connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1031794/tftp-deploy-zy0vxuo5/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031794/tftp-deploy-zy0vxuo5/dtb/imx6dl-riotboard.dtb /mnt/tftp/1031794/tftp-deploy-zy0vxuo5/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1031794/tftp-deploy-zy0vxuo5/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031794/tftp-deploy-zy0vxuo5/dtb/imx6dl-riotboard.dtb /mnt/tftp/1031794/tftp-deploy-zy0vxuo5/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 5a:0c:e4:2b:15:26 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.27 Loading ARM Linux zImage '/mnt/tftp/1031794/tftp-deploy-zy0vxuo5/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1031794/tftp-deploy-zy0vxuo5/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a88703 Loading devicetree from '/mnt/tftp/1031794/tftp-deploy-zy0vxuo5/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a89000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-st49 (KernelCI@build-j130071-arm-gcc-10-multi-v7-defconfig-nq5mc) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Tue Mar 5 03:40:22 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c1030540, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s14860 r8192 d22004 u45056 [ 0.000000] pcpu-alloc: s14860 r8192 d22004 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 947052K/1048576K available (8641K kernel code, 985K rwdata, 3828K rodata, 1044K init, 320K bss, 35988K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e3660c (12474 kB) [ 0.000000] .init : 0xc0e37000 - 0xc0f3c000 (1044 kB) [ 0.000000] .data : 0xc0f3c000 - 0xc1032700 ( 986 kB) [ 0.000000] .bss : 0xc1035000 - 0xc10850e0 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002115] Console: colour dummy device 80x30 [ 0.002140] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002152] pid_max: default: 32768 minimum: 301 [ 0.002262] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002272] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002915] CPU: Testing write buffer coherency: ok [ 0.002949] CPU0: Spectre v2: using BPIALL workaround [ 0.003220] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003299] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006343] Brought up 1 CPUs [ 0.006356] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006364] CPU: All CPU(s) started in SVC mode. [ 0.007107] devtmpfs: initialized [ 0.014354] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015115] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017446] pinctrl core: initialized pinctrl subsystem [ 0.019242] NET: Registered protocol family 16 [ 0.022024] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023592] cpuidle: using governor ladder [ 0.023609] cpuidle: using governor menu [ 0.023838] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.043793] No ATAGs? [ 0.043822] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.043830] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.046565] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.048823] Serial: AMBA PL011 UART driver [ 0.050677] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.062975] mxs-dma 110000.dma-apbh: initialized [ 0.068069] vgaarb: loaded [ 0.068978] SCSI subsystem initialized [ 0.069156] libata version 3.00 loaded. [ 0.069476] usbcore: registered new interface driver usbfs [ 0.069538] usbcore: registered new interface driver hub [ 0.069584] usbcore: registered new device driver usb [ 0.071295] pps_core: LinuxPPS API ver. 1 registered [ 0.071304] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071330] PTP clock support registered [ 0.071571] EDAC MC: Ver: 3.0.0 [ 0.073929] clocksource: Switched to clocksource mxc_timer1 [ 0.083867] NET: Registered protocol family 2 [ 0.084054] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.085046] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085129] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085261] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085403] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085440] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.085632] NET: Registered protocol family 1 [ 0.086020] RPC: Registered named UNIX socket transport module. [ 0.086031] RPC: Registered udp transport module. [ 0.086038] RPC: Registered tcp transport module. [ 0.086044] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.086072] PCI: CLS 0 bytes, default 64 [ 0.086540] Unpacking initramfs... [ 0.990767] Freeing initrd memory: 10788K [ 0.991176] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.003362] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.004305] NFS: Registering the id_resolver key type [ 1.004369] Key type id_resolver registered [ 1.004377] Key type id_legacy registered [ 1.004453] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.006047] bounce: pool size: 64 pages [ 1.006272] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.006293] io scheduler noop registered [ 1.006306] io scheduler deadline registered [ 1.006345] io scheduler cfq registered (default) [ 1.026944] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.026963] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.082234] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.084686] SuperH (H)SCI(F) driver initialized [ 1.085302] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.085964] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.788923] console [ttymxc1] enabled [ 1.793108] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.802329] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.811549] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.821180] msm_serial: driver initialized [ 1.825991] STMicroelectronics ASC driver initialized [ 1.832917] [drm] Initialized drm 1.1.0 20060810 [ 1.847340] loop: module loaded [ 1.859058] CAN device driver interface [ 1.865089] 2188000.ethernet supply phy not found, using dummy regulator [ 1.879207] pps pps0: new PPS source ptp0 [ 1.902252] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.908603] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.915605] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.924543] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.932022] usbcore: registered new interface driver pegasus [ 1.937769] usbcore: registered new interface driver asix [ 1.943231] usbcore: registered new interface driver ax88179_178a [ 1.949387] usbcore: registered new interface driver cdc_ether [ 1.955297] usbcore: registered new interface driver smsc75xx [ 1.961119] usbcore: registered new interface driver smsc95xx [ 1.966929] usbcore: registered new interface driver net1080 [ 1.972652] usbcore: registered new interface driver cdc_subset [ 1.978644] usbcore: registered new interface driver zaurus [ 1.984319] usbcore: registered new interface driver cdc_ncm [ 1.991758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.998321] ehci-pci: EHCI PCI platform driver [ 2.002836] ehci-platform: EHCI generic platform driver [ 2.008319] ehci-omap: OMAP-EHCI Host Controller driver [ 2.013725] ehci-orion: EHCI orion driver [ 2.017914] SPEAr-ehci: EHCI SPEAr driver [ 2.022100] ehci-st: EHCI STMicroelectronics driver [ 2.027162] ehci-exynos: EHCI EXYNOS driver [ 2.031556] ehci-atmel: EHCI Atmel driver [ 2.035738] tegra-ehci: Tegra EHCI driver [ 2.039956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.046177] ohci-pci: OHCI PCI platform driver [ 2.050692] ohci-platform: OHCI generic platform driver [ 2.056123] ohci-omap3: OHCI OMAP3 driver [ 2.060310] SPEAr-ohci: OHCI SPEAr driver [ 2.064500] ohci-st: OHCI STMicroelectronics driver [ 2.069561] ohci-atmel: OHCI Atmel driver [ 2.074147] usbcore: registered new interface driver usb-storage [ 2.085406] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.090514] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.095437] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.108954] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.115165] hub 1-0:1.0: USB hub found [ 2.119000] hub 1-0:1.0: 1 port detected [ 2.123550] 2184200.usb supply vbus not found, using dummy regulator [ 2.133429] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.138373] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.153957] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.160153] hub 2-0:1.0: USB hub found [ 2.163990] hub 2-0:1.0: 1 port detected [ 2.169036] mousedev: PS/2 mouse device common for all mice [ 2.178877] i2c /dev entries driver [ 2.191750] sdhci: Secure Digital Host Controller Interface driver [ 2.197961] sdhci: Copyright(c) Pierre Ossman [ 2.204069] Synopsys Designware Multimedia Card Interface Driver [ 2.211271] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.217777] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.226973] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.232144] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.237667] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.279069] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.286874] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.296061] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.301230] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.308643] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.349059] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.356821] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.368380] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.408945] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.418669] ledtrig-cpu: registered to indicate activity on CPUs [ 2.424944] usbcore: registered new interface driver usbhid [ 2.430544] usbhid: USB HID core driver [ 2.439225] NET: Registered protocol family 10 [ 2.444234] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.455363] sit: IPv6 over IPv4 tunneling driver [ 2.460692] NET: Registered protocol family 17 [ 2.465188] can: controller area network core (rev 20120528 abi 9) [ 2.471614] NET: Registered protocol family 29 [ 2.476099] can: raw protocol (rev 20120528) [ 2.480393] can: broadcast manager protocol (rev 20120528 t) [ 2.486088] can: netlink gateway (rev 20130117) max_hops=1 [ 2.492036] Key type dns_resolver registered [ 2.496431] ThumbEE CPU extension supported. [ 2.500738] Registering SWP/SWPB emulation handler [ 2.523195] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.533011] hctosys: unable to open rtc device (rtc0) [ 2.547056] 2P5V: disabling [ 2.554898] Freeing unused kernel memory: 1044K [ 2.581394] hub 2-1:1.0: USB hub found [ 2.587846] hub 2-1:1.0: 4 ports detected [ 2.598132] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.610475] mmc2: unspecified timeout for CMD6 - use generic [ 2.622924] mmc2: unspecified timeout for CMD6 - use generic [ 2.632786] devpts: called with bogus options [ 2.637270] mmc2: Card stuck in programming state! __mmc_switch [ 2.646343] mmc2: unspecified timeout for CMD6 - use generic [ 2.655891] mmc2: new high speed MMC card at address 0001 [ 2.668820] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.677329] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.690950] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.702119] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.722566] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.732043] mmcblk0: retrying using single block read Starting klogd: [ 2.749412] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.758697] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.806604] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.815907] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.849197] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.858477] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.868560] udevd[92]: starting version 3.2.9 [ 2.874227] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.883350] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.892622] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.899266] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.908399] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.917679] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.926945] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.942184] udevd[92]: specified user 'tss' unknown [ 2.947209] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.956491] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.963088] udevd[92]: specified group 'tss' unknown [ 2.971805] udevd[93]: starting eudev-3.2.9 [ 2.984624] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.993940] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 3.019090] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.028355] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 3.034396] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.098062] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.107527] mmcblk0: retrying using single block read [ 3.169073] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.178355] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.239478] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.248767] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.309083] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.350445] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.390832] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.430921] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.474920] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.514946] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.524259] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.531681] mmcblk0: unable to read partition table [ 3.551156] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.781706] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.791680] mmcblk0: retrying using single block read [ 3.819113] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.839272] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.870748] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.908216] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.944076] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.979038] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.016446] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.051806] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.088723] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.098703] mmcblk0: retrying using single block read [ 4.143364] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.179069] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.216301] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.251733] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.288308] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.324030] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.358987] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.395763] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.405591] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.418278] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.428448] mmcblk0boot0: retrying using single block read [ 