connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/997220/tftp-deploy-_cysu31l/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/997220/tftp-deploy-_cysu31l/dtb/imx6dl-riotboard.dtb /mnt/tftp/997220/tftp-deploy-_cysu31l/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/997220/tftp-deploy-_cysu31l/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/997220/tftp-deploy-_cysu31l/dtb/imx6dl-riotboard.dtb /mnt/tftp/997220/tftp-deploy-_cysu31l/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 46:1b:d9:5d:97:50 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.192 Loading ARM Linux zImage '/mnt/tftp/997220/tftp-deploy-_cysu31l/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/997220/tftp-deploy-_cysu31l/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a87e48 Loading devicetree from '/mnt/tftp/997220/tftp-deploy-_cysu31l/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a88000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-st43 (KernelCI@build-j4303-arm-gcc-10-multi-v7-defconfig-djblq) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Mon Aug 7 08:41:20 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s14860 r8192 d22004 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 947056K/1048576K available (8637K kernel code, 985K rwdata, 3828K rodata, 1048K init, 320K bss, 35984K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e355c0 (12470 kB) [ 0.000000] .init : 0xc0e36000 - 0xc0f3c000 (1048 kB) [ 0.000000] .data : 0xc0f3c000 - 0xc10324a0 ( 986 kB) [ 0.000000] .bss : 0xc1035000 - 0xc10850e0 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000023] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002196] Console: colour dummy device 80x30 [ 0.002223] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002235] pid_max: default: 32768 minimum: 301 [ 0.002344] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002356] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002998] CPU: Testing write buffer coherency: ok [ 0.003031] CPU0: Spectre v2: using BPIALL workaround [ 0.003303] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003379] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006449] Brought up 1 CPUs [ 0.006462] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006470] CPU: All CPU(s) started in SVC mode. [ 0.007200] devtmpfs: initialized [ 0.014442] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015127] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015154] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017522] pinctrl core: initialized pinctrl subsystem [ 0.019295] NET: Registered protocol family 16 [ 0.022038] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023597] cpuidle: using governor ladder [ 0.023616] cpuidle: using governor menu [ 0.023846] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.043778] No ATAGs? [ 0.043807] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.043815] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.046545] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.048783] Serial: AMBA PL011 UART driver [ 0.050595] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.062886] mxs-dma 110000.dma-apbh: initialized [ 0.067894] vgaarb: loaded [ 0.068795] SCSI subsystem initialized [ 0.069255] usbcore: registered new interface driver usbfs [ 0.069314] usbcore: registered new interface driver hub [ 0.069391] usbcore: registered new device driver usb [ 0.071047] pps_core: LinuxPPS API ver. 1 registered [ 0.071056] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071082] PTP clock support registered [ 0.071315] EDAC MC: Ver: 3.0.0 [ 0.073634] clocksource: Switched to clocksource mxc_timer1 [ 0.083466] NET: Registered protocol family 2 [ 0.083613] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.084629] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.084711] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.084843] TCP: Hash tables configured (established 8192 bind 8192) [ 0.084983] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085020] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.085212] NET: Registered protocol family 1 [ 0.085601] RPC: Registered named UNIX socket transport module. [ 0.085611] RPC: Registered udp transport module. [ 0.085617] RPC: Registered tcp transport module. [ 0.085624] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.086124] Unpacking initramfs... [ 0.983740] Freeing initrd memory: 10784K [ 0.984134] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.996300] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.997170] NFS: Registering the id_resolver key type [ 0.997206] Key type id_resolver registered [ 0.997214] Key type id_legacy registered [ 0.997291] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.998887] bounce: pool size: 64 pages [ 0.999109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.999129] io scheduler noop registered [ 0.999143] io scheduler deadline registered [ 0.999179] io scheduler cfq registered (default) [ 1.019751] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.019770] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.074490] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.076869] SuperH (H)SCI(F) driver initialized [ 1.077475] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.078144] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.733242] console [ttymxc1] enabled [ 1.737433] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.746656] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.755866] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.765512] msm_serial: driver initialized [ 1.770311] STMicroelectronics ASC driver initialized [ 1.777187] [drm] Initialized drm 1.1.0 20060810 [ 1.791531] loop: module loaded [ 1.803201] CAN device driver interface [ 1.809307] 2188000.ethernet supply phy not found, using dummy regulator [ 1.823909] pps pps0: new PPS source ptp0 [ 1.846809] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.853177] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.860176] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.869116] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.876595] usbcore: registered new interface driver pegasus [ 1.882340] usbcore: registered new interface driver asix [ 1.887807] usbcore: registered new interface driver ax88179_178a [ 1.893966] usbcore: registered new interface driver cdc_ether [ 1.899874] usbcore: registered new interface driver smsc75xx [ 1.905696] usbcore: registered new interface driver smsc95xx [ 1.911507] usbcore: registered new interface driver net1080 [ 1.917226] usbcore: registered new interface driver cdc_subset [ 1.923216] usbcore: registered new interface driver zaurus [ 1.928884] usbcore: registered new interface driver cdc_ncm [ 1.936377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.942942] ehci-pci: EHCI PCI platform driver [ 1.947453] ehci-platform: EHCI generic platform driver [ 1.952937] ehci-omap: OMAP-EHCI Host Controller driver [ 1.958349] ehci-orion: EHCI orion driver [ 1.962536] SPEAr-ehci: EHCI SPEAr driver [ 1.966729] ehci-st: EHCI STMicroelectronics driver [ 1.971790] ehci-exynos: EHCI EXYNOS driver [ 1.976187] ehci-atmel: EHCI Atmel driver [ 1.980374] tegra-ehci: Tegra EHCI driver [ 1.984589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.990809] ohci-pci: OHCI PCI platform driver [ 1.995326] ohci-platform: OHCI generic platform driver [ 2.000763] ohci-omap3: OHCI OMAP3 driver [ 2.004957] SPEAr-ohci: OHCI SPEAr driver [ 2.009155] ohci-st: OHCI STMicroelectronics driver [ 