Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.3 (4 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 752731/tftp-deploy-l5nnp8uu/kernel/zImage tftp 0x82000000 752731/tftp-deploy-l5nnp8uu/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.3 Filename '752731/tftp-deploy-l5nnp8uu/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 5.1 MiB/s done Bytes transferred = 9810432 (95b200 hex) => tftp 0x83000000 752731/tftp-deploy-l5nnp8uu/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 752731/tftp-deploy-l5nnp8uu/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.3 Filename '752731/tftp-deploy-l5nnp8uu/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 5.1 MiB/s done Bytes transferred = 12206264 (ba40b8 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 752731/tftp-deploy-l5nnp8uu/dtb/am335x-boneblack.dtb tftp 0x88000000 752731/tftp-deploy-l5nnp8uu/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.3 Filename '752731/tftp-deploy-l5nnp8uu/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 4.6 MiB/s done Bytes transferred = 62852 (f584 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/752731/extract-nfsrootfs-t241rh7u,tcp,hard console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/752731/extract-nfsrootfs-t241rh7u,tcp,hard console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2022-10-01 19:24:46 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12206200 Bytes = 11.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 88012583 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.145-cip17-rt7 (KernelCI@build-j247911-arm-gcc-10-multi-v7-defconfig-preempt-rt-npbc9) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Sat Oct 1 19:00:15 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] DMA zone: 1020 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s34912 r8192 d22432 u65536 [ 0.000000] pcpu-alloc: s34912 r8192 d22432 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/752731/extract-nfsrootfs-t241rh7u,tcp,hard console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 414524K/522240K available (14336K kernel code, 2354K rwdata, 5368K rodata, 2048K init, 421K bss, 42180K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. <6>[ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. <6>[ 0.000000] No expedited grace period (rcu_normal_after_boot). <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008335] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019080] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033212] Console: colour dummy device 80x30 <3>[ 0.038086] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045140] This ensures that you still see kernel messages. Please <3>[ 0.051858] update your kernel commandline. <6>[ 0.056469] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096078] pid_max: default: 32768 minimum: 301 <6>[ 0.101287] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109083] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118239] CPU: Testing write buffer coherency: ok <6>[ 0.123647] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129500] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.136058] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.145349] rcu: Hierarchical SRCU implementation. <6>[ 0.155810] EFI services will not be available. <6>[ 0.161092] smp: Bringing up secondary CPUs ... <6>[ 0.166025] smp: Brought up 1 node, 1 CPU <6>[ 0.170457] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.177172] CPU: All CPU(s) started in SVC mode. <6>[ 0.182887] devtmpfs: initialized <6>[ 0.201552] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.210141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.220580] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.231882] pinctrl core: initialized pinctrl subsystem <6>[ 0.240607] DMI not present or invalid. <6>[ 0.245673] NET: Registered protocol family 16 <6>[ 0.254654] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.284011] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.292696] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.293126] cpuidle: using governor menu <6>[ 1.554285] No ATAGs? <6>[ 1.556917] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.574270] Serial: AMBA PL011 UART driver <6>[ 1.622595] iommu: Default domain type: Translated <6>[ 1.628336] vgaarb: loaded <5>[ 1.632925] SCSI subsystem initialized <7>[ 1.637466] libata version 3.00 loaded. <6>[ 1.642399] usbcore: registered new interface driver usbfs <6>[ 1.648375] usbcore: registered new interface driver hub <6>[ 1.654302] usbcore: registered new device driver usb <6>[ 1.662021] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.667403] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.677143] PTP clock support registered <6>[ 1.685992] clocksource: Switched to clocksource dmtimer <6>[ 2.680473] NET: Registered protocol family 2 <6>[ 2.685565] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.694724] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.703795] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.712107] TCP