[Enter `^Ec?' for help] coreboot-7d042db9 Mon Oct 22 20:40:09 UTC 2018 bootblock starting... Manufacturer: ef SF: Detected W25Q32DW with sector size 0x1000, total 0x400000 VBOOT: Loading verstage. CBFS @ 20000 size e0000 CBFS: 'Master Header Locator' located CBFS at [20000:100000) CBFS: Locating 'fallback/verstage' CBFS: Found @ offset 12ec0 size 8ca1 Ungating power partition 0. Power gate toggle request accepted. Ungated power partition 0. Ungating power partition 15. Ungated power partition 15. Ungating power partition 14. Power gate toggle request accepted. Ungated power partition 14. coreboot-7d042db9 Mon Oct 22 20:40:09 UTC 2018 verstage starting... Exception handlers installed. LPAE Translation tables are @ 40000000 Mapping address range [0x00000000:0x00000000) as uncached Mapping address range [0x40000000:0x40100000) as writeback Setting address range [0x00000000:0x00100000) as unmapped Manufacturer: ef SF: Detected W25Q32DW with sector size 0x1000, total 0x400000 out: cmd=0x17: 03 b1 17 00 01 00 14 00 00 00 00 00 0e 00 00 00 02 00 00 00 b7 0d 02 40 0a 00 00 00 in-header: 03 5d 00 00 10 00 00 00 in-data: 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 tpm_vendor_probe: ValidSts bit set(1) in TPM_ACCESS register after 0 ms I2C TPM 2:20 (chip type slb9645tt device-id 0x1A) TPM: Startup TPM: command 0x99 returned 0x0 TPM: Asserting physical presence TPM: command 0x4000000a returned 0x0 TPM: command 0x65 returned 0x0 TPM: flags disable=0, deactivated=0, nvlocked=1 TPM: setup succeeded TPM: tlcl_read(0x1007, 10) TPM: command 0xcf returned 0x0 out: cmd=0xd: 03 f0 0d 00 00 00 00 00 in-header: 03 fc 01 00 00 00 00 00 in-data: handle_proto3_response: EC response with error code: 1 Chrome EC: UHEPI not supported out: cmd=0x87: 03 b8 87 00 00 00 04 00 c5 b4 01 40 in-header: 03 59 00 00 04 00 00 00 in-data: 80 20 00 00 Phase 1 FMAP: Found \"FLASH\" version 1.1 at 100000. FMAP: base = 0 size = 400000 #areas = 21 FMAP: area GBB found @ 101000 (978688 bytes) VB2:vb2_check_recovery() Recovery reason from previous boot: 0x0 / 0x0 Phase 2 Phase 3 FMAP: area GBB found @ 101000 (978688 bytes) VB2:vb2_report_dev_firmware() This is developer signed firmware FMAP: area VBLOCK_A found @ 200000 (8192 bytes) FMAP: area VBLOCK_A found @ 200000 (8192 bytes) VB2:vb2_verify_keyblock() Checking key block signature... VB2:vb2_load_fw_keyblock() Ignoring FW key rollback due to GBB flag FMAP: area VBLOCK_A found @ 200000 (8192 bytes) FMAP: area VBLOCK_A found @ 200000 (8192 bytes) VB2:vb2_verify_fw_preamble() Verifying preamble. VB2:vb2_load_fw_preamble() Ignoring FW rollback due to GBB flag Phase 4 FMAP: area FW_MAIN_A found @ 202000 (483072 bytes) VB2:vb2api_init_hash() HW crypto for hash_alg 2 not supported, using SW TPM: command 0x14 returned 0x0 TPM: command 0x14 returned 0x0 TPM: Set global lock TPM: tlcl_write(0x0, 0) TPM: command 0xcd returned 0x0 Slot A is selected CBFS: 'VBOOT' located CBFS at [202000:235b00) CBFS: Locating 'fallback/romstage' CBFS: Found @ offset 0 size 76b6 coreboot-7d042db9 Mon Oct 22 20:40:09 UTC 2018 romstage starting... Exception handlers installed. get_sdram_config: RAMCODE=1 Initializing SDRAM of type 2 with 792000KHz sdram_size_mb: Total SDRAM (MB): 2048 LPAE Translation tables are @ 40000000 Mapping address range [0x00000000:0x80000000) as uncached Mapping address range [0x40000000:0x40100000) as writeback Mapping address range [0x80000000:0x00000000) as writeback Mapping address range [0x90000000:0x90200000) as uncached Setting address range [0x00000000:0x00100000) as unmapped CBMEM: IMD: root @ fdfff000 254 entries. IMD: root @ fdffec00 62 entries. Manufacturer: ef SF: Detected W25Q32DW with sector size 0x1000, total 0x400000 creating vboot_handoff structure Copying FW preamble out: cmd=0xd: 03 f0 0d 00 00 00 00 00 in-header: 03 fc 01 00 00 00 00 00 in-data: handle_proto3_response: EC response with error code: 1 Chrome EC: UHEPI not supported out: cmd=0x87: 03 c0 87 00 00 00 04 00 c1 af 02 40 in-header: 03 59 00 00 04 00 00 00 in-data: 80 20 00 00 Chrome EC: clear events_b mask to 0x0000000021004000 out: cmd=0x8f: 03 09 8f 00 00 00 04 00 00 40 00 21 in-header: 03 fd 00 00 00 00 00 00 in-data: CBFS: 'VBOOT' located CBFS at [202000:235b00) CBFS: Locating 'fallback/ramstage' CBFS: Found @ offset 7700 size b2c7 oreboot-7d042db9 Mon Oct 22 