connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1031997/tftp-deploy-xszn6r8r/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031997/tftp-deploy-xszn6r8r/dtb/imx6dl-riotboard.dtb /mnt/tftp/1031997/tftp-deploy-xszn6r8r/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1031997/tftp-deploy-xszn6r8r/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031997/tftp-deploy-xszn6r8r/dtb/imx6dl-riotboard.dtb /mnt/tftp/1031997/tftp-deploy-xszn6r8r/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 7a:f6:30:4f:65:8b eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.148 Loading ARM Linux zImage '/mnt/tftp/1031997/tftp-deploy-xszn6r8r/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1031997/tftp-deploy-xszn6r8r/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a87a73 Loading devicetree from '/mnt/tftp/1031997/tftp-deploy-xszn6r8r/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a88000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-st49 (KernelCI@build-j130707-arm-gcc-10-multi-v7-defconfig-2qc4l) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Tue Mar 5 12:41:44 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c1030540, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s14860 r8192 d22004 u45056 [ 0.000000] pcpu-alloc: s14860 r8192 d22004 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 947056K/1048576K available (8641K kernel code, 985K rwdata, 3828K rodata, 1044K init, 320K bss, 35984K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e3660c (12474 kB) [ 0.000000] .init : 0xc0e37000 - 0xc0f3c000 (1044 kB) [ 0.000000] .data : 0xc0f3c000 - 0xc1032700 ( 986 kB) [ 0.000000] .bss : 0xc1035000 - 0xc10850e0 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002124] Console: colour dummy device 80x30 [ 0.002149] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002162] pid_max: default: 32768 minimum: 301 [ 0.002271] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002283] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002929] CPU: Testing write buffer coherency: ok [ 0.002962] CPU0: Spectre v2: using BPIALL workaround [ 0.003231] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003310] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006357] Brought up 1 CPUs [ 0.006370] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006378] CPU: All CPU(s) started in SVC mode. [ 0.007113] devtmpfs: initialized [ 0.014386] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015114] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015140] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017457] pinctrl core: initialized pinctrl subsystem [ 0.019256] NET: Registered protocol family 16 [ 0.022013] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023579] cpuidle: using governor ladder [ 0.023597] cpuidle: using governor menu [ 0.023828] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.043754] No ATAGs? [ 0.043784] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.043792] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.046538] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.048810] Serial: AMBA PL011 UART driver [ 0.050660] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.062984] mxs-dma 110000.dma-apbh: initialized [ 0.067888] vgaarb: loaded [ 0.068795] SCSI subsystem initialized [ 0.068973] libata version 3.00 loaded. [ 0.069246] usbcore: registered new interface driver usbfs [ 0.069304] usbcore: registered new interface driver hub [ 0.069346] usbcore: registered new device driver usb [ 0.071119] pps_core: LinuxPPS API ver. 1 registered [ 0.071128] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071156] PTP clock support registered [ 0.071390] EDAC MC: Ver: 3.0.0 [ 0.073744] clocksource: Switched to clocksource mxc_timer1 [ 0.083663] NET: Registered protocol family 2 [ 0.083855] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.084840] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.084922] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085056] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085203] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.085436] NET: Registered protocol family 1 [ 0.085815] RPC: Registered named UNIX socket transport module. [ 0.085827] RPC: Registered udp transport module. [ 0.085833] RPC: Registered tcp transport module. [ 0.085840] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.085868] PCI: CLS 0 bytes, default 64 [ 0.086334] Unpacking initramfs... [ 0.989992] Freeing initrd memory: 10784K [ 0.990400] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.002644] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.003517] NFS: Registering the id_resolver key type [ 1.003558] Key type id_resolver registered [ 1.003565] Key type id_legacy registered [ 1.003640] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.005233] bounce: pool size: 64 pages [ 1.005449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.005469] io scheduler noop registered [ 1.005483] io scheduler deadline registered [ 1.005523] io scheduler cfq registered (default) [ 1.026178] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.026197] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.081464] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.083912] SuperH (H)SCI(F) driver initialized [ 1.084522] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.085186] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.788113] console [ttymxc1] enabled [ 1.792303] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.801523] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.810739] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.820360] msm_serial: driver initialized [ 1.825171] STMicroelectronics ASC driver initialized [ 1.832073] [drm] Initialized drm 1.1.0 20060810 [ 1.846422] loop: module loaded [ 1.858010] CAN device driver interface [ 1.864071] 2188000.ethernet supply phy not found, using dummy regulator [ 1.879017] pps pps0: new PPS source ptp0 [ 1.901711] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.908043] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.915041] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.923974] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.931450] usbcore: registered new interface driver pegasus [ 1.937201] usbcore: registered new interface driver asix [ 1.942670] usbcore: registered new interface driver ax88179_178a [ 1.948825] usbcore: registered new interface driver cdc_ether [ 1.954736] usbcore: registered new interface driver smsc75xx [ 1.960561] usbcore: registered new interface driver smsc95xx [ 1.966369] usbcore: registered new interface driver net1080 [ 1.972089] usbcore: registered new interface driver cdc_subset [ 1.978078] usbcore: registered new interface driver zaurus [ 1.983773] usbcore: registered new interface driver cdc_ncm [ 1.991216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.997781] ehci-pci: EHCI PCI platform driver [ 2.002294] ehci-platform: EHCI generic platform driver [ 2.007777] ehci-omap: OMAP-EHCI Host Controller driver [ 2.013184] ehci-orion: EHCI orion driver [ 2.017369] SPEAr-ehci: EHCI SPEAr driver [ 2.021557] ehci-st: EHCI STMicroelectronics driver [ 2.026617] ehci-exynos: EHCI EXYNOS driver [ 2.031009] ehci-atmel: EHCI Atmel driver [ 2.035192] tegra-ehci: Tegra EHCI driver [ 2.039397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.045616] ohci-pci: OHCI PCI platform driver [ 2.050136] ohci-platform: OHCI generic platform driver [ 2.055568] ohci-omap3: OHCI OMAP3 driver [ 2.059754] SPEAr-ohci: OHCI SPEAr driver [ 2.063943] ohci-st: OHCI STMicroelectronics driver [ 2.068999] ohci-atmel: OHCI Atmel driver [ 2.073560] usbcore: registered new interface driver usb-storage [ 