Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.1.4:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: UDOO Quad DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.6.32 (3783 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 758772/tftp-deploy-yzcnzl4h/kernel/zImage tftp 0x12000000 758772/tftp-deploy-yzcnzl4h/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.32; sending through gateway 192.168.6.1 Filename '758772/tftp-deploy-yzcnzl4h/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 4.6 MiB/s done Bytes transferred = 8489304 (818958 hex) => tftp 0x13000000 758772/tftp-deploy-yzcnzl4h/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 758772/tftp-deploy-yzcnzl4h/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.32; sending through gateway 192.168.6.1 Filename '758772/tftp-deploy-yzcnzl4h/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 4.6 MiB/s done Bytes transferred = 9261381 (8d5145 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 758772/tftp-deploy-yzcnzl4h/dtb/imx6q-udoo.dtb tftp 0x18000000 758772/tftp-deploy-yzcnzl4h/dtb/imx6q-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.32; sending through gateway 192.168.6.1 Filename '758772/tftp-deploy-yzcnzl4h/dtb/imx6q-udoo.dtb'. Load address: 0x18000000 Loading: *### 3.8 MiB/s done Bytes transferred = 35527 (8ac7 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x818958 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9261317 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800bac6 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.322-cip113 (KernelCI@build-j319717-arm-gcc-12-imx-v6-v7-defconfig-rjsnn) (gcc version 12.2.0 (Debian 12.2.0-14)) #1 SMP Tue Sep 24 10:34:21 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Quad Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 939648K/1048576K available (11264K kernel code, 881K rwdata, 3616K rodata, 1024K init, 7651K bss, 43392K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 882 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008444] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.019964] Console: colour dummy device 80x30 <4>[ 0.023052] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.031087] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.035404] ... MAX_LOCK_DEPTH: 48 <4>[ 0.039867] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.044452] ... CLASSHASH_SIZE: 4096 <4>[ 0.049085] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.053760] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.058480] ... CHAINHASH_SIZE: 32768 <4>[ 0.063157] memory used by lock dependency info: 4655 kB <4>[ 0.068834] per task-struct memory footprint: 1536 bytes <6>[ 0.074526] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.084935] CPU: Testing write buffer coherency: ok <6>[ 0.090070] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.095349] pid_max: default: 32768 minimum: 301 <6>[ 0.100575] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.107134] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.118231] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.123349] Setting up static identity map for 0x10100000 - 0x10100078 <6>[ 0.128711] rcu: Hierarchical SRCU implementation. <6>[ 0.134794] smp: Bringing up secondary CPUs ... <6>[ 0.140319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.140332] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.151737] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.151749] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.162393] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.162405] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.171938] smp: Brought up 1 node, 4 CPUs <6>[ 0.175950] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.182494] CPU: All CPU(s) started in SVC mode. <6>[ 0.190301] devtmpfs: initialized <6>[ 0.211939] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.219493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.227280] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 0.237388] pinctrl core: initialized pinctrl subsystem <6>[ 0.245303] NET: Registered protocol family 16 <6>[ 0.263994] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.271432] cpuidle: using governor menu <6>[ 0.273004] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.292600] vdd1p1: supplied by regulator-dummy <6>[ 0.295979] vdd3p0: supplied by regulator-dummy <6>[ 0.300573] vdd2p5: supplied by regulator-dummy <6>[ 0.305303] vddarm: supplied by regulator-dummy <6>[ 0.310623] vddpu: supplied by regulator-dummy <6>[ 0.314450] vddsoc: supplied by regulator-dummy <6>[ 0.337573] No ATAGs? <6>[ 