connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/994843/tftp-deploy-ks0n_qfk/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/994843/tftp-deploy-ks0n_qfk/dtb/imx6dl-riotboard.dtb /mnt/tftp/994843/tftp-deploy-ks0n_qfk/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/994843/tftp-deploy-ks0n_qfk/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/994843/tftp-deploy-ks0n_qfk/dtb/imx6dl-riotboard.dtb /mnt/tftp/994843/tftp-deploy-ks0n_qfk/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 92:2f:1a:20:94:68 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.186 Loading ARM Linux zImage '/mnt/tftp/994843/tftp-deploy-ks0n_qfk/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/994843/tftp-deploy-ks0n_qfk/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a89674 Loading devicetree from '/mnt/tftp/994843/tftp-deploy-ks0n_qfk/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a8a000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-cip77 (KernelCI@build-j147495-arm-gcc-10-multi-v7-defconfig-whdx5) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Tue Jul 11 14:53:57 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s14860 r8192 d22004 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 946992K/1048576K available (8649K kernel code, 985K rwdata, 3872K rodata, 1048K init, 320K bss, 36048K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e43750 (12526 kB) [ 0.000000] .init : 0xc0e44000 - 0xc0f4a000 (1048 kB) [ 0.000000] .data : 0xc0f4a000 - 0xc1040740 ( 986 kB) [ 0.000000] .bss : 0xc1043000 - 0xc1093260 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000024] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002223] Console: colour dummy device 80x30 [ 0.002249] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002264] pid_max: default: 32768 minimum: 301 [ 0.002373] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002385] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003036] CPU: Testing write buffer coherency: ok [ 0.003070] CPU0: Spectre v2: using BPIALL workaround [ 0.003340] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003417] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006527] Brought up 1 CPUs [ 0.006539] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006547] CPU: All CPU(s) started in SVC mode. [ 0.007283] devtmpfs: initialized [ 0.014550] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015274] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017724] pinctrl core: initialized pinctrl subsystem [ 0.019613] NET: Registered protocol family 16 [ 0.022314] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023865] cpuidle: using governor ladder [ 0.023884] cpuidle: using governor menu [ 0.024101] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.044285] No ATAGs? [ 0.044313] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.044322] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.047047] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.049288] Serial: AMBA PL011 UART driver [ 0.051107] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.063443] mxs-dma 110000.dma-apbh: initialized [ 0.068506] vgaarb: loaded [ 0.069451] SCSI subsystem initialized [ 0.069914] usbcore: registered new interface driver usbfs [ 0.069969] usbcore: registered new interface driver hub [ 0.070011] usbcore: registered new device driver usb [ 0.071735] pps_core: LinuxPPS API ver. 1 registered [ 0.071745] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071772] PTP clock support registered [ 0.072007] EDAC MC: Ver: 3.0.0 [ 0.074503] clocksource: Switched to clocksource mxc_timer1 [ 0.084329] NET: Registered protocol family 2 [ 0.084483] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.085516] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085598] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085735] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085874] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085914] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086115] NET: Registered protocol family 1 [ 0.086514] RPC: Registered named UNIX socket transport module. [ 0.086525] RPC: Registered udp transport module. [ 0.086532] RPC: Registered tcp transport module. [ 0.086539] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087042] Unpacking initramfs... [ 0.990046] Freeing initrd memory: 10792K [ 0.990446] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.002565] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.003431] NFS: Registering the id_resolver key type [ 1.003466] Key type id_resolver registered [ 1.003474] Key type id_legacy registered [ 1.003548] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.005166] bounce: pool size: 64 pages [ 1.005374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.005395] io scheduler noop registered [ 1.005409] io scheduler deadline registered [ 1.005448] io scheduler cfq registered (default) [ 1.026076] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.026093] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.080893] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.083367] SuperH (H)SCI(F) driver initialized [ 1.083966] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.084669] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.740081] console [ttymxc1] enabled [ 1.744269] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.753482] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.762686] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.772333] msm_serial: driver initialized [ 1.777145] STMicroelectronics ASC driver initialized [ 1.784036] [drm] Initialized drm 1.1.0 20060810 [ 1.798417] loop: module loaded [ 1.810177] CAN device driver interface [ 1.816242] 2188000.ethernet supply phy not found, using dummy regulator [ 1.829771] pps pps0: new PPS source ptp0 [ 1.852792] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.859140] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.866139] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.875177] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.882655] usbcore: registered new interface driver pegasus [ 1.888395] usbcore: registered new interface driver asix [ 1.893863] usbcore: registered new interface driver ax88179_178a [ 1.900023] usbcore: registered new interface driver cdc_ether [ 1.905948] usbcore: registered new interface driver smsc75xx [ 1.911776] usbcore: registered new interface driver smsc95xx [ 1.917593] usbcore: registered new interface driver net1080 [ 1.923318] usbcore: registered new interface driver cdc_subset [ 1.929297] usbcore: registered new interface driver zaurus [ 1.934966] usbcore: registered new interface driver cdc_ncm [ 1.942434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.948999] ehci-pci: EHCI PCI platform driver [ 1.953512] ehci-platform: EHCI generic platform driver [ 1.959001] ehci-omap: OMAP-EHCI Host Controller driver [ 1.964412] ehci-orion: EHCI orion driver [ 1.968602] SPEAr-ehci: EHCI SPEAr driver [ 1.972806] ehci-st: EHCI STMicroelectronics driver [ 1.977868] ehci-exynos: EHCI EXYNOS driver [ 1.982249] ehci-atmel: EHCI Atmel driver [ 1.986436] tegra-ehci: Tegra EHCI driver [ 1.990651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.996872] ohci-pci: OHCI PCI platform driver [ 2.001392] ohci-platform: OHCI generic platform driver [ 2.006829] ohci-omap3: OHCI OMAP3 driver [ 2.011022] SPEAr-ohci: OHCI SPEAr driver [ 2.015222] ohci-st: OHCI STMicroelectronics driver [ 2.020279] ohci-atmel: OHCI Atmel driver [ 2.024946] usbcore: registered new interface driver usb-storage [ 