20:40:09 UTC 2018 ramstage starting... sdram_size_mb: Total SDRAM (MB): 2048 Manufacturer: ef SF: Detected W25Q32DW with sector size 0x1000, total 0x400000 FMAP: Found \"FLASH\" version 1.1 at 100000. FMAP: base = 0 size = 400000 #areas = 21 FMAP: area RO_VPD found @ 1f0000 (65536 bytes) WARNING: RO_VPD is uninitialized or empty. FMAP: area RW_VPD found @ 2f8000 (32768 bytes) WARNING: RW_VPD is uninitialized or empty. Exception handlers installed. BS: BS_PRE_DEVICE times (us): entry 0 run 0 exit 1 BS: BS_DEV_INIT_CHIPS times (us): entry 1 run 1 exit 0 Enumerating buses... Show all devs... Before device enumeration. Root Device: enabled 1 CPU_CLUSTER: 0: enabled 1 Compare with tree... Root Device: enabled 1 CPU_CLUSTER: 0: enabled 1 Root Device scanning... root_dev_scan_bus for Root Device CPU_CLUSTER: 0 enabled root_dev_scan_bus for Root Device done scan_bus: scanning of bus Root Device took 10761 usecs done BS: BS_DEV_ENUMERATE times (us): entry 0 run 32806 exit 0 Allocating resources... Reading resources... Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done Done reading resources. Show resources in subtree (Root Device)...After reading. Root Device child on link 0 CPU_CLUSTER: 0 CPU_CLUSTER: 0 Setting resources... Root Device assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Show resources in subtree (Root Device)...After assigning values. Root Device child on link 0 CPU_CLUSTER: 0 CPU_CLUSTER: 0 Done allocating resources. BS: BS_DEV_RESOURCES times (us): entry 0 run 50078 exit 1 Enabling resources... done. BS: BS_DEV_ENABLE times (us): entry 1 run 2609 exit 0 Initializing devices... Root Device init ... USB controller @ 7d000000 set up with UTMI+ PHY USB controller @ 7d008000 set up with UTMI+ PHY Root Device init finished in 10476 usecs CPU_CLUSTER: 0 init ... Extracted contents: header: 00 ff ff ff ff ff ff 00 serial number: 06 af 2c 13 00 00 00 00 00 18 version: 01 03 basic params: 80 1d 10 78 0a chroma info: bb f5 94 55 54 90 27 23 50 54 established: 00 00 00 standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 descriptor 1: 26 1b 56 64 50 00 16 30 30 20 36 00 25 a4 10 00 00 18 descriptor 2: 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 20 descriptor 3: 00 00 00 fe 00 41 55 4f 0a 20 20 20 20 20 20 20 20 20 descriptor 4: 00 00 00 fe 00 42 31 33 33 58 54 4e 30 31 2e 33 20 0a extensions: 00 checksum: 4b Manufacturer: AUO Model 132c Serial Number 0 Made week 0 of 2014 EDID version: 1.3 Digital display Maximum image size: 29 cm x 16 cm Gamma: 220% Check DPMS levels Supported color formats: RGB 4:4:4, YCrCb 4:2:2 First detailed timing is preferred timing Established timings supported: Standard timings supported: Detailed timings Hex of detail: 261b5664500016303020360025a410000018 Detailed mode (IN HEX): Clock 69500 KHz, 125 mm x a4 mm 0556 0586 05a6 05ba hborder 0 0300 0303 0309 0316 vborder 0 -hsync -vsync Did detailed timing Hex of detail: 0000000f0000000000000000000000000020 Manufacturer-specified data, tag 15 Hex of detail: 000000fe0041554f0a202020202020202020 ASCII string: AUO Hex of detail: 000000fe004231333358544e30312e33200a ASCII string: B133XTN01.3 Checksum Checksum: 0x4b (valid) WARNING: EDID block does NOT fully conform to EDID 1.3. Missing name descriptor Missing monitor ranges tegra_dp_update_config: configuration updated by EDID. display_startup: backlight vdd setting gpio 000e007a to 1 Mapping address range [0xfe000000:0xfe300000) as writethrough LCD frame buffer at 4064MiB to 4067MiB clock_display: PLLD=139000000 ref=12000000, m/n/p/cpcon=3/139/2/3 MODE:1366x768@60.008Hz pclk=69500000 update_display_mode: PixelClock=69500000, ShiftClockDiv=1 DP config: cfg_name cfg_value Lane Count 1 SupportEnhancedFraming Y Bandwidth 10 bpp 18 EnhancedFraming Y Scramble_enabled N LinkBW 10 lane_count 1 activespolarity 0 active_count 37 tu_size 64 active_frac 15 watermark 18 hblank_sym 346 vblank_sym 5169 DP config: cfg_name cfg_value Lane Count 1 SupportEnhancedFraming Y Bandwidth 10 bpp 18 EnhancedFraming Y Scramble_enabled N LinkBW 10 lane_count 1 activespolarity 0 active_count 37 tu_size 64 active_frac 15 watermark 18 hblank_sym 346 vblank_sym 5169 Fast link trainging succeeded, link bw 10, lane 1 tegra_dc_sor_attach: sor is attached display_startup: enable panel backlight pwm display_startup: backlight enable setting gpio 0086003a