Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.11-rc2-00101-g1ed3c0954b (Oct 25 2018 - 13:13:23 +0200) OMAP4430-GP ES2.1 Trying to boot from MMC1 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! U-Boot 2018.11-rc2-00101-g1ed3c0954b (Oct 25 2018 - 13:13:23 +0200) CPU : OMAP4430-GP ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Loading Environment from FAT... Unable to use mmc 0:1... Net: No ethernet found. Hit any key to stop autoboot: 2  0 => usb start usb start starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client bound to address 10.201.3.110 (8 ms) => setenv serverip 10.201.1.8 setenv serverip 10.201.1.8 => tftp 0x82000000 2587298/tftp-deploy-4dcdjs95/kernel/zImage tftp 0x82000000 2587298/tftp-deploy-4dcdjs95/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2587298/tftp-deploy-4dcdjs95/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 1.3 MiB/s done Bytes transferred = 6602416 (64beb0 hex) => tftp 0x84000000 2587298/tftp-deploy-4dcdjs95/ramdisk/ramdisk.cpio.gz.uboot tftp 0x84000000 2587298/tftp-deploy-4dcdjs95/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2587298/tftp-deploy-4dcdjs95/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x84000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.3 MiB/s done Bytes transferred = 11030526 (a84ffe hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x83f00000 2587298/tftp-deploy-4dcdjs95/dtb/omap4-panda.dtb tftp 0x83f00000 2587298/tftp-deploy-4dcdjs95/dtb/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2587298/tftp-deploy-4dcdjs95/dtb/omap4-panda.dtb'. Load address: 0x83f00000 Loading: *#### 1 MiB/s done Bytes transferred = 56722 (dd92 hex) => setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x84000000 0x83f00000 bootz 0x82000000 0x84000000 0x83f00000 ## Loading init Ramdisk from Legacy Image at 84000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 11030462 Bytes = 10.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f00000 Booting using the fdt blob at 0x83f00000 Using Device Tree in place at 83f00000, end 83f10d91 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-cip70-st25 (KernelCI@build-j244024-arm-gcc-10-multi-v7-defconfig-fjlkz) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Fri Sep 30 15:33:18 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP4 PandaBoard [ 0.000000] Malformed early option 'earlycon' [ 0.000000] cma: Reserved 64 MiB at 0xbb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] OMAP4430 ES2.1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7ad000 s14860 r8192 d22004 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 945948K/1046528K available (8645K kernel code, 985K rwdata, 3872K rodata, 1052K init, 320K bss, 35044K reserved, 65536K cma-reserved, 194560K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e426b8 (12522 kB) [ 0.000000] .init : 0xc0e43000 - 0xc0f4a000 (1052 kB) [ 0.000000] .data : 0xc0f4a000 - 0xc1040700 ( 986 kB) [ 0.000000] .bss : 0xc1043000 - 0xc1093260 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 errata 727915 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.003570] Console: colour dummy device 80x30 [ 0.003601] Calibrating delay loop... 1195.21 BogoMIPS (lpj=2988032) [ 0.031127] pid_max: default: 32768 minimum: 301 [ 0.031280] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.031280] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.032012] CPU: Testing write buffer coherency: ok [ 0.032043] CPU0: Spectre v2: using BPIALL workaround [ 0.032257] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.032348] Setting up static identity map for 0x80209000 - 0x80209098 [ 0.066131] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.066131] CPU1: Spectre v2: using BPIALL workaround [ 0.066223] Brought up 2 CPUs [ 0.066253] SMP: Total of 2 processors activated (2390.42 BogoMIPS). [ 0.066253] CPU: All CPU(s) started in SVC mode. [ 0.067321] devtmpfs: initialized [ 0.086486] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 0.088836] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.090332] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.186798] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.186828] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.193237] pinctrl core: initialized pinctrl subsystem [ 0.195617] NET: Registered protocol family 16 [ 0.198394] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.211181] cpuidle: using governor ladder [ 0.226165] cpuidle: using governor menu [ 0.234313] OMAP GPIO hardware version 0.1 [ 0.239288] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.239288] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.239898] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 ! [ 0.240325] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 ! [ 0.240722] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 ! [ 0.253326] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.253631] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.259063] No ATAGs? [ 0.259124] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.259124] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.261444] OMAP DMA hardware revision 0.0 [ 0.266693] Serial: AMBA PL011 UART driver [ 0.269409] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver [ 0.298706] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.371276] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_gpio, deferring probe [ 0.376190] vgaarb: loaded [ 0.377319] SCSI subsystem initialized [ 0.377807] usbcore: registered new interface driver usbfs [ 0.377899] usbcore: registered new interface driver hub [ 0.377960] usbcore: registered new device driver usb [ 0.379333] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.379394] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c2_pins, deferring probe [ 0.379425] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.379455] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.380798] pps_core: LinuxPPS API ver. 1 registered [ 0.380798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.380828] PTP clock support registered [ 0.381103] EDAC MC: Ver: 3.0.0 [ 0.384002] clocksource: Switched to clocksource 32k_counter [ 0.396942] NET: Registered protocol family 2 [ 0.397125] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.398284] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.398376] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.398529] TCP: Hash tables configured (established 8192 bind 8192) [ 0.398620] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.398712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.398956] NET: Registered protocol family 1 [ 0.399322] RPC: Registered named UNIX socket transport module. [ 0.399322] RPC: Registered udp transport module. [ 0.399322] RPC: Registered tcp transport module. [ 0.399353] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.401855] Unpacking initramfs... [ 1.423767] Freeing initrd memory: 10772K [ 1.439788] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.440795] NFS: Registering the id_resolver key type [ 1.440856] Key type id_resolver registered [ 1.440856] Key type id_legacy registered [ 1.440948] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.442535] bounce: pool size: 64 pages [ 1.442779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.442779] io scheduler noop registered [ 1.442810] io scheduler deadline registered [ 1.442840] io scheduler cfq registered (default) [ 1.451660] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 1.451873] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 1.535797] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.539123] SuperH (H)SCI(F) driver initialized [ 1.540466] msm_serial: driver initialized [ 1.541290] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.541442] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 226, base_baud = 3000000) is a OMAP UART0 [ 1.542022] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 227, base_baud = 3000000) is a OMAP UART1 [ 1.542480] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 228, base_baud = 3000000) is a OMAP UART2 [ 2.419647] console [ttyO2] enabled [ 2.423767] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 229, base_baud = 3000000) is a OMAP UART3 [ 2.434051] STMicroelectronics ASC driver initialized [ 2.441741] [drm] Initialized drm 1.1.0 20060810 [ 2.457733] loop: module loaded [ 2.474029] CAN device driver interface [ 2.480194] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.487487] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.498077] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.505920] usbcore: registered new interface driver pegasus [ 2.511932] usbcore: registered new interface driver asix [ 2.517639] usbcore: registered new interface driver ax88179_178a [ 2.524078] usbcore: registered new interface driver cdc_ether [ 2.530273] usbcore: registered new interface driver smsc75xx [ 2.536376] usbcore: registered new interface driver smsc95xx [ 2.542449] usbcore: registered new interface driver net1080 [ 2.548431] usbcore: registered new interface driver cdc_subset [ 2.554687] usbcore: registered new interface driver zaurus [ 2.560638] usbcore: registered new interface driver cdc_ncm [ 2.569061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.575897] ehci-pci: EHCI PCI platform driver [ 2.580627] ehci-platform: EHCI generic platform driver [ 2.586425] ehci-omap: OMAP-EHCI Host Controller driver [ 2.612426] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 2.618133] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 2.626403] ehci-omap 4a064c00.ehci: irq 333, io mem 0x4a064c00 [ 2.639007] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 2.646118] hub 1-0:1.0: USB hub found [ 2.650146] hub 1-0:1.0: 3 ports detected [ 2.654968] ehci-orion: EHCI orion driver [ 2.659484] SPEAr-ehci: EHCI SPEAr driver [ 2.663879] ehci-st: EHCI STMicroelectronics driver [ 2.669219] ehci-exynos: EHCI EXYNOS driver [ 2.673828] ehci-atmel: EHCI Atmel driver [ 2.678253] tegra-ehci: Tegra EHCI driver [ 2.682708] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.689208] ohci-pci: OHCI PCI platform driver [ 2.693939] ohci-platform: OHCI generic platform driver [ 2.699707] ohci-omap3: OHCI OMAP3 driver [ 2.704162] ohci-omap3 4a064800.ohci: OHCI Host Controller [ 2.709930] ohci-omap3 4a064800.ohci: new USB bus registered, assigned bus number 2 [ 2.718170] ohci-omap3 4a064800.ohci: irq 332, io mem 0x4a064800 [ 2.799835] hub 2-0:1.0: USB hub found [ 2.803771] hub 2-0:1.0: 3 ports detected [ 2.808593] SPEAr-ohci: OHCI SPEAr driver [ 2.813079] ohci-st: OHCI STMicroelectronics driver [ 2.818420] ohci-atmel: OHCI Atmel driver [ 2.823516] usbcore: registered new interface driver usb-storage [ 2.832031] mousedev: PS/2 mouse device common for all mice [ 2.843292] i2c /dev entries driver [ 2.859802] sdhci: Secure Digital Host