connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1007217/tftp-deploy-ttes315v/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1007217/tftp-deploy-ttes315v/dtb/imx6dl-riotboard.dtb /mnt/tftp/1007217/tftp-deploy-ttes315v/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1007217/tftp-deploy-ttes315v/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1007217/tftp-deploy-ttes315v/dtb/imx6dl-riotboard.dtb /mnt/tftp/1007217/tftp-deploy-ttes315v/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 5e:09:09:59:2a:76 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.48 Loading ARM Linux zImage '/mnt/tftp/1007217/tftp-deploy-ttes315v/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1007217/tftp-deploy-ttes315v/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a87fea Loading devicetree from '/mnt/tftp/1007217/tftp-deploy-ttes315v/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a88000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-st45 (KernelCI@build-j7744-arm-gcc-10-multi-v7-defconfig-sh6l8) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Sun Nov 5 04:53:11 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s14860 r8192 d22004 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 947056K/1048576K available (8637K kernel code, 985K rwdata, 3828K rodata, 1048K init, 320K bss, 35984K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e355d8 (12470 kB) [ 0.000000] .init : 0xc0e36000 - 0xc0f3c000 (1048 kB) [ 0.000000] .data : 0xc0f3c000 - 0xc1032480 ( 986 kB) [ 0.000000] .bss : 0xc1035000 - 0xc10850e0 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002202] Console: colour dummy device 80x30 [ 0.002229] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002243] pid_max: default: 32768 minimum: 301 [ 0.002355] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002365] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003014] CPU: Testing write buffer coherency: ok [ 0.003048] CPU0: Spectre v2: using BPIALL workaround [ 0.003316] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003394] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006470] Brought up 1 CPUs [ 0.006482] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006490] CPU: All CPU(s) started in SVC mode. [ 0.007229] devtmpfs: initialized [ 0.014509] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015217] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017576] pinctrl core: initialized pinctrl subsystem [ 0.019447] NET: Registered protocol family 16 [ 0.022112] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023689] cpuidle: using governor ladder [ 0.023706] cpuidle: using governor menu [ 0.023936] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.043718] No ATAGs? [ 0.043747] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.043755] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.046538] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.048827] Serial: AMBA PL011 UART driver [ 0.050669] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.062995] mxs-dma 110000.dma-apbh: initialized [ 0.068110] vgaarb: loaded [ 0.069025] SCSI subsystem initialized [ 0.069527] usbcore: registered new interface driver usbfs [ 0.069585] usbcore: registered new interface driver hub [ 0.069627] usbcore: registered new device driver usb [ 0.071328] pps_core: LinuxPPS API ver. 1 registered [ 0.071338] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071364] PTP clock support registered [ 0.071597] EDAC MC: Ver: 3.0.0 [ 0.073944] clocksource: Switched to clocksource mxc_timer1 [ 0.083804] NET: Registered protocol family 2 [ 0.083991] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.084974] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085059] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085194] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085332] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085367] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.085559] NET: Registered protocol family 1 [ 0.085943] RPC: Registered named UNIX socket transport module. [ 0.085957] RPC: Registered udp transport module. [ 0.085963] RPC: Registered tcp transport module. [ 0.085971] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.086460] Unpacking initramfs... [ 0.987788] Freeing initrd memory: 10784K [ 0.988198] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.000337] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.001202] NFS: Registering the id_resolver key type [ 1.001244] Key type id_resolver registered [ 1.001252] Key type id_legacy registered [ 1.001327] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.002860] bounce: pool size: 64 pages [ 1.003077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.003097] io scheduler noop registered [ 1.003111] io scheduler deadline registered [ 1.003150] io scheduler cfq registered (default) [ 1.023921] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.024022] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.079138] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.081539] SuperH (H)SCI(F) driver initialized [ 1.082149] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.082805] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.737899] console [ttymxc1] enabled [ 1.742098] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.751314] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.760530] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.770176] msm_serial: driver initialized [ 1.774973] STMicroelectronics ASC driver initialized [ 1.781871] [drm] Initialized drm 1.1.0 20060810 [ 1.796268] loop: module loaded [ 1.808068] CAN device driver interface [ 1.814171] 2188000.ethernet supply phy not found, using dummy regulator [ 1.829217] pps pps0: new PPS source ptp0 [ 1.852188] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.858540] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.865539] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.874568] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.882049] usbcore: registered new interface driver pegasus [ 1.887794] usbcore: registered new interface driver asix [ 1.893256] usbcore: registered new interface driver ax88179_178a [ 1.899415] usbcore: registered new interface driver cdc_ether [ 1.905329] usbcore: registered new interface driver smsc75xx [ 1.911155] usbcore: registered new interface driver smsc95xx [ 1.916965] usbcore: registered new interface driver net1080 [ 1.922689] usbcore: registered new interface driver cdc_subset [ 1.928676] usbcore: registered new interface driver zaurus [ 1.934352] usbcore: registered new interface driver cdc_ncm [ 1.941840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.948403] ehci-pci: EHCI PCI platform driver [ 1.952918] ehci-platform: EHCI generic platform driver [ 1.958404] ehci-omap: OMAP-EHCI Host Controller driver [ 1.963806] ehci-orion: EHCI orion driver [ 1.967994] SPEAr-ehci: EHCI SPEAr driver [ 1.972182] ehci-st: EHCI STMicroelectronics driver [ 1.977254] ehci-exynos: EHCI EXYNOS driver [ 1.981650] ehci-atmel: EHCI Atmel driver [ 1.985835] tegra-ehci: Tegra EHCI driver [ 1.990053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.996273] ohci-pci: OHCI PCI platform driver [ 2.000792] ohci-platform: OHCI generic platform driver [ 2.006229] ohci-omap3: OHCI OMAP3 driver [ 2.010424] SPEAr-ohci: OHCI SPEAr driver [ 2.014619] ohci-st: OHCI STMicroelectronics driver [ 2.019678] ohci-atmel: OHCI Atmel driver [ 2.024278] usbcore: registered new interface driver usb-storage [ 