to 1 display_startup: display init done. CPU: Tegra124 CPU_CLUSTER: 0 init finished in 546459 usecs Devices initialized Show all devs... After init. Root Device: enabled 1 CPU_CLUSTER: 0: enabled 1 BS: BS_DEV_INIT times (us): entry 0 run 575594 exit 0 FMAP: area RW_ELOG found @ 27c000 (16384 bytes) ELOG: NV offset 0x27c000 size 0x4000 ELOG: area is 4096 bytes, full threshold 3842, shrink size 1024 ELOG: Event(17) added with size 13 at 2022-08-02 07:46:49 UTC out: cmd=0xd: 03 f0 0d 00 00 00 00 00 in-header: 03 fc 01 00 00 00 00 00 in-data: handle_proto3_response: EC response with error code: 1 Chrome EC: UHEPI not supported out: cmd=0x87: 03 48 87 00 00 00 04 00 d5 b5 20 80 in-header: 03 59 00 00 04 00 00 00 in-data: 80 20 00 00 out: cmd=0x17: 03 ff 17 00 01 00 14 00 00 00 00 00 06 00 00 00 b7 87 20 80 c2 07 fe fd d5 b5 20 80 in-header: 03 5d 00 00 10 00 00 00 in-data: 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 ELOG: Event(A0) added with size 9 at 2022-08-02 07:46:49 UTC elog_add_boot_reason: Logged dev mode boot Finalize devices... Devices finalized BS: BS_POST_DEVICE times (us): entry 106784 run 3473 exit 1 BS: BS_OS_RESUME_CHECK times (us): entry 0 run 1 exit 0 Writing coreboot table at 0xfdeda000 0. 0000000040000000-0000000040004fff: RAMSTAGE 1. 000000004000e000-000000004000ffff: RAMSTAGE 2. 0000000080000000-00000000800fffff: RAM 3. 0000000080100000-000000008021bfff: RAMSTAGE 4. 000000008021c000-00000000fded9fff: RAM 5. 00000000fdeda000-00000000fdffffff: CONFIGURATION TABLES 6. 00000000fe000000-00000000ffffffff: RESERVED out: cmd=0x87: 03 42 87 00 00 00 04 00 30 00 00 00 in-header: 03 59 00 00 04 00 00 00 in-data: 80 20 00 00 Passing 6 GPIOs to payload: NAME | PORT | POLARITY | VALUE write protect | 0x00b00089 | low | low recovery | undefined | high | low lid | 0x00b3008c | high | undefined power | 0x00bf0080 | low | undefined EC in RW | 0x006500a4 | high | undefined reset | 0x00710045 | low | undefined Reading tristate GPIOs: 0 0 1 1 = 4 (standard base3 number system) Board TRISTATE ID: 4. Board ID: 4 CBFS: 'VBOOT' located CBFS at [202000:235b00) Wrote coreboot table at: fdeda000, 0x338 bytes, checksum b77d coreboot table: 848 bytes. IMD ROOT 0. fdfff000 00001000 IMD SMALL 1. fdffe000 00001000 CONSOLE 2. fdfde000 00020000 TIME STAMP 3. fdfdd000 00000910 VBOOT 4. fdfdc000 00000c0c RAMOOPS 5. fdedc000 00100000 COREBOOT 6. fdeda000 00002000 IMD small region: IMD ROOT 0. fdffec00 00000400 VBOOT SEL 1. fdffebe0 00000008 EC HOSTEVENT 2. fdffebc0 00000008 BS: BS_WRITE_TABLES times (us): entry 0 run 133951 exit 1 CBFS: 'VBOOT' located CBFS at [202000:235b00) CBFS: Locating 'fallback/payload' CBFS: Found @ offset 19200 size 1a89a Loading segment from ROM address 0x80100000 code (compression=1) New segment dstaddr 0xa0104040 memsize 0x85dca0 srcaddr 0x80100038 filesize 0x1a862 Loading Segment: addr: 0xa0104040 memsz: 0x000000000085dca0 filesz: 0x000000000001a862 using LZMA [ 0xa0104040, a0132244, 0xa0961ce0) <- 80100038 Clearing Segment: addr: 0x00000000a0132244 memsz: 0x000000000082fa9c Loading segment from ROM address 0x8010001c Entry Point 0xa0104041 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 0 run 110358 exit 0 Jumping to boot code at a0104041(fdeda000) CPU0: stack: 4000e000 - 40010000, lowest used address 4000f89c, stack used: 1892 bytes Starting depthcharge on nyan_big... [gtucker] Oct 24 2018 18:11:50 nyan_big: tftpboot 192.168.101.1 6945056/tftp-deploy-gwrw95_f/kernel/image.itb 6945056/tftp-deploy-gwrw95_f/kernel/cmdline tftpboot 192.168.101.1 6945056/tftp-deploy-gwrw95_f/kernel/image.itb 6945056/tftp-deploy-gwrw95_f/kernel/cmdline Waiting for link Initializing EHCI USB controller at 0x7d008100. Initializing EHCI USB controller at 0x7d000100. SMSC95xx: Initializing SMSC95xx: Done initializing Adding net device done. MAC: 94:eb:2c:03:05:15 Sending DHCP discover... done. Waiting for reply... SMSC95xx: Bulk read error 0xffffffff Receive failed. done. Sending DHCP request... done. Waiting for reply... done. My ip is 192.168.101.163 The DHCP server ip is 192.168.101.1 TFTP server IP predefined by user: 192.168.101.1 Bootfile predefined by user: 6945056/tftp-deploy-gwrw95_f/kernel/image.itb Sending tftp read request... done. Waiting for the transfer... 