2.084827] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.089929] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.094851] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.108756] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.114955] hub 1-0:1.0: USB hub found [ 2.118768] hub 1-0:1.0: 1 port detected [ 2.123321] 2184200.usb supply vbus not found, using dummy regulator [ 2.133201] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.138144] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.153773] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.159976] hub 2-0:1.0: USB hub found [ 2.163813] hub 2-0:1.0: 1 port detected [ 2.168847] mousedev: PS/2 mouse device common for all mice [ 2.178626] i2c /dev entries driver [ 2.191483] sdhci: Secure Digital Host Controller Interface driver [ 2.197692] sdhci: Copyright(c) Pierre Ossman [ 2.203793] Synopsys Designware Multimedia Card Interface Driver [ 2.210991] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.217494] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.226692] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.231861] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.237377] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.278886] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.286685] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.295875] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.301043] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.308452] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.348876] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.356640] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.368186] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.408761] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.418461] ledtrig-cpu: registered to indicate activity on CPUs [ 2.424735] usbcore: registered new interface driver usbhid [ 2.430332] usbhid: USB HID core driver [ 2.438993] NET: Registered protocol family 10 [ 2.443992] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.455113] sit: IPv6 over IPv4 tunneling driver [ 2.460433] NET: Registered protocol family 17 [ 2.464930] can: controller area network core (rev 20120528 abi 9) [ 2.471358] NET: Registered protocol family 29 [ 2.475841] can: raw protocol (rev 20120528) [ 2.480136] can: broadcast manager protocol (rev 20120528 t) [ 2.485829] can: netlink gateway (rev 20130117) max_hops=1 [ 2.491776] Key type dns_resolver registered [ 2.496166] ThumbEE CPU extension supported. [ 2.500472] Registering SWP/SWPB emulation handler [ 2.520837] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.530629] hctosys: unable to open rtc device (rtc0) [ 2.544710] 2P5V: disabling [ 2.552542] Freeing unused kernel memory: 1044K [ 2.581156] hub 2-1:1.0: USB hub found [ 2.587712] hub 2-1:1.0: 4 ports detected [ 2.598542] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.610217] mmc2: unspecified timeout for CMD6 - use generic [ 2.622733] mmc2: unspecified timeout for CMD6 - use generic [ 2.632657] devpts: called with bogus options [ 2.637141] mmc2: Card stuck in programming state! __mmc_switch [ 2.646206] mmc2: unspecified timeout for CMD6 - use generic [ 2.655722] mmc2: new high speed MMC card at address 0001 [ 2.668665] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.677126] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.690693] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.703908] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.722309] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.731773] mmcblk0: retrying using single block read Starting klogd: [ 2.749028] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.758309] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.817649] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.826938] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.848947] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.858227] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.867663] udevd[92]: starting version 3.2.9 [ 2.873037] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.882432] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.891714] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.898269] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.907419] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.916694] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.925963] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.941208] udevd[92]: specified user 'tss' unknown [ 2.946274] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.955552] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.962130] udevd[92]: specified group 'tss' unknown [ 2.970835] udevd[93]: starting eudev-3.2.9 [ 2.984424] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.993716] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 3.013858] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.023138] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 3.029186] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.076275] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.085761] mmcblk0: retrying using single block read [ 3.154574] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.163875] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.220128] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.229423] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.288903] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.331197] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.371432] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.414694] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.456259] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.497166] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.506471] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.513893] mmcblk0: unable to read partition table [ 3.534228] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.776622] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.786611] mmcblk0: retrying using single block read [ 3.813911] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.834211] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.867072] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.903810] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.939157] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.975410] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.010602] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.047987] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.084724] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.094716] mmcblk0: retrying using single block read [ 4.141201] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.177586] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.213864] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.250264] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.285397] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.322138] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.358885] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.396168] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.405986] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.418368] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.428531] mmcblk0boot1: retrying using single block read [ 4.471877] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.508848] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.544882] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.582691] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.619615] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.656336] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.693056] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.728847] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.739706] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.749854] mmcblk0boot0: retrying