[Enter `^Ec?' for help] U-Boot 2021.10+dfsg-1+apertis10bv2023dev2b2 (Apr 18 2022 - 16:34:49 +0000) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPIFlash... SF: Detected gd25q16 with page size 256 Bytes, erase size 4 KiB, total 2 MiB OK In: serial Out: serial Err: serial Net: using phy at 7 FEC [PRIME], usb_ether Error: usb_ether address not set. starting USB... Bus usb@2184000: usb dr_mode not found Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.201.34 (8 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x10000000 13518508/tftp-deploy-s20vp4pm/kernel/zImage tftp 0x10000000 13518508/tftp-deploy-s20vp4pm/kernel/zImage Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.34 Filename '13518508/tftp-deploy-s20vp4pm/kernel/zImage'. Load address: 0x10000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.8 MiB/s done Bytes transferred = 10342912 (9dd200 hex) => tftp 0x14000000 13518508/tftp-deploy-s20vp4pm/ramdisk/ramdisk.cpio.gz.uboot tftp 0x14000000 13518508/tftp-deploy-s20vp4pm/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.34 Filename '13518508/tftp-deploy-s20vp4pm/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x14000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 14.1 MiB/s done Bytes transferred = 12325928 (bc1428 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x13f00000 13518508/tftp-deploy-s20vp4pm/dtb/imx6q-sabrelite.dtb tftp 0x13f00000 13518508/tftp-deploy-s20vp4pm/dtb/imx6q-sabrelite.dtb Using FEC device TFTP from server 192.168.201.1; our IP address is 192.168.201.34 Filename '13518508/tftp-deploy-s20vp4pm/dtb/imx6q-sabrelite.dtb'. Load address: 0x13f00000 Loading: *### 6.6 MiB/s done Bytes transferred = 41822 (a35e hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/13518508/extract-nfsrootfs-s9p4vmim,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/13518508/extract-nfsrootfs-s9p4vmim,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x10000000 0x14000000 0x13f00000 bootz 0x10000000 0x14000000 0x13f00000 Kernel image @ 0x10000000 [ 0x000000 - 0x9dd200 ] ## Loading init Ramdisk from Legacy Image at 14000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12325864 Bytes = 11.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 13f00000 Booting using the fdt blob at 0x13f00000 Using Device Tree in place at 13f00000, end 13f0d35d Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.312-cip109 (KernelCI@build-j176867-arm-gcc-10-multi-v7-defconfig-kselftest-2gpcc) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Thu Apr 25 12:54:31 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] OF: fdt: Reserved memory: unsupported node format, ignoring [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] percpu: Embedded 17 pages/cpu s40168 r8192 d21272 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.201.1:/var/lib/lava/dispatcher/tmp/13518508/extract-nfsrootfs-s9p4vmim,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 928524K/1048576K available (14336K kernel code, 1760K rwdata, 6296K rodata, 2048K init, 7702K bss, 54516K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (15328 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1761 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7703 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] ftrace: allocating 48546 entries in 190 pages <6>[ 0.000000] ftrace: allocated 190 pages with 6 groups <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008444] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021904] Console: colour dummy device 80x30 <4>[ 0.023790] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.031817] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.036160] ... MAX_LOCK_DEPTH: 48 <4>[ 0.040568] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.045178] ... CLASSHASH_SIZE: 4096 <4>[ 0.049820] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.054488] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.059214] ... CHAINHASH_SIZE: 32768 <4>[ 0.063884] memory used by lock dependency info: 4655 kB <4>[ 0.069567] per task-struct memory footprint: 1536 bytes <6>[ 0.075242] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.085668] CPU: Testing write buffer coherency: ok <6>[ 0.090771] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.096109] pid_max: default: 32768 minimum: 301 <6>[ 0.101255] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.107878] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.117906] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.123267] Setting up static identity map for 0x10300000 - 0x103000a0 <6>[ 0.130039] rcu: Hierarchical SRCU implementation. <6>[ 0.137147] EFI services will not be available. <6>[ 0.140029] smp: Bringing up secondary CPUs ... <6>[ 0.146287] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.146301] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.157881] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.157894] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.168791] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.168803] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.178008] smp: Brought up 1 node, 4 CPUs <6>[ 