bind hash table entries: 4096 (order: 4, 114688 bytes, linear) <6>[ 2.719992] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.727042] UDP hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 2.734144] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 2.741988] NET: Registered protocol family 1 <6>[ 2.747590] RPC: Registered named UNIX socket transport module. <6>[ 2.753960] RPC: Registered udp transport module. <6>[ 2.759174] RPC: Registered tcp transport module. <6>[ 2.764282] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.771203] PCI: CLS 0 bytes, default 64 <6>[ 2.776289] Trying to unpack rootfs image as initramfs... <6>[ 3.635462] Freeing initrd memory: 11924K <6>[ 3.640952] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.651777] Initialise system trusted keyrings <6>[ 3.657202] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.674013] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.681831] NFS: Registering the id_resolver key type <5>[ 3.687477] Key type id_resolver registered <5>[ 3.692049] Key type id_legacy registered <6>[ 3.696611] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.703777] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.711728] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.717203] Key type asymmetric registered <5>[ 3.721696] Asymmetric key parser 'x509' registered <6>[ 3.727099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.734981] io scheduler mq-deadline registered <6>[ 3.739933] io scheduler kyber registered <3>[ 3.920975] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.929671] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 4.069896] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.122661] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.213739] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.222450] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.300175] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.308870] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.329627] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.338399] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.421793] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.430415] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.484713] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.613032] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.626494] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.636191] printk: console [ttyS0] enabled <6>[ 4.636191] printk: console [ttyS0] enabled <6>[ 4.645228] printk: bootconsole [omap8250] disabled <6>[ 4.645228] printk: bootconsole [omap8250] disabled <6>[ 4.659783] SuperH (H)SCI(F) driver initialized <6>[ 4.667487] msm_serial: driver initialized <6>[ 4.672352] STMicroelectronics ASC driver initialized <6>[ 4.681091] STM32 USART driver initialized <6>[ 4.689148] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.696367] random: crng init done <6>[ 4.727950] brd: module loaded <6>[ 4.743552] loop: module loaded <6>[ 4.773588] CAN device driver interface <6>[ 4.780149] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.788792] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.794052] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.800436] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.806154] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.886118] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.912187] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.922495] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.929286] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.934941] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 <6>[ 4.945154] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.953606] usbcore: registered new interface driver pegasus <6>[ 4.959746] usbcore: registered new interface driver asix <6>[ 4.965488] usbcore: registered new interface driver ax88179_178a <6>[ 4.972023] usbcore: registered new interface driver cdc_ether <6>[ 4.978233] usbcore: registered new interface driver smsc75xx <6>[ 4.984339] usbcore: registered new interface driver smsc95xx <6>[ 4.990446] usbcore: registered new interface driver net1080 <6>[ 4.996490] usbcore: registered new interface driver cdc_subset <6>[ 5.002736] usbcore: registered new interface driver zaurus <6>[ 5.008692] usbcore: registered new interface driver cdc_ncm <6>[ 5.021529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 5.028448] ehci-pci: EHCI PCI platform driver <6>[ 5.033242] ehci-platform: EHCI generic platform driver <6>[ 5.039342] ehci-orion: EHCI orion driver <6>[ 5.044059] SPEAr-ehci: EHCI SPEAr driver <6>[ 5.048773] ehci-st: EHCI STMicroelectronics driver <6>[ 5.054301] ehci-exynos: EHCI Exynos driver <6>[ 5.059177] ehci-atmel: EHCI Atmel driver <6>[ 5.063821] tegra-ehci: Tegra EHCI driver <6>[ 5.068553] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 