connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023939/tftp-deploy-bhwrpgvr/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023939/tftp-deploy-bhwrpgvr/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023939/tftp-deploy-bhwrpgvr/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023939/tftp-deploy-bhwrpgvr/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023939/tftp-deploy-bhwrpgvr/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023939/tftp-deploy-bhwrpgvr/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address d6:21:8d:47:fe:1d T eth0: DHCP client bound to address 10.8.254.39 Loading ARM Linux zImage '/mnt/tftp/1023939/tftp-deploy-bhwrpgvr/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1288e000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1023939/tftp-deploy-bhwrpgvr/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d85a2 Loading devicetree from '/mnt/tftp/1023939/tftp-deploy-bhwrpgvr/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1288e000, initrd at 0x18000000, oftree at 0x188d9000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.304-cip106 (KernelCI@build-j100102-arm-gcc-10-imx-v6-v7-defconfig-2wq2h) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Tue Feb 6 22:16:32 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978960K/2097152K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 52656K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000037] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001579] Console: colour dummy device 80x30 [ 0.001622] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001641] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001658] ... MAX_LOCK_DEPTH: 48 [ 0.001675] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001691] ... CLASSHASH_SIZE: 4096 [ 0.001709] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001725] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001742] ... CHAINHASH_SIZE: 32768 [ 0.001758] memory used by lock dependency info: 4655 kB [ 0.001774] per task-struct memory footprint: 1536 bytes [ 0.001873] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001900] CPU: Testing write buffer coherency: ok [ 0.001992] CPU0: Spectre v2: using BPIALL workaround [ 0.002012] pid_max: default: 32768 minimum: 301 [ 0.002366] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002401] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006607] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008795] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009357] rcu: Hierarchical SRCU implementation. [ 0.011363] smp: Bringing up secondary CPUs ... [ 0.013742] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013753] CPU1: Spectre v2: using BPIALL workaround [ 0.016412] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.016426] CPU2: Spectre v2: using BPIALL workaround [ 0.018558] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.018569] CPU3: Spectre v2: using BPIALL workaround [ 0.018930] smp: Brought up 1 node, 4 CPUs [ 0.018956] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.018976] CPU: All CPU(s) started in SVC mode. [ 0.021594] devtmpfs: initialized [ 0.044880] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.047240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.047306] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.051734] pinctrl core: initialized pinctrl subsystem [ 0.057053] NET: Registered protocol family 16 [ 0.074871] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077971] cpuidle: using governor menu [ 0.078187] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.093506] vdd1p1: supplied by regulator-dummy [ 0.094966] vdd3p0: supplied by regulator-dummy [ 0.096163] vdd2p5: supplied by regulator-dummy [ 0.097326] vddarm: supplied by regulator-dummy [ 0.098983] vddpu: supplied by regulator-dummy [ 0.099883] vddsoc: supplied by regulator-dummy [ 0.124780] No ATAGs? [ 0.125214] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.125322] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.127648] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.128463] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.186283] mxs-dma 110000.dma-apbh: initialized [ 0.189017] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.189045] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.189072] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.189096] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.189165] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.192166] vgaarb: loaded [ 0.193111] SCSI subsystem initialized [ 0.194309] usbcore: registered new interface driver usbfs [ 0.194531] usbcore: registered new interface driver hub [ 0.194668] usbcore: registered new device driver usb [ 0.197494] i2c i2c-0: IMX I2C adapter registered [ 0.197537] i2c i2c-0: can't use DMA, using PIO instead. [ 0.198852] i2c i2c-1: IMX I2C adapter registered [ 0.198890] i2c i2c-1: can't use DMA, using PIO instead. [ 0.200163] i2c i2c-2: IMX I2C adapter registered [ 0.200204] i2c i2c-2: can't use DMA, using PIO instead. [ 0.200466] media: Linux media interface: v0.10 [ 0.200569] videodev: Linux video capture interface: v2.00 [ 0.200992] pps_core: LinuxPPS API ver. 1 registered [ 0.201020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.201082] PTP clock support registered [ 0.201822] Advanced Linux Sound Architecture Driver Initialized. [ 0.205089] Bluetooth: Core ver 2.22 [ 0.205207] NET: Registered protocol family 31 [ 0.205228] Bluetooth: HCI device and connection manager initialized [ 0.205340] Bluetooth: HCI socket layer initialized [ 0.205374] Bluetooth: L2CAP socket layer initialized [ 0.205563] Bluetooth: SCO socket