[Enter `^Ec?' for help] U-Boot 2015.01-rc3-00172-gd0a58bc (Dec 28 2014 - 23:49:42) for ODROID-XU3 CPU: Exynos5800@800MHz Board: Odroid XU3 based on EXYNOS5422 I2C: ready DRAM: 1.8 GiB trace: copying 000a7308 bytes of early data from 50000000 to aeff0000 trace: enabled MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 ODROID-XU3 # usb start usb start (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ODROID-XU3 # setenv autoload no setenv autoload no ODROID-XU3 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.201.15 (5011 ms) ODROID-XU3 # setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 ODROID-XU3 # tftp 0x42000000 11661448/tftp-deploy-tmnjwx5o/kernel/zImage tftp 0x42000000 11661448/tftp-deploy-tmnjwx5o/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '11661448/tftp-deploy-tmnjwx5o/kernel/zImage'. Load address: 0x42000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 502.9 KiB/s done Bytes transferred = 6580080 (646770 hex) ODROID-XU3 # tftp 0x43300000 11661448/tftp-deploy-tmnjwx5o/ramdisk/ramdisk.cpio.gz.uboot tftp 0x43300000 11661448/tftp-deploy-tmnjwx5o/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '11661448/tftp-deploy-tmnjwx5o/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x43300000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 764.6 KiB/s done Bytes transferred = 11034321 (a85ed1 hex) ODROID-XU3 # setenv initrd_size ${filesize} setenv initrd_size ${filesize} ODROID-XU3 # tftp 0x43000000 11661448/tftp-deploy-tmnjwx5o/dtb/exynos5422-odroidxu3.dtb tftp 0x43000000 11661448/tftp-deploy-tmnjwx5o/dtb/exynos5422-odroidxu3.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '11661448/tftp-deploy-tmnjwx5o/dtb/exynos5422-odroidxu3.dtb'. Load address: 0x43000000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 7.8 KiB/s done Bytes transferred = 44984 (afb8 hex) ODROID-XU3 # setenv bootargs 'console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' setenv bootargs 'console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' ODROID-XU3 # bootz 0x42000000 0x43300000 0x43000000 bootz 0x42000000 0x43300000 0x43000000 Kernel image @ 0x42000000 [ 0x000000 - 0x646770 ] ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 11034257 Bytes = 10.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 4f57a000, end 4ffffe91 ... OK Loading Device Tree to 4f56c000, end 4f579fb7 ... OK Starting kernel ...(fake run for tracing) Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.4.302-st44 (KernelCI@build-j64052-arm-gcc-10-multi-v7-defconfig-bdmdt) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Mon Oct 2 17:12:01 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Hardkernel Odroid XU3 [ 0.000000] bootconsole [uart0] enabled [ 0.000000] cma: Reserved 64 MiB at 0xac000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef173000 s14860 r8192 d22004 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 453120 [ 0.000000] Kernel command line: console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1711860K/1818624K available (8637K kernel code, 985K rwdata, 3828K rodata, 1048K init, 320K bss, 41228K reserved, 65536K cma-reserved, 983040K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e355d0 (12470 kB) [ 0.000000] .init : 0xc0e36000 - 0xc0f3c000 (1048 kB) [ 0.000000] .data : 0xc0f3c000 - 0xc1032480 ( 986 kB) [ 0.000000] .bss : 0xc1035000 - 0xc10850e0 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.011432] Console: colour dummy device 80x30 [ 0.014416] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.024702] pid_max: default: 32768 minimum: 301 [ 0.029428] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.035898] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.043653] CPU: Testing write buffer coherency: ok [ 0.048084] CPU0: update cpu_capacity 448 [ 0.051769] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.057521] Setting up static identity map for 0x40209000 - 0x40209098 [ 0.064051] ARM CCI driver probed [ 0.067392] Exynos MCPM support installed [ 0.075772] CPU1: update cpu_capacity 448 [ 0.075780] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.076625] CPU2: update cpu_capacity 448 [ 0.076632] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.077421] CPU3: update cpu_capacity 448 [ 0.077427] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.078218] CPU4: update cpu_capacity 1535 [ 0.078225] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.078231] CPU4: Spectre v2: using ICIALLU workaround [ 0.121292] CPU5: update cpu_capacity 1535 [ 0.121299] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.121305] CPU5: Spectre v2: using ICIALLU workaround [ 0.136119] CPU6: update cpu_capacity 1535 [ 0.136126] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.136132] CPU6: Spectre v2: using ICIALLU workaround [ 0.150931] CPU7: update cpu_capacity 1535 [ 0.150937] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.150943] CPU7: Spectre v2: using ICIALLU workaround [ 