connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1031106/tftp-deploy-u44uegn6/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031106/tftp-deploy-u44uegn6/dtb/imx6dl-riotboard.dtb /mnt/tftp/1031106/tftp-deploy-u44uegn6/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1031106/tftp-deploy-u44uegn6/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031106/tftp-deploy-u44uegn6/dtb/imx6dl-riotboard.dtb /mnt/tftp/1031106/tftp-deploy-u44uegn6/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 22:4e:d5:9e:fa:ac eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.229 Loading ARM Linux zImage '/mnt/tftp/1031106/tftp-deploy-u44uegn6/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1031106/tftp-deploy-u44uegn6/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a87781 Loading devicetree from '/mnt/tftp/1031106/tftp-deploy-u44uegn6/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a88000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-st49 (KernelCI@build-j126623-arm-gcc-10-multi-v7-defconfig-rgkrk) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Fri Mar 1 17:05:26 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c1030540, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s14860 r8192 d22004 u45056 [ 0.000000] pcpu-alloc: s14860 r8192 d22004 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 947056K/1048576K available (8641K kernel code, 985K rwdata, 3828K rodata, 1044K init, 320K bss, 35984K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e3660c (12474 kB) [ 0.000000] .init : 0xc0e37000 - 0xc0f3c000 (1044 kB) [ 0.000000] .data : 0xc0f3c000 - 0xc1032700 ( 986 kB) [ 0.000000] .bss : 0xc1035000 - 0xc10850e0 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000022] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002103] Console: colour dummy device 80x30 [ 0.002128] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002140] pid_max: default: 32768 minimum: 301 [ 0.002247] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002259] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002915] CPU: Testing write buffer coherency: ok [ 0.002949] CPU0: Spectre v2: using BPIALL workaround [ 0.003219] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003298] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006361] Brought up 1 CPUs [ 0.006374] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006383] CPU: All CPU(s) started in SVC mode. [ 0.007124] devtmpfs: initialized [ 0.014357] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015129] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017505] pinctrl core: initialized pinctrl subsystem [ 0.019305] NET: Registered protocol family 16 [ 0.022057] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023631] cpuidle: using governor ladder [ 0.023648] cpuidle: using governor menu [ 0.023880] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.043808] No ATAGs? [ 0.043838] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.043846] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.046580] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.048825] Serial: AMBA PL011 UART driver [ 0.050697] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.062985] mxs-dma 110000.dma-apbh: initialized [ 0.067904] vgaarb: loaded [ 0.068811] SCSI subsystem initialized [ 0.068988] libata version 3.00 loaded. [ 0.069274] usbcore: registered new interface driver usbfs [ 0.069330] usbcore: registered new interface driver hub [ 0.069371] usbcore: registered new device driver usb [ 0.071109] pps_core: LinuxPPS API ver. 1 registered [ 0.071118] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071147] PTP clock support registered [ 0.071379] EDAC MC: Ver: 3.0.0 [ 0.073713] clocksource: Switched to clocksource mxc_timer1 [ 0.083610] NET: Registered protocol family 2 [ 0.083801] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.084788] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.084872] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085008] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085146] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085184] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.085378] NET: Registered protocol family 1 [ 0.085763] RPC: Registered named UNIX socket transport module. [ 0.085774] RPC: Registered udp transport module. [ 0.085780] RPC: Registered tcp transport module. [ 0.085785] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.085812] PCI: CLS 0 bytes, default 64 [ 0.086280] Unpacking initramfs... [ 0.989778] Freeing initrd memory: 10784K [ 0.990184] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.002434] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.003301] NFS: Registering the id_resolver key type [ 1.003338] Key type id_resolver registered [ 1.003346] Key type id_legacy registered [ 1.003418] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.005017] bounce: pool size: 64 pages [ 1.005235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.005256] io scheduler noop registered [ 1.005270] io scheduler deadline registered [ 1.005308] io scheduler cfq registered (default) [ 1.025856] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.025874] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.081248] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.083631] SuperH (H)SCI(F) driver initialized [ 1.084293] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.084952] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.787898] console [ttymxc1] enabled [ 1.792092] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.801310] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.810519] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.820147] msm_serial: driver initialized [ 1.824964] STMicroelectronics ASC driver initialized [ 1.831843] [drm] Initialized drm 1.1.0 20060810 [ 1.846217] loop: module loaded [ 1.857832] CAN device driver interface [ 1.863916] 2188000.ethernet supply phy not found, using dummy regulator [ 1.878987] pps pps0: new PPS source ptp0 [ 1.901839] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.908186] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.915185] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.924128] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.931605] usbcore: registered new interface driver pegasus [ 1.937352] usbcore: registered new interface driver asix [ 1.942815] usbcore: registered new interface driver ax88179_178a [ 1.948974] usbcore: registered new interface driver cdc_ether [ 1.954885] usbcore: registered new interface driver smsc75xx [ 1.960710] usbcore: registered new interface driver smsc95xx [ 1.966526] usbcore: registered new interface driver net1080 [ 1.972248] usbcore: registered new interface driver cdc_subset [ 1.978236] usbcore: registered new interface driver zaurus [ 1.983911] usbcore: registered new interface driver cdc_ncm [ 1.991360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.997926] ehci-pci: EHCI PCI platform driver [ 2.002438] ehci-platform: EHCI generic platform driver [ 2.007928] ehci-omap: OMAP-EHCI Host Controller driver [ 2.013339] ehci-orion: EHCI orion driver [ 2.017522] SPEAr-ehci: EHCI SPEAr driver [ 2.021706] ehci-st: EHCI STMicroelectronics driver [ 2.026769] ehci-exynos: EHCI EXYNOS driver [ 2.031157] ehci-atmel: EHCI Atmel driver [ 2.035342] tegra-ehci: Tegra EHCI driver [ 2.039552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.045772] ohci-pci: OHCI PCI platform driver [ 2.050291] ohci-platform: OHCI generic platform driver [ 2.055724] ohci-omap3: OHCI OMAP3 driver [ 2.059915] SPEAr-ohci: OHCI SPEAr driver [ 2.064106] ohci-st: OHCI STMicroelectronics driver [ 