connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1002011/tftp-deploy-5qjf6isc/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1002011/tftp-deploy-5qjf6isc/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1002011/tftp-deploy-5qjf6isc/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1002011/tftp-deploy-5qjf6isc/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1002011/tftp-deploy-5qjf6isc/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1002011/tftp-deploy-5qjf6isc/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address a6:6f:62:78:e6:0d T eth0: DHCP client bound to address 10.8.254.38 Loading ARM Linux zImage '/mnt/tftp/1002011/tftp-deploy-5qjf6isc/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x131c0000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1002011/tftp-deploy-5qjf6isc/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18ea5121 Loading devicetree from '/mnt/tftp/1002011/tftp-deploy-5qjf6isc/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x131c0000, initrd at 0x18000000, oftree at 0x18ea6000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.295-cip103 (KernelCI@build-j60818-arm-gcc-10-multi-v7-defconfig-kselftest-s2kwm) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Thu Sep 28 23:50:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s40104 r8192 d21336 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1963896K/2097152K available (15360K kernel code, 1762K rwdata, 6316K rodata, 2048K init, 7700K bss, 67720K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1763 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7701 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 49070 entries in 192 pages [ 0.000000] ftrace: allocated 192 pages with 2 groups [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000039] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003513] Console: colour dummy device 80x30 [ 0.003566] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003590] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003613] ... MAX_LOCK_DEPTH: 48 [ 0.003635] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003657] ... CLASSHASH_SIZE: 4096 [ 0.003678] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003701] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003722] ... CHAINHASH_SIZE: 32768 [ 0.003743] memory used by lock dependency info: 4655 kB [ 0.003766] per task-struct memory footprint: 1536 bytes [ 0.003852] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003887] CPU: Testing write buffer coherency: ok [ 0.003985] CPU0: Spectre v2: using BPIALL workaround [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004367] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004413] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.007583] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010050] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.012336] rcu: Hierarchical SRCU implementation. [ 0.016609] EFI services will not be available. [ 0.017580] smp: Bringing up secondary CPUs ... [ 0.020101] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020113] CPU1: Spectre v2: using BPIALL workaround [ 0.023036] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023048] CPU2: Spectre v2: using BPIALL workaround [ 0.025605] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025618] CPU3: Spectre v2: using BPIALL workaround [ 0.026058] smp: Brought up 1 node, 4 CPUs [ 0.026092] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026116] CPU: All CPU(s) started in SVC mode. [ 0.028750] devtmpfs: initialized [ 0.061129] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.064171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.064232] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.068388] pinctrl core: initialized pinctrl subsystem [ 0.073620] DMI not present or invalid. [ 0.075553] NET: Registered protocol family 16 [ 0.083801] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.090149] cpuidle: using governor menu [ 0.090616] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.120314] vdd1p1: supplied by regulator-dummy [ 0.122381] vdd3p0: supplied by regulator-dummy [ 0.124249] vdd2p5: supplied by regulator-dummy [ 0.126086] vddarm: supplied by regulator-dummy [ 0.128538] vddpu: supplied by regulator-dummy [ 0.129909] vddsoc: supplied by regulator-dummy [ 0.179098] No ATAGs? [ 