00000000 ################################################################ 00080000 ################################################################ 00100000 ################################################################ 00180000 ################################################################ 00200000 ################################################################ 00280000 ################################################################ 00300000 ################################################################ 00380000 ################################################################ 00400000 ################################################################ 00480000 ################################################################ 00500000 ################################################################ 00580000 ################################################################ 00600000 ################################################################ 00680000 ################################################################ 00700000 ################################################################ 00780000 ################################################################ 00800000 ################################################################ 00880000 ################################################################ 00900000 ################################################################ 00980000 ################################################################ 00a00000 ################################################################ 00a80000 ################################################################ 00b00000 ################################################################ 00b80000 ################################################################ 00c00000 ################################################################ 00c80000 ################################################################ 00d00000 ############################################################ done. The bootfile was 14118415 bytes long. Sending tftp read request... done. Waiting for the transfer... 00000000 # done. Command line loaded dynamically from TFTP file: 6945056/tftp-deploy-gwrw95_f/kernel/cmdline The command line is: earlyprintk=ttyS2,115200n8 console=tty1 console_msg_format=syslog earlycon console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp tftpserverip=192.168.101.1 Loading FIT. Image ramdisk-1 has 8771451 bytes. Image fdt-1 has 64329 bytes. Image kernel-1 has 5280792 bytes. Compat preference: google,nyan-big-rev4 google,nyan-big Config conf-1 (default), kernel kernel-1, fdt fdt-1, ramdisk ramdisk-1, compat google,nyan-big (match) nvidia,tegra124 Choosing best match conf-1 for compat google,nyan-big. Shutting down all USB controllers. Removing current net device Exiting depthcharge with code 4 at timestamp: 28037794 Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.302-cip70-st20 (KernelCI@build-j434607-arm-gcc-10-tegra-defconfig-9rt6c) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP PREEMPT Tue Aug 2 07:40:43 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Malformed early option 'earlycon' [ 0.000000] cma: Reserved 64 MiB at 0xf9c00000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] PERCPU: Embedded 11 pages/cpu @eefd2000 s15052 r8192 d21812 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514048 [ 0.000000] Kernel command line: earlyprintk=ttyS2,115200n8 console=tty1 console_msg_format=syslog earlycon console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp tftpserverip=192.168.101.1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1959724K/2062336K available (7544K kernel code, 351K rwdata, 2468K rodata, 328K init, 347K bss, 37076K reserved, 65536K cma-reserved, 1210368K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc09cf558 (10014 kB) [ 0.000000] .init : 0xc09d0000 - 0xc0a22000 ( 328 kB) [ 0.000000] .data : 0xc0a22000 - 0xc0a79d20 ( 352 kB) [ 0.000000] .bss : 0xc0a7c000 - 0xc0ad2c0c ( 348 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] L2C: failed to init: -19 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.006518] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016136] Switching to timer-based delay loop, resolution 1000ns [ 0.022799] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.028530] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039364] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047421] Switching