0.338018] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.346037] hw-breakpoint: maximum watchpoint size is 4 bytes. <4>[ 0.354110] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory <6>[ 0.362428] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver <6>[ 0.424511] mxs-dma 110000.dma-apbh: initialized <6>[ 0.431264] vgaarb: loaded <5>[ 0.432302] SCSI subsystem initialized <6>[ 0.436626] usbcore: registered new interface driver usbfs <6>[ 0.441309] usbcore: registered new interface driver hub <6>[ 0.446865] usbcore: registered new device driver usb <6>[ 0.454905] i2c i2c-1: IMX I2C adapter registered <6>[ 0.457099] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.463858] i2c i2c-2: IMX I2C adapter registered <6>[ 0.467635] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.473399] media: Linux media interface: v0.10 <6>[ 0.478038] videodev: Linux video capture interface: v2.00 <6>[ 0.484078] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.488913] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.498338] PTP clock support registered <6>[ 0.503156] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.511843] Bluetooth: Core ver 2.22 <6>[ 0.512918] NET: Registered protocol family 31 <6>[ 0.517580] Bluetooth: HCI device and connection manager initialized <6>[ 0.524243] Bluetooth: HCI socket layer initialized <6>[ 0.529331] Bluetooth: L2CAP socket layer initialized <6>[ 0.534775] Bluetooth: SCO socket layer initialized <6>[ 0.541882] clocksource: Switched to clocksource mxc_timer1 <5>[ 0.752141] VFS: Disk quotas dquot_6.6.0 <6>[ 0.753630] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.785908] NET: Registered protocol family 2 <6>[ 0.788161] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.797139] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.802831] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.810093] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.817814] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.824043] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.829694] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.836778] NET: Registered protocol family 1 <6>[ 0.842754] RPC: Registered named UNIX socket transport module. <6>[ 0.846941] RPC: Registered udp transport module. <6>[ 0.851956] RPC: Registered tcp transport module. <6>[ 0.856852] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.865536] Trying to unpack rootfs image as initramfs... <6>[ 1.706095] Freeing initrd memory: 9048K <4>[ 1.708524] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 1.715586] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 1.727729] Initialise system trusted keyrings <6>[ 1.730375] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.751206] NFS: Registering the id_resolver key type <5>[ 1.754044] Key type id_resolver registered <5>[ 1.758131] Key type id_legacy registered <6>[ 1.762596] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 1.770090] fuse init (API version 7.27) <5>[ 1.784897] Key type asymmetric registered <5>[ 1.786562] Asymmetric key parser 'x509' registered <6>[ 1.791714] bounce: pool size: 64 pages <6>[ 1.795817] io scheduler noop registered <6>[ 1.799819] io scheduler deadline registered <6>[ 1.804659] io scheduler cfq registered (default) <6>[ 1.809304] io scheduler mq-deadline registered <6>[ 1.814128] io scheduler kyber registered <4>[ 1.831544] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <4>[ 1.834233] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set <6>[ 1.838810] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 1.845328] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc <4>[ 1.860480] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set <6>[ 1.866993] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 <4>[ 1.874863] PU : no governor for states <6>[ 1.878484] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc <6>[ 1.889188] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 62, base_baud = 5000000) is a IMX <6>[ 1.898405] console [ttymxc1] enabled <6>[ 1.898405] console [ttymxc1] enabled <6>[ 1.903483] bootconsole [ec_imx21] disabled <6>[ 1.903483] bootconsole [ec_imx21] disabled <6>[ 1.930333] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) <6>[ 1.936869] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) <6>[ 1.943313] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) <6>[ 1.949262] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 1.968250] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 1.987106] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 1.993548] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 