0.179585] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.179675] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.190295] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.191437] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.208629] Serial: AMBA PL011 UART driver [ 0.304908] mxs-dma 110000.dma-apbh: initialized [ 0.312875] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.312917] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.312949] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.312976] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.313116] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.323534] vgaarb: loaded [ 0.326379] SCSI subsystem initialized [ 0.327862] usbcore: registered new interface driver usbfs [ 0.328089] usbcore: registered new interface driver hub [ 0.328260] usbcore: registered new device driver usb [ 0.332297] i2c i2c-0: IMX I2C adapter registered [ 0.332354] i2c i2c-0: can't use DMA, using PIO instead. [ 0.334309] i2c i2c-1: IMX I2C adapter registered [ 0.334364] i2c i2c-1: can't use DMA, using PIO instead. [ 0.336102] i2c i2c-2: IMX I2C adapter registered [ 0.336153] i2c i2c-2: can't use DMA, using PIO instead. [ 0.339924] pps_core: LinuxPPS API ver. 1 registered [ 0.339954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.340031] PTP clock support registered [ 0.340811] EDAC MC: Ver: 3.0.0 [ 0.351462] clocksource: Switched to clocksource mxc_timer1 [ 0.609219] NET: Registered protocol family 2 [ 0.609876] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.612814] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.612968] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.613181] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.614465] TCP: Hash tables configured (established 8192 bind 8192) [ 0.615006] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.615240] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.615879] NET: Registered protocol family 1 [ 0.617924] RPC: Registered named UNIX socket transport module. [ 0.617983] RPC: Registered udp transport module. [ 0.618012] RPC: Registered tcp transport module. [ 0.618037] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.619986] Trying to unpack rootfs image as initramfs... [ 2.432763] Freeing initrd memory: 15000K [ 2.433570] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.435018] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.442603] Initialise system trusted keyrings [ 2.443674] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 2.471753] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.474459] NFS: Registering the id_resolver key type [ 2.474597] Key type id_resolver registered [ 2.474655] Key type id_legacy registered [ 2.474847] ntfs: driver 2.1.32 [Flags: R/O]. [ 2.482503] Key type asymmetric registered [ 2.482617] Asymmetric key parser 'x509' registered [ 2.482925] bounce: pool size: 64 pages [ 2.483057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.483142] io scheduler noop registered [ 2.483174] io scheduler deadline registered [ 2.483669] io scheduler cfq registered (default) [ 2.483703] io scheduler mq-deadline registered [ 2.483733] io scheduler kyber registered [ 2.484361] test_firmware: interface ready [ 2.595738] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 2.596164] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 2.596402] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 2.596896] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 2.597437] PU : no governor for states [ 2.597509] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 2.619910] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.620113] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 2.812828] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.825263] SuperH (H)SCI(F) driver initialized [ 2.827328] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 3.791635] console [ttymxc0] enabled [ 3.798135] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 3.810659] msm_serial: driver initialized [ 3.815633] STMicroelectronics ASC driver initialized [ 3.825520] STM32 USART driver initialized [ 3.844263] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 3.896766] brd: module loaded [ 3.928690] loop: module loaded [ 3.941236] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 3.949301] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 3.957460] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 3.965712] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 