to timer-based delay loop, resolution 83ns [ 0.053656] Console: colour dummy device 80x30 [ 0.058197] console [tty1] enabled [ 0.061472] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.071864] pid_max: default: 32768 minimum: 301 [ 0.076799] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083225] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.090861] Initializing cgroup subsys freezer [ 0.094847] Initializing cgroup subsys debug [ 0.099179] CPU: Testing write buffer coherency: ok [ 0.104104] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.113783] /cpus/cpu@0 missing clock-frequency property [ 0.119021] /cpus/cpu@1 missing clock-frequency property [ 0.124403] /cpus/cpu@2 missing clock-frequency property [ 0.129768] /cpus/cpu@3 missing clock-frequency property [ 0.135137] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.140871] Setting up static identity map for 0x80008440 - 0x800084d8 [ 0.197698] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.227714] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.227716] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.267735] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.267737] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.307766] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.307768] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.321158] Brought up 4 CPUs [ 0.324163] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.330407] CPU: All CPU(s) started in SVC mode. [ 0.335717] devtmpfs: initialized [ 0.355365] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.361404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.371077] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.377919] pinctrl core: initialized pinctrl subsystem [ 0.383290] NET: Registered protocol family 16 [ 0.387540] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.417344] cpuidle: using governor ladder [ 0.447352] cpuidle: using governor menu [ 0.456716] No ATAGs? [ 0.456912] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.465239] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.508235] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.512137] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.520375] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.526343] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.534582] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.540383] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.548621] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.554422] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.562731] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.569589] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.577915] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.583802] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.592722] vgaarb: loaded [ 0.595382] SCSI subsystem initialized [ 0.598895] usbcore: registered new interface driver usbfs [ 0.604172] usbcore: registered new interface driver hub [ 0.609514] usbcore: registered new device driver usb [ 0.616197] Linux video capture interface: v2.00 [ 0.619307] pps_core: LinuxPPS API ver. 1 registered [ 0.624297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.633516] PTP clock support registered [ 0.638139] Advanced Linux Sound Architecture Driver Initialized. [ 0.644204] Bluetooth: Core ver 2.21 [ 0.647287] NET: Registered protocol family 31 [ 0.651770] Bluetooth: HCI device and connection manager initialized [ 0.658196] Bluetooth: HCI socket layer initialized [ 0.663129] Bluetooth: L2CAP socket layer initialized [ 0.668260] Bluetooth: SCO socket layer initialized [ 0.673712] clocksource: Switched to clocksource arch_sys_counter [ 0.687579] NET: Registered protocol family 2 [ 0.690164] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.697999] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.704014] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.710530] TCP: Hash tables configured (established 8192 bind 8192) [ 0.717051] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.722880] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.729457] NET: Registered protocol family 1 [ 0.734004] RPC: Registered named UNIX socket transport module. [ 0.739681] RPC: Registered udp transport module. [ 0.744456] RPC: Registered tcp transport module. [ 0.749213] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.756172] Unpacking initramfs... [ 0.990595] Freeing initrd memory: 8568K [ 0.992994] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.003259] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.007691] NFS: Registering the id_resolver key type [ 1.012393] Key type id_resolver registered [ 1.016646] Key type id_legacy registered [ 1.022365] bounce: pool size: 64 pages [ 1.024617] io scheduler noop registered (default) [ 1.038481] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.044605] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 1.053629] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.061077] console [ttyS0] disabled [ 1.063390] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 75, base_baud = 25500000) is a Tegra [ 1.072334] console [ttyS0] enabled [ 1.072334] console [ttyS0] enabled [ 1.078640] bootconsole [earlycon0] disabled [ 1.078640] bootconsole [earlycon0] disabled [ 1.088336] [drm] Initialized drm 1.1.0 20060810 [ 1.095213] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.101698] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.108804] panel supply power not found, using dummy regulator [ 1.120050] loop: module loaded [ 1.123832] as3722 4-0040: AS3722 with revision 0x1 found [ 1.152502] cros-ec-spi spi32766.0: Cannot identify the EC: error -19 [ 1.158951] cros-ec-spi spi32766.0: cannot register EC [ 1.164844] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.173729] CAN device driver interface [ 1.177604] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.184560] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.190243] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.197688] usbcore: registered new interface driver pegasus [ 1.203393] usbcore: registered new interface driver asix [ 1.208837] usbcore: registered new interface driver ax88179_178a [ 1.214970] usbcore: registered new interface driver cdc_ether [ 1.220849] usbcore: registered new interface driver smsc75xx [ 1.226653] usbcore: registered new interface driver smsc95xx [ 1.232430] usbcore: registered new interface driver net1080 [ 1.238130] usbcore: registered new interface driver cdc_subset [ 1.244089] usbcore: registered new interface driver zaurus [ 1.249715] usbcore: registered new interface driver cdc_ncm [ 1.255605] +3.3V_SYS: supplied by +VDD_MUX [ 1.259814] +3.3V_RUN_CAM: supplied by +3.3V_SYS [ 1.264662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.271178] ehci-pci: EHCI PCI platform driver [ 1.275666] tegra-ehci: Tegra EHCI driver [ 1.279878] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.285290] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.293012] tegra-ehci 7d004000.usb: irq 92, io mem 0x7d004000 [ 1.313725] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.320232] hub 1-0:1.0: USB hub found [ 1.323996] hub 1-0:1.0: 1 port detected [ 1.328419] usbcore: registered new interface driver cdc_acm [ 1.334076] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.342114] usbcore: registered new interface driver cdc_wdm [ 1.347876] usbcore: registered new interface driver usb-storage [ 1.354154] mousedev: PS/2 mouse device common for all mice [ 1.361507] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.368377] as3722-rtc as3722-rtc: RTC interrupt 371 [ 1.375234] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.382387] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.388723] i2c /dev entries driver [ 1.392989] usbcore: registered new interface driver uvcvideo [ 1.398732] USB Video Class driver (1.1.1) [ 1.402821] gspca_main: v2.14.0 registered [ 1.407247] 0-004c supply vcc not found, using dummy regulator [ 1.415191] sdhci: Secure Digital Host Controller Interface driver [ 1.421360] sdhci: Copyright(c) Pierre Ossman [ 1.425720] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.431527] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.437206] mmc0: Unknown controller version (3). You may experience problems. [ 1.444543] +5V_SYS: supplied by +VDD_MUX [ 1.448576] +1.8V_VDDIO: supplied by +5V_SYS [ 1.452973] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.457861] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.462751] mmc0: Unknown controller version (3). You may experience problems. [ 1.470023] sdhci-tegra 