Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.203 (127 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 795411/tftp-deploy-pfbyf10f/kernel/zImage tftp 0x82000000 795411/tftp-deploy-pfbyf10f/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.203 Filename '795411/tftp-deploy-pfbyf10f/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 3.5 MiB 5.1 MiB/s done Bytes transferred = 3714480 (38adb0 hex) => tftp 0x83000000 795411/tftp-deploy-pfbyf10f/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 795411/tftp-deploy-pfbyf10f/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.203 Filename '795411/tftp-deploy-pfbyf10f/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 10.6 MiB 5.1 MiB/s done Bytes transferred = 11130312 (a9d5c8 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 795411/tftp-deploy-pfbyf10f/dtb/am335x-boneblack.dtb tftp 0x88000000 795411/tftp-deploy-pfbyf10f/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.203 Filename '795411/tftp-deploy-pfbyf10f/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 32.8 KiB 4 MiB/s done Bytes transferred = 33561 (8319 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x38adb0 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2022-11-29 10:18:16 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 11130248 Bytes = 10.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b318 fixing up phy_id for ethernet1, old: 1, new: -1644890048 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.302-cip71-st28 (KernelCI@build-j605232-arm-gcc-10-omap2plus-defconfig-57j2s) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Tue Nov 29 10:12:35 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] Malformed early option 'earlycon' [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @df915000 s20648 r8192 d24408 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 470904K/522240K available (6971K kernel code, 752K rwdata, 2232K rodata, 444K init, 8189K bss, 34952K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0904f8c (9204 kB) [ 0.000000] .init : 0xc0905000 - 0xc0974000 ( 444 kB) [ 0.000000] .data : 0xc0974000 - 0xc0a303a8 ( 753 kB) [ 0.000000] .bss : 0xc0a33000 - 0xc12327a0 (8190 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000038] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000084] OMAP clocksource: timer1 at 24000000 Hz [ 0.000497] clocksource_probe: no matching clocksources found [ 0.001329] Console: colour dummy device 80x30 [ 0.001389] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001398] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001406] ... MAX_LOCK_DEPTH: 48 [ 0.001413] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001420] ... CLASSHASH_SIZE: 4096 [ 0.001427] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001434] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001441] ... CHAINHASH_SIZE: 32768 [ 0.001448] memory used by lock dependency info: 5167 kB [ 0.001456] per task-struct memory footprint: 1536 bytes [ 0.001481] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078740] pid_max: default: 32768 minimum: 301 [ 0.079137] Security Framework initialized [ 0.079252] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079264] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082031] Initializing cgroup subsys io [ 0.082124] Initializing cgroup subsys memory [ 0.082211] Initializing cgroup subsys devices [ 0.082324] Initializing cgroup subsys freezer [ 0.082395] Initializing cgroup subsys perf_event [ 0.082465] CPU: Testing write buffer coherency: ok [ 0.082607] CPU0: Spectre v2: using BPIALL workaround [ 0.083969] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.084083] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.087608] Brought up 1 CPUs [ 0.087632] SMP: Total of 1 processors activated (996.14 BogoMIPS). [ 0.087642] CPU: All CPU(s) started in SVC mode. [ 0.091572] devtmpfs: initialized [ 0.125447] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.176240] omap_hwmod: debugss: _wait_target_disable failed [ 0.231385] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.231458] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.233713] pinctrl core: initialized pinctrl subsystem [ 0.238621] NET: Registered protocol family 16 [ 0.243748] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.245869] cpuidle: using governor ladder [ 0.245901] cpuidle: using governor menu [ 0.257176] OMAP GPIO hardware version 0.1 [ 0.278183] No ATAGs? [ 0.278218] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.318306] edma 49000000.edma: TI EDMA DMA engine driver [ 0.322451] SCSI subsystem initialized [ 0.324351] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.324453] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.324701] pps_core: LinuxPPS API ver. 1 registered [ 0.324712] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.324763] PTP clock support registered [ 0.328911] clocksource: Switched to clocksource timer1 [ 0.456774] NET: Registered protocol family 2 [ 0.457284] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 0.459235] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.459325] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.459897] TCP: Hash tables configured (established 4096 bind 4096) [ 0.460115] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.460209] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.460760] NET: Registered protocol family 1 [ 0.462393] RPC: Registered named UNIX socket transport module. [ 0.462415] RPC: Registered udp transport module. [ 0.462426] RPC: Registered tcp transport module. [ 0.462435] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.464137] Trying to unpack rootfs image as initramfs... [ 1.404713] Freeing initrd memory: 10872K [ 1.405614] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.410199] audit: initializing netlink subsys (disabled) [ 1.410508] audit: type=2000 audit(1.400:1): initialized [ 1.414938] VFS: Disk quotas dquot_6.6.0 [ 1.415251] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.417522] NFS: Registering the id_resolver key type [ 1.417900] Key type id_resolver registered [ 