Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.1.4:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: UDOO Quad DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.142 (4020 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 359880/tftp-deploy-veogf0xd/kernel/zImage tftp 0x12000000 359880/tftp-deploy-veogf0xd/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.56.142 Filename '359880/tftp-deploy-veogf0xd/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 10.4 MiB/s done Bytes transferred = 10347008 (9de200 hex) => tftp 0x13000000 359880/tftp-deploy-veogf0xd/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 359880/tftp-deploy-veogf0xd/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.56.142 Filename '359880/tftp-deploy-veogf0xd/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 10.9 MiB/s done Bytes transferred = 15488655 (ec568f hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 359880/tftp-deploy-veogf0xd/dtb/imx6q-udoo.dtb tftp 0x18000000 359880/tftp-deploy-veogf0xd/dtb/imx6q-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.56.142 Filename '359880/tftp-deploy-veogf0xd/dtb/imx6q-udoo.dtb'. Load address: 0x18000000 Loading: *### 6.8 MiB/s done Bytes transferred = 35527 (8ac7 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x9de200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15488591 Bytes = 14.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800bac6 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.315-cip110 (KernelCI@build-j220663-arm-gcc-10-multi-v7-defconfig-kselftest-dqxz5) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Thu Jun 6 18:23:28 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Quad Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] percpu: Embedded 17 pages/cpu s40168 r8192 d21272 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 925468K/1048576K available (14336K kernel code, 1760K rwdata, 6296K rodata, 2048K init, 7702K bss, 57572K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (15328 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1761 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7703 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] ftrace: allocating 48567 entries in 190 pages <6>[ 0.000000] ftrace: allocated 190 pages with 6 groups <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008444] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021422] Console: colour dummy device 80x30 <4>[ 0.023307] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.031332] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.035676] ... MAX_LOCK_DEPTH: 48 <4>[ 0.040085] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.044694] ... CLASSHASH_SIZE: 4096 <4>[ 0.049334] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.054004] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.058730] ... CHAINHASH_SIZE: 32768 <4>[ 0.063401] memory used by lock dependency info: 4655 kB <4>[ 0.069082] per task-struct memory footprint: 1536 bytes <6>[ 0.074757] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.085183] CPU: Testing write buffer coherency: ok <6>[ 0.090320] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.095593] pid_max: default: 32768 minimum: 301 <6>[ 0.100803] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.107385] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.117400] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.122658] Setting up static identity map for 0x10300000 - 0x103000a0 <6>[ 0.129345] rcu: Hierarchical SRCU implementation. <6>[ 0.136194] EFI services will not be available. <6>[ 0.139023] smp: Bringing up secondary CPUs ... <6>[ 0.145239] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.145252] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.157111] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.157124] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.167891] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.167903] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.177169] smp: Brought up 1 node, 4 CPUs <6>[ 0.181089] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.187621] CPU: All CPU(s) started in SVC mode. <6>[ 0.195219] devtmpfs: initialized <6>[ 0.225738] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.233319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.241078] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.251370] pinctrl core: initialized pinctrl