registered new interface driver asix <6>[ 3.297671] usbcore: registered new interface driver ax88179_178a <6>[ 3.304154] usbcore: registered new interface driver cdc_ether <6>[ 3.310532] usbcore: registered new interface driver smsc75xx <6>[ 3.316781] usbcore: registered new interface driver smsc95xx <6>[ 3.322919] usbcore: registered new interface driver net1080 <6>[ 3.329012] usbcore: registered new interface driver cdc_subset <6>[ 3.335618] usbcore: registered new interface driver zaurus <6>[ 3.341694] usbcore: registered new interface driver cdc_ncm <6>[ 3.356359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.363177] ehci-pci: EHCI PCI platform driver <6>[ 3.368074] ehci-platform: EHCI generic platform driver <6>[ 3.374398] ehci-orion: EHCI orion driver <6>[ 3.379472] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.384466] ehci-st: EHCI STMicroelectronics driver <6>[ 3.390370] ehci-exynos: EHCI EXYNOS driver <6>[ 3.395573] ehci-atmel: EHCI Atmel driver <6>[ 3.400541] tegra-ehci: Tegra EHCI driver <6>[ 3.405603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.412121] ohci-pci: OHCI PCI platform driver <6>[ 3.417014] ohci-platform: OHCI generic platform driver <6>[ 3.423296] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.428326] ohci-st: OHCI STMicroelectronics driver <6>[ 3.434179] ohci-atmel: OHCI Atmel driver <6>[ 3.441239] usbcore: registered new interface driver usb-storage <6>[ 3.447747] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 3.453567] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 3.453972] imx_usb 2184000.usb: Linked as a consumer to regulator.9 <6>[ 3.460178] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <6>[ 3.477148] imx_usb 2184200.usb: Linked as a consumer to regulator.14 <6>[ 3.489108] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.494470] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.525358] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.534973] hub 1-0:1.0: USB hub found <6>[ 3.539413] hub 1-0:1.0: 1 port detected <6>[ 3.566350] i2c /dev entries driver <6>[ 3.618837] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 3.640707] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.647236] sdhci: Copyright(c) Pierre Ossman <6>[ 3.658334] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.670716] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.678579] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO <6>[ 3.684100] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO <6>[ 3.690010] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 <6>[ 3.732623] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <6>[ 3.741453] sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO <6>[ 3.747415] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 <6>[ 3.786001] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA <6>[ 3.805504] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.814767] usbcore: registered new interface driver usbhid <6>[ 3.820765] usbhid: USB HID core driver <6>[ 3.841273] mmc0: new high speed SDHC card at address aaaa <6>[ 3.843051] ipip: IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.851534] mmcblk0: mmc0:aaaa SL16G 14.8 GiB <6>[ 3.854596] IPv4 over IPsec tunneling driver <6>[ 3.866290] NET: Registered protocol family 10 <6>[ 3.874723] Segment Routing with IPv6 <6>[ 3.875388] usb 1-1: new high-speed USB device number 2 using ci_hdrc <6>[ 3.881126] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.896086] NET: Registered protocol family 17 <6>[ 3.901289] can: controller area network core (rev 20170425 abi 9) <6>[ 3.908007] NET: Registered protocol family 29 <6>[ 3.912780] can: raw protocol (rev 20170425) <6>[ 3.917479] can: broadcast manager protocol (rev 20170425 t) <6>[ 3.923460] can: netlink gateway (rev 20170425) max_hops=1 <6>[ 3.930037] 8021q: 802.1Q VLAN Support v1.8 <5>[ 3.935293] Key type dns_resolver registered <6>[ 3.949156] cpu cpu0: Linked as a consumer to regulator.4 <6>[ 3.955126] cpu cpu0: Linked as a consumer to regulator.5 <4>[ 3.960923] ------------[ cut here ]------------ <6>[ 3.961155] cpu cpu0: Linked as a consumer to regulator.6 <4>[ 3.965826] WARNING: CPU: 1 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x138/0x1f0 <4>[ 3.965831] Modules linked in: <4>[ 3.965845] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.292-cip102 #1 <4>[ 3.965851] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 3.965856] Backtrace: <4>[ 3.965877] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 3.965888] r7:ffffffff r6:00000000 r5:60000093 r4:c1c9d72c <6>[ 3.976316] ThumbEE CPU extension supported. <4>[ 3.980342] [] (show_stack) from [] (dump_stack+0xe0/0x10c) <4>[ 3.980361] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) <5>[ 3.983696] Registering SWP/SWPB emulation handler <4>[ 3.985290] ------------[ cut here ]------------ <4>[ 3.985308] WARNING: CPU: 2 PID: 0 at include/trace/events/lock.h:58 lock_release+0x364/0x370 <4>[ 3.985314] Modules linked in: <4>[ 3.990635] r9:60000093 r8:c1b084bc r7:00000000 r6:00000009 r5:00000000 r4:00000000 <4>[ 3.990647] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) <4>[ 3.990655] r6:c03b8c2c r5:0000000d r4:c1681e10 <4>[ 3.990666] [] (warn_slowpath_null) from [] (lock_acquire+0x138/0x1f0) <4>[ 