0.181911] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.188433] CPU: All CPU(s) started in SVC mode. <6>[ 0.195945] devtmpfs: initialized <6>[ 0.231372] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.239001] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.246711] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.257015] pinctrl core: initialized pinctrl subsystem <6>[ 0.264558] DMI not present or invalid. <6>[ 0.267776] NET: Registered protocol family 16 <6>[ 0.278883] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.289545] cpuidle: using governor menu <6>[ 0.291371] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.330699] vdd1p1: supplied by regulator-dummy <6>[ 0.334612] vdd3p0: supplied by regulator-dummy <6>[ 0.339256] vdd2p5: supplied by regulator-dummy <6>[ 0.343992] vddarm: supplied by regulator-dummy <6>[ 0.349468] vddpu: supplied by regulator-dummy <6>[ 0.353009] vddsoc: supplied by regulator-dummy <6>[ 0.404380] No ATAGs? <6>[ 0.404870] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.412932] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.429849] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.437843] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.461199] Serial: AMBA PL011 UART driver <6>[ 0.560425] mxs-dma 110000.dma-apbh: initialized <6>[ 0.586084] vgaarb: loaded <5>[ 0.589000] SCSI subsystem initialized <6>[ 0.591595] usbcore: registered new interface driver usbfs <6>[ 0.596245] usbcore: registered new interface driver hub <6>[ 0.601659] usbcore: registered new device driver usb <6>[ 0.611455] i2c i2c-0: IMX I2C adapter registered <6>[ 0.613610] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.621058] i2c i2c-1: IMX I2C adapter registered <6>[ 0.624133] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.631011] i2c i2c-2: IMX I2C adapter registered <6>[ 0.634661] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.644160] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.646599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.656040] PTP clock support registered <6>[ 0.660929] EDAC MC: Ver: 3.0.0 <6>[ 0.674305] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.936906] NET: Registered protocol family 2 <6>[ 0.939360] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.947956] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.953773] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.961242] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.969067] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.974961] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.980741] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.987846] NET: Registered protocol family 1 <6>[ 0.993613] RPC: Registered named UNIX socket transport module. <6>[ 0.998028] RPC: Registered udp transport module. <6>[ 1.002898] RPC: Registered tcp transport module. <6>[ 1.007913] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.016489] Trying to unpack rootfs image as initramfs... <6>[ 2.271224] Freeing initrd memory: 12040K <4>[ 2.273618] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 2.281200] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 2.296058] Initialise system trusted keyrings <6>[ 2.298755] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 2.332414] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.338350] NFS: Registering the id_resolver key type <5>[ 2.341134] Key type id_resolver registered <5>[ 2.345519] Key type id_legacy registered <6>[ 2.349854] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.361802] Key type asymmetric registered <5>[ 2.363386] Asymmetric key parser 'x509' registered <6>[ 2.368795] bounce: pool size: 64 pages <6>[ 2.372644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 2.380316] io scheduler noop registered <6>[ 2.384430] io scheduler deadline registered <6>[ 2.389368] io scheduler cfq registered (default) <6>[ 2.393867] io scheduler mq-deadline registered <6>[ 2.398697] io scheduler kyber registered <4>[ 2.403484] test_firmware: interface ready <6>[ 2.480018] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 2.485082] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 2.492399] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 2.499309] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 2.550439] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 2.554123] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 2.561829] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 2.568222] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 2.576172] PU : no governor for states <6>[ 2.579768] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <4>[ 2.610901] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 2.618100] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 2.802169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 2.818242] SuperH (H)SCI(F) driver initialized <6>[ 2.822330] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 27, base_baud = 5000000) is a IMX <6>[ 2.831832] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 74, base_baud = 5000000) is a IMX <6>[ 2.841022] console [ttymxc1] enabled <6>[ 2.841022] console [ttymxc1] enabled <6>[ 2.846117] bootconsole [ec_imx21] disabled <6>[ 2.846117] bootconsole [ec_imx21] disabled <6>[ 2.858862] msm_serial: driver initialized <6>[ 2.864056] STMicroelectronics ASC driver initialized <6>[ 2.874546] STM32 USART driver initialized <6>[ 2.893970] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 <4>[ 2.918127] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 2.927114] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 2.934426] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 2.941445] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 2.950789] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 2.958359] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 2.994121] brd: module loaded <6>[ 3.025840] loop: module loaded <6>[ 3.038758] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 3.047023] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 3.055377] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 3.063844] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <6>[ 3.075256] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 3.082532] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 3.091685] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 3.104750] scsi host0: ahci-imx <6>[ 3.110058] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 77 <6>[ 3.153494] CAN device driver interface <6>[ 3.160976] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <4>[ 3.169908] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 3.179235] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 3.189429] pps pps0: new PPS source ptp0 <6>[ 3.231635] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.240893] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 3.247089] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.253458] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 3.260751] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.282997] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.290857] usbcore: registered new interface driver pegasus <6>[ 3.297011] usbcore: registered new interface driver asix <6>[ 3.302798] usbcore: registered new interface driver ax88179_178a <6>[ 3.309323] usbcore: registered new interface driver cdc_ether <6>[ 3.315637] usbcore: registered new interface driver smsc75xx <6>[ 3.321830] usbcore: registered new interface driver smsc95xx <6>[ 3.328012] usbcore: registered new interface driver net1080 <6>[ 3.334056] usbcore: registered new interface driver cdc_subset <6>[ 3.340415] usbcore: registered new interface driver zaurus <6>[ 3.346736] usbcore: registered new interface driver cdc_ncm <6>[ 3.360983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.367851] ehci-pci: EHCI PCI platform driver <6>[ 3.372688] ehci-platform: EHCI generic platform driver <6>[ 3.379012] ehci-orion: EHCI orion driver <6>[ 3.383992] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.389011] ehci-st: EHCI STMicroelectronics driver <6>[ 3.394875] ehci-exynos: EHCI EXYNOS driver <6>[ 3.399977] ehci-atmel: EHCI Atmel driver <6>[ 3.404959] tegra-ehci: Tegra EHCI driver <6>[ 3.409923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.416488] ohci-pci: OHCI PCI platform driver <6>[ 3.421328] ohci-platform: OHCI generic platform driver <6>[ 3.427617] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.432556] ohci-st: OHCI STMicroelectronics driver <6>[ 3.438424] ohci-atmel: OHCI Atmel driver <6>[ 3.445369] usbcore: registered new interface driver usb-storage <6>[ 3.446742] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 3.457575] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 3.457852] imx_usb 2184000.usb: Linked as a consumer to regulator.9 <6>[ 3.464129] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <6>[ 3.480870] imx_usb 2184200.usb: Linked as a consumer to regulator.14 <6>[ 3.492697] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.498150] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.534383] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.543943] hub 1-0:1.0: USB hub found <6>[ 3.548402] hub 1-0:1.0: 1 port detected <6>[ 3.574573] i2c /dev entries driver <6>[ 3.624919] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 3.646034] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.652499] sdhci: Copyright(c) Pierre Ossman <6>[ 3.663224] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.675381] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.683131] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO <6>[ 3.688922] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO <6>[ 3.694789] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 <6>[ 3.738450] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <6>[ 3.747185] sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO <6>[ 3.753056] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 <6>[ 3.792981] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA <6>[ 3.811999] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.821220] usbcore: registered new interface driver usbhid <6>[ 3.827145] usbhid: USB HID core driver <6>[ 3.848136] ipip: IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.855523] IPv4 over IPsec tunneling driver <6>[ 