subsystem <6>[ 0.258883] DMI not present or invalid. <6>[ 0.262004] NET: Registered protocol family 16 <6>[ 0.272846] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.283368] cpuidle: using governor menu <6>[ 0.285204] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.317328] vdd1p1: supplied by regulator-dummy <6>[ 0.321236] vdd3p0: supplied by regulator-dummy <6>[ 0.325868] vdd2p5: supplied by regulator-dummy <6>[ 0.330598] vddarm: supplied by regulator-dummy <6>[ 0.336085] vddpu: supplied by regulator-dummy <6>[ 0.339619] vddsoc: supplied by regulator-dummy <6>[ 0.379462] No ATAGs? <6>[ 0.379957] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.388016] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.402757] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.410478] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.430508] Serial: AMBA PL011 UART driver <6>[ 0.523396] mxs-dma 110000.dma-apbh: initialized <6>[ 0.540309] vgaarb: loaded <5>[ 0.543097] SCSI subsystem initialized <6>[ 0.545896] usbcore: registered new interface driver usbfs <6>[ 0.550364] usbcore: registered new interface driver hub <6>[ 0.555958] usbcore: registered new device driver usb <6>[ 0.564788] i2c i2c-1: IMX I2C adapter registered <6>[ 0.566996] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.573895] i2c i2c-2: IMX I2C adapter registered <6>[ 0.577537] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.586140] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.588530] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.598023] PTP clock support registered <6>[ 0.602760] EDAC MC: Ver: 3.0.0 <6>[ 0.615210] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.875060] NET: Registered protocol family 2 <6>[ 0.877440] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.886172] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.891920] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.899383] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.907155] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.912974] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.918947] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.925997] NET: Registered protocol family 1 <6>[ 0.931774] RPC: Registered named UNIX socket transport module. <6>[ 0.936191] RPC: Registered udp transport module. <6>[ 0.941053] RPC: Registered tcp transport module. <6>[ 0.946068] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.954506] Trying to unpack rootfs image as initramfs... <6>[ 2.592277] Freeing initrd memory: 15128K <4>[ 2.594528] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 2.602115] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 2.616731] Initialise system trusted keyrings <6>[ 2.619456] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 2.653060] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.659057] NFS: Registering the id_resolver key type <5>[ 2.661731] Key type id_resolver registered <5>[ 2.666164] Key type id_legacy registered <6>[ 2.670487] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.682306] Key type asymmetric registered <5>[ 2.683891] Asymmetric key parser 'x509' registered <6>[ 2.689307] bounce: pool size: 64 pages <6>[ 2.693152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 2.700806] io scheduler noop registered <6>[ 2.704887] io scheduler deadline registered <6>[ 2.709917] io scheduler cfq registered (default) <6>[ 2.714370] io scheduler mq-deadline registered <6>[ 2.719204] io scheduler kyber registered <4>[ 2.723992] test_firmware: interface ready <4>[ 2.822521] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 2.826317] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 2.833860] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 2.840401] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 2.848258] PU : no governor for states <6>[ 2.851839] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <4>[ 2.878472] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 2.885658] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 3.070333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 3.085298] SuperH (H)SCI(F) driver initialized <6>[ 3.089442] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 62, base_baud = 5000000) is a IMX <6>[ 3.099199] console [ttymxc1] enabled <6>[ 3.099199] console [ttymxc1] enabled <6>[ 3.104221] bootconsole [ec_imx21] disabled <6>[ 3.104221] bootconsole [ec_imx21] disabled <6>[ 3.116864] msm_serial: driver initialized <6>[ 3.121885] STMicroelectronics ASC driver initialized <6>[ 3.131320] STM32 USART driver initialized <6>[ 3.148458] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 <6>[ 3.196492] brd: module loaded <6>[ 3.227240] loop: module loaded <6>[ 3.238590] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 3.246899] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 3.255251] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 3.263716] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <6>[ 3.275120] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 3.282485] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 3.291621] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 3.304498] scsi host0: ahci-imx <6>[ 3.309718] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 65 <6>[ 3.347777] CAN device driver interface <6>[ 3.354584] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <4>[ 3.363188] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 3.372411] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 3.380456] pps pps0: new PPS source ptp0 <6>[ 3.429202] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.437851] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 3.443970] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.450423] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 3.457719] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.476759] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.484568] usbcore: registered new interface driver pegasus <6>[ 3.490711] usbcore: registered new interface driver asix <6>[ 3.496543] usbcore: registered new interface driver ax88179_178a <6>[ 3.503020] usbcore: registered new interface driver cdc_ether <6>[ 3.509332] usbcore: registered new interface driver smsc75xx <6>[ 3.515569] usbcore: registered new interface driver smsc95xx <6>[ 3.521712] usbcore: registered new interface driver net1080 <6>[ 3.527807] usbcore: registered new interface driver cdc_subset <6>[ 3.534106] usbcore: registered new interface driver zaurus <6>[ 3.540195] usbcore: registered new interface driver cdc_ncm <6>[ 3.553087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.559974] ehci-pci: EHCI PCI platform driver <6>[ 3.564813] ehci-platform: EHCI generic platform driver <6>[ 3.570991] ehci-orion: EHCI orion driver <6>[ 3.575905] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.580718] ehci-st: EHCI STMicroelectronics driver <6>[ 3.586460] ehci-exynos: EHCI EXYNOS driver <6>[ 3.591440] ehci-atmel: EHCI Atmel driver <6>[ 3.596294] tegra-ehci: Tegra EHCI driver <6>[ 3.601129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.607693] ohci-pci: OHCI PCI platform driver <6>[ 3.612535] ohci-platform: OHCI generic platform driver <6>[ 3.618684] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.623513] ohci-st: OHCI STMicroelectronics driver <6>[ 3.629243] ohci-atmel: OHCI Atmel driver <6>[ 3.635736] usbcore: registered new interface driver usb-storage <6>[ 3.647265] imx_usb 2184200.usb: Linked as a consumer to regulator.7 <6>[ 3.647664] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 3.659649] ci_hdrc ci_hdrc.0: EHCI Host Controller <6>[ 3.659962] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 <6>[ 3.664909] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 3.678827] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <6>[ 3.695287] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 <6>[ 3.704837] hub 1-0:1.0: USB hub found <6>[ 3.709260] hub 1-0:1.0: 1 port detected <6>[ 3.731830] i2c /dev entries driver <6>[ 3.774218] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 3.792700] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.799232] sdhci: Copyright(c) Pierre Ossman <6>[ 3.808805] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.819757] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.827417] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO <6>[ 3.868004] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <6>[ 3.885041] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.893828] usbcore: registered new interface driver usbhid <6>[ 3.899748] usbhid: USB HID core driver <6>[ 3.917887] ipip: IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.925285] IPv4 over IPsec tunneling driver <6>[ 3.933333] NET: Registered protocol family 10 <6>[ 3.943374] Segment Routing with IPv6 <6>[ 