3.990673] r6:00000000 r5:00000000 r4:c1b05990 <4>[ 3.990691] [] (lock_acquire) from [] (_raw_spin_lock+0x58/0x68) <4>[ 3.990702] r10:ef7ab2f8 r9:ef7ab2f8 r8:00000001 r7:ef7af740 r6:00000001 r5:c23e9aec <5>[ 4.008672] Loading compiled-in X.509 certificates <4>[ 4.013961] r4:c1b05980 <4>[ 4.014006] [] (_raw_spin_lock) from [] (__tick_broadcast_oneshot_control+0x4c/0x2ac) <4>[ 4.124415] r4:ee9d7ee8 <4>[ 4.127246] [] (__tick_broadcast_oneshot_control) from [] (tick_broadcast_oneshot_control+0x3c/0x40) <4>[ 4.138406] r9:ef7ab2f8 r8:00000001 r7:c1b10e94 r6:c1b10ea4 r5:c1b10e44 r4:00000001 <4>[ 4.146448] [] (tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x50/0x520) <4>[ 4.156564] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) <4>[ 4.165121] r10:ef7ab2f8 r9:c1b10e44 r8:c1aa22f0 r7:c1b08500 r6:c1b10e44 r5:ef7ab2f8 <4>[ 4.173232] r4:00000001 <4>[ 4.176071] [] (cpuidle_enter) from [] (do_idle+0x20c/0x2f8) <4>[ 4.183755] r7:c1b08500 r6:c1b084bc r5:00000001 r4:ee9d6000 <4>[ 4.189714] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) <4>[ 4.197574] r10:00000000 r9:412fc09a r8:1020406a r7:c1cb9650 r6:00000001 r5:ee9d6000 <4>[ 4.205681] r4:00000089 <4>[ 4.208517] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x170/0x17c) <6>[ 4.214010] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <4>[ 4.217854] [] (secondary_start_kernel) from [<1030312c>] (0x1030312c) <4>[ 4.217872] r7:c1cb9650 r6:10c0387d r5:00000051 r4:3e9c406a <4>[ 4.217883] irq event stamp: 15396 <4>[ 4.217895] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.292-cip102 #1 <4>[ 4.217922] hardirqs last enabled at (15395): [] _raw_read_unlock_irqrestore+0x64/0x6c <4>[ 4.217928] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 4.217947] hardirqs last disabled at (15396): [] do_idle+0xb0/0x2f8 <4>[ 4.217950] Backtrace: <4>[ 4.217969] softirqs last enabled at (15388): [] __do_softirq+0x344/0x520 <4>[ 4.217999] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 4.218024] softirqs last disabled at (15371): [] irq_exit+0x170/0x1c8 <4>[ 4.218044] r7:ffffffff r6:00000000 r5:600e0093 r4:c1c9d72c <4>[ 4.218049] ---[ end trace 8c833b3655d0d9cf ]--- <4>[ 4.218076] [] (show_stack) from [] (dump_stack+0xe0/0x10c) <6>[ 4.226672] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <4>[ 4.233206] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) <4>[ 4.233238] r9:c03ff6d8 r8:00000002 r7:600e0093 r6:00000009 r5:00000000 r4:00000000 <4>[ 4.233260] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) <4>[ 4.233276] r6:c03b8ae8 r5:0000003a r4:c1681e10 <6>[ 4.251771] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <4>[ 4.259108] [] (warn_slowpath_null) from [] (lock_release+0x364/0x370) <4>[ 4.259123] r6:c1b456c4 r5:c1b456c4 r4:c1b084bc <4>[ 4.259150] [] (lock_release) from [] (ktime_get+0x84/0x1ac) <4>[ 4.259171] r10:00000001 r9:600e0093 r8:00000002 r7:c1b45700 r6:c1b456c4 r5:c03ff6d8 <4>[ 4.259181] r4:c1b45600 <4>[ 4.259204] [] (ktime_get) from [] (clockevents_program_event+0x6c/0x184) <4>[ 4.259224] r10:ef7bc2f8 r9:c23e9b00 r8:00000002 r7:eca16480 r6:00000000 r5:00000001 <6>[ 4.266706] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.273509] r4:ee829c40 <4>[ 4.273540] [] (clockevents_program_event) from [] (tick_broadcast_set_event+0x54/0xb4) <4>[ 4.289115] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <4>[ 4.292092] r7:eca16480 r6:00000000 r5:00000002 r4:ee829c40 <4>[ 4.292132] [] (tick_broadcast_set_event) from [] (__tick_broadcast_oneshot_control+0x140/0x2ac) <6>[ 4.300519] panel-simple panel-lcd: Linked as a consumer to regulator.0 <4>[ 4.305835] r7:ef7c0740 r6:ee829c40 r5:00000000 r4:00000002 <4>[ 4.305858] [] (__tick_broadcast_oneshot_control) from [] (tick_broadcast_oneshot_control+0x3c/0x40) <4>[ 4.305878] r9:ef7bc2f8 r8:00000001 r7:c1b10e94 r6:c1b10ea4 r5:c1b10e44 r4:00000001 <4>[ 4.305903] [] (tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x50/0x520) <4>[ 4.305933] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) <6>[ 4.311501] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.318396] r10:ef7bc2f8 r9:c1b10e44 r8:c1aa22f0 r7:c1b08500 r6:c1b10e44 r5:ef7bc2f8 <4>[ 4.318407] r4:00000001 <4>[ 4.318435] [] (cpuidle_enter) from [] (do_idle+0x20c/0x2f8) <4>[ 4.318452] r7:c1b08500 r6:c1b084bc r5:00000002 r4:ee9d8000 <4>[ 4.318478] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) <4>[ 4.318498] r10:00000000 r9:412fc09a r8:1020406a r7:c1cb9650 r6:00000002 r5:ee9d8000 <4>[ 4.336065] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <4>[ 4.341309] r4:00000089 <4>[ 4.341349] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x170/0x17c) <6>[ 4.350369] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <4>[ 4.354669] [] (secondary_start_kernel) from [<1030312c>] (0x1030312c) <4>[ 4.354686] r7:c1cb9650 r6:10c0387d r5:00000051 r4:3e9c406a <6>[ 4.362861] panel-simple panel-lvds0: Dropping the link to regulator.0 <4>[ 4.370618] irq event stamp: 11880 <4>[ 4.370646] hardirqs last enabled at (11879): [] _raw_read_unlock_irqrestore+0x64/0x6c <4>[ 4.370667] hardirqs last disabled at (11880): [] do_idle+0xb0/0x2f8 <4>[ 4.370690] softirqs last enabled at (11872): [] _local_bh_enable+0x34/0x68 <4>[ 4.370717] softirqs last disabled at (11871): [] irq_enter+0x6c/0x94 <4>[ 4.638392] ---[ end trace 8c833b3655d0d9d0 ]--- <6>[ 4.646828] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C <4>[ 4.653162] GPT:Primary header thinks Alt. header is not at the end of the disk. <4>[ 4.664335] GPT:29296874 != 31116287 <4>[ 4.668261] GPT:Alternate GPT header not at the end of the disk. <6>[ 4.668411] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <4>[ 4.674543] GPT:29296874 != 31116287 <4>[ 4.674553] GPT: Use GNU Parted to correct GPT errors. <6>[ 4.682238] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.685825] mmcblk0: p1 p2 p3 <6>[ 4.695812] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 4.709617] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.721946] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 4.730908] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 4.738151] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.749125] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 4.758402] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.765787] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.774002] hub 1-1:1.0: USB hub found <6>[ 4.776249] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 4.778388] hub 1-1:1.0: 3 ports detected <6>[ 4.785689] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.801238] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 4.808944] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.821167] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 4.830058] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 4.837286] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.848231] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 4.857473] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.864813] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.875407] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 4.882972] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.894869] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 4.902597] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.914871] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 4.923768] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 4.931000] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.941967] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 4.951228] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.958617] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.969086] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 4.976697] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.990711] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 4.998740] hctosys: unable to open rtc device (rtc0) <6>[ 5.009031] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 5.017093] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 5.029575] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 5.038504] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 5.045737] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 5.056775] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 5.066034] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 5.073377] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 5.083900] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 5.091520] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 5.128528] Micrel KSZ9021 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 5.145040] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 8.257446] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 8.267276] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.295312] Sending DHCP requests ., OK <6>[ 8.339863] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.38 <6>[ 8.348388] IP-Config: Complete: <6>[ 8.351941] device=eth0, hwaddr=00:19:b8:08:f0:fe, ipaddr=192.168.201.38, mask=255.255.255.0, gw=192.168.201.1 <6>[ 8.362792] host=imx6q-sabrelite-lava-cbg-8, domain=lava-rack, nis-domain=(none) <6>[ 8.371039] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 8.371055] nameserver0=192.168.201.1 <6>[ 8.440683] Freeing unused kernel memory: 2048K <6>[ 8.486757] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u2 <6>[ 11.420989] flexcan 2090000.flexcan: Linked as a consumer to regulator.10 <6>[ 11.442344] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 11.443147] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=35) <6>[ 11.450760] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 11.470620] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 11.479637] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 11.498980] panel-simple panel-lcd: Dropping the link to regulator.0 <6>[ 11.506413] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <4>[ 11.519825] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 11.529146] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 11.537257] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 11.545261] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 11.548020] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 11.559881] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 11.572333] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 11.580738] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 11.593611] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 11.602622] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 