2.002926] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 <6>[ 2.013960] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 2.021237] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 2.028247] [drm] No driver support for vblank timestamp query. <6>[ 2.035979] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) <6>[ 2.043949] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) <6>[ 2.051946] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) <6>[ 2.059862] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) <6>[ 2.068662] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 2.083983] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) <6>[ 2.092876] [drm] Cannot find any crtc or sizes <6>[ 2.100664] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 <6>[ 2.108975] imx-ipuv3 2800000.ipu: IPUv3H probed <6>[ 2.134779] brd: module loaded <6>[ 2.159911] loop: module loaded <6>[ 2.165121] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 2.173423] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 2.181709] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 2.190209] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <6>[ 2.201470] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 2.208808] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 2.217934] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 2.230657] scsi host0: ahci-imx <6>[ 2.235687] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 65 <6>[ 2.251383] CAN device driver interface <4>[ 2.257916] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator <6>[ 2.267114] fec 2188000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.275136] pps pps0: new PPS source ptp0 <6>[ 2.316255] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.323883] usbcore: registered new interface driver asix <6>[ 2.329642] usbcore: registered new interface driver ax88179_178a <6>[ 2.336151] usbcore: registered new interface driver cdc_ether <6>[ 2.342385] usbcore: registered new interface driver net1080 <6>[ 2.348394] usbcore: registered new interface driver cdc_subset <6>[ 2.354706] usbcore: registered new interface driver zaurus <6>[ 2.360671] usbcore: registered new interface driver cdc_ncm <6>[ 2.366646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 2.373489] ehci-pci: EHCI PCI platform driver <6>[ 2.378305] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 2.384665] usbcore: registered new interface driver usb-storage <6>[ 2.394422] imx_usb 2184200.usb: Linked as a consumer to regulator.7 <6>[ 2.405336] ci_hdrc ci_hdrc.0: EHCI Host Controller <6>[ 2.411154] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 <6>[ 2.441923] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 <6>[ 2.451864] hub 1-0:1.0: USB hub found <6>[ 2.456150] hub 1-0:1.0: 1 port detected <6>[ 2.471573] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 <6>[ 2.478322] i2c /dev entries driver <6>[ 2.490123] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) <6>[ 2.498005] Bluetooth: HCI UART driver ver 2.3 <6>[ 2.502786] Bluetooth: HCI UART protocol H4 registered <6>[ 2.508288] Bluetooth: HCI UART protocol LL registered <6>[ 2.515116] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.521572] sdhci: Copyright(c) Pierre Ossman <6>[ 2.526248] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.533516] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO <6>[ 2.574173] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 2.574594] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA <6>[ 2.580280] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 2.592039] caam 2100000.caam: Entropy delay = 3200 <6>[ 2.594243] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <6>[ 2.660038] caam 2100000.caam: Instantiated RNG4 SH0 <6>[ 2.720798] caam 2100000.caam: Instantiated RNG4 SH1 <6>[ 2.726093] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) <6>[ 2.732859] caam 2100000.caam: job rings = 2, qi = 0 <6>[ 2.754041] caam algorithms registered in /proc/crypto <6>[ 2.765629] caam_jr 2101000.jr0: registering rng-caam <6>[ 2.772721] usbcore: registered new interface driver usbhid <6>[ 2.778608] usbhid: USB HID core driver <4>[ 2.788649] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.788836] imx-media: subdev ipu1_vdic bound <6>[ 2.802517] imx-media: subdev ipu2_vdic bound <6>[ 2.807628] imx-media: subdev ipu1_ic_prp bound <6>[ 2.808345] mmc0: new high speed SDXC card at address 59b4 <6>[ 2.813972] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 <6>[ 2.822021] mmcblk0: mmc0:59b4 SD128 119 GiB <6>[ 2.826035] imx-media: subdev ipu1_ic_prpenc bound <6>[ 2.836604] mmcblk0: p1 p2 <6>[ 2.836772] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 <6>[ 2.847123] imx-media: subdev ipu1_ic_prpvf bound <6>[ 2.852336] imx-media: subdev ipu2_ic_prp bound <6>[ 2.857665] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 <6>[ 2.865120] imx-media: subdev ipu2_ic_prpenc bound <6>[ 2.870715] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 <6>[ 2.877975] imx-media: subdev ipu2_ic_prpvf bound <6>[ 2.881947] usb 1-1: new high-speed USB device number 2 using ci_hdrc <6>[ 2.884416] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 <6>[ 2.896511] imx-media: subdev ipu1_csi0 bound <6>[ 2.901873] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 <6>[ 2.908510] imx-media: subdev ipu1_csi1 bound <6>[ 2.913844] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 <6>[ 2.920330] imx-media: subdev ipu2_csi0 bound <6>[ 2.925642] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 <6>[ 2.932161] imx-media: subdev ipu2_csi1 bound <6>[ 2.946682] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered <4>[ 2.957279] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 2.971938] NET: Registered protocol family 10 <6>[ 2.980110] Segment Routing with IPv6 <6>[ 2.984393] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.992471] NET: Registered protocol family 17 <6>[ 2.997222] can: controller area network core (rev 20170425 abi 9) <6>[ 3.003876] NET: Registered protocol family 29 <6>[ 3.008611] can: raw protocol (rev 20170425) <6>[ 3.013354] can: broadcast manager protocol (rev 20170425 t) <6>[ 3.019320] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 3.025781] Key type dns_resolver registered <6>[ 3.032304] cpu cpu0: Linked as a consumer to regulator.4 <6>[ 3.038207] cpu cpu0: Linked as a consumer to regulator.5 <4>[ 3.041932] ------------[ cut here ]------------ <6>[ 3.044262] cpu cpu0: Linked as a consumer to regulator.6 <4>[ 3.048775] WARNING: CPU: 3 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x114/0x1b8 <4>[ 3.048783] Modules linked in: <5>[ 3.059368] Registering SWP/SWPB emulation handler <4>[ 3.062188] ------------[ cut here ]------------ <4>[ 3.062204] WARNING: CPU: 1 PID: 0 at include/trace/events/lock.h:58 lock_release+0x2e8/0x334 <4>[ 3.062208] Modules linked in: <4>[ 3.062220] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.322-cip113 #1 <4>[ 3.062225] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 3.062249] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 3.062267] [] (show_stack) from [] (dump_stack+0xe0/0x114) <4>[ 3.062285] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) <4>[ 3.062298] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) <4>[ 3.062309] [] (warn_slowpath_null) from [] (lock_release+0x2e8/0x334) <4>[ 3.062324] [] (lock_release) from [] (_raw_spin_unlock+0x18/0x24) <4>[ 3.062342] [] (_raw_spin_unlock) from [] (imx6q_enter_wait+0x40/0xac) <4>[ 3.062357] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x16c/0x47c) <4>[ 3.062373] [] (cpuidle_enter_state) from [] (do_idle+0x214/0x2e4) <4>[ 3.062386] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) <4>[ 3.062396] [] (cpu_startup_entry) from [<10102a0c>] (0x10102a0c) <4>[ 3.062402] irq event stamp: 9020 <4>[ 3.062414] hardirqs last enabled at (9019): [] tick_nohz_idle_enter+0x8c/0x110 <4>[ 3.062422] hardirqs last disabled at (9020): [] do_idle+0x90/0x2e4 <4>[ 3.062434] softirqs last enabled at (9012): [] __do_softirq+0x2c8/0x4ec <4>[ 3.062451] softirqs last disabled at (8999): [] irq_exit+0x13c/0x1c8 <4>[ 3.062478] ---[ end trace d33752e699c70452 ]--- <4>[ 3.063239] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G W 4.19.322-cip113 #1 <4>[ 3.063248] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 3.063285] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 3.063314] [] (show_stack) from [] (dump_stack+0xe0/0x114) <4>[ 3.063344] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) <4>[ 3.063371] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) <4>[ 3.063403] [] (warn_slowpath_null) from [] (lock_acquire+0x114/0x1b8) <5>[ 3.069820] Loading compiled-in X.509 certificates <4>[ 3.071788] [] (lock_acquire) from [] (_raw_spin_lock+0x28/0x38) <4>[ 3.071823] [] (_raw_spin_lock) from [] (imx6q_enter_wait+0x18/0xac) <6>[ 3.219830] imx-media: subdev ipu1_csi0_mux bound <4>[ 3.226750] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x16c/0x47c) <4>[ 3.226785] [] (cpuidle_enter_state) from [] (do_idle+0x214/0x2e4) <4>[ 3.226812] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) <4>[ 3.226835] [] (cpu_startup_entry) from [<10102a0c>] (0x10102a0c) <4>[ 3.226847] irq event stamp: 12192 <4>[ 3.226883] hardirqs