connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1033899/tftp-deploy-0i9vo1_3/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1033899/tftp-deploy-0i9vo1_3/dtb/imx6dl-riotboard.dtb /mnt/tftp/1033899/tftp-deploy-0i9vo1_3/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1033899/tftp-deploy-0i9vo1_3/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1033899/tftp-deploy-0i9vo1_3/dtb/imx6dl-riotboard.dtb /mnt/tftp/1033899/tftp-deploy-0i9vo1_3/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address fa:d5:1b:e3:6f:05 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.158 Loading ARM Linux zImage '/mnt/tftp/1033899/tftp-deploy-0i9vo1_3/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1033899/tftp-deploy-0i9vo1_3/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1886fff2 Loading devicetree from '/mnt/tftp/1033899/tftp-deploy-0i9vo1_3/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18870000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-st50 (KernelCI@build-j137838-arm-gcc-10-imx-v6-v7-defconfig-sktg2) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Tue Mar 12 21:03:48 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 16 MiB at 0x4ec00000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0b9d680, node_mem_map ef7f8000 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7c3000 s14696 r8192 d22168 u45056 [ 0.000000] pcpu-alloc: s14696 r8192 d22168 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 992964K/1048576K available (8249K kernel code, 443K rwdata, 2728K rodata, 444K init, 8296K bss, 39228K reserved, 16384K cma-reserved, 244664K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0ac0834 (10979 kB) [ 0.000000] .init : 0xc0ac1000 - 0xc0b30000 ( 444 kB) [ 0.000000] .data : 0xc0b30000 - 0xc0b9ee20 ( 444 kB) [ 0.000000] .bss : 0xc0ba1000 - 0xc13bb390 (8297 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000035] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001198] Console: colour dummy device 80x30 [ 0.001225] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001235] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001244] ... MAX_LOCK_DEPTH: 48 [ 0.001252] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001261] ... CLASSHASH_SIZE: 4096 [ 0.001269] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001278] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001287] ... CHAINHASH_SIZE: 32768 [ 0.001296] memory used by lock dependency info: 5167 kB [ 0.001305] per task-struct memory footprint: 1536 bytes [ 0.001340] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001360] pid_max: default: 32768 minimum: 301 [ 0.001690] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001708] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003665] CPU: Testing write buffer coherency: ok [ 0.003727] CPU0: Spectre v2: using BPIALL workaround [ 0.004490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004581] Setting up static identity map for 0x10008280 - 0x100082f0 [ 0.007164] Brought up 1 CPUs [ 0.007183] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.007195] CPU: All CPU(s) started in SVC mode. [ 0.008746] devtmpfs: initialized [ 0.034440] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.035194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035239] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.036461] pinctrl core: initialized pinctrl subsystem [ 0.039562] NET: Registered protocol family 16 [ 0.042902] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.045035] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.092350] No ATAGs? [ 0.092398] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.092411] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.095419] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.125990] mxs-dma 110000.dma-apbh: initialized [ 0.131127] vgaarb: loaded [ 0.132080] SCSI subsystem initialized [ 0.132503] libata version 3.00 loaded. [ 0.133238] usbcore: registered new interface driver usbfs [ 0.133396] usbcore: registered new interface driver hub [ 0.133511] usbcore: registered new device driver usb [ 0.136066] i2c i2c-0: IMX I2C adapter registered [ 0.136095] i2c i2c-0: can't use DMA [ 0.136962] i2c i2c-1: IMX I2C adapter registered [ 0.136987] i2c i2c-1: can't use DMA [ 0.137860] i2c i2c-3: IMX I2C adapter registered [ 0.137886] i2c i2c-3: can't use DMA [ 0.138031] Linux video capture interface: v2.00 [ 0.138270] pps_core: LinuxPPS API ver. 1 registered [ 0.138283] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.138335] PTP clock support registered [ 0.139028] Advanced Linux Sound Architecture Driver Initialized. [ 0.142320] Bluetooth: Core ver 2.21 [ 0.142427] NET: Registered protocol family 31 [ 0.142440] Bluetooth: HCI device and connection manager initialized [ 0.142504] Bluetooth: HCI socket layer initialized [ 0.142532] Bluetooth: L2CAP socket layer initialized [ 0.142659] Bluetooth: SCO socket layer initialized [ 0.144724] clocksource: Switched to