4.472363] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.508380] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.544732] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.580675] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.619289] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.654070] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.690580] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.728769] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.739809] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.749968] mmcblk0boot1: retrying using single block read [ 4.792173] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.829041] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.853313] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.863771] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.874208] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.884645] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.895057] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.905450] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.916207] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.926331] mmcblk0boot0: retrying using single block read [ 4.932296] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.942695] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.953101] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.963444] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.972326] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.982720] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.993130] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.003471] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.012404] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.022814] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.032770] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.042460] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.052610] mmcblk0boot1: retrying using single block read [ 5.058592] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.069154] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.079500] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.088358] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.098751] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.109159] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.119500] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.128351] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.138740] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.149153] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.159099] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.398540] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.408513] mmcblk0: retrying using single block read [ 5.414133] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.424444] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.434718] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.445004] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.455253] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.464128] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.474442] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.484692] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.493553] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.503857] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.514511] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.524470] mmcblk0: retrying using single block read [ 5.530066] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.540339] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.550628] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.560899] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.571209] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.581506] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.591816] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.602110] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.611883] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.624320] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.634461] mmcblk0boot1: retrying using single block read [ 5.642332] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.652787] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.663221] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.673646] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.684063] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.694453] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.704861] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.715204] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.724080] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.734718] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.744847] mmcblk0boot0: retrying using single block read [ 5.750820] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.761210] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.771618] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.782026] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.792438] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.802827] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.813232] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.823620] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.834366] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.844484] mmcblk0boot1: retrying using single block read [ 5.850452] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.860845] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.871247] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.881640] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.892053] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.902442] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.912841] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.923230] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.933178] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.942712] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.952858] mmcblk0boot0: retrying using single block read [ 5.958841] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.969263] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.979611] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.988469] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.998864] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.009274] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.019679] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.030092] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.040498] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.050449] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.082298] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.179847] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1031794/environment . /lava-1031794/environment / # /lava-1031794/bin/lava-test-runner /lava-1031794/0 /lava-1031794/bin/lava-test-runner /lava-1031794/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1031794/0/tests/0_dmesg + cat uuid [ 6.748175] + UUID=1031794_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.795353] [ 6.839219] [ 6.883210] + set +x [ 6.892954] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1031794/environment / # . /lava-1031794/environment/lava-1031794/bin/lava-test-runner /lava-1031794/1 / # /lava-1031794/bin/lava-test-runner /lava-1031794/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1031794/1/tests/1_bootrr + cat uuid + [ 7.370888] UUID=1031794_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1031794/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1031794/1/../bin/lava-test-case [ 7.406302] /lava-1031794/1/../bin/lava-test-case [ 7.445622] /lava-1031794/1/../bin/lava-test-case [ 7.470646] + set +x [ 7.489318] / #