connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1043277/tftp-deploy-a99wpwlq/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1043277/tftp-deploy-a99wpwlq/dtb/imx6dl-riotboard.dtb /mnt/tftp/1043277/tftp-deploy-a99wpwlq/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1043277/tftp-deploy-a99wpwlq/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1043277/tftp-deploy-a99wpwlq/dtb/imx6dl-riotboard.dtb /mnt/tftp/1043277/tftp-deploy-a99wpwlq/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address f2:14:3f:b0:d9:f9 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.92 Loading ARM Linux zImage '/mnt/tftp/1043277/tftp-deploy-a99wpwlq/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x129aa000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1043277/tftp-deploy-a99wpwlq/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18cb9d98 Loading devicetree from '/mnt/tftp/1043277/tftp-deploy-a99wpwlq/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x129aa000, initrd at 0x18000000, oftree at 0x18cba000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.312-cip109 (KernelCI@build-j176847-arm-gcc-10-multi-v7-defconfig-nl4lx) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Thu Apr 25 12:38:18 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536 [ 0.000000] pcpu-alloc: s36748 r8192 d20596 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 938196K/1048576K available (12288K kernel code, 1598K rwdata, 4688K rodata, 2048K init, 394K bss, 44844K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1599 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 395 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000026] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002684] Console: colour dummy device 80x30 [ 0.002732] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002745] CPU: Testing write buffer coherency: ok [ 0.002785] CPU0: Spectre v2: using BPIALL workaround [ 0.002794] pid_max: default: 32768 minimum: 301 [ 0.002928] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002950] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003891] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004596] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.006141] rcu: Hierarchical SRCU implementation. [ 0.008967] EFI services will not be available. [ 0.009135] smp: Bringing up secondary CPUs ... [ 0.009149] smp: Brought up 1 node, 1 CPU [ 0.009159] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.009167] CPU: All CPU(s) started in SVC mode. [ 0.010059] devtmpfs: initialized [ 0.016297] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.016669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.016691] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.018941] pinctrl core: initialized pinctrl subsystem [ 0.020604] DMI not present or invalid. [ 0.021375] NET: Registered protocol family 16 [ 0.024153] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.026138] cpuidle: using governor menu [ 0.026318] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.035623] vdd1p1: supplied by regulator-dummy [ 0.036155] vdd3p0: supplied by regulator-dummy [ 0.036672] vdd2p5: supplied by regulator-dummy [ 0.037187] vddarm: supplied by regulator-dummy [ 0.037847] vddpu: supplied by regulator-dummy [ 0.038234] vddsoc: supplied by regulator-dummy [ 0.050616] No ATAGs? [ 0.050672] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.050688] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.053634] imx6dl-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.053881] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.058253] Serial: AMBA PL011 UART driver [ 0.082190] mxs-dma 110000.dma-apbh: initialized [ 0.087836] vgaarb: loaded [ 0.088630] SCSI subsystem initialized [ 0.088856] libata version 3.00 loaded. [ 0.089080] usbcore: registered new interface driver usbfs [ 0.089127] usbcore: registered new interface driver hub [ 0.089174] usbcore: registered new device driver usb [ 0.090694] i2c i2c-0: IMX I2C adapter registered [ 0.090713] i2c i2c-0: can't use DMA, using PIO instead. [ 0.091180] i2c i2c-1: IMX I2C adapter registered [ 0.091197] i2c i2c-1: can't use DMA, using PIO instead. [ 0.091658] i2c i2c-3: IMX I2C adapter registered [ 0.091675] i2c i2c-3: can't use DMA, using PIO instead. [ 0.093111] pps_core: LinuxPPS API ver. 1 registered [ 0.093121] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.093141] PTP clock support registered [ 0.093369] EDAC MC: Ver: 3.0.0 [ 0.096070] clocksource: Switched to clocksource mxc_timer1 [ 0.155558] NET: Registered protocol family 2 [ 0.155904] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.156889] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.156927] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.157007] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.157143] TCP: Hash tables configured (established 8192 bind 8192) [ 0.157322] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.157363] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.157524] NET: Registered protocol family 1 [ 0.158128] RPC: Registered named UNIX socket transport module. [ 0.158140] RPC: Registered udp transport module. [ 0.158149] RPC: Registered tcp transport module. [ 0.158156] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.158172] PCI: CLS 0 bytes, default 64 [ 0.158618] Trying to unpack rootfs image as initramfs... [ 1.262315] Freeing initrd memory: 13032K [ 1.263064] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.264782] Initialise system trusted keyrings [ 1.265026] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.271140] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.271969] NFS: Registering the id_resolver key type [ 1.272039] Key type id_resolver registered [ 1.272048] Key type id_legacy registered [ 1.272094] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.274227] Key type asymmetric registered [ 1.274242] Asymmetric key parser 'x509' registered [ 1.274303] bounce: pool size: 64 pages [ 1.274352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.274365] io scheduler noop registered [ 1.274374] io scheduler deadline registered [ 1.274526] io scheduler cfq registered (default) [ 1.274538] io scheduler mq-deadline registered [ 1.274547] io scheduler kyber registered [ 1.305868] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.305942] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.306004] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.306168] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.306359] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.306376] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.306425] PU : no governor for states [ 1.306447] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.361984] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.365419] SuperH (H)SCI(F) driver initialized [ 1.366271] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 1.367170] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX [ 2.217291] console [ttymxc1] enabled [ 2.221605] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 2.230889] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 70, base_baud = 5000000) is a IMX [ 2.240152] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 71, base_baud = 5000000) is a IMX [ 2.249956] msm_serial: driver initialized [ 2.254293] STMicroelectronics ASC driver initialized [ 2.261015] STM32 USART driver initialized [ 2.282724] brd: module loaded [ 2.291614] loop: module loaded [ 2.307270] CAN device driver interface [ 2.312281] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.319512] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator [ 2.328232] fec 2188000.ethernet: Linked as a consumer to regulator.0 [ 2.336469] pps pps0: new PPS source ptp0 [ 2.366623] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.373670] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.379584] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.385568] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.392557] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.403397] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.410886] usbcore: registered new interface driver pegasus [ 2.416612] usbcore: registered new interface driver asix [ 2.422044] usbcore: registered new interface driver ax88179_178a [ 2.428193] usbcore: registered new interface driver cdc_ether [ 2.434068] usbcore: registered new interface driver smsc75xx [ 2.439888] usbcore: registered new interface driver smsc95xx [ 2.445669] usbcore: registered new interface driver net1080 [ 2.451386] usbcore: registered new interface driver cdc_subset [ 2.457358] usbcore: registered new interface driver zaurus [ 2.463001] usbcore: registered new interface driver cdc_ncm [ 2.471268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.477856] ehci-pci: EHCI PCI platform driver [ 2.482350] ehci-platform: EHCI generic platform driver [ 2.487869] ehci-orion: EHCI orion driver [ 2.492100] SPEAr-ehci: EHCI SPEAr driver [ 2.496321] ehci-st: EHCI STMicroelectronics driver [ 2.501368] ehci-exynos: EHCI EXYNOS driver [ 2.505708] ehci-atmel: EHCI Atmel driver [ 2.509906] tegra-ehci: Tegra EHCI driver [ 2.514120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.520348] ohci-pci: OHCI PCI platform driver [ 2.524841] ohci-platform: OHCI generic platform driver [ 2.530330] SPEAr-ohci: OHCI SPEAr driver [ 2.534512] ohci-st: OHCI STMicroelectronics driver [ 2.539591] ohci-atmel: OHCI Atmel driver [ 2.544530] usbcore: registered new interface driver usb-storage [ 2.552756] imx_usb 2184000.usb: Linked as a consumer to regulator.9 [ 2.564656] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.572948] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.582862] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.587813] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.616089] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.622199] hub 1-0:1.0: USB hub found [ 2.625997] hub 1-0:1.0: 1 port detected [ 2.635801] i2c /dev entries driver [ 2.652636] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.663285] sdhci: Secure Digital Host Controller Interface driver [ 2.669513] sdhci: Copyright(c) Pierre Ossman [ 2.675901] Synopsys Designware Multimedia Card Interface Driver [ 2.683690] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.690309] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.695477] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.700752] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 2.740452] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.748372] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.753546] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.758823] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 [ 2.796267] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.804185] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 [ 2.843603] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.854903] ledtrig-cpu: registered to indicate activity on CPUs [ 2.861963] usbcore: registered new interface driver usbhid [ 2.867625] usbhid: USB HID core driver [ 2.877174] NET: Registered protocol family 10 [ 2.882994] Segment Routing with IPv6 [ 2.886805] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.893276] NET: Registered protocol family 17 [ 2.897783] can: controller area network core (rev 20170425 abi 9) [ 2.904044] NET: Registered protocol family 29 [ 2.908519] can: raw protocol (rev 20170425) [ 2.912795] can: broadcast manager protocol (rev 20170425 t) [ 2.918479] can: netlink gateway (rev 20170425) max_hops=1 [ 2.924415] Key type dns_resolver registered [ 2.929634] cpu cpu0: Linked as a consumer to regulator.4 [ 2.935091] cpu cpu0: Linked as a consumer to regulator.5 [ 2.940601] cpu cpu0: Linked as a consumer to regulator.6 [ 2.946746] ThumbEE CPU extension supported. [ 2.951034] Registering SWP/SWPB emulation handler [ 2.958397] Loading compiled-in X.509 certificates [ 2.977705] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 2.988038] hctosys: unable to open rtc device (rtc0) [ 2.997906] Freeing unused kernel memory: 2048K [ 3.002788] Run /init as init process [ 3.026151] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.060236] mmc2: new DDR MMC card at address 0001 [ 3.068722] mmcblk2: mmc2:0001 MMC04G 3.58 GiB [ 3.074542] mmcblk2boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 3.081870] mmcblk2boot1: mmc2:0001 MMC04G partition 2 2.00 MiB Starting syslogd: [ 3.105484] mmcblk2rpmb: mmc2:0001 MMC04G partition 3 128 KiB, chardev (235:0) OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.197597] udevd[86]: starting version 3.2.9 [ 3.202781] random: udevd: uninitialized urandom read (16 bytes read) [ 3.209952] random: udevd: uninitialized urandom read (16 bytes read) [ 3.216625] random: udevd: uninitialized urandom read (16 bytes read) [ 3.230673] udevd[86]: specified user 'tss' unknown [ 3.235680] udevd[86]: specified group 'tss' unknown [ 3.242251] hub 1-1:1.0: USB hub found [ 3.247681] hub 1-1:1.0: 4 ports detected [ 3.257606] udevd[87]: starting eudev-3.2.9 [ 4.085496] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 4.140640] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 4.147165] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 4.248175] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 4.326885] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 4.483403] sgtl5000 0-000a: Linked as a consumer to regulator.7 [ 4.489541] sgtl5000 0-000a: Linked as a consumer to regulator.8 [ 4.558013] sgtl5000 0-000a: Error reading chip id -6 [ 4.563127] sgtl5000 0-000a: Dropping the link to regulator.7 [ 4.600774] sgtl5000 0-000a: Dropping the link to regulator.8 done Saving random seed: [ 5.130655] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 5.212568] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1043277/environment . /lava-1043277/environment / # /lava-1043277/bin/lava-test-runner /lava-1043277/0 /lava-1043277/bin/lava-test-runner /lava-1043277/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1043277/0/tests/0_dme[ 5.784922] sg + cat uuid + UUID=1043277_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 5.824126] [ 5.861421] [ 5.898981] + set +x [ 5.908705] / #