Controller Interface driver [ 2.866271] sdhci: Copyright(c) Pierre Ossman [ 2.874908] Synopsys Designware Multimedia Card Interface Driver [ 2.882873] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.892272] ledtrig-cpu: registered to indicate activity on CPUs [ 2.898864] usbcore: registered new interface driver usbhid [ 2.904693] usbhid: USB HID core driver [ 2.915222] NET: Registered protocol family 10 [ 2.920715] sit: IPv6 over IPv4 tunneling driver [ 2.926300] NET: Registered protocol family 17 [ 2.930969] can: controller area network core (rev 20120528 abi 9) [ 2.934051] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.944641] NET: Registered protocol family 29 [ 2.949310] can: raw protocol (rev 20120528) [ 2.953765] can: broadcast manager protocol (rev 20120528 t) [ 2.959716] can: netlink gateway (rev 20130117) max_hops=1 [ 2.966033] Key type dns_resolver registered [ 2.970733] twl: not initialized [ 2.974121] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.982482] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.990875] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.999267] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.007659] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.016021] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.024414] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 3.032806] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 3.040008] omap2_set_init_voltage: unable to set vdd_mpu [ 3.045654] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.052947] omap2_set_init_voltage: unable to set vdd_core [ 3.058715] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 3.065917] omap2_set_init_voltage: unable to set vdd_iva [ 3.072082] hub 1-1:1.0: USB hub found [ 3.076141] hub 1-1:1.0: 5 ports detected [ 3.076232] Power Management for TI OMAP4+ devices. [ 3.076232] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 3.080566] ThumbEE CPU extension supported. [ 3.080566] Registering SWP/SWPB emulation handler [ 3.104858] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 3.124328] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 3.131164] hw-breakpoint: CPU 0 failed to disable vector catch [ 3.137847] twl 0-0048: PIH (irq 337) nested IRQs [ 3.144531] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 3.152801] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 3.161315] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 3.179016] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 3.187561] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 3.194396] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 3.200897] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 3.355865] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.404083] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.508422] smsc95xx v1.0.4 [ 3.513336] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.523834] mmc0: new high speed SDHC card at address 59b4 [ 3.530242] mmcblk0: mmc0:59b4 USD 3.75 GiB [ 3.536224] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.598968] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 1e:bf:26:14:d3:98 [ 3.852844] mmc0: tried to reset card [ 3.883850] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.893737] mmcblk0: retrying using single block read [ 3.925872] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.935577] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.968719] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.968719] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 4.011535] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 4.021240] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 4.054382] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 4.064086] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 4.097198] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 4.097229] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 4.140014] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 4.149047] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 4.182952] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 4.182952] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 4.225830] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 4.235504] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 4.241821] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 4.276336] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 4.286193] mmcblk0: retrying using single block read [ 4.318450] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 4.318450] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 4.361175] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 4.370849] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 4.404113] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 4.440582] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 4.477020] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 4.513458] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 4.549926] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 4.586425] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 4.596099] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 4.603637] mmcblk0: unable to read partition table [ 4.635955] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 4.643432] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.040588] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xDDE1 [ 