2.036221] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.041327] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.046253] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.059531] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.065751] hub 1-0:1.0: USB hub found [ 2.069589] hub 1-0:1.0: 1 port detected [ 2.074132] 2184200.usb supply vbus not found, using dummy regulator [ 2.084010] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.088955] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.104534] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.110732] hub 2-0:1.0: USB hub found [ 2.114568] hub 2-0:1.0: 1 port detected [ 2.119595] mousedev: PS/2 mouse device common for all mice [ 2.129544] i2c /dev entries driver [ 2.142587] sdhci: Secure Digital Host Controller Interface driver [ 2.148798] sdhci: Copyright(c) Pierre Ossman [ 2.155175] Synopsys Designware Multimedia Card Interface Driver [ 2.162422] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.168945] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.178136] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.183303] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.188825] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.229640] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.237444] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.246632] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.251802] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.259215] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.299650] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.307411] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.318957] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.359523] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.369342] ledtrig-cpu: registered to indicate activity on CPUs [ 2.375623] usbcore: registered new interface driver usbhid [ 2.381224] usbhid: USB HID core driver [ 2.390017] NET: Registered protocol family 10 [ 2.395017] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.406151] sit: IPv6 over IPv4 tunneling driver [ 2.411444] NET: Registered protocol family 17 [ 2.415938] can: controller area network core (rev 20120528 abi 9) [ 2.422375] NET: Registered protocol family 29 [ 2.426860] can: raw protocol (rev 20120528) [ 2.431155] can: broadcast manager protocol (rev 20120528 t) [ 2.436847] can: netlink gateway (rev 20130117) max_hops=1 [ 2.442794] Key type dns_resolver registered [ 2.447186] ThumbEE CPU extension supported. [ 2.451493] Registering SWP/SWPB emulation handler [ 2.471841] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.481663] hctosys: unable to open rtc device (rtc0) [ 2.495990] 2P5V: disabling [ 2.503812] Freeing unused kernel memory: 1048K [ 2.531233] hub 2-1:1.0: USB hub found [ 2.539045] hub 2-1:1.0: 4 ports detected [ 2.550343] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.560807] mmc2: unspecified timeout for CMD6 - use generic [ 2.574621] mmc2: unspecified timeout for CMD6 - use generic [ 2.584614] devpts: called with bogus options [ 2.589782] mmc2: Card stuck in programming state! __mmc_switch [ 2.598084] mmc2: unspecified timeout for CMD6 - use generic [ 2.607608] mmc2: new high speed MMC card at address 0001 [ 2.620807] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.629083] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.643198] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.654649] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.674672] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.684140] mmcblk0: retrying using single block read Starting klogd: [ 2.701531] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.710832] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.768470] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.777760] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.804716] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.813998] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.821372] udevd[93]: starting version 3.2.9 [ 2.826722] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.836105] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.845386] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.851945] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.861093] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.870365] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.879632] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.894911] udevd[93]: specified user 'tss' unknown [ 2.899972] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.909242] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.915816] udevd[93]: specified group 'tss' unknown [ 2.924240] udevd[94]: starting eudev-3.2.9 [ 2.939599] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.948886] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 2.969636] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.978921] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 2.984965] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.037262] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.046755] mmcblk0: retrying using single block read [ 3.104355] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.113658] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.174380] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.183685] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.245554] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.286936] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.329637] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.373948] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.414598] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.457411] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.466716] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.474071] mmcblk0: unable to read partition table [ 3.491757] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.732635] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.742616] mmcblk0: retrying using single block read [ 3.769684] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.789632] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.820799] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.857671] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.892351] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.929566] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 3.964618] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 3.999600] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.039104] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.049106] mmcblk0: retrying using single block read [ 4.091300] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.128973] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.164613] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.199673] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.236140] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.271875] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.308982] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.344636] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.354441] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.366549] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.376714] mmcblk0boot1: retrying using single block read [ 