connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1005587/tftp-deploy-gyyf13y2/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1005587/tftp-deploy-gyyf13y2/dtb/imx6dl-riotboard.dtb /mnt/tftp/1005587/tftp-deploy-gyyf13y2/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1005587/tftp-deploy-gyyf13y2/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1005587/tftp-deploy-gyyf13y2/dtb/imx6dl-riotboard.dtb /mnt/tftp/1005587/tftp-deploy-gyyf13y2/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 66:53:1a:3b:b9:ad eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.174 Loading ARM Linux zImage '/mnt/tftp/1005587/tftp-deploy-gyyf13y2/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1005587/tftp-deploy-gyyf13y2/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a89122 Loading devicetree from '/mnt/tftp/1005587/tftp-deploy-gyyf13y2/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a8a000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-cip80-rt46 (KernelCI@build-j83945-arm-gcc-10-multi-v7-defconfig-bc24x) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Sat Oct 28 18:54:19 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s15180 r8192 d21684 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 946984K/1048576K available (8658K kernel code, 986K rwdata, 3872K rodata, 1048K init, 320K bss, 36056K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e45880 (12535 kB) [ 0.000000] .init : 0xc0e46000 - 0xc0f4c000 (1048 kB) [ 0.000000] .data : 0xc0f4c000 - 0xc1042b20 ( 987 kB) [ 0.000000] .bss : 0xc1045000 - 0xc1095258 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000023] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002220] Console: colour dummy device 80x30 [ 0.002245] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002259] pid_max: default: 32768 minimum: 301 [ 0.002368] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002380] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003022] CPU: Testing write buffer coherency: ok [ 0.003054] CPU0: Spectre v2: using BPIALL workaround [ 0.003320] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003396] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006573] Brought up 1 CPUs [ 0.006586] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006594] CPU: All CPU(s) started in SVC mode. [ 0.007326] devtmpfs: initialized [ 0.014511] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015227] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017676] pinctrl core: initialized pinctrl subsystem [ 0.019550] NET: Registered protocol family 16 [ 0.022349] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023929] cpuidle: using governor ladder [ 0.023945] cpuidle: using governor menu [ 0.024168] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.044207] No ATAGs? [ 0.044237] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.044245] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.047018] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.049304] Serial: AMBA PL011 UART driver [ 0.051121] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.063552] mxs-dma 110000.dma-apbh: initialized [ 0.068516] vgaarb: loaded [ 0.069491] SCSI subsystem initialized [ 0.069935] usbcore: registered new interface driver usbfs [ 0.069994] usbcore: registered new interface driver hub [ 0.070038] usbcore: registered new device driver usb [ 0.071764] pps_core: LinuxPPS API ver. 1 registered [ 0.071774] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071803] PTP clock support registered [ 0.072036] EDAC MC: Ver: 3.0.0 [ 0.074547] clocksource: Switched to clocksource mxc_timer1 [ 0.084388] NET: Registered protocol family 2 [ 0.084574] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.085564] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085649] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085781] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085923] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085961] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086155] NET: Registered protocol family 1 [ 0.086545] RPC: Registered named UNIX socket transport module. [ 0.086556] RPC: Registered udp transport module. [ 0.086562] RPC: Registered tcp transport module. [ 0.086570] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087076] Unpacking initramfs... [ 0.987423] Freeing initrd memory: 10792K [ 0.987827] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.000111] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.001044] NFS: Registering the id_resolver key type [ 1.001081] Key type id_resolver registered [ 1.001088] Key type id_legacy registered [ 1.001166] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.002729] bounce: pool size: 64 pages [ 1.002959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.002980] io scheduler noop registered [ 1.002997] io scheduler deadline registered [ 1.003037] io scheduler cfq registered (default) [ 1.023740] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.023759] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.078587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.081128] SuperH (H)SCI(F) driver initialized [ 1.081725] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.082395] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.738182] console [ttymxc1] enabled [ 1.742357] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.751580] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.760788] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.770452] msm_serial: driver initialized [ 1.775263] STMicroelectronics ASC driver initialized [ 1.782196] [drm] Initialized drm 1.1.0 20060810 [ 1.796568] loop: module loaded [ 1.808011] CAN device driver interface [ 1.814034] 2188000.ethernet supply phy not found, using dummy regulator [ 1.829823] pps pps0: new PPS source ptp0 [ 1.852918] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.859250] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.866251] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.875278] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.882757] usbcore: registered new interface driver pegasus [ 1.888511] usbcore: registered new interface driver asix [ 1.893979] usbcore: registered new interface driver ax88179_178a [ 1.900141] usbcore: registered new interface driver cdc_ether [ 1.906067] usbcore: registered new interface driver smsc75xx [ 1.911895] usbcore: registered new interface driver smsc95xx [ 1.917711] usbcore: registered new interface driver net1080 [ 1.923438] usbcore: registered new interface driver cdc_subset [ 1.929418] usbcore: registered new interface driver zaurus [ 1.935093] usbcore: registered new interface driver cdc_ncm [ 1.942622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.949189] ehci-pci: EHCI PCI platform driver [ 1.953709] ehci-platform: EHCI generic platform driver [ 1.959198] ehci-omap: OMAP-EHCI Host Controller driver [ 1.964623] ehci-orion: EHCI orion driver [ 1.968791] SPEAr-ehci: EHCI SPEAr driver [ 1.972984] ehci-st: EHCI STMicroelectronics driver [ 1.978038] ehci-exynos: EHCI EXYNOS driver [ 1.982419] ehci-atmel: EHCI Atmel driver [ 1.986612] tegra-ehci: Tegra EHCI driver [ 1.990828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.997051] ohci-pci: OHCI PCI platform driver [ 2.001569] ohci-platform: OHCI generic platform driver [ 2.007009] ohci-omap3: OHCI OMAP3 driver [ 2.011211] SPEAr-ohci: OHCI SPEAr driver [ 2.015406] ohci-st: OHCI STMicroelectronics driver [ 2.020458] ohci-atmel: OHCI Atmel driver [ 2.025103] usbcore: registered new interface driver usb-storage [ 2.036391] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.041493] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.046423] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.059560] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.065804] hub 1-0:1.0: USB hub found [ 2.069650] hub 1-0:1.0: 