clocksource mxc_timer1 [ 0.171991] NET: Registered protocol family 2 [ 0.172279] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.174259] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.174392] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.175757] TCP: Hash tables configured (established 8192 bind 8192) [ 0.176063] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.176258] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.176800] NET: Registered protocol family 1 [ 0.177770] RPC: Registered named UNIX socket transport module. [ 0.177788] RPC: Registered udp transport module. [ 0.177798] RPC: Registered tcp transport module. [ 0.177808] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.177847] PCI: CLS 0 bytes, default 64 [ 0.178649] Trying to unpack rootfs image as initramfs... [ 1.059163] Freeing initrd memory: 8640K [ 1.060296] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.080857] VFS: Disk quotas dquot_6.6.0 [ 1.081318] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.087800] NFS: Registering the id_resolver key type [ 1.088006] Key type id_resolver registered [ 1.088020] Key type id_legacy registered [ 1.088192] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.089984] fuse init (API version 7.23) [ 1.099772] bounce: pool size: 64 pages [ 1.099900] io scheduler noop registered [ 1.099924] io scheduler deadline registered [ 1.100031] io scheduler cfq registered (default) [ 1.100748] imx-weim 21b8000.weim: Driver registered. [ 1.116396] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.116426] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.118867] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 1.119582] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.119599] pfuze100-regulator 0-0008: pfuze100 found. [ 1.140791] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.142727] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.964353] console [ttymxc1] enabled [ 1.969520] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.979663] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.989730] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 2.000631] [drm] Initialized drm 1.1.0 20060810 [ 2.014568] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.021266] [drm] No driver support for vblank timestamp query. [ 2.027781] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.035476] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.043268] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 [ 2.052454] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.060323] imx-drm display-subsystem: No connectors reported connected with modes [ 2.067952] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.089208] Console: switching to colour frame buffer device 128x48 [ 2.100648] imx-drm display-subsystem: fb0: frame buffer device [ 2.106712] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 2.112676] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.145803] brd: module loaded [ 2.166375] loop: module loaded [ 2.175272] CAN device driver interface [ 2.181739] 2188000.ethernet supply phy not found, using dummy regulator [ 2.205736] pps pps0: new PPS source ptp0 [ 2.243841] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.251654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.258334] ehci-pci: EHCI PCI platform driver [ 2.262928] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.268736] usbcore: registered new interface driver usb-storage [ 2.285474] 2184200.usb supply vbus not found, using dummy regulator [ 2.295625] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.300737] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.324766] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.333636] hub 1-0:1.0: USB hub found [ 2.337672] hub 1-0:1.0: 1 port detected [ 2.345492] mousedev: PS/2 mouse device common for all mice [ 2.357372] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0 [ 2.366455] i2c /dev entries driver [ 2.372973] IR NEC protocol handler initialized [ 2.377631] IR RC5(x/sz) protocol handler initialized [ 2.382699] IR RC6 protocol handler initialized [ 2.387270] IR JVC protocol handler initialized [ 2.391816] IR Sony protocol handler initialized [ 2.396467] IR SANYO protocol handler initialized [ 2.401184] IR Sharp protocol handler initialized [ 2.405922] IR MCE Keyboard/mouse protocol handler initialized [ 2.411768] IR XMP protocol handler initialized [ 2.419229] coda 2040000.vpu: unable to alloc iram [ 2.424588] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6dl.bin failed with error -2 [ 2.433629] coda 2040000.vpu: firmware request failed [ 2.444344] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.450599] Bluetooth: HCI UART driver ver 2.3 [ 2.455117] Bluetooth: HCI UART protocol H4 registered [ 2.460263] Bluetooth: HCI UART protocol LL registered [ 2.467047] sdhci: Secure Digital Host Controller Interface driver [ 2.473236] sdhci: Copyright(c) Pierre Ossman [ 