5.075084] ohci-pci: OHCI PCI platform driver <6>[ 5.079943] ohci-platform: OHCI generic platform driver <6>[ 5.086039] SPEAr-ohci: OHCI SPEAr driver <6>[ 5.090722] ohci-st: OHCI STMicroelectronics driver <6>[ 5.096313] ohci-atmel: OHCI Atmel driver <6>[ 5.102411] usbcore: registered new interface driver usb-storage <6>[ 5.121991] i2c /dev entries driver <5>[ 5.159146] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 5.167768] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.174255] sdhci: Copyright(c) Pierre Ossman <6>[ 5.183856] Synopsys Designware Multimedia Card Interface Driver <6>[ 5.193772] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 5.207533] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.228354] usbcore: registered new interface driver usbhid <6>[ 5.234245] usbhid: USB HID core driver <6>[ 5.266683] NET: Registered protocol family 10 <6>[ 5.276570] Segment Routing with IPv6 <6>[ 5.280627] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.287759] NET: Registered protocol family 17 <6>[ 5.292862] can: controller area network core <6>[ 5.297731] NET: Registered protocol family 29 <6>[ 5.302466] can: raw protocol <6>[ 5.305760] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 5.313973] can: broadcast manager protocol <6>[ 5.318675] can: netlink gateway - max_hops=1 <5>[ 5.325206] Key type dns_resolver registered <6>[ 5.330139] ThumbEE CPU extension supported. <5>[ 5.334799] Registering SWP/SWPB emulation handler <3>[ 5.340609] omap_voltage_late_init: Voltage driver support not added <6>[ 5.350210] printk: console [ttyS0]: printing thread started <5>[ 5.350281] Loading compiled-in X.509 certificates <6>[ 5.389477] OMAP GPIO hardware version 0.1 <6>[ 5.405331] mmc1: new high speed MMC card at address 0001 <6>[ 5.412195] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 5.412577] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 5.412931] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 5.413218] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (235:0) <6>[ 5.415380] mmcblk1: p1 <4>[ 5.419361] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.430501] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.456533] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.457343] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.458104] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.458972] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.469621] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 5.515701] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 5.549379] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.578835] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.608444] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.635533] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.635565] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.635780] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.713635] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.750562] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.827712] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 8.997174] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 9.015250] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 9.036078] Sending DHCP requests ., OK <6>[ 9.076421] IP-Config: Got DHCP answer from 192.168.11.1, my address is 192.168.11.3 <6>[ 9.076474] IP-Config: Complete: <6>[ 9.076484] device=eth0, hwaddr=64:cf:d9:3f:a0:d5, ipaddr=192.168.11.3, mask=255.255.255.0, gw=192.168.11.1 <6>[ 9.076522] host=192.168.11.3, domain=usen.ad.jp, nis-domain=(none) <6>[ 9.076540] bootserver=0.0.0.0, rootserver=192.168.11.5, rootpath= Loading, please wait...<6>[ 9.076562] nameserver0=192.168.11.1 <6>[ 9.101460] Freeing unused kernel memory: 2048K <6>[ 9.107178] Run /init as init process Starting version 247.3-7 <4>[ 12.554770] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 12.555189] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 12.657659] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 12.658021] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 12.882876] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 12.882930] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 12.889803] hub 1-0:1.0: USB hub found <6>[ 12.889879] hub 1-0:1.0: 1 port detected Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. IP-Config: eth0 hardware address 64:cf:d9:3f:a0:d5 mtu 1500 DHCP IP-Config: eth0 guessed broadcast address 192.168.11.255 IP-Config: eth0 complete (dhcp from 192.168.11.1): address: 192.168.11.3 broadcast: 192.168.11.255 netmask: 255.255.255.0 gateway: 192.168.11.1 dns0 : 192.168.11.1 dns1 : 0.0.0.0 domain : usen.ad.jp rootserver: 192.168.11.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 16.851126] systemd[1]: System time before build time, advancing clock. <30>[ 16.960613] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m! <30>[ 16.961505] systemd[1]: Detected architecture arm. <30>[ 17.035076] systemd[1]: Set hostname to . [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0<30>[ 18.920561] systemd[1]: Queued start job for default target Graphical Interface. m.