1 port detected [ 2.074203] 2184200.usb supply vbus not found, using dummy regulator [ 2.084073] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.089014] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.104577] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.110793] hub 2-0:1.0: USB hub found [ 2.114635] hub 2-0:1.0: 1 port detected [ 2.119649] mousedev: PS/2 mouse device common for all mice [ 2.129674] i2c /dev entries driver [ 2.142627] sdhci: Secure Digital Host Controller Interface driver [ 2.148837] sdhci: Copyright(c) Pierre Ossman [ 2.155171] Synopsys Designware Multimedia Card Interface Driver [ 2.162394] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.168908] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.178099] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.183270] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.188800] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.229680] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.237476] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.246670] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.251841] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.259235] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.299687] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.307444] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.318981] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.359566] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.369342] ledtrig-cpu: registered to indicate activity on CPUs [ 2.375614] usbcore: registered new interface driver usbhid [ 2.381213] usbhid: USB HID core driver [ 2.389967] NET: Registered protocol family 10 [ 2.394987] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.406067] sit: IPv6 over IPv4 tunneling driver [ 2.411362] NET: Registered protocol family 17 [ 2.415857] can: controller area network core (rev 20120528 abi 9) [ 2.422285] NET: Registered protocol family 29 [ 2.426773] can: raw protocol (rev 20120528) [ 2.431070] can: broadcast manager protocol (rev 20120528 t) [ 2.436766] can: netlink gateway (rev 20130117) max_hops=1 [ 2.442731] Key type dns_resolver registered [ 2.447116] ThumbEE CPU extension supported. [ 2.451422] Registering SWP/SWPB emulation handler [ 2.471775] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.481609] hctosys: unable to open rtc device (rtc0) [ 2.495570] 2P5V: disabling [ 2.503434] Freeing unused kernel memory: 1048K [ 2.532147] hub 2-1:1.0: USB hub found [ 2.538610] hub 2-1:1.0: 4 ports detected [ 2.549421] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.560883] mmc2: unspecified timeout for CMD6 - use generic [ 2.573666] mmc2: unspecified timeout for CMD6 - use generic [ 2.583580] devpts: called with bogus options [ 2.588099] mmc2: Card stuck in programming state! __mmc_switch [ 2.597170] mmc2: unspecified timeout for CMD6 - use generic [ 2.606801] mmc2: new high speed MMC card at address 0001 [ 2.619687] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.628264] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.641922] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.653051] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.673733] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.683199] mmcblk0: retrying using single block read Starting klogd: [ 2.700333] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.709616] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.762964] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.772248] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.799755] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.809026] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.819904] udevd[95]: starting version 3.2.9 [ 2.825488] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.834857] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.844129] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.850709] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.859860] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.869135] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.878398] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.893696] udevd[95]: specified user 'tss' unknown [ 2.898725] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.907991] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.914670] udevd[95]: specified group 'tss' unknown [ 2.923071] udevd[96]: starting eudev-3.2.9 [ 2.935173] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.944456] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 2.969708] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.978978] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 2.985017] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.037915] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.047376] mmcblk0: retrying using single block read [ 3.109697] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.118973] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.175977] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.185265] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.247099] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.290391] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.331952] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.373541] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.417543] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.456526] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.465815] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.473200] mmcblk0: unable to read partition table [ 3.495257] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.735378] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.745357] mmcblk0: retrying using single block read [ 3.774626] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.793044] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.824603] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.861308] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.898089] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.934692] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 3.969274] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.005915] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.044220] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.054205] mmcblk0: retrying using single block read [ 4.098163] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.133817] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.169652] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.205970] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.239650] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.277294] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.313287] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.350522] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.360335] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.373118] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.383272] mmcblk0boot0: retrying using single block read [ 4.425379] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.463610] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.499477] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.537981] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.574062] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.611212] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.646154] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.683174] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.694063] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.704208] mmcblk0boot1: retrying using single block read [ 