1.417915] Key type id_legacy registered [ 1.418091] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.423699] io scheduler noop registered [ 1.423734] io scheduler deadline registered [ 1.423790] io scheduler cfq registered (default) [ 1.425787] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 1.428530] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 1.435614] omap_uart 44e09000.serial: no wakeirq for uart0 [ 1.436244] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0 [ 2.178553] console [ttyO0] enabled [ 2.217018] brd: module loaded [ 2.241881] loop: module loaded [ 2.247589] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.318869] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.325257] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.354642] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.365707] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 [ 2.377838] mousedev: PS/2 mouse device common for all mice [ 2.383875] i2c /dev entries driver [ 2.390199] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.469183] ledtrig-cpu: registered to indicate activity on CPUs [ 2.476656] oprofile: using arm/armv7 [ 2.481461] Initializing XFRM netlink socket [ 2.486406] NET: Registered protocol family 10 [ 2.494423] sit: IPv6 over IPv4 tunneling driver [ 2.501626] NET: Registered protocol family 17 [ 2.506360] NET: Registered protocol family 15 [ 2.511475] Key type dns_resolver registered [ 2.516102] omap_voltage_late_init: Voltage driver support not added [ 2.522824] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.531320] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.540503] ThumbEE CPU extension supported. [ 2.545005] Registering SWP/SWPB emulation handler [ 2.550097] SmartReflex Class3 initialized [ 2.605959] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.612479] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.622925] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.630072] mmc1: new high speed MMC card at address 0001 [ 2.637910] hctosys: unable to open rtc device (rtc0) [ 2.643324] sr_init: No PMIC hook to init smartreflex [ 2.648905] sr_init: platform driver register failed for SR [ 2.674352] net eth0: initializing cpsw version 1.12 (0) [ 2.682487] net eth0: phy found : id is : 0x7c0f1 [ 2.687529] libphy: PHY 4a101000.mdio:9df4f840 not found [ 2.693137] net eth0: phy \"4a101000.mdio:9df4f840\" not found on slave 1, err -19 [ 2.705436] mmcblk0: mmc1:0001 M62704 3.56 GiB [ 2.711533] mmcblk0boot0: mmc1:0001 M62704 partition 1 2.00 MiB [ 2.718544] mmcblk0boot1: mmc1:0001 M62704 partition 2 2.00 MiB [ 2.732949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.739574] mmcblk0: p1 [ 5.699457] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 5.708131] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.719007] Sending DHCP requests ., OK [ 5.809292] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.203 [ 5.817209] IP-Config: Complete: [ 5.820644] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.203, mask=255.255.255.0, gw=172.16.3.3 [ 5.831116] host=172.16.3.203, domain=denx.de, nis-domain=(none) [ 5.837841] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= [ 5.844858] nameserver0=172.16.3.3 [ 5.853707] Freeing unused kernel memory: 444K [ 5.936223] devpts: called with bogus options Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.262696] udevd[103]: starting version 3.2.9 [ 6.271077] random: udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.281467] random: udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.291816] random: udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 6.314287] udevd[103]: specified user 'tss' unknown [ 6.320075] udevd[103]: specified group 'tss' unknown [ 6.334826] udevd[104]: starting eudev-3.2.9 [ 6.882320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 6.926940] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 6.993066] 47401300.usb-phy supply vcc not found, using dummy regulator [ 7.003859] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 7.204740] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 7.714255] usbcore: registered new interface driver usbfs [ 7.720822] usbcore: registered new interface driver hub [ 7.726561] usbcore: registered new device driver usb [ 7.810576] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 7.817314] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 7.979476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.986594] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.994269] usb usb1: Product: MUSB HDRC host driver [ 7.999511] usb usb1: Manufacturer: Linux 4.4.302-cip71-st28 musb-hcd [ 8.006238] usb usb1: SerialNumber: musb-hdrc.1.auto [ 8.156107] hub 1-0:1.0: USB hub found [ 8.180184] hub 1-0:1.0: 1 port detected done Saving random seed: [ 8.444237] random: dd: uninitialized urandom read (512 bytes read, 25 bits of entropy available) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: [ 8.666614] random: dropbear: uninitialized urandom read (32 bytes read, 26 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-795411/environment . /lava-795411/environment / # /lava-795411/bin/lava-test-runner /lava-795411/0 /lava-795411/bin/lava-test-runner /lava-795411/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-795411/0/tests/0_dmesg + cat uuid + UUID=795411_1.5.2.4.1 + set +x [ 9.523328] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : clocksource_probe: no matching clocksources found [ 9.665646] [ 9.757484] [ 9.848445] + set +x [ 9.861196] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-795411/environment / # . /lava-795411/environment/lava-795411/bin/lava-test-runner /lava-795411/1 / # /lava-795411/bin/lava-test-runner /lava-795411/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-795411/1/tests/1_bootrr + cat uuid + UUID=795411_1.5.2.4.5 + set +x [ 10.653404] + export 'PATH=/opt/bootrr/helpers:/lava-795411/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-795411/1/../bin/lava-test-case [ 10.731345] /lava-795411/1/../bin/lava-test-case [ 10.819303] /lava-795411/1/../bin/lava-test-case [ 10.867828] + set +x [ 10.910599] / #