Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.7 (6 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 1167966/tftp-deploy-wtexruel/kernel/zImage tftp 0x82000000 1167966/tftp-deploy-wtexruel/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.7 Filename '1167966/tftp-deploy-wtexruel/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ########################################################### 5.2 MiB/s done Bytes transferred = 3716920 (38b738 hex) => tftp 0x83000000 1167966/tftp-deploy-wtexruel/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1167966/tftp-deploy-wtexruel/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.7 Filename '1167966/tftp-deploy-wtexruel/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################## 5.2 MiB/s done Bytes transferred = 7894358 (787556 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1167966/tftp-deploy-wtexruel/dtb/am335x-boneblack.dtb tftp 0x88000000 1167966/tftp-deploy-wtexruel/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.7 Filename '1167966/tftp-deploy-wtexruel/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *### 4 MiB/s done Bytes transferred = 33561 (8319 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1167966/extract-nfsrootfs-zzgjwegq,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1167966/extract-nfsrootfs-zzgjwegq,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-07-17 23:21:20 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 7894294 Bytes = 7.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b318 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.302-cip89-rt50 (KernelCI@build-j271534-arm-gcc-12-omap2plus-defconfig-vxtkg) (gcc version 12.2.0 (Debian 12.2.0-14) ) #1 SMP Wed Jul 17 21:49:46 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] Malformed early option 'earlycon' [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @df915000 s21224 r8192 d23832 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1167966/extract-nfsrootfs-zzgjwegq,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 474072K/522240K available (6959K kernel code, 754K rwdata, 2232K rodata, 444K init, 8190K bss, 31784K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc09020dc (9193 kB) [ 0.000000] .init : 0xc0903000 - 0xc0972000 ( 444 kB) [ 0.000000] .data : 0xc0972000 - 0xc0a2e890 ( 755 kB) [ 0.000000] .bss : 0xc0a31000 - 0xc1230818 (8191 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000014] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000034] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000078] OMAP clocksource: timer1 at 24000000 Hz [ 0.000492] clocksource_probe: no matching clocksources found [ 0.001329] Console: colour dummy device 80x30 [ 0.001388] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001397] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001404] ... MAX_LOCK_DEPTH: 48 [ 0.001412] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001419] ... CLASSHASH_SIZE: 4096 [ 0.001426] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001433] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001440] ... CHAINHASH_SIZE: 32768 [ 0.001447] memory used by lock dependency info: 5167 kB [ 0.001455] per task-struct memory footprint: 1536 bytes [ 0.001481] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078734] pid_max: default: 32768 minimum: 301 [ 0.079141] Security Framework initialized [ 0.079257] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079269] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082010] Initializing cgroup subsys io [ 0.082105] Initializing cgroup subsys memory [ 0.082194] Initializing cgroup subsys devices [ 0.082307] Initializing cgroup subsys freezer [ 0.082375] Initializing cgroup subsys perf_event [ 0.082442] CPU: Testing write buffer coherency: ok [ 0.082590] CPU0: Spectre v2: using BPIALL workaround [ 0.083957] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.084068] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.087871] Brought up 1 CPUs [ 0.087894] SMP: Total of 1 processors activated (996.14 BogoMIPS). [ 0.087904] CPU: All CPU(s) started in SVC mode. [ 0.091832] devtmpfs: initialized [ 0.125875] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.178024] omap_hwmod: debugss: _wait_target_disable failed [ 0.220295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.220369] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.223202] pinctrl core: initialized pinctrl subsystem [ 0.228044] NET: Registered protocol family 16 [ 0.233769] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.235868] cpuidle: using governor ladder [ 0.235897] cpuidle: using governor menu [ 0.247346] OMAP GPIO hardware version 0.1 [ 0.268673] No ATAGs? [ 0.268710] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.309271] edma 49000000.edma: TI EDMA DMA engine driver [ 0.313280] SCSI subsystem initialized [ 0.315215] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.315325] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.315580] pps_core: LinuxPPS API ver. 1 registered [ 0.315590] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.315641] PTP clock support registered [ 0.319791] clocksource: Switched to clocksource timer1 [ 0.448249] NET: Registered protocol family 2 [ 0.448753] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 0.450699] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.450790] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.451365] TCP: Hash tables configured (established 4096 bind 4096) [ 0.451560] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.451655] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.452184] NET: Registered protocol family 1 [ 0.453794] RPC: Registered named UNIX socket transport module. [ 0.453816] RPC: Registered udp transport module. [ 0.453826] RPC: Registered tcp transport module. [ 0.453835] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.455309] Trying to unpack rootfs image as initramfs... [ 1.031174] Freeing initrd memory: 7712K [ 1.032082] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.036520] audit: initializing netlink subsys (disabled) [ 1.036820] audit: type=2000 audit(1.030:1): initialized [ 1.041965] VFS: Disk quotas dquot_6.6.0 [ 1.042152] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.044359] NFS: Registering the id_resolver key