4.745584] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.782656] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.811386] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.821825] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.832252] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.842677] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.853088] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.863432] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.872295] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.882937] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.893070] mmcblk0boot0: retrying using single block read [ 4.899039] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.909386] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.918247] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.928639] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.939049] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.949393] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.958257] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.968656] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.979060] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.989401] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.998250] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.008204] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.017846] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.027987] mmcblk0boot1: retrying using single block read [ 5.033969] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.044380] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.054795] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.065139] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.073996] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.084390] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.094803] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.105144] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.113994] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.124384] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.134333] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.378137] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.388099] mmcblk0: retrying using single block read [ 5.393698] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.403992] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.414284] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.424509] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.433398] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.443700] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.454013] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.464261] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.473115] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.483364] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.492216] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.502688] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.512642] mmcblk0: retrying using single block read [ 5.518227] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.528520] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.538811] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.549036] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.557889] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.568138] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.576993] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.587245] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.596095] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.606345] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.615202] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.625498] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.635276] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.647812] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.657963] mmcblk0boot1: retrying using single block read [ 5.665870] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.676300] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.686723] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.697129] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.707543] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.717890] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.726760] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.737169] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.747580] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.758217] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.768344] mmcblk0boot0: retrying using single block read [ 5.774314] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.784720] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.795111] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.805520] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.815862] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.824729] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.835121] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.845533] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.855927] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.866660] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.876784] mmcblk0boot1: retrying using single block read [ 5.882750] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.893138] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.903542] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.913882] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.922737] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.933079] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.941930] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.952271] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.961122] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.971463] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.980335] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.990726] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.000676] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 6.010429] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 6.020568] mmcblk0boot0: retrying using single block read [ 6.026551] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.036960] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.047370] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.057716] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.066576] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.076919] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.085769] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.096111] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.104963] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.115307] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.124154] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.134669] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.144616] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.175782] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.272437] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1005587/environment . /lava-1005587/environment / # /lava-1005587/bin/lava-test-runner /lava-1005587/0 /lava-1005587/bin/lava-test-runner /lava-1005587/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1005587/0/tests/0_dmesg + cat uuid [ 6.843063] + UUID=1005587_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.890601] [ 6.935282] [ 6.980160] + set +x [ 6.989891] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1005587/environment / # . /lava-1005587/environment/lava-1005587/bin/lava-test-runner /lava-1005587/1 / # /lava-1005587/bin/lava-test-runner /lava-1005587/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1005587/1/tests/1_bootrr + cat uuid [ 7.470461] + UUID=1005587_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1005587/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1005587/1/../bin/lava-test-case [ 7.505661] /lava-1005587/1/../bin/lava-test-case [ 7.545085] /lava-1005587/1/../bin/lava-test-case [ 7.569879] + set +x [ 7.588604] / #