<28>[ 18.922890] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>[ 18.922933] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>[ 18.924437] systemd[1]: Created slice system-getty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[0m. <30>[ 18.977672] systemd[1]: Created slice system-modprobe.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m. <30>[ 19.008237] systemd[1]: Created slice system-serial\x2dgetty.slice. [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. <30>[ 19.037685] systemd[1]: Created slice User and Session Slice. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. <30>[ 19.067462] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. <30>[ 19.097299] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m. <30>[ 19.126921] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <30>[ 19.127496] systemd[1]: Reached target Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mPaths[0m. <30>[ 19.157454] systemd[1]: Reached target Paths. [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. <30>[ 19.186749] systemd[1]: Reached target Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mSlices[0m. <30>[ 19.217500] systemd[1]: Reached target Slices. [[0;32m OK [0m] Reached target [0;1;39mSwap[0m. <30>[ 19.246802] systemd[1]: Reached target Swap. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. <30>[ 19.277702] systemd[1]: Listening on initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/l<30>[ 19.358714] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. og)[0m. <30>[ 19.361734] systemd[1]: Listening on Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. <30>[ 19.408529] systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlin<30>[ 19.440104] systemd[1]: Listening on Network Service Netlink Socket. k Socket[0m. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0<30>[ 19.480551] systemd[1]: Listening on udev Control Socket. m. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. <30>[ 19.518213] systemd[1]: Listening on udev Kernel Socket. <30>[ 19.547920] systemd[1]: Condition check resulted in Huge Pages File System being skipped. <30>[ 19.549061] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. Mounting [0;1;39mKernel Debug File System[0m...<30>[ 19.555517] systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Trace File System[0m...<30>[ 19.631258] systemd[1]: Mounting Kernel Trace File System... Starting [0;1;39mCreate list of st…odes for the curr<30>[ 19.674434] systemd[1]: Starting Create list of static device nodes for the current kernel... ent kernel[0m... Starting [0;1;39mLoad Kernel Module configfs[0m...<30>[ 19.722305] systemd[1]: Starting Load Kernel Module configfs... <30>[ 19.805148] systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module drm[0m... Starting [0;1;39mLoad Kernel Module fuse[0m... <30>[ 19.849260] systemd[1]: Starting Load Kernel Module fuse... <30>[ 19.924503] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Starting [0;1;39mJournal Service[0m... <30>[ 19.949876] systemd[1]: Starting Journal Service... Starting [0;1;39mLoad Kernel Modules[0m... <30>[ 20.009277] systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mRemount Root and Kernel File Systems<30>[ 20.053174] systemd[1]: Starting Remount Root and Kernel File Systems... [0m... Starting [0;1;39mColdplug All udev Devices[0m...<30>[ 20.101982] systemd[1]: Starting Coldplug All udev Devices... [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.<30>[ 20.168834] systemd[1]: Mounted Kernel Debug File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m. <30>[ 20.227927] systemd[1]: Mounted Kernel Trace File System. [[0;32m OK [0m] Finished [0;1;39mCreate list of st… nodes for the current kernel[0m. <30>[ 20.259134] systemd[1]: Finished Create list of static device nodes for the current kernel. <30>[ 20.536971] systemd[1]: modprobe@configfs.service: Succeeded. <30>[ 20.545073] systemd[1]: Finished Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. <30>[ 20.609745] systemd[1]: modprobe@drm.service: Succeeded. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m<30>[ 20.623116] systemd[1]: Finished Load Kernel Module drm. . <30>[ 20.659057] systemd[1]: modprobe@fuse.service: Succeeded. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0<30>[ 20.666592] systemd[1]: Finished Load Kernel Module fuse. m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. <30>[ 20.729180] systemd[1]: Finished Load Kernel Modules. [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.<30>[ 20.749652] systemd[1]: Finished Remount Root and Kernel File Systems. <30>[ 20.769355] systemd[1]: Condition check resulted in FUSE Control File System being skipped. Mounting [0;1;39mKernel Configuration File System[0m... <30>[ 20.806872] systemd[1]: Mounting Kernel Configuration File System... Starting [0;1;39mLoad/Save Random Seed[0m...