3.949691] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.959891] NET: Registered protocol family 17 <6>[ 3.964660] can: controller area network core (rev 20170425 abi 9) <6>[ 3.971376] NET: Registered protocol family 29 <6>[ 3.976177] can: raw protocol (rev 20170425) <6>[ 3.980819] can: broadcast manager protocol (rev 20170425 t) <6>[ 3.986861] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 3.993857] Key type dns_resolver registered <6>[ 4.011321] cpu cpu0: Linked as a consumer to regulator.4 <4>[ 4.017191] ------------[ cut here ]------------ <6>[ 4.017426] cpu cpu0: Linked as a consumer to regulator.5 <4>[ 4.022097] WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x138/0x1f0 <4>[ 4.022105] Modules linked in: <6>[ 4.028090] cpu cpu0: Linked as a consumer to regulator.6 <4>[ 4.036557] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.315-cip110 #1 <4>[ 4.036563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 4.036568] Backtrace: <4>[ 4.036590] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 4.036600] r7:ffffffff r6:00000000 r5:60000093 r4:c1b9d048 <4>[ 4.036613] [] (show_stack) from [] (dump_stack+0xe0/0x10c) <4>[ 4.036630] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) <6>[ 4.044230] ThumbEE CPU extension supported. <4>[ 4.045606] r9:60000093 r8:c1a084bc r7:00000000 r6:00000009 r5:00000000 r4:00000000 <4>[ 4.045620] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) <4>[ 4.045627] r6:c03b8e24 r5:0000000d r4:c157e7e0 <4>[ 4.045640] [] (warn_slowpath_null) from [] (lock_acquire+0x138/0x1f0) <4>[ 4.045648] r6:00000000 r5:00000000 r4:c1a11090 <4>[ 4.045664] [] (lock_acquire) from [] (_raw_spin_lock+0x58/0x68) <4>[ 4.045676] r10:c1a084bc r9:00000001 r8:c1ba5310 r7:00000001 r6:c1a10da4 r5:c1a084bc <4>[ 4.046313] ------------[ cut here ]------------ <4>[ 4.046348] WARNING: CPU: 3 PID: 0 at include/trace/events/lock.h:58 lock_release+0x364/0x370 <4>[ 4.046358] Modules linked in: <5>[ 4.052722] Registering SWP/SWPB emulation handler <4>[ 4.059440] r4:c1a11080 <4>[ 4.059479] [] (_raw_spin_lock) from [] (imx6q_enter_wait+0x30/0xb4) <4>[ 4.059489] r4:c1bba4b8 <4>[ 4.059517] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x188/0x518) <4>[ 4.059533] r7:ef79f338 r6:c1a10da4 r5:c1a10d44 r4:00000001 <4>[ 4.059553] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) <4>[ 4.059575] r10:c1a10d44 r9:ef79f338 r8:c19a1330 r7:c1a08500 r6:c1a10d44 r5:ef79f338 <6>[ 4.063650] usb 1-1: new high-speed USB device number 2 using ci_hdrc <4>[ 4.070121] r4:00000001 <4>[ 4.070158] [] (cpuidle_enter) from [] (do_idle+0x220/0x2e0) <4>[ 4.070174] r7:c1a08500 r6:c1a084bc r5:00000000 r4:c1a00000 <4>[ 4.070199] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) <4>[ 4.070220] r10:c18e4a5c r9:00000001 r8:efffea00 r7:c1a08480 r6:00000002 r5:c1a01f78 <4>[ 4.070230] r4:000000cb <4>[ 4.070253] [] (cpu_startup_entry) from [] (rest_init+0x2c8/0x2e0) <4>[ 4.070279] [] (rest_init) from [] (start_kernel+0x468/0x4a4) <4>[ 4.070292] r6:ffffffff r5:00000001 r4:c1bb9058 <4>[ 4.070320] [] (start_kernel) from [<00000000>] ( (null)) <5>[ 4.080953] Loading compiled-in X.509 certificates <4>[ 4.083935] r10:10c5387d r9:412fc09a r8:18000000 r7:000012c0 r6:10c0387d r5:00000051 <4>[ 4.296931] r4:c18004b0 <4>[ 4.299748] irq event stamp: 5958 <4>[ 4.299763] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.315-cip110 #1 <4>[ 4.299776] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 4.303371] hardirqs last enabled at (5957): [] _raw_read_unlock_irqrestore+0x64/0x6c <4>[ 4.303403] hardirqs last disabled at (5958): [] do_idle+0xb0/0x2e0 <4>[ 4.310355] Backtrace: <4>[ 4.317169] softirqs last enabled at (5950): [] __do_softirq+0x344/0x520 <4>[ 4.326223] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 4.333623] softirqs last disabled at (5925): [] irq_exit+0x170/0x1c8 <4>[ 4.336318] r7:ffffffff r6:00000000 r5:60000093 r4:c1b9d048 <4>[ 4.344237] ---[ end trace c9f9c7c9bffbde73 ]--- <4>[ 4.352085] [] (show_stack) from [] (dump_stack+0xe0/0x10c) <4>[ 4.378035] [] (dump_stack) from [] (__warn.part.0+0xa8/0xd8) <4>[ 4.385810] r9:c032d5c4 r8:c1ba5310 r7:60000093 r6:00000009 r5:00000000 r4:00000000 <4>[ 4.393846] [] (__warn.part.0) from [] (warn_slowpath_null+0x54/0x5c) <4>[ 4.402306] r6:c03b8ce0 r5:0000003a r4:c157e7e0 <4>[ 4.407217] [] (warn_slowpath_null) from [] (lock_release+0x364/0x370) <4>[ 4.415763] r6:00000001 r5:c1a11090 r4:c1a084bc <4>[ 4.420677] [] (lock_release) from [] (_raw_spin_unlock+0x28/0x4c) <4>[ 4.428882] r10:c1a084bc r9:00000001 r8:c1ba5310 r7:00000001 r6:00000001 r5:c1a084bc <4>[ 4.436988] r4:c1a11080 <4>[ 4.439826] [] (_raw_spin_unlock) from [] (imx6q_enter_wait+0x54/0xb4) <4>[ 4.448370] r5:c1a084bc r4:c1bba4b8 <4>[ 4.452240] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x188/0x518) <4>[ 4.461222] r7:ef7d2338 r6:c1a10da4 r5:c1a10d44 r4:00000001 <4>[ 4.467169] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x40/0x4c) <4>[ 4.475723] r10:c1a10d44 r9:ef7d2338 r8:c19a1330 r7:c1a08500 r6:c1a10d44 r5:ef7d2338 <4>[ 4.483829] r4:00000001 <4>[ 4.486656] [] (cpuidle_enter) from [] (do_idle+0x220/0x2e0) <4>[ 4.494336] r7:c1a08500 r6:c1a084bc r5:00000003 r4:ee9d8000 <4>[ 4.500288] [] (do_idle) from [] (cpu_startup_entry+0x28/0x2c) <4>[ 4.508145] r10:00000000 r9:412fc09a r8:1020406a r7:c1bb9650 r6:00000003 r5:ee9d8000 <4>[ 4.516251] r4:0000008a <4>[ 4.519083] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x170/0x17c) <4>[ 4.528420] [] (secondary_start_kernel) from [<1030312c>] (0x1030312c) <4>[ 4.536101] r7:c1bb9650 r6:10c0387d r5:00000051 r4:3e9c006a <4>[ 4.542036] irq event stamp: 3644 <4>[ 4.545643] hardirqs last enabled at (3643): [] _raw_read_unlock_irqrestore+0x64/0x6c <4>[ 4.554716] hardirqs last disabled at (3644): [] do_idle+0xb0/0x2e0 <4>[ 4.562143] softirqs last enabled at (3636): [] _local_bh_enable+0x34/0x68 <4>[ 4.570260] softirqs last disabled at (3635): [] irq_enter+0x6c/0x94 <4>[ 4.577758] ---[ end trace c9f9c7c9bffbde74 ]--- <6>[ 4.586485] imx_thermal tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 4.601346] hctosys: unable to open rtc device (rtc0) <4>[ 4.644418] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 4.660511] mmc0: new high speed SDXC card at address 59b4 <6>[ 4.671146] mmcblk0: mmc0:59b4 SD128 119 GiB <6>[ 4.682661] mmcblk0: p1 p2 <6>[ 4.710855] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <6>[ 4.726474] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 4.781233] hub 1-1:1.0: USB hub found <6>[ 4.786161] hub 1-1:1.0: 4 ports detected <6>[ 5.115521] usb 1-1.3: new high-speed USB device number 3 using ci_hdrc <6>[ 7.847587] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 7.875624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.905279] Sending DHCP requests ..., OK <6>[ 14.290086] IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.142 <6>[ 14.298631] IP-Config: Complete: <6>[ 14.302179] device=eth0, hwaddr=00:c0:08:88:16:0e, ipaddr=192.168.56.142, mask=255.255.255.0, gw=192.168.56.254 <6>[ 14.313191] host=192.168.56.142, domain=mayfield.sirena.org.uk, nis-domain=(none) <6>[ 14.321511] bootserver=192.168.56.254, rootserver=192.168.56.254, rootpath= <6>[ 14.321526] nameserver0=192.168.56.254 <6>[ 14.333803] ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <6>[ 14.380966] Freeing unused kernel memory: 2048K <6>[ 14.405949] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 14.753577] udevd[105]: starting version 3.2.9 <5>[ 14.761779] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 14.770105] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 14.777092] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 14.795078] udevd[105]: specified user 'tss' unknown <27>[ 14.800660] udevd[105]: specified group 'tss' unknown <30>[ 14.812584] udevd[106]: starting eudev-3.2.9 <6>[ 15.677687] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 15.692285] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 15.703100] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) <6>[ 15.710114] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 15.747626] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 15.777621] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 15.784045] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 15.796816] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 1 done Saving random seed: <5>[ 16.503820] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 16.741876] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-359880/environment . /lava-359880/environment / # /lava-359880/bin/lava-test-runner /lava-359880/0 /lava-359880/bin/lava-test-runner /lava-359880/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-359880/0/tests/0_dmesg + cat uuid + UUID=359880_1.5.2.4.1<8>[ 17.463523] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 17.567116] <8>[ 17.660308] <8>[ 17.757023] + set +x <8>[ 17.768747] / #