layer initialized [ 0.207541] clocksource: Switched to clocksource mxc_timer1 [ 0.418834] VFS: Disk quotas dquot_6.6.0 [ 0.418996] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.444973] NET: Registered protocol family 2 [ 0.445569] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.448039] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.448160] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.448309] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.449326] TCP: Hash tables configured (established 8192 bind 8192) [ 0.449995] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.450199] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.450814] NET: Registered protocol family 1 [ 0.452752] RPC: Registered named UNIX socket transport module. [ 0.452825] RPC: Registered udp transport module. [ 0.452847] RPC: Registered tcp transport module. [ 0.452869] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.455024] Trying to unpack rootfs image as initramfs... [ 1.405700] Freeing initrd memory: 9060K [ 1.406969] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.407748] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.412318] Initialise system trusted keyrings [ 1.413098] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.428224] NFS: Registering the id_resolver key type [ 1.428403] Key type id_resolver registered [ 1.428483] Key type id_legacy registered [ 1.428658] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.430025] fuse init (API version 7.27) [ 1.442729] Key type asymmetric registered [ 1.442892] Asymmetric key parser 'x509' registered [ 1.443120] bounce: pool size: 64 pages [ 1.443237] io scheduler noop registered [ 1.443263] io scheduler deadline registered [ 1.443603] io scheduler cfq registered (default) [ 1.443630] io scheduler mq-deadline registered [ 1.443654] io scheduler kyber registered [ 1.457721] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.458004] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.460148] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.460635] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.460857] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.461254] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.461715] PU : no governor for states [ 1.461770] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.465159] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.466023] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.466049] pfuze100-regulator 2-0008: pfuze100 found. [ 1.491680] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.456993] console [ttymxc0] enabled [ 2.463666] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.487785] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.494103] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.500313] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.506005] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.515354] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.523394] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.529590] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.538591] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.548670] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.555433] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.562221] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.569600] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.576341] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.583145] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.590794] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.599417] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.604352] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.613230] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.619980] [drm] No driver support for vblank timestamp query. [ 2.627357] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.635145] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.642944] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.650680] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.659215] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.673984] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.682451] [drm] Cannot find any crtc or sizes [ 2.690039] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.698103] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.724895] brd: module loaded [ 2.752050] loop: module loaded [ 2.757220] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.765232] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.773341] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.781587] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.792679] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.799778] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.808635] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.820985] scsi host0: ahci-imx [ 2.825762] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.841839] CAN device driver interface [ 2.848428] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.858396] pps pps0: new PPS source ptp0 [ 2.900391] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.908019] usbcore: registered new interface driver asix [ 2.913538] usbcore: registered new interface driver ax88179_178a [ 2.919805] usbcore: registered new interface driver cdc_ether [ 2.925734] usbcore: registered new interface driver net1080 [ 2.931529] usbcore: registered new interface driver cdc_subset [ 2.937586] usbcore: registered new interface driver zaurus [ 2.943317] usbcore: registered new interface driver cdc_ncm [ 2.949035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.955580] ehci-pci: EHCI