Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.2 (4 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 842612/tftp-deploy-4cxw68pc/kernel/zImage tftp 0x82000000 842612/tftp-deploy-4cxw68pc/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.2 Filename '842612/tftp-deploy-4cxw68pc/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 5.1 MiB/s done Bytes transferred = 6661712 (65a650 hex) => tftp 0x83000000 842612/tftp-deploy-4cxw68pc/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 842612/tftp-deploy-4cxw68pc/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.2 Filename '842612/tftp-deploy-4cxw68pc/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################### 5.2 MiB/s done Bytes transferred = 11041718 (a87bb6 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 842612/tftp-deploy-4cxw68pc/dtb/am335x-boneblack.dtb tftp 0x88000000 842612/tftp-deploy-4cxw68pc/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.2 Filename '842612/tftp-deploy-4cxw68pc/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *### 4 MiB/s done Bytes transferred = 33561 (8319 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-02-07 5:21:21 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 11041654 Bytes = 10.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b318 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-cip72-rt42 (KernelCI@build-j993384-arm-gcc-10-multi-v7-defconfig-preempt-rt-whgkr) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP PREEMPT RT Tue Feb 7 04:49:20 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] Malformed early option 'earlycon' [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @df98c000 s16672 r8192 d24288 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 425656K/522240K available (8714K kernel code, 1024K rwdata, 3900K rodata, 1028K init, 325K bss, 31048K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e5a984 (12619 kB) [ 0.000000] .init : 0xc0e5b000 - 0xc0f5c000 (1028 kB) [ 0.000000] .data : 0xc0f5c000 - 0xc105c140 (1025 kB) [ 0.000000] .bss : 0xc105f000 - 0xc10b04b4 ( 326 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000026] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000032] OMAP clocksource: timer1 at 24000000 Hz [ 0.002824] clocksource_probe: no matching clocksources found [ 0.002998] Console: colour dummy device 80x30 [ 0.059313] Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464) [ 0.059318] pid_max: default: 32768 minimum: 301 [ 0.059446] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.059452] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060209] CPU: Testing write buffer coherency: ok [ 0.060218] CPU0: Spectre v2: using BPIALL workaround [ 0.060544] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.060661] Setting up static identity map for 0x80209000 - 0x80209098 [ 0.104359] Brought up 1 CPUs [ 0.104384] SMP: Total of 1 processors activated (997.78 BogoMIPS). [ 0.104394] CPU: All CPU(s) started in SVC mode. [ 0.105808] devtmpfs: initialized [ 0.118247] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.138781] omap_hwmod: debugss: _wait_target_disable failed [ 0.180856] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.180895] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.188173] pinctrl core: initialized pinctrl subsystem [ 0.190890] NET: Registered protocol family 16 [ 0.194970] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.209356] cpuidle: using governor ladder [ 0.224341] cpuidle: using governor menu [ 0.230968] OMAP GPIO hardware version 0.1 [ 0.243201] No ATAGs? [ 0.243234] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.247651] Serial: AMBA PL011 UART driver [ 0.300553] edma 49000000.edma: TI EDMA DMA engine driver [ 0.304261] vgaarb: loaded [ 0.305578] SCSI subsystem initialized [ 0.309902] usbcore: registered new interface driver usbfs [ 0.309983] usbcore: registered new interface driver hub [ 0.310043] usbcore: registered new device driver usb [ 0.310928] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.310979] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.311663] pps_core: LinuxPPS API ver. 1 registered [ 0.311675] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.311708] PTP clock support registered [ 0.311939] EDAC MC: Ver: 3.0.0 [ 0.319663] clocksource: Switched to clocksource timer1 [ 0.332882] NET: Registered protocol family 2 [ 0.333097] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 0.333850] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.333917] TCP bind hash table entries: 4096 (order: 4, 114688 bytes) [ 0.334046] TCP: Hash tables configured (established 4096 bind 4096) [ 0.334125] UDP hash table entries: 256 (order: 2, 16384 bytes) [ 0.334156] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) [ 0.334377] NET: Registered protocol family 1 [ 0.339996] RPC: Registered named UNIX socket transport module. [ 0.340014] RPC: Registered udp transport module. [ 0.340022] RPC: Registered tcp transport module. [ 0.340030] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.340710] Unpacking initramfs... [ 1.126735] Freeing initrd memory: 10784K [ 1.127202] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.149386] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.155906] NFS: Registering the id_resolver key type [ 1.155980] Key type id_resolver registered [ 1.155991] Key type id_legacy registered [ 1.156076] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.158451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.158480] io scheduler noop registered [ 1.158497] io scheduler deadline registered [ 1.158917] io scheduler cfq registered (default) [ 1.163681] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 1.247622] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.250764] SuperH (H)SCI(F) driver initialized [ 1.251646] msm_serial: driver initialized [ 1.252265] omap_uart 44e09000.serial: no wakeirq for uart0 [ 1.252501] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0 [ 1.927298] console [ttyO0] enabled [ 1.931499] STMicroelectronics ASC driver initialized [ 1.938457] [drm] Initialized drm 1.1.0 20060810 [ 1.993842] loop: module loaded [ 2.005798] CAN device driver interface [ 2.011119] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.018439] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.079691] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.086147] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.114254] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.126108] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 [ 2.135264] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.143240] usbcore: registered new interface driver pegasus [ 2.149272] usbcore: registered new interface driver asix [ 2.155022] usbcore: registered new interface driver ax88179_178a [ 2.161474] usbcore: registered new interface driver cdc_ether [ 2.167674] usbcore: registered new interface driver smsc75xx [ 2.173801] usbcore: registered new interface driver smsc95xx [ 2.179921] usbcore: registered new interface driver net1080 [ 2.185915] usbcore: registered new interface driver cdc_subset [ 2.192192] usbcore: registered new interface driver zaurus [ 2.198152] usbcore: registered new interface driver cdc_ncm [ 2.206007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.212907] ehci-pci: EHCI PCI platform driver [ 2.217662] ehci-platform: EHCI generic platform driver [ 2.223363] ehci-omap: OMAP-EHCI Host Controller driver [ 2.229051] ehci-orion: EHCI orion driver [ 2.233420] SPEAr-ehci: EHCI SPEAr driver [ 2.237780] ehci-st: EHCI STMicroelectronics driver [ 2.243049] ehci-exynos: EHCI EXYNOS driver [ 2.247601] ehci-atmel: EHCI Atmel driver [ 2.251958] tegra-ehci: Tegra EHCI driver [ 2.256327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.262860] ohci-pci: OHCI PCI platform driver [ 2.267602] ohci-platform: OHCI generic platform driver [ 2.273271] ohci-omap3: OHCI OMAP3 driver [ 2.277664] SPEAr-ohci: OHCI SPEAr driver [ 2.282023] ohci-st: OHCI STMicroelectronics driver [ 2.287293] ohci-atmel: OHCI Atmel driver [ 2.292046] usbcore: registered new interface driver usb-storage [ 2.300042] mousedev: PS/2 mouse device common for all mice [ 2.315494] i2c /dev entries driver [ 2.327271] sdhci: Secure Digital Host Controller Interface driver [ 2.333824] sdhci: Copyright(c) Pierre Ossman [ 2.339512] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.405903] Synopsys Designware Multimedia Card Interface Driver [ 2.416878] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.428978] usbcore: registered new interface driver usbhid [ 2.435039] usbhid: USB HID core driver [ 2.444013] NET: Registered protocol family 10 [ 2.452432] mmc1: new high speed MMC card at address 0001 [ 2.458766] sit: IPv6 over IPv4 tunneling driver [ 2.465269] NET: Registered protocol family 17 [ 2.470061] can: controller area network core (rev 20120528 abi 9) [ 2.476854] mmcblk0: mmc1:0001 M62704 3.56 GiB [ 2.481912] NET: Registered protocol family 29 [ 2.484919] mmcblk0boot0: mmc1:0001 M62704 partition 1 2.00 MiB [ 2.493441] mmcblk0boot1: mmc1:0001 M62704 partition 2 2.00 MiB [ 2.499692] can: raw protocol (rev 20120528) [ 2.499704] can: broadcast manager protocol (rev 20120528 t) [ 2.499728] can: netlink gateway (rev 20130117) max_hops=1 [ 2.500498] Key type dns_resolver registered [ 2.500686] omap_voltage_late_init: Voltage driver support not added [ 2.500865] ThumbEE CPU extension supported. [ 2.500890] Registering SWP/SWPB emulation handler [ 2.531820] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.532161] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.533899] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.534133] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.534362] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.534583] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.534783] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.535669] hctosys: unable to open rtc device (rtc0) [ 2.550093] net eth0: initializing cpsw version 1.12 (0) [ 2.552478] net eth0: phy found : id is : 0x7c0f1 [ 2.552561] libphy: PHY 4a101000.mdio:01 not found [ 2.552570] net eth0: phy \"4a101000.mdio:01\" not found on slave 1, err -19 [ 2.562782] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.645784] mmcblk0: p1 [ 6.580292] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6.589712] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.604681] Sending DHCP requests ., OK [ 6.629688] IP-Config: Got DHCP answer from 192.168.11.1, my address is 192.168.11.2 [ 6.637829] IP-Config: Complete: [ 6.641222] device=eth0, hwaddr=64:cf:d9:3f:a0:d5, ipaddr=192.168.11.2, mask=255.255.255.0, gw=192.168.11.1 [ 6.651901] host=192.168.11.2, domain=usen.ad.jp, nis-domain=(none) [ 6.658944] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= [ 6.665246] nameserver0=192.168.11.1 [ 6.673160] Freeing unused kernel memory: 1028K [ 6.719504] devpts: called with bogus options Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.900788] udevd[106]: starting version 3.2.9 [ 6.907070] random: udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 6.917716] random: udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 6.927736] random: udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 6.947603] udevd[106]: specified user 'tss' unknown [ 6.953249] udevd[106]: specified group 'tss' unknown [ 6.964102] udevd[107]: starting eudev-3.2.9 [ 8.005642] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 done Saving random seed: [ 9.222729] random: dd: uninitialized urandom read (512 bytes read, 12 bits of entropy available) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: [ 9.352481] random: dropbear: uninitialized urandom read (32 bytes read, 12 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-842612/environment . /lava-842612/environment / # /lava-842612/bin/lava-test-runner /lava-842612/0 /lava-842612/bin/lava-test-runner /lava-842612/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-842612/0/tests/0_dmesg + cat uuid + UUID=842612_1.5.2.4.1 + set +x [ 9.964434] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : clocksource_probe: no matching clocksources found [ 10.026988] [ 10.082799] [ 10.138795] + set +x [ 10.151003] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-842612/environment / # . /lava-842612/environment/lava-842612/bin/lava-test-runner /lava-842612/1 / # /lava-842612/bin/lava-test-runner /lava-842612/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-842612/1/tests/1_bootrr + cat uuid + UUID=842612_1.5.2.4.5 + set +x [ 10.660361] + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-842612/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-842612/1/../bin/lava-test-case [ 10.707474] /lava-842612/1/../bin/lava-test-case [ 10.761854] /lava-842612/1/../bin/lava-test-case [ 10.794113] + set +x [ 10.821404] / #