2.069160] ohci-atmel: OHCI Atmel driver [ 2.073750] usbcore: registered new interface driver usb-storage [ 2.084993] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.090102] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.095021] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.108736] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.114957] hub 1-0:1.0: USB hub found [ 2.118795] hub 1-0:1.0: 1 port detected [ 2.123332] 2184200.usb supply vbus not found, using dummy regulator [ 2.133211] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.138153] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.153739] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.159938] hub 2-0:1.0: USB hub found [ 2.163774] hub 2-0:1.0: 1 port detected [ 2.168823] mousedev: PS/2 mouse device common for all mice [ 2.178630] i2c /dev entries driver [ 2.191488] sdhci: Secure Digital Host Controller Interface driver [ 2.197699] sdhci: Copyright(c) Pierre Ossman [ 2.203764] Synopsys Designware Multimedia Card Interface Driver [ 2.210979] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.217484] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.226679] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.231847] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.237367] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.278856] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.286662] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.295848] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.301017] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.308428] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.348844] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.356603] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.368154] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.408729] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.418427] ledtrig-cpu: registered to indicate activity on CPUs [ 2.424700] usbcore: registered new interface driver usbhid [ 2.430298] usbhid: USB HID core driver [ 2.438964] NET: Registered protocol family 10 [ 2.443967] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.455087] sit: IPv6 over IPv4 tunneling driver [ 2.460409] NET: Registered protocol family 17 [ 2.464902] can: controller area network core (rev 20120528 abi 9) [ 2.471330] NET: Registered protocol family 29 [ 2.475815] can: raw protocol (rev 20120528) [ 2.480110] can: broadcast manager protocol (rev 20120528 t) [ 2.485804] can: netlink gateway (rev 20130117) max_hops=1 [ 2.491747] Key type dns_resolver registered [ 2.496141] ThumbEE CPU extension supported. [ 2.500448] Registering SWP/SWPB emulation handler [ 2.520805] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.530600] hctosys: unable to open rtc device (rtc0) [ 2.544757] 2P5V: disabling [ 2.552597] Freeing unused kernel memory: 1044K [ 2.581075] hub 2-1:1.0: USB hub found [ 2.587683] hub 2-1:1.0: 4 ports detected [ 2.598439] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.610103] mmc2: unspecified timeout for CMD6 - use generic [ 2.622701] mmc2: unspecified timeout for CMD6 - use generic [ 2.632652] devpts: called with bogus options [ 2.637136] mmc2: Card stuck in programming state! __mmc_switch [ 2.646219] mmc2: unspecified timeout for CMD6 - use generic [ 2.655796] mmc2: new high speed MMC card at address 0001 [ 2.668771] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.677155] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.690625] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.703880] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.722196] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.731663] mmcblk0: retrying using single block read Starting klogd: [ 2.748672] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.757973] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.817921] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.827213] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.848922] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.858202] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.867334] udevd[92]: starting version 3.2.9 [ 2.872699] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.882100] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.891382] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.897997] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.907137] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.916405] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.925673] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.940991] udevd[92]: specified user 'tss' unknown [ 2.946054] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.955331] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.961912] udevd[92]: specified group 'tss' unknown [ 2.970591] udevd[93]: starting eudev-3.2.9 [ 2.984325] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.993617] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 3.013839] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.023118] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 3.029164] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.076086] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.085575] mmcblk0: retrying using single block read [ 3.146995] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.156283] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.216161] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.225462] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.288289] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.330113] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.370824] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.413602] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.457675] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.497623] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.506931] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.514312] mmcblk0: unable to read partition table [ 3.534417] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.777138] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.787120] mmcblk0: retrying using single block read [ 3.813886] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.833830] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.866891] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.903834] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.939912] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.976292] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.012839] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.048170] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.086471] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.096466] mmcblk0: retrying using single block read [ 4.140673] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.176985] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.212765] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.248807] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.285021] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.321731] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.358566] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.396035] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.405867] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.418335] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.428502] mmcblk0boot1: retrying using single block read [ 