connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCHTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\"global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048771/extract-nfsrootfs-6qfkpfcz,v3,tcp ip=dhcp'\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048771/extract-nfsrootfs-6qfkpfcz,v3,tcp ip=dhcp'\"bootm -v -o /mnt/tftp/1048771/tftp-deploy-22efuheo/dtb/imx28-duckbill.dtb /mnt/tftp/1048771/tftp-deploy-22efuheo/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -o /mnt/tftp/1048771/tftp-deploy-22efuheo/dtb/imx28-duckbill.dtb /mnt/tftp/1048771/tftp-deploy-22efuheo/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.76 Loading ARM Linux zImage '/mnt/tftp/1048771/tftp-deploy-22efuheo/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x416f3000 no initrd load address, defaulting to 0x41c8a000 Loading devicetree from '/mnt/tftp/1048771/tftp-deploy-22efuheo/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048771/extract-nfsrootfs-6qfkpfcz,v3,tcp ip=dhcp Starting kernel at 0x416f3000, oftree at 0x41c8a000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.315-cip110 (KernelCI@build-j220635-arm-gcc-10-mxs-defconfig-2jw24) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Thu Jun 6 18:16:08 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Malformed early option 'earlycon' [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048771/extract-nfsrootfs-6qfkpfcz,v3,tcp ip=dhcp [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 112508K/131072K available (6613K kernel code, 556K rwdata, 2156K rodata, 300K init, 7446K bss, 18564K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (6615 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 300 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 557 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7447 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000037] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.002139] Console: colour dummy device 80x30 [ 0.002291] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002357] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002413] ... MAX_LOCK_DEPTH: 48 [ 0.002468] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002522] ... CLASSHASH_SIZE: 4096 [ 0.002579] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002634] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002689] ... CHAINHASH_SIZE: 32768 [ 0.002745] memory used by lock dependency info: 4655 kB [ 0.002799] per task-struct memory footprint: 1536 bytes [ 0.003075] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.071289] CPU: Testing write buffer coherency: ok [ 0.071761] pid_max: default: 32768 minimum: 301 [ 0.072680] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.072795] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089131] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.098277] devtmpfs: initialized [ 0.144224] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.144452] futex hash table entries: 256 (order: 1, 11264 bytes) [ 0.145484] pinctrl core: initialized pinctrl subsystem [ 0.161080] NET: Registered protocol family 16 [ 0.164067] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.331827] Serial: AMBA PL011 UART driver [ 0.334642] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 229, base_baud = 0) is a PL011 rev2 [ 0.661731] console [ttyAMA0] enabled [ 0.746308] mxs-dma 80004000.dma-apbh: initialized [ 0.763402] mxs-dma 80024000.dma-controller: initialized [ 0.774773] SCSI subsystem initialized [ 0.781289] usbcore: registered new interface driver usbfs [ 0.787780] usbcore: registered new interface driver hub [ 0.793555] usbcore: registered new device driver usb [ 0.805832] pps_core: LinuxPPS API ver. 1 registered [ 0.811099] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.820510] PTP clock support registered [ 0.827188] Advanced Linux Sound Architecture Driver Initialized. [ 0.842010] clocksource: Switched to clocksource mxs_timer [ 1.419929] NET: Registered protocol family 2 [ 1.425860] IP idents hash table entries: 2048 (order: 2, 16384 bytes) [ 1.436549] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes) [ 1.444699] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.451842] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 1.458996] TCP: Hash tables configured (established 1024 bind 1024) [ 1.466727] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.473263] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.481084] NET: Registered protocol family 