3.863575] NET: Registered protocol family 10 <6>[ 3.870087] usb 1-1: new high-speed USB device number 2 using ci_hdrc <6>[ 3.878974] Segment Routing with IPv6 <6>[ 3.885375] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.889103] mmc0: new high speed SDHC card at address 0001 <6>[ 3.895681] NET: Registered protocol family 17 <6>[ 3.901857] mmcblk0: mmc0:0001 SD 14.8 GiB <6>[ 3.902191] can: controller area network core (rev 20170425 abi 9) <6>[ 3.913370] NET: Registered protocol family 29 <6>[ 3.918171] can: raw protocol (rev 20170425) <4>[ 3.922424] GPT:Primary header thinks Alt. header is not at the end of the disk. <6>[ 3.922886] can: broadcast manager protocol (rev 20170425 t) <4>[ 3.930613] GPT:7812499 != 30965759 <6>[ 3.936607] can: netlink gateway (rev 20170425) max_hops=1 <4>[ 3.940333] GPT:Alternate GPT header not at the end of the disk. <5>[ 3.947552] Key type dns_resolver registered <4>[ 3.952420] GPT:7812499 != 30965759 <4>[ 3.952432] GPT: Use GNU Parted to correct GPT errors. <6>[ 3.966333] mmcblk0: p1 p2 p3 <6>[ 3.973563] cpu cpu0: Linked as a consumer to regulator.4 <6>[ 3.979593] cpu cpu0: Linked as a consumer to regulator.5 <6>[ 3.985600] cpu cpu0: Linked as a consumer to regulator.6 <6>[ 3.995786] ThumbEE CPU extension supported. <5>[ 4.000371] Registering SWP/SWPB emulation handler <4>[ 4.004492] ------------[ cut here ]------------ <4>[ 4.005422] ------------[ cut here ]------------ <4>[ 4.005467] WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:58 lock_release+0x364/0x370 <4>[ 4.005483] Modules linked in: <5>[ 4.009881] Loading compiled-in X.509 certificates <4>[ 4.010399] WARNING: CPU: 2 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x138/0x1f0 <4>[ 4.015273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.312-cip109 #1 <4>[ 4.024054] Modules linked in: <4>[ 4.027380] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 4.058301] Backtrace: <4>[ 4.061058] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 4.068918] r7:ffffffff r6:00000000 r5:60000093 r4:c1b9cf88 <4>[ 4.074879] [] (show_stack) from [] (dump_stack+0xe0/0x10c) <4>[ 4.082481] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) <4>[ 4.090257] r9:c032d5c4 r8:c1ba5250 r7:60000093 r6:00000009 r5:00000000 r4:00000000 <4>[ 4.098293] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) <4>[ 4.106755] r6:c03b8ce0 r5:0000003a r4:c157e610 <4>[ 4.111671] [] (warn_slowpath_null) from [] (lock_release+0x364/0x370) <4>[ 4.120219] r6:00000001 r5:c1a10fd0 r4:c1a084bc <4>[ 4.125140] [] (lock_release) from [] (_raw_spin_unlock+0x28/0x4c) <4>[ 4.133347] r10:c1a084bc r9:00000001 r8:c1ba5250 r7:00000001 r6:00000001 r5:c1a084bc <4>[ 4.141453] r4:c1a10fc0 <4>[ 4.144298] [] (_raw_spin_unlock) from [] (imx6q_enter_wait+0x54/0xb4) <4>[ 4.152843] r5:c1a084bc r4:c1bba4b8 <4>[ 4.156721] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x188/0x518) <4>[ 4.165703] r7:ef79a338 r6:c1a10ce4 r5:c1a10c84 r4:00000001 <4>[ 4.171653] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) <4>[ 4.180208] r10:c1a10c84 r9:ef79a338 r8:c19a1330 r7:c1a08500 r6:c1a10c84 r5:ef79a338 <4>[ 4.188314] r4:00000001 <4>[ 4.191154] [] (cpuidle_enter) from [] (do_idle+0x220/0x2e0) <6>[ 4.193421] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <4>[ 4.198830] r7:c1a08500 r6:c1a084bc r5:00000000 r4:c1a00000 <4>[ 4.198859] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) <4>[ 4.198879] r10:c18e4a5c r9:00000001 r8:efffe8c0 r7:c1a08480 r6:00000002 r5:c1a01f78 <4>[ 4.198889] r4:000000cb <4>[ 4.198921] [] (cpu_startup_entry) from [] (rest_init+0x2c8/0x2e0) <4>[ 4.198948] [] (rest_init) from [] (start_kernel+0x468/0x4a4) <4>[ 4.198963] r6:ffffffff r5:00000001 r4:c1bb9058 <4>[ 4.198980] [] (start_kernel) from [<00000000>] ( (null)) <4>[ 4.199002] r10:10c5387d r9:412fc09a r8:13f00000 r7:00000eb9 r6:10c0387d r5:00000051 <4>[ 4.199012] r4:c18004b0 <4>[ 4.199026] irq event stamp: 8736 <4>[ 4.199038] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.312-cip109 #1 <4>[ 4.199063] hardirqs last enabled at (8735): [] _raw_read_unlock_irqrestore+0x64/0x6c <4>[ 4.199084] hardirqs last disabled at (8736): [] do_idle+0xb0/0x2e0 <4>[ 4.199114] softirqs last enabled at (8728): [] _local_bh_enable+0x34/0x68 <4>[ 4.199135] softirqs last disabled at (8727): [] irq_enter+0x6c/0x94 <4>[ 4.199146] ---[ end trace de48bd98e0581030 ]--- <6>[ 4.207598] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <4>[ 4.212408] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 4.212418] Backtrace: <4>[ 4.212454] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 4.212475] r7:ffffffff r6:00000000 r5:60000093 r4:c1b9cf88 <4>[ 4.212506] [] (show_stack) from [] (dump_stack+0xe0/0x10c) <6>[ 4.232220] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <4>[ 4.239561] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) <4>[ 4.239583] r9:60000093 r8:c1a084bc r7:00000000 r6:00000009 r5:00000000 r4:00000000 <4>[ 4.239606] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) <4>[ 4.239621] r6:c03b8e24 r5:0000000d r4:c157e610 <4>[ 4.239647] [] (warn_slowpath_null) from [] (lock_acquire+0x138/0x1f0) <4>[ 4.239662] r6:00000000 r5:00000000 r4:c1a10fd0 <4>[ 