3.976820] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.983941] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.992814] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.005541] scsi host0: ahci-imx [ 4.010565] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 4.052961] CAN device driver interface [ 4.060000] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.068867] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 4.079046] pps pps0: new PPS source ptp0 [ 4.128509] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.137468] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.143384] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.149513] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.156553] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.177841] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.185442] usbcore: registered new interface driver pegasus [ 4.191278] usbcore: registered new interface driver asix [ 4.196865] usbcore: registered new interface driver ax88179_178a [ 4.203157] usbcore: registered new interface driver cdc_ether [ 4.209184] usbcore: registered new interface driver smsc75xx [ 4.215161] usbcore: registered new interface driver smsc95xx [ 4.221033] usbcore: registered new interface driver net1080 [ 4.226902] usbcore: registered new interface driver cdc_subset [ 4.233005] usbcore: registered new interface driver zaurus [ 4.238804] usbcore: registered new interface driver cdc_ncm [ 4.252659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.259220] ehci-pci: EHCI PCI platform driver [ 4.263870] ehci-platform: EHCI generic platform driver [ 4.269876] ehci-orion: EHCI orion driver [ 4.274620] SPEAr-ehci: EHCI SPEAr driver [ 4.279271] ehci-st: EHCI STMicroelectronics driver [ 4.284862] ehci-exynos: EHCI EXYNOS driver [ 4.289667] ehci-atmel: EHCI Atmel driver [ 4.294355] tegra-ehci: Tegra EHCI driver [ 4.299049] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.305363] ohci-pci: OHCI PCI platform driver [ 4.309968] ohci-platform: OHCI generic platform driver [ 4.315991] SPEAr-ohci: OHCI SPEAr driver [ 4.320658] ohci-st: OHCI STMicroelectronics driver [ 4.326245] ohci-atmel: OHCI Atmel driver [ 4.332865] usbcore: registered new interface driver usb-storage [ 4.345197] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 4.353767] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 4.354028] ata1: SATA link down (SStatus 0 SControl 300) [ 4.365394] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.365770] ahci-imx 2200000.sata: no device found, disabling link. [ 4.370834] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.376862] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.421539] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.430891] hub 1-0:1.0: USB hub found [ 4.435090] hub 1-0:1.0: 1 port detected [ 4.460446] i2c /dev entries driver [ 4.508369] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 4.528605] sdhci: Secure Digital Host Controller Interface driver [ 4.534880] sdhci: Copyright(c) Pierre Ossman [ 4.545129] Synopsys Designware Multimedia Card Interface Driver [ 4.556654] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.564127] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 4.604630] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 4.644566] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 4.652987] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 4.668279] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.683874] mmc0: new high speed SDHC card at address 1234 [ 4.690766] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 4.693688] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.712254] ledtrig-cpu: registered to indicate activity on CPUs [ 4.721241] usbcore: registered new interface driver usbhid [ 4.721564] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.726959] usbhid: USB HID core driver [ 4.754806] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 4.761932] IPv4 over IPsec tunneling driver [ 4.769834] NET: Registered protocol family 10 [ 4.778170] Segment Routing with IPv6 [ 4.784320] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.794451] NET: Registered protocol family 17 [ 4.799247] can: controller area network core (rev 20170425 abi 9) [ 4.805815] NET: Registered protocol family 29 [ 4.810303] can: raw protocol (rev 20170425) [ 4.814779] can: broadcast manager protocol (rev 20170425 t) [ 4.820498] can: netlink gateway (rev 20170425) max_hops=1 [ 4.826787] 8021q: 802.1Q VLAN Support v1.8 [ 4.831808] Key type dns_resolver registered [ 4.844457] ------------[ cut here ]------------ [ 4.846557] cpu cpu0: Linked as a consumer to regulator.4 [ 4.849103] WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x138/0x1f0 [ 4.849114] Modules linked in: [ 4.854908] cpu cpu0: Linked as a consumer to regulator.5 [ 4.863046] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.295-cip103 #1 [ 4.863052] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.863057] Backtrace: [ 4.863078] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 4.863089] r7:ffffffff r6:00000000 r5:60000093 r4:c1c9d72c [ 4.863110] [] (show_stack) from [] (dump_stack+0xe0/0x10c) [ 4.866443] cpu cpu0: Linked as a consumer to regulator.6 [ 4.871563] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) [ 4.871573] r9:60000093 r8:c1b084bc r7:00000000 r6:00000009 r5:00000000 r4:00000000 [ 4.871585] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) [ 4.871592] r6:c03b8c74 r5:0000000d r4:c1681ef4 [ 4.871606] [] (warn_slowpath_null) from [] (lock_acquire+0x138/0x1f0) [ 4.871616] r6:00000000 r5:00000000 r4:c1b05990 [ 4.883057] ThumbEE CPU extension supported. [ 4.884859] [] (lock_acquire) from [] (_raw_spin_lock+0x58/0x68) [ 4.884870] r10:eef9c2f8 r9:eef9c2f8 r8:00000001 r7:eefa0740 r6:00000001 r5:c23e9aec [ 4.887351] Registering SWP/SWPB emulation handler [ 4.891468] ------------[ cut here ]------------ [ 4.891485] WARNING: CPU: 3 PID: 0 at include/trace/events/lock.h:58 lock_release+0x364/0x370 [ 4.891491] Modules linked in: [ 4.894887] r4:c1b05980 [ 4.894904] [] (_raw_spin_lock) from [] (__tick_broadcast_oneshot_control+0x4c/0x2ac) [ 4.894909] r4:c1b01e88 [ 4.894921] [] (__tick_broadcast_oneshot_control) from [] (tick_broadcast_oneshot_control+0x3c/0x40) [ 4.894931] r9:eef9c2f8 r8:00000001 r7:c1b10e94 r6:c1b10ea4 r5:c1b10e44 r4:00000001 [ 4.894948] [] (tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x50/0x520) [ 4.894958] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) [ 4.894973] r10:eef9c2f8 r9:c1b10e44 r8:c1aa22f0 r7:c1b08500 r6:c1b10e44 r5:eef9c2f8 [ 4.903097] Loading compiled-in X.509 certificates [ 4.907942] r4:00000001 [ 4.907979] [] (cpuidle_enter) from [] (do_idle+0x20c/0x2f8) [ 4.907996] r7:c1b08500 r6:c1b084bc r5:00000000 r4:c1b00000 [ 5.074788] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) [ 5.082392] r10:c19e4a50 r9:00000001 r8:efffcac0 r7:c1b08480 r6:00000002 r5:c1b01f78 [ 5.090240] r4:000000ca [ 5.092812] [] (cpu_startup_entry) from [] (rest_init+0x2c8/0x2e0) [ 5.100768] [] (rest_init) from [] (start_kernel+0x468/0x4a4) [ 5.108273] r6:ffffffff r5:00000001 r4:c1cb9058 [ 5.112919] [] (start_kernel) from [<00000000>] ( (null)) [ 5.119302] r10:10c5387d r9:412fc09a r8:18ea6000 r7:00000000 r6:10c0387d r5:00000051 [ 5.127149] r4:c19004b0 [ 5.129704] irq event stamp: 15324 [ 5.129718] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.295-cip103 #1 [ 5.129730] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 5.133151] hardirqs last enabled at (15323): [] _raw_read_unlock_irqrestore+0x64/0x6c [ 5.133182] hardirqs last disabled at (15324): [] do_idle+0xb0/0x2f8 [ 5.139876] Backtrace: [ 5.146426] softirqs last enabled at (15316): [] __do_softirq+0x344/0x520 [ 5.155311] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 5.162537] softirqs last disabled at (15305): [] irq_exit+0x170/0x1c8 [ 5.164973] r7:ffffffff r6:00000000 r5:60000093 r4:c1c9d72c [ 5.172716] ---[ end trace d3c41935ed0bba43 ]--- [ 5.180312] [] (show_stack) from [] (dump_stack+0xe0/0x10c) [ 5.205305] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) [ 5.212816] r9:c03ff720 r8:00000003 r7:60000093 r6:00000009 r5:00000000 r4:00000000 [ 5.220590] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) [ 5.228788] r6:c03b8b30 r5:0000003a r4:c1681ef4 [ 5.233437] [] (warn_slowpath_null) from [] (lock_release+0x364/0x370) [ 5.241722] r6:c1b456c4 r5:c1b456c4 r4:c1b084bc [ 5.246375] [] (lock_release) from [] (ktime_get+0x84/0x1ac) [ 5.253796] r10:00000001 r9:60000093 r8:00000003 r7:c1b45700 r6:c1b456c4 r5:c03ff720 [ 5.261641] r4:c1b45600 [ 5.264204] [] (ktime_get) from [] (clockevents_program_event+0x6c/0x184) [ 5.272756] r10:eefcf2f8 r9:c23e9b00 r8:00000003 r7:24101100 r6:00000001 r5:00000001 [ 5.280600] r4:ee029c40 [ 5.283167] [] (clockevents_program_event) from [] (tick_broadcast_set_event+0x54/0xb4) [ 5.292928] r7:24101100 r6:00000001 r5:00000003 