6.049102] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.064849] Sending DHCP requests ., OK [ 8.349578] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.4.59 [ 8.349578] IP-Config: Complete: [ 8.360992] device=eth0, hwaddr=1e:bf:26:14:d3:98, ipaddr=10.201.4.59, mask=255.255.0.0, gw=10.201.1.3 [ 8.371307] host=10.201.4.59, domain=, nis-domain=(none) [ 8.377410] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= [ 8.377410] nameserver0=10.1.1.1 [ 8.388427] vwl1271: disabling [ 8.395324] VDAC: disabling [ 8.398925] VANA: disabling [ 8.402709] VUSB: disabling [ 8.410491] Freeing unused kernel memory: 1052K [ 8.479705] devpts: called with bogus options Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 8.642822] udevd[97]: starting version 3.2.9 [ 8.648376] random: udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 8.658447] random: udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 8.668151] random: udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 8.686248] udevd[97]: specified user 'tss' unknown [ 8.686248] udevd[97]: specified group 'tss' unknown [ 8.701263] udevd[98]: starting eudev-3.2.9 [ 8.782379] random: udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 9.091583] mmcblk0: error -84 transferring data, sector 7862144, nr 8, cmd response 0x900, card status 0xb00 [ 9.101989] mmcblk0: retrying using single block read [ 9.111358] mmcblk0: error -84 transferring data, sector 7862144, nr 8, cmd response 0x900, card status 0x0 [ 9.121612] blk_update_request: 6 callbacks suppressed [ 9.127044] blk_update_request: I/O error, dev mmcblk0, sector 7862144 [ 9.160888] mmcblk0: error -84 transferring data, sector 7862145, nr 7, cmd response 0x900, card status 0x0 [ 9.171173] blk_update_request: I/O error, dev mmcblk0, sector 7862145 [ 9.178375] mmcblk0: error -84 transferring data, sector 7862146, nr 6, cmd response 0x900, card status 0x0 [ 9.188659] blk_update_request: I/O error, dev mmcblk0, sector 7862146 [ 9.195892] mmcblk0: error -84 transferring data, sector 7862147, nr 5, cmd response 0x900, card status 0x0 [ 9.206146] blk_update_request: I/O error, dev mmcblk0, sector 7862147 [ 9.239837] mmcblk0: error -84 transferring data, sector 7862148, nr 4, cmd response 0x900, card status 0x0 [ 9.250091] blk_update_request: I/O error, dev mmcblk0, sector 7862148 [ 9.257415] mmcblk0: error -84 transferring data, sector 7862149, nr 3, cmd response 0x900, card status 0x0 [ 9.267700] blk_update_request: I/O error, dev mmcblk0, sector 7862149 [ 9.301269] mmcblk0: error -84 transferring data, sector 7862150, nr 2, cmd response 0x900, card status 0x0 [ 9.311523] blk_update_request: I/O error, dev mmcblk0, sector 7862150 [ 9.363037] mmcblk0: error -84 transferring data, sector 7862151, nr 1, cmd response 0x900, card status 0x0 [ 9.373291] blk_update_request: I/O error, dev mmcblk0, sector 7862151 [ 9.380859] mmcblk0: error -84 transferring data, sector 7862144, nr 8, cmd response 0x900, card status 0xb00 [ 9.391296] mmcblk0: retrying using single block read [ 9.397766] mmcblk0: error -84 transferring data, sector 7862144, nr 8, cmd response 0x900, card status 0x0 [ 9.408020] blk_update_request: I/O error, dev mmcblk0, sector 7862144 [ 9.441619] mmcblk0: error -84 transferring data, sector 7862145, nr 7, cmd response 0x900, card status 0x0 [ 9.451843] blk_update_request: I/O error, dev mmcblk0, sector 7862145 [ 9.459442] mmcblk0: error -84 transferring data, sector 7862146, nr 6, cmd response 0x900, card status 0x0 [ 9.497253] mmcblk0: error -84 transferring data, sector 7862147, nr 5, cmd response 0x900, card status 0x0 [ 9.537994] mmcblk0: error -84 transferring data, sector 7862148, nr 4, cmd response 0x900, card status 0x0 [ 9.549468] mmcblk0: error -84 transferring data, sector 7862149, nr 3, cmd response 0x900, card status 0x0 [ 9.562866] mmcblk0: error -84 transferring data, sector 7862150, nr 2, cmd response 0x900, card status 0x0 [ 9.577209] mmcblk0: error -84 transferring data, sector 7862151, nr 1, cmd response 0x900, card status 0x0 [ 9.587524] Buffer I/O error on dev mmcblk0, logical block 982768, async page read done Saving random seed: [ 9.678436] random: dd: uninitialized urandom read (512 bytes read, 18 bits of entropy available) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: [ 9.742736] random: dropbear: uninitialized urandom read (32 bytes read, 19 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-2587298/environment . /lava-2587298/environment / # /lava-2587298/bin/lava-test-runner /lava-2587298/0 /lava-2587298/bin/lava-test-runner /lava-2587298/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2587298/0/tests/0_dmesg + cat uuid + UUID=2587298_1.5.2.4.1 + set +x [ 10.407989] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.455749] [ 10.497406] [ 10.538543] + set +x [ 10.548614] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-2587298/environment / # . /lava-2587298/environment/lava-2587298/bin/lava-test-runner /lava-2587298/1 / # /lava-2587298/bin/lava-test-runner /lava-2587298/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2587298/1/tests/1_bootrr + cat uuid + UUID=2587298_1.5.2.4.5[ 11.055114] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2587298/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2587298/1/../bin/lava-test-case [ 11.092346] /lava-2587298/1/../bin/lava-test-case [ 11.132324] /lava-2587298/1/../bin/lava-test-case [ 11.158660] + set +x [ 11.179443] / #