4.239692] [] (lock_acquire) from [] (_raw_spin_lock+0x58/0x68) <4>[ 4.239714] r10:c1a084bc r9:00000001 r8:c1ba5250 r7:00000001 r6:c1a10ce4 r5:c1a084bc <6>[ 4.248123] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.252346] r4:c1a10fc0 <4>[ 4.252395] [] (_raw_spin_lock) from [] (imx6q_enter_wait+0x30/0xb4) <4>[ 4.271068] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <4>[ 4.273464] r4:c1bba4b8 <4>[ 4.273495] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x188/0x518) <4>[ 4.273512] r7:ef7bc338 r6:c1a10ce4 r5:c1a10c84 r4:00000001 <4>[ 4.273531] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) <6>[ 4.281200] panel-simple panel-lcd: Linked as a consumer to regulator.0 <4>[ 4.289672] r10:c1a10c84 r9:ef7bc338 r8:c19a1330 r7:c1a08500 r6:c1a10c84 r5:ef7bc338 <4>[ 4.289683] r4:00000001 <4>[ 4.289716] [] (cpuidle_enter) from [] (do_idle+0x220/0x2e0) <4>[ 4.289733] r7:c1a08500 r6:c1a084bc r5:00000002 r4:ee9d6000 <4>[ 4.289761] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) <4>[ 4.289782] r10:00000000 r9:412fc09a r8:1020406a r7:c1bb9650 r6:00000002 r5:ee9d6000 <6>[ 4.297930] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.305278] r4:0000008a <4>[ 4.305313] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x170/0x17c) <4>[ 4.305338] [] (secondary_start_kernel) from [<1030312c>] (0x1030312c) <4>[ 4.305355] r7:c1bb9650 r6:10c0387d r5:00000051 r4:3e9c006a <4>[ 4.305365] irq event stamp: 4604 <4>[ 4.305409] hardirqs last enabled at (4603): [] tick_nohz_idle_enter+0x8c/0x108 <4>[ 4.322877] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <4>[ 4.324825] hardirqs last disabled at (4604): [] do_idle+0xb0/0x2e0 <4>[ 4.324848] softirqs last enabled at (4592): [] __do_softirq+0x344/0x520 <4>[ 4.324877] softirqs last disabled at (4579): [] irq_exit+0x170/0x1c8 <4>[ 4.324888] ---[ end trace de48bd98e0581031 ]--- <6>[ 4.380513] hub 1-1:1.0: USB hub found <6>[ 4.387838] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.392898] hub 1-1:1.0: 3 ports detected <6>[ 4.401481] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.633526] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C <6>[ 4.646532] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 4.654097] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.665630] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 4.673273] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.685269] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 4.694108] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 4.701326] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.712007] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 4.721244] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.728622] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.739129] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 4.746754] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.758063] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 4.765763] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.777686] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 4.786598] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 4.793764] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.804491] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 4.813674] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.821080] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.833769] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 4.841681] hctosys: unable to open rtc device (rtc0) <6>[ 4.851606] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 4.859324] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 4.870880] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 4.878602] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 4.890816] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 4.899709] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 4.906934] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 4.917650] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 4.926882] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 4.934218] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 4.967314] Micrel KSZ9021 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 4.983904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 8.096514] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 8.105074] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.134350] Sending DHCP requests ., OK <6>[ 8.178958] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.34 <6>[ 8.187415] IP-Config: Complete: <6>[ 8.190967] device=eth0, hwaddr=00:19:b8:08:f1:10, ipaddr=192.168.201.34, mask=255.255.255.0, gw=192.168.201.1 <6>[ 8.201737] host=imx6q-sabrelite-lava-cbg-4, domain=lava-rack, nis-domain=(none) <6>[ 8.209879] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 8.209885] nameserver0=192.168.201.1 <6>[ 8.258186] Freeing unused kernel memory: 2048K <6>[ 8.265108] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.22-1~deb12u1 <6>[ 12.344561] flexcan 2090000.flexcan: Linked as a consumer to regulator.10 <6>[ 12.361352] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 12.370168] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=35) <6>[ 