0.164998] Brought up 8 CPUs [ 0.167879] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.174107] CPU: All CPU(s) started in HYP mode. [ 0.178696] CPU: Virtualization extensions available. [ 0.184775] devtmpfs: initialized [ 0.204485] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 0.211817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.220402] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.230320] pinctrl core: initialized pinctrl subsystem [ 0.236312] NET: Registered protocol family 16 [ 0.241811] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.261239] cpuidle: using governor ladder [ 0.276236] cpuidle: using governor menu [ 0.284058] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 0.304610] EXYNOS5420 PMU initialized [ 0.315899] No ATAGs? [ 0.316593] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.324680] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.336778] Serial: AMBA PL011 UART driver [ 0.376354] vgaarb: loaded [ 0.378743] SCSI subsystem initialized [ 0.381923] usbcore: registered new interface driver usbfs [ 0.386864] usbcore: registered new interface driver hub [ 0.392129] usbcore: registered new device driver usb [ 0.398665] s3c-i2c 12c60000.i2c: slave address 0x00 [ 0.402185] s3c-i2c 12c60000.i2c: bus frequency set to 65 KHz [ 0.408829] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.413350] s3c-i2c 12c80000.i2c: slave address 0x00 [ 0.418121] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.424242] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.430098] pps_core: LinuxPPS API ver. 1 registered [ 0.434061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.443179] PTP clock support registered [ 0.447328] EDAC MC: Ver: 3.0.0 [ 0.453343] clocksource: Switched to clocksource mct-frc [ 0.471855] NET: Registered protocol family 2 [ 0.474887] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.482304] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.488524] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.495009] TCP: Hash tables configured (established 8192 bind 8192) [ 0.501229] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.507111] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.513588] NET: Registered protocol family 1 [ 0.518021] RPC: Registered named UNIX socket transport module. [ 0.523645] RPC: Registered udp transport module. [ 0.528283] RPC: Registered tcp transport module. [ 0.532989] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.539963] Unpacking initramfs... [ 1.473646] Freeing initrd memory: 10776K [ 1.493635] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.499126] NFS: Registering the id_resolver key type [ 1.503067] Key type id_resolver registered [ 1.507205] Key type id_legacy registered [ 1.511264] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.517623] bounce: pool size: 64 pages [ 1.520291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.527391] io scheduler noop registered [ 1.531273] io scheduler deadline registered [ 1.535545] io scheduler cfq registered (default) [ 1.545384] 12100000.phy supply vbus not found, using dummy regulator [ 1.550432] 12100000.phy supply vbus-boost not found, using dummy regulator [ 1.557671] 12500000.phy supply vbus not found, using dummy regulator [ 1.563759] 12500000.phy supply vbus-boost not found, using dummy regulator [ 1.587014] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 1.592183] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 1.603919] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.609187] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.621138] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.626394] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.635745] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 1.641380] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.732258] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.740101] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 1.747911] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a [ 1.756741] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 1.764189] console [ttySAC2] enabled [ 1.764189] console [ttySAC2] enabled [ 1.771428] bootconsole [uart0] disabled [ 1.771428] bootconsole [uart0] disabled [ 1.779632] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 1.788771] SuperH (H)SCI(F) driver initialized [ 1.793896] msm_serial: driver initialized [ 1.797367] STMicroelectronics ASC driver initialized [ 1.804112] [drm] Initialized drm 1.1.0 20060810 [ 1.819878] loop: module loaded [ 1.832679] CAN device driver interface [ 1.837059] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.842558] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.852585] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.858577] usbcore: registered new interface driver pegasus [ 1.864220] usbcore: registered new interface driver asix [ 1.869574] usbcore: registered new interface driver ax88179_178a [ 