4.419030] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.456139] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.494407] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.529195] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.567194] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.603274] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.638718] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.674648] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.685526] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.695676] mmcblk0boot0: retrying using single block read [ 4.737837] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.773826] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.804402] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.814871] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.825290] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.835717] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.846062] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.854929] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.865320] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.876067] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.886197] mmcblk0boot1: retrying using single block read [ 4.892170] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.902512] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.911373] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.921713] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.930591] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.940937] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.949795] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.960189] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.970590] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.980931] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.989780] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.000169] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.010118] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.019801] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.029935] mmcblk0boot0: retrying using single block read [ 5.035909] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.046326] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.056735] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.067126] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.077530] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.087920] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.098323] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.108664] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.117518] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.127465] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.370747] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.380716] mmcblk0: retrying using single block read [ 5.386327] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.396607] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.406897] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.417165] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.427476] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.437771] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.448083] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.458331] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.467183] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.477659] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.487611] mmcblk0: retrying using single block read [ 5.493198] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.503469] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.513758] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.524041] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.534353] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.544674] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.554976] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.565269] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.575042] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.587512] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.597663] mmcblk0boot1: retrying using single block read [ 5.605604] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.616047] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.626467] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.636880] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.647287] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.657675] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.668079] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.678465] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.689203] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.699328] mmcblk0boot0: retrying using single block read [ 5.705297] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.715691] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.726106] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.736503] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.746911] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.757295] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.767694] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.778073] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.788796] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.798917] mmcblk0boot1: retrying using single block read [ 5.804885] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.815229] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.824082] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.834471] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.844882] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.855270] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.865676] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.876061] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.886460] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.896406] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.906015] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.916159] mmcblk0boot0: retrying using single block read [ 5.922135] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.932545] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.942966] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.953356] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.963759] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.974148] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.984563] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.994908] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.003827] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.013788] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.045241] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.143413] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-994843/environment . /lava-994843/environment / # /lava-994843/bin/lava-test-runner /lava-994843/0 /lava-994843/bin/lava-test-runner /lava-994843/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-994843/0/tests/0_dmesg + cat uuid [ 6.713913] + UUID=994843_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.761542] [ 6.805987] [ 6.850846] + set +x [ 6.860835] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-994843/environment / # . /lava-994843/environment/lava-994843/bin/lava-test-runner /lava-994843/1 / # /lava-994843/bin/lava-test-runner /lava-994843/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-994843/1/tests/1_bootrr + cat uuid [ 7.340825] + UUID=994843_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-994843/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-994843/1/../bin/lava-test-case [ 7.375917] /lava-994843/1/../bin/lava-test-case [ 7.415887] /lava-994843/1/../bin/lava-test-case [ 7.440875] + set +x [ 7.459712] / #