4.473069] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.510063] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.543812] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.581732] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.618433] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.655223] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.693105] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.729904] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.740750] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.750911] mmcblk0boot0: retrying using single block read [ 4.791966] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.828907] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.846250] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.856694] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.867130] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.877548] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.887971] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.898363] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.909143] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.919262] mmcblk0boot1: retrying using single block read [ 4.925235] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.935632] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.946033] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.956422] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.966821] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.977163] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.986025] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.996420] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.006830] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.016790] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.026400] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.036544] mmcblk0boot0: retrying using single block read [ 5.042521] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.052934] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.063358] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.073894] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.084234] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.093084] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.103472] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.113885] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.124275] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.134224] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.373643] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.383608] mmcblk0: retrying using single block read [ 5.389213] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.399493] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.409784] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.420052] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.430365] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.440660] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.450969] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.461264] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.471934] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.481884] mmcblk0: retrying using single block read [ 5.487474] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.497742] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.508027] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.518251] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.527138] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.537439] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.547748] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.558046] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.568360] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.578133] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.592673] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.602824] mmcblk0boot0: retrying using single block read [ 5.608854] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.619275] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.629684] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.640078] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.650487] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.660876] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.671281] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.681671] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.692404] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.702525] mmcblk0boot1: retrying using single block read [ 5.708493] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.718897] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.729238] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.738117] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.748512] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.758918] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.769305] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.779720] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.790064] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.798928] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.809556] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.819679] mmcblk0boot0: retrying using single block read [ 5.825643] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.835985] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.844843] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.855231] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.865637] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.875980] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.884845] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.895238] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.905643] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.915983] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.924832] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.934780] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.944297] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.954432] mmcblk0boot1: retrying using single block read [ 5.960411] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.970833] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.981250] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.991640] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.002049] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.012391] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.021325] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.031729] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.042136] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.052094] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read done Saving random seed: [ 6.083390] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.180050] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1031106/environment . /lava-1031106/environment / # /lava-1031106/bin/lava-test-runner /lava-1031106/0 /lava-1031106/bin/lava-test-runner /lava-1031106/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1031106/0/tests/0_dmesg + cat uuid [ 6.746333] + UUID=1031106_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.793487] [ 6.837278] [ 6.880945] + set +x [ 6.890650] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1031106/environment / # . /lava-1031106/environment/lava-1031106/bin/lava-test-runner /lava-1031106/1 / # /lava-1031106/bin/lava-test-runner /lava-1031106/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1031106/1/tests/1_bootrr + cat uuid [ 7.367945] + UUID=1031106_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1031106/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1031106/1/../bin/lava-test-case [ 7.402611] /lava-1031106/1/../bin/lava-test-case [ 7.442286] /lava-1031106/1/../bin/lava-test-case [ 7.467230] + set +x [ 7.485954] / #