<30>[ 20.842189] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. <30>[ 20.842875] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. <30>[ 20.862262] systemd[1]: Starting Load/Save Random Seed... <30>[ 20.982582] systemd[1]: Starting Apply Kernel Variables... Starting [0;1;39mApply Kernel Variables[0m... Starting [0;1;39mCreate System Users[0m...<30>[ 21.091170] systemd[1]: Starting Create System Users... <30>[ 21.131272] systemd[1]: Mounted Kernel Configuration File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. <30>[ 21.409513] systemd[1]: Finished Load/Save Random Seed. <30>[ 21.424245] systemd[1]: Condition check resulted in First Boot Complete being skipped. [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. <30>[ 21.469011] systemd[1]: Finished Apply Kernel Variables. [[0;32m OK [0m] Started [0;1;39mJournal Service[0m.<30>[ 21.542054] systemd[1]: Started Journal Service. Starting [0;1;39mFlush Journal to Persistent Storage[0m... <46>[ 21.913740] systemd-journald[157]: Received client request to flush runtime journal. [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. Starting [0;1;39mCreate Static Device Nodes in /dev[0m... [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mCreate Volatile Files and Directories[0m... Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. Starting [0;1;39mNetwork Service[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m. [[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onli…ata Check for All Filesystems[0m. [[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once a week[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mTimers[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. [[0;32m OK [0m] Reached target [0;1;39mSockets[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. Starting [0;1;39mRemove Stale Onli…t4 Metadata Check Snapshots[0m... Starting [0;1;39mUser Login Management[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. Starting [0;1;39mNetwork Name Resolution[0m... [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS0[0m. [[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m. [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. [[0m[0;31m* [0m] (1 of 2) A start job is running for…a Check Snapshots (16s / no limit) M[K[[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running for…a Check Snapshots (16s / no limit) M[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running for…a Check Snapshots (16s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…k Name Resolution (18s / 1min 40s) M[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…k Name Resolution (18s / 1min 40s) M[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running for…k Name Resolution (18s / 1min 40s) M[K[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. [K[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. [[0;32m OK [0m] Listening on [0;1;39mLoad/Save RF …itch Status /dev/rfkill Watch[0m. Starting [0;1;39mPermit User Sessions[0m... [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS0[0m. [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. [[0;32m OK [0m] Finished [0;1;39mRemove Stale Onli…ext4 Metadata Check Snapshots[0m. [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Runlevel Changes[0m. Debian GNU/Linux 11 debiadebian-bullseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 5.10.145-cip17-rt7 #1 SMP PREEMPT_RT Sat Oct 1 19:00:15 UTC 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/752731/extract-nfsrootfs-t241rh7u' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/752731/extract-nfsrootfs-t241rh7u' / # export NFS_SERVER_IP='192.168.11.5' export NFS_SERVER_IP='192.168.11.5' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-752731/environment . /lava-752731/environment / # /lava-752731/bin/lava-test-runner /lava-752731/0 /lava-752731/bin/lava-test-runner /lava-752731/0 + export TESTRUN_ID=0_ltp-ipc + cd /lava-752731/0/tests/0_ltp-ipc + cat uuid + UUID=752731_1.6.2.4.1 + set +x + cd ./automated/linux/ltp/ + ./ltp.sh -T ipc -s true -v -M 3 -R root -b -d /ltp-tmp -g -e -i /opt/ltp -S skipfile-lkft.yaml -p -u -t false + . ../../lib/sh-test-lib ++ LANG=C ++ export LANG ++ export PATH=/lava-752731/0/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin:/usr/sbin:/usr/local/sbin ++ PATH=/lava-752731/0/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin:/usr/sbin:/usr/local/sbin ++ kernel_config= ++ pwd + OUTPUT=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output + RESULT_FILE=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/result.txt ++ readlink -f ./ltp.sh + SCRIPT=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/ltp.sh ++ dirname /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/ltp.sh + SCRIPTPATH=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp + echo 'Script path is: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp' Script path is: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp + TST_CMDFILES= + SKIPFILE= + SKIPFILE_YAML= + BOARD= + BRANCH= + ENVIRONMENT= + LTP_VERSION=20180926 + TEST_PROGRAM=ltp + TEST_GIT_URL= ++ pwd + TEST_DIR=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/ltp + BUILD_FROM_TAR=false + LTP_TMPDIR=/ltp-tmp + LTP_INSTALL_PATH=/opt/ltp + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + TST_CMDFILES=ipc ++ sed 's,\/,_,' ++ echo ipc + LOG_FILE=ipc + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + SKIP_INSTALL=true + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + LTP_VERSION= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export LTP_TIMEOUT_MUL=3 + LTP_TIMEOUT_MUL=3 + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export PASSWD=root + PASSWD=root + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export BOARD= + BOARD= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export LTP_TMPDIR=/ltp-tmp + LTP_TMPDIR=/ltp-tmp + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export BRANCH= + BRANCH= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export ENVIRONMENT= + ENVIRONMENT= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + export LTP_INSTALL_PATH=/opt/ltp + LTP_INSTALL_PATH=/opt/ltp + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + '[' -z skipfile-lkft.yaml ']' + '[' yaml = yaml ']' + SKIPFILE_YAML=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + [[ '' != '' ]] + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + [[ '' != '' ]] + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + case \"$arg\" in + BUILD_FROM_TAR=false + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t: arg + TEST_TARFILE=https://github.com/linux-test-project/ltp/releases/download//ltp-full-.tar.xz + '[' -n /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml ']' + export SKIPFILE_PATH=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile + SKIPFILE_PATH=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile + generate_skipfile + info_msg 'Generating a skipfile based on /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml' + local 'msg=Generating a skipfile based on /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml' + '[' -z 'Generating a skipfile based on /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml' ']' + printf 'INFO: %s\n' 'Generating a skipfile based on /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml' INFO: Generating a skipfile based on /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml + detect_abi ++ uname -m + abi=armv7l + case \"${abi}\" in + abi=armeabi + local SKIPGEN_ARGS= + test -n '' + test -n '' + test -n '' + ../../bin/armeabi/skipgen /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/skipfile-lkft.yaml + test 0 -eq 0 + info_msg 'Using the following generated skipfile contents (until EOF):' + local 'msg=Using the following generated skipfile contents (until EOF):' + '[' -z 'Using the following generated skipfile contents (until EOF):' ']' + printf 'INFO: %s\n' 'Using the following generated skipfile contents (until EOF):' INFO: Using the following generated skipfile contents (until EOF): + cat /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile bind06 cve-2018-18559 dio10 dio12 dio13 dio14 dio15 dio16 dio17 dio18 dio19 dio20 dio21 dio22 dio23 dio24 dio25 dio26 dio27 dio28 dio29 dio30 fanotify07 fanotify08 fanotify09 fork13 ftrace_stress_test.sh futex_wake04 gf01 gf14 gf15 gf18 hackbench01 hackbench02 hugemmap06 inotify07 inotify08 ksm01 memcg_stress msgctl10 msgctl11 msgstress03 msgstress04 mtest06 perf_event_open02 ping01 ping602 pth_str01 pth_str02 pth_str03 sendfile09 sendfile09_64 setsockopt06 time-schedule01 + info_msg EOF + local msg=EOF + '[' -z EOF ']' + printf 'INFO: %s\n' EOF INFO: EOF + '[' '!' -f /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile ']' + SKIPFILE='-S /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile' + check_root ++ id -ru + '[' 0 -eq 0 ']' + return 0 + create_out_dir /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output + '[' -z /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output ']' + local OUTPUT=/lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output + '[' -d /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output ']' + mkdir -p /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output + '[' -d /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output ']' + info_msg 'About to run ltp test...' + local 'msg=About to run ltp test...' + '[' -z 'About to run ltp test...' ']' + printf 'INFO: %s\n' 'About to run ltp test...' INFO: About to run ltp test... + info_msg 'Output directory: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output' + local 'msg=Output directory: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output' + '[' -z 'Output directory: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output' ']' + printf 'INFO: %s\n' 'Output directory: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output' INFO: Output