2.014217] ohci-atmel: OHCI Atmel driver [ 2.018798] usbcore: registered new interface driver usb-storage [ 2.030050] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.035156] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.040076] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.053658] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.059867] hub 1-0:1.0: USB hub found [ 2.063704] hub 1-0:1.0: 1 port detected [ 2.068245] 2184200.usb supply vbus not found, using dummy regulator [ 2.078124] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.083065] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.098662] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.104859] hub 2-0:1.0: USB hub found [ 2.108693] hub 2-0:1.0: 1 port detected [ 2.113717] mousedev: PS/2 mouse device common for all mice [ 2.123664] i2c /dev entries driver [ 2.136578] sdhci: Secure Digital Host Controller Interface driver [ 2.142789] sdhci: Copyright(c) Pierre Ossman [ 2.148897] Synopsys Designware Multimedia Card Interface Driver [ 2.156179] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.162687] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.171881] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.177050] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.182568] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.223774] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.231575] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.240763] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.245934] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.253348] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.293765] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.301518] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.313069] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.353650] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.363502] ledtrig-cpu: registered to indicate activity on CPUs [ 2.369778] usbcore: registered new interface driver usbhid [ 2.375377] usbhid: USB HID core driver [ 2.384129] NET: Registered protocol family 10 [ 2.389123] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.400240] sit: IPv6 over IPv4 tunneling driver [ 2.405557] NET: Registered protocol family 17 [ 2.410052] can: controller area network core (rev 20120528 abi 9) [ 2.416481] NET: Registered protocol family 29 [ 2.420963] can: raw protocol (rev 20120528) [ 2.425260] can: broadcast manager protocol (rev 20120528 t) [ 2.430952] can: netlink gateway (rev 20130117) max_hops=1 [ 2.436908] Key type dns_resolver registered [ 2.441296] ThumbEE CPU extension supported. [ 2.445604] Registering SWP/SWPB emulation handler [ 2.468032] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.477793] hctosys: unable to open rtc device (rtc0) [ 2.491598] 2P5V: disabling [ 2.499480] Freeing unused kernel memory: 1048K [ 2.526047] hub 2-1:1.0: USB hub found [ 2.532645] hub 2-1:1.0: 4 ports detected [ 2.543480] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.555088] mmc2: unspecified timeout for CMD6 - use generic [ 2.567537] mmc2: unspecified timeout for CMD6 - use generic [ 2.577444] devpts: called with bogus options [ 2.581926] mmc2: Card stuck in programming state! __mmc_switch [ 2.590998] mmc2: unspecified timeout for CMD6 - use generic [ 2.600499] mmc2: new high speed MMC card at address 0001 [ 2.613545] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.622005] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.635661] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.648803] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.667586] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.677049] mmcblk0: retrying using single block read Starting klogd: [ 2.694255] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.703542] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.751636] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.760936] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.793847] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.803127] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.813814] udevd[92]: starting version 3.2.9 [ 2.819403] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.828541] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.837814] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.844448] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.853593] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.862862] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.872128] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.887376] udevd[92]: specified user 'tss' unknown [ 2.892402] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.901681] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.908275] udevd[92]: specified group 'tss' unknown [ 2.916945] udevd[93]: starting eudev-3.2.9 [ 2.929300] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.938589] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 2.963800] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.973066] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 2.979105] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.033851] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.043298] mmcblk0: retrying using single block read [ 3.106103] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.115407] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.174089] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.183378] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.244726] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.285041] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.330542] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.371091] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.411519] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.453611] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.462938] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.470306] mmcblk0: unable to read partition table [ 3.489303] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.726665] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.736649] mmcblk0: retrying using single block read [ 3.763803] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.783757] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.818523] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.853725] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.890054] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.925504] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 3.963044] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 3.998231] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.035218] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.045212] mmcblk0: retrying using single block read [ 4.089981] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.125273] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.162832] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.198582] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.233737] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.269412] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.307137] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.342944] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.352764] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.365413] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.375576] mmcblk0boot0: retrying using single block read [ 