1 [ 1.492400] RPC: Registered named UNIX socket transport module. [ 1.498615] RPC: Registered udp transport module. [ 1.503616] RPC: Registered tcp transport module. [ 1.508414] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.529271] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.611546] NFS: Registering the id_resolver key type [ 1.618290] Key type id_resolver registered [ 1.622999] Key type id_legacy registered [ 1.627643] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.660908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.668891] io scheduler noop registered (default) [ 1.674018] io scheduler mq-deadline registered [ 1.678656] io scheduler kyber registered [ 1.691399] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 228, base_baud = 1500000) is a 8006a000.serial [ 1.703727] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 1.741133] fec 800f0000.ethernet: Linked as a consumer to regulator.1 [ 1.821783] usbcore: registered new interface driver asix [ 1.827864] usbcore: registered new interface driver ax88179_178a [ 1.834654] usbcore: registered new interface driver cdc_ether [ 1.841056] usbcore: registered new interface driver smsc95xx [ 1.847437] usbcore: registered new interface driver net1080 [ 1.853729] usbcore: registered new interface driver cdc_subset [ 1.860069] usbcore: registered new interface driver zaurus [ 1.866593] usbcore: registered new interface driver cdc_ncm [ 1.872557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.879668] usbcore: registered new interface driver usb-storage [ 1.912777] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as rtc0 [ 1.921829] i2c /dev entries driver [ 1.935546] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 1.948267] mxs-mmc 80010000.ssp: Linked as a consumer to regulator.1 [ 1.985892] mxs-mmc 80010000.ssp: initialized [ 2.006237] mxs-dcp 80028000.dcp: Failed to register sha1 hash! [ 2.016288] mxs-dcp: probe of 80028000.dcp failed with error -22 [ 2.030946] usbcore: registered new interface driver usbhid [ 2.036830] usbhid: USB HID core driver [ 2.051898] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.074545] mmc0: new high speed SDHC card at address 1234 [ 2.088631] NET: Registered protocol family 17 [ 2.101588] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.107851] Key type dns_resolver registered [ 2.127145] registered taskstats version 1 [ 2.147663] mmcblk0: p1 [ 2.230570] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01 00:00:09 UTC (9) [ 2.353584] SMSC LAN8710/LAN8720 800f0000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.ethernet-1:00, irq=POLL) [ 4.464789] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.502274] Sending DHCP requests ., OK [ 4.546200] IP-Config: Got DHCP answer from 10.8.254.2, my address is 10.8.254.76 [ 4.553959] IP-Config: Complete: [ 4.557292] device=eth0, hwaddr=00:04:9f:06:00:04, ipaddr=10.8.254.76, mask=255.255.255.0, gw=255.255.255.255 [ 4.567886] host=10.8.254.76, domain=, nis-domain=(none) [ 4.573885] bootserver=10.8.254.2, rootserver=10.8.254.2, rootpath= [ 4.573919] nameserver0=10.8.254.2 [ 4.590181] ALSA device list: [ 4.593462] No soundcards found. [ 4.601363] uart-pl011 80074000.serial: no DMA platform data [ 4.703919] VFS: Mounted root (nfs filesystem) on device 0:13. [ 4.715220] devtmpfs: mounted [ 4.720525] Freeing unused kernel memory: 300K [ 4.725292] This architecture does not have kernel memory protection. [ 4.731823] Run /sbin/init as init process [ 4.880081] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 4.880081] [ 4.889331] CPU: 0 PID: 1 Comm: init Not tainted 4.19.315-cip110 #1 [ 4.895664] Hardware name: Freescale MXS (Device Tree) [ 4.900931] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.908784] [] (show_stack) from [] (panic+0xe0/0x270) [ 4.915753] [] (panic) from [] (do_exit+0x91c/0x958) [ 4.922537] [] (do_exit) from [] (do_group_exit+0x38/0xbc) [ 4.929844] [] (do_group_exit) from [] (get_signal+0x118/0x860) [ 4.937584] [] (get_signal) from [] (do_signal+0xe8/0x4c4) [ 4.944891] [] (do_signal) from [] (do_work_pending+0xd4/0xfc) [ 4.952546] [] (do_work_pending) from [] (slow_work_pending+0xc/0x20) [ 4.960789] Exception stack(0xc7835fb0 to 0xc7835ff8) [ 4.965911] 5fa0: bea07f10 00000000 00000000 00000000 [ 4.974161] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 0000da58 00000000 [ 4.982404] 5fe0: 00000000 bea07f10 b6fe9570 b6fe9bc0 00000030 ffffffff [ 4.989125] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004