using single block read [ 4.791842] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.828583] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.842922] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.853374] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.863865] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.874262] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.884679] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.895072] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.905824] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.915947] mmcblk0boot1: retrying using single block read [ 4.921914] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.932303] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.942713] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.953099] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.963502] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.973913] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.984256] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.993108] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.003453] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.012373] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.022335] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.031937] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.042084] mmcblk0boot0: retrying using single block read [ 5.048068] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.058483] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.068916] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.079261] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.088125] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.098469] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.107322] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.117664] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.126519] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.136859] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.145712] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.156056] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.164910] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.174857] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.414528] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.424480] mmcblk0: retrying using single block read [ 5.430086] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.440368] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.450658] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.460880] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.469763] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.480062] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.490377] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.500677] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.510992] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.521462] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.531423] mmcblk0: retrying using single block read [ 5.537013] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.547237] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.556096] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.566320] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.575171] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.585395] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.594243] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.604494] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.613341] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.623638] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.633957] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.644285] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.654056] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.666481] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.676633] mmcblk0boot1: retrying using single block read [ 5.684589] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.695026] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.705448] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.715861] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.726267] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.736609] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.745497] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.755892] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.766297] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.776997] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.787126] mmcblk0boot0: retrying using single block read [ 5.793096] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.803442] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.812310] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.822701] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.833112] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.843451] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.852299] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.862640] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.871490] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.881879] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.892293] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.902908] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.913033] mmcblk0boot1: retrying using single block read [ 5.918996] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.929383] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.939787] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.950173] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.960575] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.970963] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.981367] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.991760] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.001706] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 6.011314] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 6.021458] mmcblk0boot0: retrying using single block read [ 6.027438] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.037844] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.048272] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.058664] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.069066] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.079454] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.089856] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.100198] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.109047] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.118996] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.150789] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.247633] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1031997/environment . /lava-1031997/environment / # /lava-1031997/bin/lava-test-runner /lava-1031997/0 /lava-1031997/bin/lava-test-runner /lava-1031997/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1031997/0/tests/0_dmesg + cat uuid [ 6.815328] + UUID=1031997_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.862563] [ 6.906490] [ 6.950360] + set +x [ 6.960039] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1031997/environment / # . /lava-1031997/environment/lava-1031997/bin/lava-test-runner /lava-1031997/1 / # /lava-1031997/bin/lava-test-runner /lava-1031997/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1031997/1/tests/1_bootrr + cat uuid [ 7.438232] + UUID=1031997_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1031997/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1031997/1/../bin/lava-test-case [ 7.472966] /lava-1031997/1/../bin/lava-test-case [ 7.512342] /lava-1031997/1/../bin/lava-test-case [ 7.537168] + set +x [ 7.555882] / #