11.610044] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) <6>[ 11.610120] panel-simple panel-lcd: Dropping the link to regulator.0 <6>[ 11.616975] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <4>[ 11.687805] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 11.698040] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 11.705960] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 11.707598] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 11.717080] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 11.727140] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 11.740972] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 11.748815] sgtl5000 0-000a: Linked as a consumer to regulator.7 <6>[ 11.750366] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 11.755166] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <6>[ 11.761691] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 11.769725] sgtl5000 0-000a: Linked as a consumer to regulator.8 <4>[ 11.785405] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 11.794280] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 11.799320] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 <6>[ 11.801775] panel-simple panel-lcd: Dropping the link to regulator.0 <6>[ 11.815647] sgtl5000 0-000a: sgtl5000 revision 0x11 <4>[ 11.820006] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 11.830128] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 11.837848] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 11.849311] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 11.856807] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum <6>[ 11.865297] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 11.877710] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 11.885595] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 11.898864] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 11.907836] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 11.915367] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 11.957730] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 11.967052] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 11.975155] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 11.988465] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 11.997769] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 12.009679] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 12.017523] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 12.030557] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 12.039581] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 12.047420] panel-simple panel-lcd: Dropping the link to regulator.0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. IP-Config: eth0 hardware address 00:19:b8:08:f0:fe mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.201.1): address: 192.168.201.38 broadcast: 192.168.201.255 netmask: 255.255.255.0 gateway: 192.168.201.1 dns0 : 192.168.201.1 dns1 : 0.0.0.0 host : imx6q-sabrelite-lava-cbg-8 domain : lava-rack rootserver: 192.168.201.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 13.762635] systemd[1]: System time before build time, advancing clock. <3>[ 13.843756] cgroup: cgroup2: unknown option "memory_recursiveprot" <30>[ 13.882831] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) <30>[ 13.908301] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! <30>[ 13.951873] systemd[1]: Set hostname to . <30>[ 15.357628] systemd[1]: Queued start job for default target Graphical Interface. <5>[ 15.368477] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 15.379771] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. <5>[ 15.415746] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 15.424531] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. <5>[ 15.466223] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 15.477418] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. <30>[ 15.517346] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. <30>[ 15.559304] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. <30>[ 15.609055] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. <30>[ 15.657432] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <30>[ 15.670740] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. <30>[ 15.716940] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. <30>[ 15.757050] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. <30>[ 15.795836] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. <30>[ 15.836531] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. <30>[ 15.879667] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. <30>[ 15.980378] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <30>[ 15.993037] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). <30>[ 16.041272] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. <30>[ 16.091016] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. <30>[ 16.145474] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. <30>[ 16.189749] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. <30>[ 16.227230] systemd[1]: Condition check resulted in Huge Pages File System being skipped. <30>[ 16.236770] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. <30>[ 