1.875640] usbcore: registered new interface driver cdc_ether [ 1.881474] usbcore: registered new interface driver smsc75xx [ 1.887185] usbcore: registered new interface driver smsc95xx [ 1.892884] usbcore: registered new interface driver net1080 [ 1.898518] usbcore: registered new interface driver cdc_subset [ 1.904407] usbcore: registered new interface driver zaurus [ 1.909990] usbcore: registered new interface driver cdc_ncm [ 1.916978] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.921459] exynos-dwc3 usb@12400000: no suspend clk specified [ 1.928388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.933662] ehci-pci: EHCI PCI platform driver [ 1.938102] ehci-platform: EHCI generic platform driver [ 1.943586] ehci-omap: OMAP-EHCI Host Controller driver [ 1.948698] ehci-orion: EHCI orion driver [ 1.952659] SPEAr-ehci: EHCI SPEAr driver [ 1.956676] ehci-st: EHCI STMicroelectronics driver [ 1.961529] ehci-exynos: EHCI EXYNOS driver [ 1.965819] ehci-atmel: EHCI Atmel driver [ 1.969671] tegra-ehci: Tegra EHCI driver [ 1.973679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.979601] ohci-pci: OHCI PCI platform driver [ 1.984056] ohci-platform: OHCI generic platform driver [ 1.989451] ohci-omap3: OHCI OMAP3 driver [ 1.993418] SPEAr-ohci: OHCI SPEAr driver [ 1.997378] ohci-st: OHCI STMicroelectronics driver [ 2.002260] ohci-atmel: OHCI Atmel driver [ 2.006682] usbcore: registered new interface driver usb-storage [ 2.014096] mousedev: PS/2 mouse device common for all mice [ 2.024020] i2c /dev entries driver [ 2.045068] vdd_ldo9: ramp_delay not set [ 2.056043] vdd_ldo13: ramp_delay not set [ 2.063463] vdd_ldo15: ramp_delay not set [ 2.074364] vdd_sd: ramp_delay not set [ 2.135669] sdhci: Secure Digital Host Controller Interface driver [ 2.140388] sdhci: Copyright(c) Pierre Ossman [ 2.147003] Synopsys Designware Multimedia Card Interface Driver [ 2.152251] dwmmc_exynos 12200000.mmc: num-slots property not found, assuming 1 slot is available [ 2.160453] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 2.167289] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 2.173656] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 2.179068] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 68,64 bit host data width,64 deep fifo [ 2.188458] dwmmc_exynos 12200000.mmc: No vmmc regulator found [ 2.194096] dwmmc_exynos 12200000.mmc: No vqmmc regulator found [ 2.200018] dwmmc_exynos 12200000.mmc: Got CD GPIO [ 2.204921] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 2.238618] dwmmc_exynos 12200000.mmc: 1 slots initialized [ 2.242875] dwmmc_exynos 12220000.mmc: num-slots property not found, assuming 1 slot is available [ 2.251537] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 2.258402] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 2.264745] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 2.270154] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 69,64 bit host data width,64 deep fifo [ 2.279512] dwmmc_exynos 12220000.mmc: No vmmc regulator found [ 2.285187] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.318430] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.323837] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.330969] leds_pwm pwmleds: unable to request PWM for green:mmc0: -517 [ 2.336542] ledtrig-cpu: registered to indicate activity on CPUs [ 2.342396] usbcore: registered new interface driver usbhid [ 2.347733] usbhid: USB HID core driver [ 2.358231] NET: Registered protocol family 10 [ 2.361993] sit: IPv6 over IPv4 tunneling driver [ 2.366515] NET: Registered protocol family 17 [ 2.370245] can: controller area network core (rev 20120528 abi 9) [ 2.376627] NET: Registered protocol family 29 [ 2.380810] can: raw protocol (rev 20120528) [ 2.385054] can: broadcast manager protocol (rev 20120528 t) [ 2.390692] can: netlink gateway (rev 20130117) max_hops=1 [ 2.396585] Key type dns_resolver registered [ 2.400872] ThumbEE CPU extension supported. [ 2.404646] Registering SWP/SWPB emulation handler [ 2.412062] exynos-dwc3 usb@12000000: no suspend clk specified [ 2.417936] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 2.424049] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 2.633148] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 2.637231] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 2.645363] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.653557] xhci-hcd xhci-hcd.2.auto: irq 136, io mem 0x12000000 [ 2.660541] hub 1-0:1.0: USB hub found [ 2.663189] hub 1-0:1.0: 1 port detected [ 2.667538] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 2.672561] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 2.680281] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.689329] hub 2-0:1.0: USB hub found [ 2.691954] hub 2-0:1.0: 1 port detected [ 2.697322] exynos-dwc3 usb@12400000: no suspend clk specified [ 2.702069] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 