700b0400.sdhci: No vmmc regulator found [ 1.476020] mmc0: Unknown controller version (3). You may experience problems. [ 1.483263] sdhci-tegra 700b0600.sdhci: No vmmc regulator found [ 1.489180] sdhci-tegra 700b0600.sdhci: No vqmmc regulator found [ 1.495215] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.543722] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.552123] usbcore: registered new interface driver usbhid [ 1.557713] usbhid: USB HID core driver [ 1.564116] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 1.573562] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.604208] max98090 0-0010: MAX98090 REVID=0x43 [ 1.610663] max98090 0-0010: use default 2.8v micbias [ 1.618265] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.636405] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input0 [ 1.644535] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input1 [ 1.652784] NET: Registered protocol family 10 [ 1.667273] mmc0: new high speed MMC card at address 0001 [ 1.672795] mip6: Mobile IPv6 [ 1.673130] mmcblk0: mmc0:0001 HAG2e 14.7 GiB [ 1.673332] mmcblk0boot0: mmc0:0001 HAG2e partition 1 4.00 MiB [ 1.673510] mmcblk0boot1: mmc0:0001 HAG2e partition 2 4.00 MiB [ 1.673699] mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB [ 1.698039] sit: IPv6 over IPv4 tunneling driver [ 1.703858] NET: Registered protocol family 17 [ 1.708321] NET: Registered protocol family 15 [ 1.712770] can: controller area network core (rev 20120528 abi 9) [ 1.719027] mmcblk0: p1 p2 p3 p4 p5 [ 1.719087] NET: Registered protocol family 29 [ 1.719095] can: raw protocol (rev 20120528) [ 1.719103] can: broadcast manager protocol (rev 20120528 t) [ 1.719114] can: netlink gateway (rev 20130117) max_hops=1 [ 1.722683] Bluetooth: RFCOMM socket layer initialized [ 1.722696] Bluetooth: RFCOMM ver 1.11 [ 1.722711] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.722718] Bluetooth: BNEP socket layer initialized [ 1.722721] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.722729] Bluetooth: HIDP socket layer initialized [ 1.722913] Key type dns_resolver registered [ 1.727484] Registering SWP/SWPB emulation handler [ 1.741874] +VDD_LED: supplied by +VDD_MUX [ 1.742411] +5V_HDMI_CON: supplied by +5V_SYS [ 1.742530] +1.05V_RUN: supplied by +5V_SYS [ 1.742563] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.742657] +3.3V_RUN: supplied by +3.3V_SYS [ 1.742690] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.743250] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.743959] panel supply power not found, using dummy regulator [ 1.744316] +5V_USB_HS: supplied by +5V_SYS [ 1.744561] +5V_USB_SS: supplied by +5V_SYS [ 1.744853] tegra-ehci 7d000000.usb: EHCI Host Controller [ 1.744874] tegra-ehci 7d000000.usb: new USB bus registered, assigned bus number 2 [ 1.841783] tegra-ehci 7d000000.usb: irq 91, io mem 0x7d000000 [ 1.863783] tegra-ehci 7d000000.usb: USB 2.0 started, EHCI 1.10 [ 1.867340] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 1.876490] input: HD WebCam as /devices/soc0/7d004000.usb/usb1/1-1/1-1:1.0/input/input2 [ 1.885258] hub 2-0:1.0: USB hub found [ 1.889054] hub 2-0:1.0: 1 port detected [ 1.893539] tegra-ehci 7d008000.usb: EHCI Host Controller [ 1.898988] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 3 [ 1.906872] tegra-ehci 7d008000.usb: irq 93, io mem 0x7d008000 [ 1.923809] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 1.930513] hub 3-0:1.0: USB hub found [ 1.934332] hub 3-0:1.0: 1 port detected [ 1.938994] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.944720] mmc1: Unknown controller version (3). You may experience problems. [ 1.952045] +3.3V_LP0: supplied by +3.3V_SYS [ 1.956560] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.962989] +1.8V_VDDIO: voltage operation not allowed [ 1.968161] mmc1: Switching to 3.3V signalling voltage failed [ 2.013824] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 2.022050] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.026974] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.031875] mmc2: Unknown controller version (3). You may experience problems. [ 2.039226] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.043913] sdhci-tegra 700b0400.sdhci: No vmmc regulator found [ 2.049864] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.084959] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 