r4:ee029c40 [ 5.298619] [] (tick_broadcast_set_event) from [] (__tick_broadcast_oneshot_control+0x140/0x2ac) [ 5.309162] r7:eefd3740 r6:ee029c40 r5:00000000 r4:00000003 [ 5.314849] [] (__tick_broadcast_oneshot_control) from [] (tick_broadcast_oneshot_control+0x3c/0x40) [ 5.325744] r9:eefcf2f8 r8:00000001 r7:c1b10e94 r6:c1b10ea4 r5:c1b10e44 r4:00000001 [ 5.333517] [] (tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x50/0x520) [ 5.343371] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) [ 5.351661] r10:eefcf2f8 r9:c1b10e44 r8:c1aa22f0 r7:c1b08500 r6:c1b10e44 r5:eefcf2f8 [ 5.359504] r4:00000001 [ 5.362072] [] (cpuidle_enter) from [] (do_idle+0x20c/0x2f8) [ 5.369491] r7:c1b08500 r6:c1b084bc r5:00000003 r4:ee1e0000 [ 5.375181] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) [ 5.382775] r10:00000000 r9:412fc09a r8:1020406a r7:c1cb9650 r6:00000003 r5:ee1e0000 [ 5.390620] r4:00000089 [ 5.393192] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x170/0x17c) [ 5.402268] [] (secondary_start_kernel) from [<1030312c>] (0x1030312c) [ 5.409685] r7:c1cb9650 r6:10c0387d r5:00000051 r4:3e1c806a [ 5.415361] irq event stamp: 4316 [ 5.418709] hardirqs last enabled at (4315): [] _raw_read_unlock_irqrestore+0x64/0x6c [ 5.427521] hardirqs last disabled at (4316): [] do_idle+0xb0/0x2f8 [ 5.434686] softirqs last enabled at (4308): [] _local_bh_enable+0x34/0x68 [ 5.442539] softirqs last disabled at (4307): [] irq_enter+0x6c/0x94 [ 5.449778] ---[ end trace d3c41935ed0bba44 ]--- [ 5.467975] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 5.491987] hctosys: unable to open rtc device (rtc0) [ 5.516480] hub 1-1:1.0: USB hub found [ 5.521344] hub 1-1:1.0: 4 ports detected [ 5.545861] mmc2: new DDR MMC card at address 0001 [ 5.548847] Freeing unused kernel memory: 2048K [ 5.553626] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 5.561757] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 5.569489] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 5.576390] Run /init as init process [ 5.576720] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 5.590462] mmcblk2: p1 p2 Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.937756] udevd[111]: starting version 3.2.9 [ 5.945447] random: udevd: uninitialized urandom read (16 bytes read) [ 5.953390] random: udevd: uninitialized urandom read (16 bytes read) [ 5.960010] random: udevd: uninitialized urandom read (16 bytes read) [ 5.978319] udevd[111]: specified user 'tss' unknown [ 5.983899] udevd[111]: specified group 'tss' unknown [ 5.995977] udevd[112]: starting eudev-3.2.9 [ 6.974060] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.988517] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 7.002567] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 7.009177] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 7.031795] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 7.046079] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 7.052372] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 7.063817] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 [ 7.231976] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 7.238313] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 7.265329] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.290509] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: [ 7.910892] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 8.187073] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1002011/environment . /lava-1002011/environment / # /lava-1002011/bin/lava-test-runner /lava-1002011/0 /lava-1002011/bin/lava-test-runner /lava-1002011/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1002011/0/tests/0_dmesg + cat uuid + UUID=1002011_1.5.2.3.1[ 8.919459] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 9.034311] [ 9.135571] [ 9.234449] + set +x [ 9.245751] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1002011/environment / # . /lava-1002011/environment/lava-1002011/bin/lava-test-runner /lava-1002011/1 / # /lava-1002011/bin/lava-test-runner /lava-1002011/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1002011/1/tests/1_bootrr + cat uuid + UUID=1002011_1.5.2.3.5 [ 9.847307] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1002011/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1002011/1/../bin/lava-test-case [ 11.026162] /lava-1002011/1/../bin/lava-test-case [ 11.130549] /lava-1002011/1/../bin/lava-test-case [ 11.188164] + set +x [ 11.228583] / #