directory: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output + '[' true = true ']' + info_msg 'ltp installation skipped altogether' + local 'msg=ltp installation skipped altogether' + '[' -z 'ltp installation skipped altogether' ']' + printf 'INFO: %s\n' 'ltp installation skipped altogether' INFO: ltp installation skipped altogether + '[' '!' -d /opt/ltp ']' + info_msg 'Running prep_system' + local 'msg=Running prep_system' + '[' -z 'Running prep_system' ']' + printf 'INFO: %s\n' 'Running prep_system' INFO: Running prep_system + prep_system + systemctl is-active systemd-timesyncd inactive + '[' -f /proc/sys/kernel/unprivileged_userns_clone ']' + info_msg 'Kernel has no support of unprivileged_userns_clone' + local 'msg=Kernel has no support of unprivileged_userns_clone' + '[' -z 'Kernel has no support of unprivileged_userns_clone' ']' + printf 'INFO: %s\n' 'Kernel has no support of unprivileged_userns_clone' INFO: Kernel has no support of unprivileged_userns_clone + info_msg 'Running run_ltp' + local 'msg=Running run_ltp' + '[' -z 'Running run_ltp' ']' + printf 'INFO: %s\n' 'Running run_ltp' INFO: Running run_ltp + run_ltp + cd /opt/ltp + mkdir -m 777 -p /ltp-tmp + pipe0_status './runltp -p -q -f ipc -l /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log -C /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.failed -d /ltp-tmp -S /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile' 'tee /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.out' + '[' 2 -ne 2 ']' + local 'cmd1=./runltp -p -q -f ipc -l /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log -C /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.failed -d /ltp-tmp -S /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile' + local 'cmd2=tee /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.out' + exec + local ret_val ++ eval './runltp -p -q -f ipc -l /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log -C /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.failed -d /ltp-tmp -S /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile' +++ ./runltp -p -q -f ipc -l /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log -C /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.failed -d /ltp-tmp -S /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/generated_skipfile ++ eval 'tee /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.out' +++ tee /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.out INFO: creating /opt/ltp/output directory Checking for required user/group ids 'nobody' user id and group found. 'bin' user id and group found. 'daemon' user id and group found. Users group found. Sys group found. Required users/groups exist. no big block device was specified on commandline. Tests which require a big block device are disabled. You can specify it with option -z INFO: Test start time: Sun Mar 20 19:56:01 UTC 2022 COMMAND: /opt/ltp/bin/ltp-pan -q -e -S -a 278 -n 278 -p -f /ltp-tmp/ltp-lYosRDJZfw/alltests -l /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log -C /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.failed -T /opt/ltp/output/LTP_RUN_ON-LTP_ipc.log.tconf LOG File: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log FAILED COMMAND File: /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.failed TCONF COMMAND File: /opt/ltp/output/LTP_RUN_ON-LTP_ipc.log.tconf Running tests....... pipeio_1 1 TPASS : 501 pipe reads complete, read size = 4090, named pipe, blking, pipeio_3 1 TPASS : 501 pipe reads complete, read size = 4090, sys pipe, pipeio_4 1 TPASS : 501 pipe reads complete, read size = 4090, sys pipe, pipeio_5 0 TINFO : adjusting i/o size to 4096, and # of writes to 13 pipeio_5 1 TPASS : 66 pipe reads complete, read size = 4096, named pipe, blking, pipeio_6 0 TINFO : adjusting i/o size to 4096, and # of writes to 13 pipeio_6 1 TPASS : 66 pipe reads complete, read size = 4096, sys pipe, pipeio_8 0 TINFO : adjusting i/o size to 4096, and # of writes to 13 pipeio_8 1 TPASS : 66 pipe reads complete, read size = 4096, sys pipe, PASS: error count is 0 sem02 0 TINFO : Poster, pid = 416, posting sem02 0 TINFO : Poster posted sem02 0 TINFO : Poster exiting sem02 0 TINFO : Waiter, pid = 416 sem02 0 TINFO : Waiter waiting, pid = 416 sem02 0 TINFO : Waiter done waiting sem02 1 TPASS : passed INFO: ltp-pan reported all tests PASS LTP Version: 20220527-222-g48cfd7a99 INFO: Test end time: Sun Mar 20 19:56:21 UTC 2022 ############################################################### Done executing testcases. LTP Version: 20220527-222-g48cfd7a99 ############################################################### ++ echo 0 + ret_val=0 + exec + return 0 + parse_ltp_output /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log + awk '{print $1\" \"$2}' + grep -E 'PASS|FAIL|CONF' /lava-752731/0/tests/0_ltp-ipc/automated/linux/ltp/output/LTP_ipc.log + sed 's/PASS/pass/; s/FAIL/fail/; s/CONF/skip/' + rm -rf /ltp-tmp + ../../utils/send-to-lava.sh ./output/result.txt + set +x / #