2.035542] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.040649] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.045573] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.058967] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.065170] hub 1-0:1.0: USB hub found [ 2.069007] hub 1-0:1.0: 1 port detected [ 2.073539] 2184200.usb supply vbus not found, using dummy regulator [ 2.083408] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.088353] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.103971] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.110166] hub 2-0:1.0: USB hub found [ 2.114000] hub 2-0:1.0: 1 port detected [ 2.119037] mousedev: PS/2 mouse device common for all mice [ 2.129053] i2c /dev entries driver [ 2.142096] sdhci: Secure Digital Host Controller Interface driver [ 2.148306] sdhci: Copyright(c) Pierre Ossman [ 2.154428] Synopsys Designware Multimedia Card Interface Driver [ 2.161720] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.168230] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.177429] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.182597] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.188120] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.229083] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.236887] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.246075] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.251244] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.258656] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.299074] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.306831] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.318385] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.358964] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.368798] ledtrig-cpu: registered to indicate activity on CPUs [ 2.375080] usbcore: registered new interface driver usbhid [ 2.380681] usbhid: USB HID core driver [ 2.389479] NET: Registered protocol family 10 [ 2.394473] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.405586] sit: IPv6 over IPv4 tunneling driver [ 2.410914] NET: Registered protocol family 17 [ 2.415410] can: controller area network core (rev 20120528 abi 9) [ 2.421832] NET: Registered protocol family 29 [ 2.426317] can: raw protocol (rev 20120528) [ 2.430612] can: broadcast manager protocol (rev 20120528 t) [ 2.436306] can: netlink gateway (rev 20130117) max_hops=1 [ 2.442268] Key type dns_resolver registered [ 2.446654] ThumbEE CPU extension supported. [ 2.450961] Registering SWP/SWPB emulation handler [ 2.473349] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.483103] hctosys: unable to open rtc device (rtc0) [ 2.497035] 2P5V: disabling [ 2.504906] Freeing unused kernel memory: 1048K [ 2.531523] hub 2-1:1.0: USB hub found [ 2.537952] hub 2-1:1.0: 4 ports detected [ 2.548766] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.560402] mmc2: unspecified timeout for CMD6 - use generic [ 2.572846] mmc2: unspecified timeout for CMD6 - use generic [ 2.582780] devpts: called with bogus options [ 2.587264] mmc2: Card stuck in programming state! __mmc_switch [ 2.596310] mmc2: unspecified timeout for CMD6 - use generic [ 2.605853] mmc2: new high speed MMC card at address 0001 [ 2.618842] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.627341] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.640924] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.654110] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.672322] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.681788] mmcblk0: retrying using single block read Starting klogd: [ 2.698808] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.708111] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.767725] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.777018] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.799244] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.808526] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.817319] udevd[92]: starting version 3.2.9 [ 2.822681] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.832079] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.841362] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.847936] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.857081] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.866356] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.875622] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.890879] udevd[92]: specified user 'tss' unknown [ 2.895943] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.905219] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.911787] udevd[92]: specified group 'tss' unknown [ 2.920556] udevd[93]: starting eudev-3.2.9 [ 2.934605] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.943896] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 2.964076] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.973359] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 2.979407] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.026619] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.036093] mmcblk0: retrying using single block read [ 3.099099] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.108378] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.169789] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.179086] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.236634] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.279096] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.320319] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.365832] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.403795] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.448364] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.457671] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.465048] mmcblk0: unable to read partition table [ 3.485688] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.727750] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.737736] mmcblk0: retrying using single block read [ 3.769113] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.787848] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.824104] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.861312] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.895770] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.933433] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 3.969084] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.005289] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.042260] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.052241] mmcblk0: retrying using single block read [ 4.097254] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.133188] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.169484] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.204050] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.241420] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.276331] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.312397] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.349719] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.359544] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.373261] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.383429] mmcblk0boot0: retrying using single block read [ 