2.094327] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 2.122880] mmc1: new high speed SDIO card at address 0001 [ 2.195696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.202307] [drm] No driver support for vblank timestamp query. [ 2.263732] Console: switching to colour frame buffer device 170x48 [ 2.273662] drm drm: fb0: frame buffer device [ 2.313817] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.320362] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.327832] as3722-rtc as3722-rtc: setting system clock to 2022-08-02 07:47:18 UTC (1659426438) [ 2.683798] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.835522] hub 2-1:1.0: USB hub found [ 2.839517] hub 2-1:1.0: 5 ports detected [ 3.123799] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 3.257420] smsc95xx v1.0.4 [ 3.319179] smsc95xx 2-1.1:1.0 eth0: register 'smsc95xx' at usb-7d000000.usb-1.1, smsc95xx USB 2.0 Ethernet, 94:eb:2c:03:05:15 [ 3.418198] smsc95xx 2-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 3.425700] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.926645] smsc95xx 2-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 4.943748] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.963893] Sending DHCP requests .., OK [ 7.333807] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.163 [ 7.341955] IP-Config: Complete: [ 7.345201] device=eth0, hwaddr=94:eb:2c:03:05:15, ipaddr=192.168.101.163, mask=255.255.255.0, gw=192.168.101.1 [ 7.357128] host=192.168.101.163, domain=lava.cbg.collabora.co.uk, nis-domain=(none) [ 7.366703] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= [ 7.373782] nameserver0=192.168.101.1 [ 7.380964] +1.8V_RUN_CAM: disabling [ 7.386121] +1.2V_RUN_CAM_FRONT: disabling [ 7.391812] +1.05V_RUN_CAM_REAR: disabling [ 7.397533] +2.8V_RUN_TOUCH: disabling [ 7.402771] +2.8V_RUN_CAM_AF: disabling [ 7.408187] +1.8V_RUN_VPP_FUSE: disabling [ 7.413758] +5V_VDD_TS_SW: disabling [ 7.418913] ALSA device list: [ 7.423208] #0: tegra-hda at 0x70038000 irq 85 [ 7.429159] #1: GoogleNyanBig [ 7.433912] Freeing unused kernel memory: 328K [ 7.453112] devpts: called with bogus options Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 7.499602] udevd[138]: starting version 3.2.9 [ 7.506237] random: udevd: uninitialized urandom read (16 bytes read, 65 bits of entropy available) [ 7.516867] random: udevd: uninitialized urandom read (16 bytes read, 65 bits of entropy available) [ 7.527336] random: udevd: uninitialized urandom read (16 bytes read, 65 bits of entropy available) [ 7.541064] udevd[138]: specified user 'tss' unknown [ 7.547455] udevd[138]: specified group 'tss' unknown [ 7.555121] udevd[139]: starting eudev-3.2.9 [ 7.571646] random: udevd: uninitialized urandom read (16 bytes read, 65 bits of entropy available) [ 7.585182] udevd[139]: specified user 'tss' unknown [ 7.591548] udevd[139]: specified group 'tss' unknown [ 7.675830] random: udevd: uninitialized urandom read (16 bytes read, 65 bits of entropy available) done Saving random seed: [ 9.053161] random: dd: uninitialized urandom read (512 bytes read, 77 bits of entropy available) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: [ 9.100496] random: dropbear: uninitialized urandom read (32 bytes read, 77 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-6945056/environment . /lava-6945056/environment / # /lava-6945056/bin/lava-test-runner /lava-6945056/0 /lava-6945056/bin/lava-test-runner /lava-6945056/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-6945056/0/tests/0_dmesg + ca[ 9.678290] t uuid + UUID=6945056_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 9.703624] [ 9.727144] [ 9.749951] + set +x [ 9.760385] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-6945056/environment / # . /lava-6945056/environment/lava-6945056/bin/lava-test-runner /lava-6945056/1 / # /lava-6945056/bin/lava-test-runner /lava-6945056/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-6945056/1/tests/1_boo[ 10.216067] trr + cat uuid + UUID=6945056_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-6945056/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava[ 10.238291] -6945056/1/../bin/lava-test-case /lava-6945056/1/../bin/lava-test-case [ 10.263455] /lava-6945056/1/../bin/lava-test-case [ 10.279797] + set +x [ 10.292913] / #