type [ 1.044712] Key type id_resolver registered [ 1.044726] Key type id_legacy registered [ 1.044898] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.050400] io scheduler noop registered [ 1.050435] io scheduler deadline registered [ 1.050491] io scheduler cfq registered (default) [ 1.052503] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 1.055287] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 1.062438] omap_uart 44e09000.serial: no wakeirq for uart0 [ 1.063079] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0 [ 1.815540] console [ttyO0] enabled [ 1.854424] brd: module loaded [ 1.878874] loop: module loaded [ 1.884748] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.959849] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.966237] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.002164] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.013196] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 [ 2.025165] mousedev: PS/2 mouse device common for all mice [ 2.031156] i2c /dev entries driver [ 2.037331] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.120190] ledtrig-cpu: registered to indicate activity on CPUs [ 2.127687] oprofile: using arm/armv7 [ 2.132505] Initializing XFRM netlink socket [ 2.137476] NET: Registered protocol family 10 [ 2.145459] sit: IPv6 over IPv4 tunneling driver [ 2.152629] NET: Registered protocol family 17 [ 2.157372] NET: Registered protocol family 15 [ 2.162505] Key type dns_resolver registered [ 2.167187] omap_voltage_late_init: Voltage driver support not added [ 2.173920] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.182434] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.191634] ThumbEE CPU extension supported. [ 2.196149] Registering SWP/SWPB emulation handler [ 2.201249] SmartReflex Class3 initialized [ 2.256765] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.263276] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.273491] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.281247] hctosys: unable to open rtc device (rtc0) [ 2.286556] sr_init: No PMIC hook to init smartreflex [ 2.292151] sr_init: platform driver register failed for SR [ 2.317630] net eth0: initializing cpsw version 1.12 (0) [ 2.325766] net eth0: phy found : id is : 0x7c0f1 [ 2.330858] libphy: PHY 4a101000.mdio:01 not found [ 2.335864] net eth0: phy \"4a101000.mdio:01\" not found on slave 1, err -19 [ 2.346909] mmc1: new high speed MMC card at address 0001 [ 2.355663] mmcblk0: mmc1:0001 M62704 3.56 GiB [ 2.361830] mmcblk0boot0: mmc1:0001 M62704 partition 1 2.00 MiB [ 2.368847] mmcblk0boot1: mmc1:0001 M62704 partition 2 2.00 MiB [ 2.383067] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.389638] mmcblk0: p1 [ 6.360425] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6.369265] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.380060] Sending DHCP requests ., OK [ 6.401282] IP-Config: Got DHCP answer from 192.168.11.1, my address is 192.168.11.7 [ 6.409381] IP-Config: Complete: [ 6.412849] device=eth0, hwaddr=64:cf:d9:3f:a0:d5, ipaddr=192.168.11.7, mask=255.255.255.0, gw=192.168.11.1 [ 6.423508] host=192.168.11.7, domain=usen.ad.jp, nis-domain=(none) [ 6.430526] bootserver=0.0.0.0, rootserver=192.168.11.5, rootpath= [ 6.437249] nameserver0=192.168.11.1 [ 6.445651] Freeing unused kernel memory: 444K Loading, please wait... Starting systemd-udevd version 252.12-1~deb12u1 [ 6.604329] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.655266] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.677937] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.688319] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.701587] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.723100] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.738855] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.757681] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.782147] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.830634] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 8.066909] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.077963] 47401300.usb-phy supply vcc not found, using dummy regulator [ 8.088753] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 8.110867] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 8.235610] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 8.714851] usbcore: registered new interface driver usbfs [ 8.721419] usbcore: registered new interface driver hub [ 8.727180] usbcore: registered new device driver usb [ 8.762951] musb-hdrc musb-hdrc.0.auto: Failed to request rx1. [ 8.769575] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 8.780601] musb-hdrc musb-hdrc.1.auto: Failed to request rx1. [ 8.786844] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 [ 8.797546] musb-hdrc musb-hdrc.0.auto: Failed to request rx1. [ 8.803944] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 8.813862] musb-hdrc musb-hdrc.1.auto: Failed to request rx1. [ 8.820147] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 [ 9.002024] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 9.008712] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 9.184816] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.192070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.199616] usb usb1: Product: MUSB HDRC host driver [ 9.204829] usb usb1: Manufacturer: Linux 4.4.302-cip89-rt50 musb-hcd [ 9.211578] usb usb1: SerialNumber: musb-hdrc.1.auto [ 9.389556] hub 1-0:1.0: USB hub found [ 9.418235] hub 1-0:1.0: 1 port detected Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address 64:cf:d9:3f:a0:d5 mtu 1500 DHCP IP-Config: eth0 guessed broadcast address 192.168.11.255 IP-Config: eth0 complete (dhcp from 192.168.11.1): address: 192.168.11.7 broadcast: 192.168.11.255 netmask: 255.255.255.0 gateway: 192.168.11.1 dns0 : 192.168.11.1 dns1 : 0.0.0.0 domain : usen.ad.jp rootserver: 192.168.11.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... mount: No such file or directory mount: invalid option -- done. mount: No such file or directory run-init: opening console: No such file or directory Target filesystem doesn't have requested /sbin/init. run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory No init found. Try passing init= bootarg. (initramfs) [ 158.360491] random: nonblocking pool is initialized