12.395000] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 12.406726] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 12.415356] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 12.424094] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 12.436463] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 12.445526] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 12.460100] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 12.468808] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 12.480599] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 12.489956] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 12.494600] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) <6>[ 12.497546] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 12.503837] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 12.514324] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 12.524705] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 12.593131] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 12.635174] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 12.657640] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 12.671379] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 12.673207] sgtl5000 0-000a: Linked as a consumer to regulator.7 <6>[ 12.686828] sgtl5000 0-000a: Linked as a consumer to regulator.8 <6>[ 12.693181] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 12.699138] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 12.706598] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 12.716036] sgtl5000 0-000a: sgtl5000 revision 0x11 <6>[ 12.720929] panel-simple panel-lcd: Dropping the link to regulator.0 <6>[ 12.722458] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 <4>[ 12.732250] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 12.743914] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum <6>[ 12.744574] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 12.759756] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 12.770705] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 12.778362] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 12.790153] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 12.797923] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 12.810365] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 12.819308] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 12.826615] panel-simple panel-lcd: Dropping the link to regulator.0 <4>[ 12.837750] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator <6>[ 12.847043] panel-simple panel-lvds0: Linked as a consumer to regulator.0 <6>[ 12.854595] panel-simple panel-lvds0: Dropping the link to regulator.0 <6>[ 12.865592] pwm-backlight backlight-lcd: Linked as a consumer to regulator.8 <6>[ 12.873186] pwm-backlight backlight-lcd: Dropping the link to regulator.8 <6>[ 12.885298] pwm-backlight backlight-lvds: Linked as a consumer to regulator.8 <6>[ 12.893019] pwm-backlight backlight-lvds: Dropping the link to regulator.8 <4>[ 12.906333] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator <6>[ 12.915720] panel-simple panel-lcd: Linked as a consumer to regulator.0 <6>[ 12.923488] panel-simple panel-lcd: Dropping the link to regulator.0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address 00:19:b8:08:f1:10 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.201.1): address: 192.168.201.34 broadcast: 192.168.201.255 netmask: 255.255.255.0 gateway: 192.168.201.1 dns0 : 192.168.201.1 dns1 : 0.0.0.0 host : imx6q-sabrelite-lava-cbg-4 domain : lava-rack rootserver: 192.168.201.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 14.740378] systemd[1]: System time before build time, advancing clock. <3>[ 14.825886] cgroup: cgroup2: unknown option "memory_recursiveprot" <30>[ 14.866708] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <30>[ 14.899932] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 12 (bookworm)! <30>[ 14.960606] systemd[1]: Hostname set to . <30>[ 16.577208] systemd[1]: Queued start job for default target graphical.target. <30>[ 16.594584] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ OK ] Created slice system-getty.slice - Slice /system/getty. <30>[ 16.651219] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ OK ] Created slice system-modpr…lice - Slice /system/modprobe. <30>[ 16.701236] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ OK ] Created slice system-seria… - Slice /system/serial-getty. <30>[ 16.749514] systemd[1]: Created slice user.slice - User and Session Slice. [ OK ] Created slice user.slice - User and Session Slice. <30>[ 16.798458] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ OK ] Started systemd-ask-passwo…quests to Console Directory Watch. <30>[ 16.847606] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch. <30>[ 16.896004] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). <30>[ 16.916073] systemd[1]: Expecting device dev-ttymxc1.device - /dev/ttymxc1... Expecting device dev-ttymxc1.device - /dev/ttymxc1... <30>[ 16.954819] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes. <30>[ 16.995645] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ OK ] Reached target integrityse…Local Integrity Protected Volumes. <30>[ 17.045702] systemd[1]: Reached target paths.target - Path Units. [ OK ] Reached target paths.target - Path Units. <30>[ 17.085921] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ OK ] Reached target remote-fs.target - Remote File Systems. <30>[ 17.135390] systemd[1]: Reached target slices.target - Slice Units. [ OK ] Reached target slices.target - Slice Units. <30>[ 17.175023] systemd[1]: Reached target swap.target - Swaps. [ OK ] Reached target swap.target - Swaps. <30>[ 17.215619] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ OK ] Reached target veritysetup… - Local Verity Protected Volumes. <30>[ 17.268016] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe. <30>[ 17.376072] systemd[1]: systemd-journald-audit.socket - Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit). <30>[ 17.395538] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log). <30>[ 17.440613] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ OK ] Listening on systemd-journald.socket - Journal Socket. <30>[ 17.490322] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. [ OK ] Listening on systemd-netwo… - Network Service Netlink Socket. <30>[ 17.543708] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ OK ] Listening on systemd-udevd….socket - udev Control Socket. <30>[ 17.599400] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket. <30>[ 17.648270] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). <30>[ 17.664434] systemd[1]: dev-mqueue.mount - POSIX Message Queue File System was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/mqueue). <30>[ 17.688876] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... Mounting sys-kernel-debug.… - Kernel Debug File System... <30>[ 17.743950] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... Mounting sys-kernel-tracin… - Kernel Trace File System... <30>[ 17.794715] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... Starting kmod-static-nodes…ate List of Static Device Nodes... <30>[ 17.843260] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... Starting modprobe@configfs…m - Load Kernel Module configfs... <30>[ 17.893403] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod... <30>[ 17.943142] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... Starting modprobe@drm.service - Load Kernel Module drm... <30>[ 18.006211] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... Starting modprobe@efi_psto…- Load Kernel Module efi_pstore... <30>[ 18.055280] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... Starting modprobe@fuse.ser…e - Load Kernel Module fuse... <30>[ 18.114649] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... Starting modprobe@loop.ser…e - Load Kernel Module loop... <6>[ 18.157459] fuse init (API version 7.27) <30>[ 18.183922] systemd[1]: Starting systemd-journald.service - Journal Service... Starting systemd-journald.service - Journal Service... <30>[ 18.255425] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... Starting systemd-modules-l…rvice - Load Kernel Modules... <30>[ 18.309632] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... Starting systemd-network-g… units from Kernel command line... <30>[ 18.366554] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... Starting systemd-remount-f…nt Root and Kernel File Systems... <30>[ 18.432339] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... Starting systemd-udev-trig…[0m - Coldplug All udev Devices... <30>[ 18.521864] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System. <30>[ 18.566799] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ OK ] Mounted sys-kernel-tracing…nt - Kernel Trace File System. <30>[ 18.621384] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ OK ] Finished kmod-static-nodes…reate List of Static Device Nodes. <30>[ 18.680566] systemd[1]: modprobe@configfs.service: Deactivated successfully. <30>[ 18.691504] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs. <30>[ 18.740089] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. <30>[ 18.750756] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod. <30>[ 18.800568] systemd[1]: modprobe@drm.service: Deactivated successfully. <30>[ 18.810840] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ OK ] Finished modprobe@drm.service - Load Kernel Module drm. <30>[ 18.870106] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. <30>[ 18.880198] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore. <30>[ 18.910083] systemd[1]: modprobe@fuse.service: Deactivated successfully. <30>[ 18.919562] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse. <30>[ 18.967870] systemd[1]: Started systemd-journald.service - Journal Service. [ OK ] Started systemd-journald.service - Journal Service. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules. [ OK ] Finished systemd-network-g…rk units from Kernel command line. [ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems. [ OK ] Reached target network-pre…get - Preparation for Network. Mounting sys-fs-fuse-conne… - FUSE Control File System... Mounting sys-kernel-config…ernel Configuration File System... Starting systemd-journal-f…h Journal to Persistent Storage... Starting systemd-random-se…ice - Load/Save Random Seed... Starting systemd-sysctl.se…ce - Apply Kernel Variables... <46>[ 19.410682] systemd-journald[175]: Received client request to flush runtime journal. Starting systemd-sysusers.