4.419212] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.453804] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.492993] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.529701] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.565620] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.602383] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.638119] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.674964] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.685847] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.696001] mmcblk0boot1: retrying using single block read [ 4.738056] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.774993] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.795770] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.806216] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.816637] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.827068] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.837479] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.847872] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.858657] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.868774] mmcblk0boot0: retrying using single block read [ 4.874742] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.885142] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.895547] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.905936] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.916340] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.926731] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.937134] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.947476] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.956334] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.966283] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 4.975891] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.986040] mmcblk0boot1: retrying using single block read [ 4.992022] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.002431] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.012868] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.023272] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.033718] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.044109] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.054518] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.064862] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.073731] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.083675] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.323769] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.333722] mmcblk0: retrying using single block read [ 5.339327] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.349610] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.359901] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.370174] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.380485] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.390735] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.399593] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.409893] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.420205] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.430677] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.440628] mmcblk0: retrying using single block read [ 5.446212] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.456486] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.466769] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.477036] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.487345] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.497641] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.507953] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.518245] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.528029] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.541215] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.551363] mmcblk0boot1: retrying using single block read [ 5.558417] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.568932] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.579346] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.589758] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.600148] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.610554] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.620939] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.631339] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.641973] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.652102] mmcblk0boot0: retrying using single block read [ 5.658069] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.668412] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.677282] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.687677] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.698088] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.708480] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.718892] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.729281] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.739686] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.750307] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.760432] mmcblk0boot1: retrying using single block read [ 5.766400] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.776793] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.787194] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.797579] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.807983] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.818375] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.828791] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.839129] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.847978] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.857924] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.867473] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.877618] mmcblk0boot0: retrying using single block read [ 5.883600] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.894032] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.904426] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.914832] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.925219] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.935623] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.946012] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.956413] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.966360] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 5.997744] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.094917] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-997220/environment . /lava-997220/environment / # /lava-997220/bin/lava-test-runner /lava-997220/0 /lava-997220/bin/lava-test-runner /lava-997220/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-997220/0/tests/0_dmesg + cat uuid [ 6.665956] + UUID=997220_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.712831] [ 6.756610] [ 6.800527] + set +x [ 6.810200] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-997220/environment / # . /lava-997220/environment/lava-997220/bin/lava-test-runner /lava-997220/1 / # /lava-997220/bin/lava-test-runner /lava-997220/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-997220/1/tests/1_bootrr + cat uuid + UUID=997220_1.[ 7.289966] 5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-997220/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-997220/1/../bin/lava-test-case [ 7.326347] /lava-997220/1/../bin/lava-test-case [ 7.366102] /lava-997220/1/../bin/lava-test-case [ 7.391098] + set +x [ 7.409814] / #