16.255694] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... <30>[ 16.306711] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... <5>[ 16.385637] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 16.400004] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... <5>[ 16.421072] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 16.435584] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... <5>[ 16.476207] random: systemd: uninitialized urandom read (16 bytes read) <30>[ 16.491876] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... <30>[ 16.533188] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... <30>[ 16.570625] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <6>[ 16.596495] fuse init (API version 7.27) <30>[ 16.601470] systemd[1]: Starting Journal Service... Starting Journal Service... <30>[ 16.659852] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... <30>[ 16.703700] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... <30>[ 16.754140] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... <30>[ 16.812807] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. <30>[ 16.858378] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. <30>[ 16.903400] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. <30>[ 16.980067] systemd[1]: modprobe@configfs.service: Succeeded. <30>[ 16.989577] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. <30>[ 17.030823] systemd[1]: modprobe@drm.service: Succeeded. <30>[ 17.039758] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. <30>[ 17.080780] systemd[1]: modprobe@fuse.service: Succeeded. <30>[ 17.089934] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. <30>[ 17.130403] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. <30>[ 17.171196] systemd[1]: Finished Remount Root and Kernel File Systems. [ OK ] Finished Remount Root and Kernel File Systems. <30>[ 17.225801] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... <30>[ 17.272868] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... <30>[ 17.300593] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. <30>[ 17.310943] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. <30>[ 17.328035] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... <30>[ 17.373701] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... <5>[ 17.396319] random: systemd-journal: uninitialized urandom read (16 bytes read) <5>[ 17.406555] random: systemd-journal: uninitialized urandom read (16 bytes read) <5>[ 17.416858] random: systemd-journal: uninitialized urandom read (16 bytes read) <30>[ 17.423672] systemd[1]: Starting Create System Users... Starting Create System Users... <30>[ 17.476372] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Flush Journal to Persistent Storage... Starting Create Static Device Nodes in /dev... <46>[ 17.797388] systemd-journald[166]: Received client request to flush runtime journal. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rule-based Manage…for Device Events and Files... <5>[ 18.686048] random: crng init done <5>[ 18.689878] random: 46 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. Starting Network Service... [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Network Service. Starting Network Name Resolution... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Finished Coldplug All udev Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting User Login Management... [ OK ] Started Network Name Resolution. [ OK ] Found device /dev/ttymxc1. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started User Login Management. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting Permit User Sessions... [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. Debian GNU/Linux 11 debian-bullseye-armhf ttymxc1 debian-bullseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 4.19.292-cip102 #1 SMP Sun Aug 27 23:29:55 UTC 2023 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/11367981/extract-nfsrootfs-tvj7nqp9' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/11367981/extract-nfsrootfs-tvj7nqp9' / # export NFS_SERVER_IP='192.168.201.1' export NFS_SERVER_IP='192.168.201.1' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11367981/environment . /lava-11367981/environment / # /lava-11367981/bin/lava-test-runner /lava-11367981/0 /lava-11367981/bin/lava-test-runner /lava-11367981/0 + export TESTRUN_ID=0_dmesg + cd /lava-11367981/0/tests/0_dmesg + cat uuid + UUID=11367981_1.6.2.4.1<8>[ 35.004096] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 35.186388] <8>[ 35.335558] <8>[ 35.486980] + set +x <8>[ 35.498218] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11367981/environment / # . /lava-11367981/environment/lava-11367981/bin/lava-test-runner /lava-11367981/1 / # /lava-11367981/bin/lava-test-runner /lava-11367981/1 + export TESTRUN_ID=1_bootrr + cd /lava-11367981/1/tests/1_bootrr + cat uuid + UUID=11367981_1.6.2.4.5 <8>[ 36.218142] + set +x + export PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11367981/1/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto panel-lvds0 backlight-lcd backlight-lvds panel-lcd /lava-11367981/1/../bin/lava-test-case <8>[ 37.474836] /lava-11367981/1/../bin/lava-test-case <8>[ 37.622521] /lava-11367981/1/../bin/lava-test-case <8>[ 37.696907] + set +x<8>[ 37.751739] / #