last enabled at (12191): [] rcu_idle_exit+0x78/0x25c <4>[ 3.226910] hardirqs last disabled at (12192): [] do_idle+0x90/0x2e4 <6>[ 3.233860] imx-media: subdev ipu2_csi1_mux bound <4>[ 3.240317] softirqs last enabled at (12184): [] irq_enter+0x68/0x84 <4>[ 3.240344] softirqs last disabled at (12183): [] irq_enter+0x54/0x84 <6>[ 3.247702] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 <4>[ 3.255140] ---[ end trace d33752e699c70454 ]--- <6>[ 3.256444] [drm] Cannot find any crtc or sizes <6>[ 3.262955] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 <6>[ 3.263025] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 <6>[ 3.310131] hub 1-1:1.0: USB hub found <6>[ 3.314672] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 <6>[ 3.314686] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 <6>[ 3.332080] hub 1-1:1.0: 4 ports detected <6>[ 3.339928] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 <6>[ 3.435677] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 <6>[ 3.440680] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 <6>[ 3.445910] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 <6>[ 3.450906] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 <6>[ 3.456297] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 <6>[ 3.461928] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 <6>[ 3.467433] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 <6>[ 3.473073] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 <6>[ 3.478578] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 <6>[ 3.483775] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 <6>[ 3.497232] imx_thermal tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 3.567030] fsl-asoc-card sound: ac97-hifi <-> 2028000.ssi mapping ok <3>[ 3.574022] fsl-asoc-card sound: ASoC: no sink widget found for Playback <3>[ 3.581150] fsl-asoc-card sound: ASoC: Failed to add route AC97 Playback -> direct -> Playback <3>[ 3.590100] fsl-asoc-card sound: ASoC: no source widget found for Capture <3>[ 3.597215] fsl-asoc-card sound: ASoC: Failed to add route Capture -> direct -> AC97 Capture <6>[ 3.612788] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) <6>[ 3.712046] usb 1-1.3: new high-speed USB device number 3 using ci_hdrc <6>[ 3.728828] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <6>[ 3.744664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 6.885139] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 6.893695] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.921887] Sending DHCP requests .., OK <6>[ 10.186402] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.32 <6>[ 10.194551] IP-Config: Complete: <6>[ 10.198091] device=eth0, hwaddr=00:c0:08:88:16:0e, ipaddr=192.168.6.32, mask=255.255.255.0, gw=192.168.6.1 <6>[ 10.208551] host=192.168.6.32, domain=, nis-domain=(none) <6>[ 10.214756] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 10.214767] nameserver0=10.255.253.1 <5>[ 10.227785] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 10.281651] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 10.291319] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 10.301709] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.310849] ALSA device list: <6>[ 10.314170] #0: ac97-audio <6>[ 10.319547] cfg80211: failed to load regulatory.db <6>[ 10.327219] Freeing unused kernel memory: 1024K <6>[ 10.412790] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.674488] udevd[180]: starting version 3.2.9 <5>[ 10.680967] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.688497] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.695457] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 10.711695] udevd[180]: specified user 'tss' unknown <27>[ 10.717248] udevd[180]: specified group 'tss' unknown <30>[ 10.727914] udevd[181]: starting eudev-3.2.9 <4>[ 11.241400] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 <4>[ 11.268077] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 <4>[ 11.278960] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 <3>[ 11.291666] coda 2040000.vpu: firmware request failed done Saving random seed: <5>[ 11.960255] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 12.145095] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-758772/environment . /lava-758772/environment / # /lava-758772/bin/lava-test-runner /lava-758772/0 /lava-758772/bin/lava-test-runner /lava-758772/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-758772/0/tests/0_dmesg + cat uuid + UUID=758772_1.5.2.4.1 <8>[ 12.828516] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.911325] <8>[ 12.983525] <8>[ 13.056211] + set +x <8>[ 13.066928] / #