4.427867] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.463704] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.500496] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.537528] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.574063] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.609085] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.646566] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.683285] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.694300] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.704454] mmcblk0boot1: retrying using single block read [ 4.746349] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.783261] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.800777] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.811211] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.821650] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.832075] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.842492] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.852884] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.863643] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.873765] mmcblk0boot0: retrying using single block read [ 4.879741] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.890089] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.898968] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.909368] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.919708] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.928580] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.939111] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.949501] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.959910] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.970297] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.980246] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 4.989961] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.000101] mmcblk0boot1: retrying using single block read [ 5.006087] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.016518] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.026933] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.037337] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.047741] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.058127] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.068529] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.078917] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.088863] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.330128] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.340099] mmcblk0: retrying using single block read [ 5.345711] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.355993] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.366283] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.376558] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.386871] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.397169] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.407473] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.417722] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.426593] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.437068] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.447021] mmcblk0: retrying using single block read [ 5.452609] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.462885] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.473173] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.483443] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.493754] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.504103] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.514411] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.524721] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.534498] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.546948] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.557098] mmcblk0boot1: retrying using single block read [ 5.565053] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.575489] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.585913] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.596327] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.606735] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.617126] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.627529] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.637916] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.648658] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.658780] mmcblk0boot0: retrying using single block read [ 5.664750] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.675138] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.685548] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.695942] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.706348] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.716735] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.727140] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.737532] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.748267] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.758392] mmcblk0boot1: retrying using single block read [ 5.764363] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.774751] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.785156] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.795544] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.805946] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.816286] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.825138] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.835480] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.844347] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.854689] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.863534] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.873482] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.883027] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.893175] mmcblk0boot0: retrying using single block read [ 5.899152] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.909570] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.919983] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.930382] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.940784] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.951125] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.959985] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.970380] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.980790] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.990737] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.022142] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.119858] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1007217/environment . /lava-1007217/environment / # /lava-1007217/bin/lava-test-runner /lava-1007217/0 /lava-1007217/bin/lava-test-runner /lava-1007217/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1007217/0/tests/0_dmesg + cat uuid [ 6.691285] + UUID=1007217_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.738737] [ 6.783092] [ 6.827473] + set +x [ 6.837123] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1007217/environment / # . /lava-1007217/environment/lava-1007217/bin/lava-test-runner /lava-1007217/1 / # /lava-1007217/bin/lava-test-runner /lava-1007217/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1007217/1/tests/1_bootrr + cat uuid [ 7.317432] + UUID=1007217_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1007217/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1007217/1/../bin/lava-test-case [ 7.352299] /lava-1007217/1/../bin/lava-test-case [ 7.392056] /lava-1007217/1/../bin/lava-test-case [ 7.416806] + set +x [ 7.435543] / #