2.477853] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.485186] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.494369] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.499576] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.505218] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.555099] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.565724] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.574951] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.580121] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.585398] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 2.592512] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.645086] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.655663] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.665413] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.714835] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.733192] caam 2100000.caam: Entropy delay = 3200 [ 2.798925] caam 2100000.caam: Instantiated RNG4 SH0 [ 2.859683] caam 2100000.caam: Instantiated RNG4 SH1 [ 2.864810] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 2.871264] caam 2100000.caam: job rings = 2, qi = 0 [ 2.906785] hub 1-1:1.0: USB hub found [ 2.911827] hub 1-1:1.0: 4 ports detected [ 2.930681] caam algorithms registered in /proc/crypto [ 2.941272] mmc2: unspecified timeout for CMD6 - use generic [ 2.947584] caam_jr 2101000.jr0: registering rng-caam [ 2.953393] usbcore: registered new interface driver usbhid [ 2.959021] usbhid: USB HID core driver [ 2.966389] mmc2: unspecified timeout for CMD6 - use generic [ 2.974917] mmc2: unspecified timeout for CMD6 - use generic [ 2.984224] mmc2: unspecified timeout for CMD6 - use generic [ 2.990101] mmc2: new DDR MMC card at address 0001 [ 2.995518] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 3.002321] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 3.008016] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 3.014944] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 3.022721] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB [ 3.061147] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.067574] fsl-asoc-card sound: snd_soc_register_card failed (-517) [ 3.076035] fsl-asrc 2034000.asrc: driver registered [ 3.087717] sgtl5000 0-000a: Using internal LDO instead of VDDD [ 3.112581] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 3.127505] NET: Registered protocol family 10 [ 3.134552] sit: IPv6 over IPv4 tunneling driver [ 3.141260] NET: Registered protocol family 17 [ 3.145799] can: controller area network core (rev 20120528 abi 9) [ 3.152501] NET: Registered protocol family 29 [ 3.157009] can: raw protocol (rev 20120528) [ 3.161405] can: broadcast manager protocol (rev 20120528 t) [ 3.167136] can: netlink gateway (rev 20130117) max_hops=1 [ 3.173311] Key type dns_resolver registered [ 3.183099] Registering SWP/SWPB emulation handler [ 3.194353] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.207274] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 3.254258] usb_otg_vbus: disabling [ 3.258726] ALSA device list: [ 3.261704] #0: imx6-riotboard-sgtl5000 [ 3.267593] Freeing unused kernel memory: 444K [ 3.326396] devpts: called with bogus options Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.548538] udevd[173]: starting version 3.2.9 [ 3.554592] random: udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) [ 3.564911] random: udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) [ 3.574007] random: udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) [ 3.593274] udevd[173]: specified user 'tss' unknown [ 3.598561] udevd[173]: specified group 'tss' unknown [ 3.610644] udevd[174]: starting eudev-3.2.9 done Saving random seed: [ 4.971876] random: dd: uninitialized urandom read (512 bytes read, 14 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 5.139542] random: dropbear: uninitialized urandom read (32 bytes read, 14 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1033899/environment . /lava-1033899/environment / # /lava-1033899/bin/lava-test-runner /lava-1033899/0 /lava-1033899/bin/lava-test-runner /lava-1033899/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1033899/0/tests/0_dmesg + cat uuid + UUID=1033899_1.5.2.3.1[ 5.846273] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 5.930846] [ 5.997421] [ 6.062814] + set +x[ 6.073253] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1033899/environment / # . /lava-1033899/environment/lava-1033899/bin/lava-test-runner /lava-1033899/1 / # /lava-1033899/bin/lava-test-runner /lava-1033899/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1033899/1/tests/1_bootrr + cat uuid + UUID=1033899_1.5.2.3.5[ 6.646356] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1033899/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1033899/1/../bin/lava-test-case [ 6.709299] /lava-1033899/1/../bin/lava-test-case [ 6.772286] /lava-1033899/1/../bin/lava-test-case [ 6.809271] + set +x[ 6.836225] / #