PCI platform driver [ 2.960178] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.966314] usbcore: registered new interface driver usb-storage [ 2.976307] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.984792] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.994904] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.000485] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.037587] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.047028] hub 1-0:1.0: USB hub found [ 3.051148] hub 1-0:1.0: 1 port detected [ 3.066843] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.073373] i2c /dev entries driver [ 3.086685] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.093417] Bluetooth: HCI UART driver ver 2.3 [ 3.097929] Bluetooth: HCI UART protocol H4 registered [ 3.103170] Bluetooth: HCI UART protocol LL registered [ 3.109867] sdhci: Secure Digital Host Controller Interface driver [ 3.116069] sdhci: Copyright(c) Pierre Ossman [ 3.120484] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.127504] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.168076] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.169794] ata1: SATA link down (SStatus 0 SControl 300) [ 3.180949] ahci-imx 2200000.sata: no device found, disabling link. [ 3.187239] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.212014] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.220267] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.228402] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.240742] mmc0: new high speed SDHC card at address 1234 [ 3.251624] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.269838] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.281976] caam 2100000.caam: Entropy delay = 3200 [ 3.286905] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.337598] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.347668] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.352819] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.359327] caam 2100000.caam: job rings = 2, qi = 0 [ 3.384237] caam algorithms registered in /proc/crypto [ 3.395645] caam_jr 2101000.jr0: registering rng-caam [ 3.402471] usbcore: registered new interface driver usbhid [ 3.408207] usbhid: USB HID core driver [ 3.418383] imx-media: subdev ipu1_vdic bound [ 3.423217] imx-media: subdev ipu2_vdic bound [ 3.428225] imx-media: subdev ipu1_ic_prp bound [ 3.434736] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.442320] imx-media: subdev ipu1_ic_prpenc bound [ 3.448044] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.454989] imx-media: subdev ipu1_ic_prpvf bound [ 3.459951] imx-media: subdev ipu2_ic_prp bound [ 3.465132] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.472334] imx-media: subdev ipu2_ic_prpenc bound [ 3.477788] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.484774] imx-media: subdev ipu2_ic_prpvf bound [ 3.491185] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.497588] imx-media: subdev ipu1_csi0 bound [ 3.502659] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.508967] imx-media: subdev ipu1_csi1 bound [ 3.513499] mmc2: new DDR MMC card at address 0001 [ 3.514039] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.520729] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.524558] imx-media: subdev ipu2_csi0 bound [ 3.530665] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.534306] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.541141] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.545836] imx-media: subdev ipu2_csi1 bound [ 3.556724] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.564762] hub 1-1:1.0: USB hub found [ 3.566353] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.574912] hub 1-1:1.0: 4 ports detected [ 3.575149] mmcblk2: p1 p2 [ 3.575206] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.590176] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.600457] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.646622] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.656651] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.758132] [drm] Cannot find any crtc or sizes [ 4.060616] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.084591] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.096159] NET: Registered protocol family 10 [ 4.104095] Segment Routing with IPv6 [ 4.108097] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.115878] NET: Registered protocol family 17 [ 4.120441] can: controller area network core (rev 20170425 abi 9) [ 4.126815] NET: Registered protocol family 29 [ 4.131338] can: raw protocol (rev 20170425) [ 4.135759] can: broadcast manager protocol (rev 20170425 t) [ 4.141520] can: netlink gateway (rev 20170425) max_hops=1 [ 4.147679] Key type dns_resolver registered [ 4.153856] cpu cpu0: Linked as a consumer to regulator.4 [ 4.159562] cpu cpu0: Linked as a consumer to regulator.5 [ 4.165213] cpu cpu0: Linked as a consumer to regulator.6 [ 4.175530] Registering SWP/SWPB emulation handler [ 4.181907] ------------[ cut here ]------------ [ 4.182412] ------------[ cut here ]------------ [ 4.186560] WARNING: CPU: 1 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x11c/0x1c4 [ 4.191173] WARNING: CPU: 2 PID: 0 at include/trace/events/lock.h:58 lock_release+0x2f0/0x340 [ 4.199684] Modules linked in: [ 4.208204] Modules linked in: [ 4.211260] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.304-cip106 #1 [ 4.221005] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.227551] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.235309] [] (show_stack) from [] (dump_stack+0xe0/0x114) [ 4.242627] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) [ 