2.703166] usb_phy_generic.3.auto supply vcc not found, using dummy regulator [ 2.703556] usb_phy_generic.4.auto supply vcc not found, using dummy regulator [ 2.727518] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 2.737966] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 2.746351] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 2.757588] mmc0: new HS400 MMC card at address 0001 [ 2.761963] mmcblk0: mmc0:0001 SDW32G 29.1 GiB [ 2.766125] mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB [ 2.772017] mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB [ 2.777794] mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB [ 2.788304] mmcblk0: p1 p2 [ 2.905701] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 2.909750] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3 [ 2.917823] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.926098] xhci-hcd xhci-hcd.5.auto: irq 137, io mem 0x12400000 [ 2.932946] hub 3-0:1.0: USB hub found [ 2.935778] hub 3-0:1.0: 1 port detected [ 2.940059] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 2.945105] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 [ 2.952805] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.961697] hub 4-0:1.0: USB hub found [ 2.964541] hub 4-0:1.0: 1 port detected [ 2.973199] leds_pwm pwmleds: unable to request PWM for green:mmc0: -517 [ 2.979378] hctosys: unable to open rtc device (rtc0) [ 12.128352] random: nonblocking pool is initialized [ 15.071048] Freeing unused kernel memory: 1048K [ 15.098260] devpts: called with bogus options Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 15.178912] udevd[132]: starting version 3.2.9 [ 15.190111] udevd[132]: specified user 'tss' unknown [ 15.193739] udevd[132]: specified group 'tss' unknown [ 15.200981] udevd[133]: starting eudev-3.2.9 [ 15.427638] s3c-rtc 101e0000.rtc: failed to find rtc source clock [ 15.433498] ohci-exynos: OHCI EXYNOS driver [ 15.436784] 12130000.phy supply vbus not found, using dummy regulator [ 15.445245] exynos-ohci 12120000.usb: USB Host Controller [ 15.445788] exynos-ehci 12110000.usb: EHCI Host Controller [ 15.445828] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 5 [ 15.451901] exynos-ehci 12110000.usb: irq 116, io mem 0x12110000 [ 15.458489] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 15.460446] hub 5-0:1.0: USB hub found [ 15.460545] hub 5-0:1.0: 3 ports detected [ 15.464210] leds_pwm pwmleds: unable to request PWM for green:mmc0: -517 [ 15.467458] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 15.467686] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 15.468417] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc0 [ 15.470585] leds_pwm pwmleds: unable to request PWM for green:mmc0: -517 [ 15.488493] leds_pwm pwmleds: unable to request PWM for green:mmc0: -517 [ 15.499759] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc1 [ 15.502268] leds_pwm pwmleds: unable to request PWM for green:mmc0: -517 [ 15.534050] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 6 [ 15.542055] exynos-ohci 12120000.usb: irq 116, io mem 0x12120000 [ 15.603733] hub 6-0:1.0: USB hub found [ 15.606045] hub 6-0:1.0: 3 ports detected [ 15.617894] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) [ 15.624812] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 15.631387] [drm] No driver support for vblank timestamp query. [ 15.637282] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 15.688434] usb 5-1: new high-speed USB device number 2 using exynos-ehci [ 15.824952] hub 5-1:1.0: USB hub found [ 15.827324] hub 5-1:1.0: 5 ports detected done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # #[ 16.113398] usb 5-1.1: new high-speed USB device number 3 using exynos-ehci / # export SHELL=/bin/sh export SHELL=/bin/sh[ 16.226763] smsc95xx v1.0.4 / # . /lava-11661448/environment [ 16.278315] smsc95xx 5-1.1:1.0 eth0: register 'smsc95xx' at usb-12110000.usb-1.1, smsc95xx USB 2.0 Ethernet, 5a:14:39:d3:f6:7c . /lava-11661448/environment / # /lava-11661448/bin/lava-test-runner /lava-11661448/0 /lava-11661448/bin/lava-test-runner /lava-11661448/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11661448/0/tests/0_dmesg + cat uuid[ 16.547276] + UUID=11661448_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 16.586307] [ 16.625239] [ 16.660996] + set +x [ 16.669146] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11661448/environment / # . /lava-11661448/environment/lava-11661448/bin/lava-test-runner /lava-11661448/1 / # /lava-11661448/bin/lava-test-runner /lava-11661448/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11661448/1/tests/1_bootrr + cat uu[ 17.144682] id + UUID=11661448_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11661448/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-11661448/1/../bin/lava-test-case [ 17.176918] /lava-11661448/1/../bin/lava-test-case [ 17.211836] /lava-11661448/1/../bin/lava-test-case [ 17.232343] + set[ 17.250305] +x / # �