…rvice - Create System Users... [ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System. [ OK ] Mounted sys-kernel-config.… Kernel Configuration File System. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables. [ OK ] Finished systemd-sysusers.service - Create System Users. Starting systemd-tmpfiles-…ate Static Device Nodes in /dev... [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage. [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev. [ OK ] Reached target local-fs-pr…reparation for Local File Systems. [ OK ] Reached target local-fs.target - Local File Systems. Starting systemd-tmpfiles-… Volatile Files and Directories... Starting systemd-udevd.ser…ger for Device Events and Files... <5>[ 20.994933] random: crng init done [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories. [ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed. Starting systemd-timesyncd… - Network Time Synchronization... Starting systemd-update-ut…rd System Boot/Shutdown in UTMP... [ OK ] Started systemd-udevd.serv…nager for Device Events and Files. Starting systemd-networkd.…ice - Network Configuration... [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP. <5>[ 22.648929] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 23.183043] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 23.205838] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 23.237622] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 23.246834] cfg80211: failed to load regulatory.db [ OK ] Started systemd-timesyncd.…0m - Network Time Synchronization. [ OK ] Found device dev-ttymxc1.device - /dev/ttymxc1. <46>[ 23.538698] systemd-journald[175]: Oldest entry in /var/log/journal/80881e859f6941008967258213179f85/system.journal is older than the configured file retention duration (1month), suggesting rotation. <46>[ 23.590211] systemd-journald[175]: /var/log/journal/80881e859f6941008967258213179f85/system.journal: Journal header limits reached or header out-of-date, rotating. [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices. [ OK ] Started systemd-networkd.service - Network Configuration. [ OK ] Reached target network.target - Network. [ OK ] Reached target sysinit.target - System Initialization. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories. [ OK ] Reached target time-set.target - System Time Set. [ OK ] Started apt-daily.timer - Daily apt download activities. [ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities. [ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer. [ OK ] Started e2scrub_all.timer…etadata Check for All Filesystems. [ OK ] Started fstrim.timer - Discard unused blocks once a week. [ OK ] Reached target timers.target - Timer Units. [ OK ] Reached target usb-gadget.…m - Hardware activated USB gadget. [ OK ] Listening on dbus.socket[…- D-Bus System Message Bus Socket. [ OK ] Reached target sockets.target - Socket Units. [ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch. [ OK ] Reached target basic.target - Basic System. Starting dbus.service - D-Bus System Message Bus... Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots... Starting systemd-logind.se…ice - User Login Management... Starting systemd-user-sess…vice - Permit User Sessions... [ OK ] Finished systemd-user-sess…ervice - Permit User Sessions. [ OK ] Started dbus.service - D-Bus System Message Bus. [ OK ] Started getty@tty1.service - Getty on tty1. [ OK ] Started serial-getty@ttymx…ice - Serial Getty on ttymxc1. [ OK ] Reached target getty.target - Login Prompts. [ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots. [ OK ] Started systemd-logind.service - User Login Management. [ OK ] Reached target multi-user.target - Multi-User System. [ OK ] Reached target graphical.target - Graphical Interface. Starting systemd-update-ut… Record Runlevel Change in UTMP... [ OK ] Finished systemd-update-ut… - Record Runlevel Change in UTMP. Debian GNU/Linux 12 debian-bookworm-armhf ttymxc1 debian-bookworm-armhf login: root (automatic login) Linux debian-bookworm-armhf 4.19.312-cip109 #1 SMP Thu Apr 25 12:54:31 UTC 2024 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/13518508/extract-nfsrootfs-s9p4vmim' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/13518508/extract-nfsrootfs-s9p4vmim' / # export NFS_SERVER_IP='192.168.201.1' export NFS_SERVER_IP='192.168.201.1' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-13518508/environment . /lava-13518508/environment / # /lava-13518508/bin/lava-test-runner /lava-13518508/0 /lava-13518508/bin/lava-test-runner /lava-13518508/0 + export TESTRUN_ID=0_dmesg + cd /lava-13518508/0/tests/0_dmesg + cat uuid + UUID=13518508_1.6.2.4.1 <8>[ 37.776703] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 37.962613] <8>[ 38.112220] <6>[ 38.255997] usb_otg_vbus: disabling <6>[ 38.259948] CAN XCVR: disabling <8>[ 38.260113] + set +x<8>[ 38.277131] / #