4.250117] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) [ 4.258299] [] (warn_slowpath_null) from [] (lock_acquire+0x11c/0x1c4) [ 4.266571] [] (lock_acquire) from [] (_raw_spin_lock+0x28/0x38) [ 4.274325] [] (_raw_spin_lock) from [] (imx6q_enter_wait+0x18/0xac) [ 4.282425] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x16c/0x47c) [ 4.291134] [] (cpuidle_enter_state) from [] (do_idle+0x200/0x2d4) [ 4.299058] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 4.306633] [] (cpu_startup_entry) from [<101029ec>] (0x101029ec) [ 4.313596] irq event stamp: 8562 [ 4.313601] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.304-cip106 #1 [ 4.313606] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.316931] hardirqs last enabled at (8561): [] rcu_idle_exit+0x78/0x264 [ 4.323625] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.330143] hardirqs last disabled at (8562): [] do_idle+0x94/0x2d4 [ 4.337800] [] (show_stack) from [] (dump_stack+0xe0/0x114) [ 4.345541] softirqs last enabled at (8558): [] irq_enter+0x68/0x84 [ 4.352671] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) [ 4.359972] softirqs last disabled at (8557): [] irq_enter+0x54/0x84 [ 4.367191] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) [ 4.374666] ---[ end trace a9a188405028811d ]--- [ 4.381888] [] (warn_slowpath_null) from [] (lock_release+0x2f0/0x340) [ 4.402940] [] (lock_release) from [] (_raw_spin_unlock+0x18/0x24) [ 4.410864] [] (_raw_spin_unlock) from [] (imx6q_enter_wait+0x40/0xac) [ 4.419136] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x16c/0x47c) [ 4.427841] [] (cpuidle_enter_state) from [] (do_idle+0x200/0x2d4) [ 4.435766] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 4.443340] [] (cpu_startup_entry) from [<101029ec>] (0x101029ec) [ 4.450303] irq event stamp: 13354 [ 4.453714] hardirqs last enabled at (13353): [] rcu_idle_exit+0x78/0x264 [ 4.461461] hardirqs last disabled at (13354): [] do_idle+0x94/0x2d4 [ 4.468688] softirqs last enabled at (13350): [] irq_enter+0x68/0x84 [ 4.476000] softirqs last disabled at (13349): [] irq_enter+0x54/0x84 [ 4.483309] ---[ end trace a9a188405028811e ]--- [ 4.489415] Loading compiled-in X.509 certificates [ 4.561114] imx-media: subdev ipu1_csi0_mux bound [ 4.566630] imx-media: subdev ipu2_csi1_mux bound [ 4.571661] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.576571] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.581365] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.586441] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.591379] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.596119] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.601052] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.605791] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.610726] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.615459] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.620585] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.625916] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.631202] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.636532] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.641813] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.646723] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.661995] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.678038] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.687489] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.740989] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.749746] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.758793] ALSA device list: [ 4.761780] #0: imx6-wandboard-sgtl5000 [ 4.765799] #1: imx-spdif [ 4.769272] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.778066] cfg80211: failed to load regulatory.db [ 4.786095] Freeing unused kernel memory: 1024K [ 4.838452] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.117689] udevd[184]: starting version 3.2.9 [ 5.124563] random: udevd: uninitialized urandom read (16 bytes read) [ 5.131620] random: udevd: uninitialized urandom read (16 bytes read) [ 5.138345] random: udevd: uninitialized urandom read (16 bytes read) [ 5.154831] udevd[184]: specified user 'tss' unknown [ 5.160223] udevd[184]: specified group 'tss' unknown [ 5.171276] udevd[185]: starting eudev-3.2.9 [ 5.747407] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.759633] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.769746] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.780023] coda 2040000.vpu: firmware request failed done Saving random seed: [ 6.159587] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.367889] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1023939/environment . /lava-1023939/environment / # /lava-1023939/bin/lava-test-runner /lava-1023939/0 /lava-1023939/bin/lava-test-runner /lava-1023939/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1023939/0/tests/0_dmesg + cat uuid + UUID=1023939_1.5.2.3.1 [ 7.039999] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.128959] [ 7.206671] [ 7.285295] + set +x[ 7.296015] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1023939/environment / # . /lava-1023939/environment/lava-1023939/bin/lava-test-runner /lava-1023939/1 / # /lava-1023939/bin/lava-test-runner /lava-1023939/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1023939/1/tests/1_bootrr + cat uuid + UUID=1023939_1.5.2.3.5 [ 7.852710] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1023939/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1023939/1/../bin/lava-test-case [ 8.989817] /lava-1023939/1/../bin/lava-test-case [ 9.072437] /lava-1023939/1/../bin/lava-test-case [ 9.117950] + set +x[ 9.150321] / #