connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 16:14:48 CET 2017 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fefb4e0 -> 0x4fdf69bf (size 511 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/823107/tftp-deploy-gm962m52/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823107/tftp-deploy-gm962m52/dtb/imx6dl-riotboard.dtb /mnt/tftp/823107/tftp-deploy-gm962m52/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/823107/tftp-deploy-gm962m52/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823107/tftp-deploy-gm962m52/dtb/imx6dl-riotboard.dtb /mnt/tftp/823107/tftp-deploy-gm962m52/kernel/zImage warning: No MAC address set. Using random address 06:8f:33:59:57:34 eth0: 1000Mbps full duplex link detected T DHCP client bound to address 10.8.254.160 Loading ARM Linux zImage '/mnt/tftp/823107/tftp-deploy-gm962m52/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12ec3000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/823107/tftp-deploy-gm962m52/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f615dc Loading devicetree from '/mnt/tftp/823107/tftp-deploy-gm962m52/dtb/imx6dl-riotboard.dtb' mmc3: Cannot find nodepath /soc/aips-bus@02100000/usdhc@0219c000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc1,115200n8 Starting kernel at 0x12ec3000, initrd at 0x18000000, oftree at 0x18f62000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483795-arm-gcc-10-defconfig-preempt-rt-8kc47) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Wed Nov 9 21:40:45 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 16 pages/cpu s34912 r8192 d22432 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 931840K/1048576K available (14336K kernel code, 2355K rwdata, 5372K rodata, 2048K init, 420K bss, 51200K reserved, 65536K cma-reserved, 195688K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). Starting syslogd: [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. OK [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Starting klogd: [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 OK [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled Running sysctl: [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0 OK [ 0.000000] ccm: ldb_di1_sel already changed from reset value: 0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns Populating /dev using udev: [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000017] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003516] Console: colour dummy device 80x30 [ 0.003567] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003581] pid_max: default: 32768 minimum: 301 [ 0.003761] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003786] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004610] CPU: Testing write buffer coherency: ok [ 0.004652] CPU0: Spectre v2: using BPIALL workaround [ 0.004931] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005944] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.007526] rcu: Hierarchical SRCU implementation. [ 0.011350] EFI services will not be available. [ 0.011568] smp: Bringing up secondary CPUs ... [ 0.011575] smp: Brought up 1 node, 1 CPU [ 0.011584] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.011593] CPU: All CPU(s) started in SVC mode. [ 0.012118] devtmpfs: initialized [ 0.021657] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.021974] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021997] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.024277] pinctrl core: initialized pinctrl subsystem [ 0.026383] DMI not present or invalid. [ 0.027260] NET: Registered protocol family 16 [ 0.031781] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.034440] thermal_sys: Registered thermal governor 'step_wise' [ 0.034729] cpuidle: using governor menu [ 0.034899] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.211941] vdd1p1: supplied by regulator-dummy [ 0.219837] vdd3p0: supplied by regulator-dummy [ 0.227648] vdd2p5: supplied by regulator-dummy [ 0.235538] vddarm: supplied by regulator-dummy [ 0.243633] vddpu: supplied by regulator-dummy [ 0.251270] vddsoc: supplied by regulator-dummy [ 0.557854] No ATAGs? [ 0.557914] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.557925] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.562639] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.569609] Serial: AMBA PL011 UART driver [ 0.612839] iommu: Default domain type: Translated [ 0.613211] vgaarb: loaded [ 0.614268] SCSI subsystem initialized [ 0.614888] usbcore: registered new interface driver usbfs [ 0.614953] usbcore: registered new interface driver hub [ 0.615002] usbcore: registered new device driver usb [ 0.617727] i2c i2c-0: IMX I2C adapter registered [ 0.619248] i2c i2c-1: IMX I2C adapter registered [ 0.620419] i2c i2c-3: IMX I2C adapter registered [ 0.621924] pps_core: LinuxPPS API ver. 1 registered [ 0.621931] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.621954] PTP clock support registered [ 0.626818] clocksource: Switched to clocksource mxc_timer1 [ 1.790041] NET: Registered protocol family 2 [ 1.790459] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.792001] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.792055] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.792161] TCP bind hash table entries: 8192 (order: 5, 229376 bytes, linear) [ 1.792452] TCP: Hash tables configured (established 8192 bind 8192) [ 1.792676] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) [ 1.792744] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) [ 1.793037] NET: Registered protocol family 1 [ 1.793842] RPC: Registered named UNIX socket transport module. [ 1.793852] RPC: Registered udp transport module. [ 1.793857] RPC: Registered tcp transport module. [ 1.793862] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.793873] PCI: CLS 0 bytes, default 64 [ 1.794468] Trying to unpack rootfs image as initramfs... [ 3.281242] Freeing initrd memory: 15752K [ 3.281803] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.283924] Initialise system trusted keyrings [ 3.284270] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 3.293593] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.294755] NFS: Registering the id_resolver key type [ 3.294815] Key type id_resolver registered [ 3.294822] Key type id_legacy registered [ 3.294965] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.294972] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.295017] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.295631] Key type asymmetric registered [ 3.295641] Asymmetric key parser 'x509' registered [ 3.295743] bounce: pool size: 64 pages [ 3.295784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.295792] io scheduler mq-deadline registered [ 3.295799] io scheduler kyber registered [ 3.338505] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.338528] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.340844] mxs-dma 110000.dma-apbh: initialized [ 3.426153] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.431692] SuperH (H)SCI(F) driver initialized [ 3.432944] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 3.434716] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 3.434810] printk: console [ttymxc1] enabled [ 3.436278] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 3.437917] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 3.439391] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 3.441114] msm_serial: driver initialized [ 3.441405] STMicroelectronics ASC driver initialized [ 3.443507] STM32 USART driver initialized [ 3.467277] brd: module loaded [ 3.479909] loop: module loaded [ 3.499170] CAN device driver interface [ 3.500585] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 3.503038] pps pps0: new PPS source ptp0 [ 3.561098] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.563022] e1000e: Intel(R) PRO/1000 Network Driver [ 3.563028] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.563106] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.563112] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.569954] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.570032] usbcore: registered new interface driver pegasus [ 3.570093] usbcore: registered new interface driver asix [ 3.570138] usbcore: registered new interface driver ax88179_178a [ 3.570189] usbcore: registered new interface driver cdc_ether [ 3.570249] usbcore: registered new interface driver smsc75xx [ 3.570310] usbcore: registered new interface driver smsc95xx [ 3.570362] usbcore: registered new interface driver net1080 [ 3.570406] usbcore: registered new interface driver cdc_subset [ 3.570449] usbcore: registered new interface driver zaurus [ 3.570536] usbcore: registered new interface driver cdc_ncm [ 3.574493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.574502] ehci-pci: EHCI PCI platform driver [ 3.574548] ehci-platform: EHCI generic platform driver [ 3.574868] ehci-orion: EHCI orion driver [ 3.575113] SPEAr-ehci: EHCI SPEAr driver [ 3.575324] ehci-st: EHCI STMicroelectronics driver [ 3.575534] ehci-exynos: EHCI Exynos driver [ 3.575741] ehci-atmel: EHCI Atmel driver [ 3.575945] tegra-ehci: Tegra EHCI driver [ 3.576185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.576217] ohci-pci: OHCI PCI platform driver [ 3.576273] ohci-platform: OHCI generic platform driver [ 3.576577] SPEAr-ohci: OHCI SPEAr driver [ 3.576913] ohci-st: OHCI STMicroelectronics driver [ 3.577176] ohci-atmel: OHCI Atmel driver [ 3.578407] usbcore: registered new interface driver usb-storage [ 3.588322] i2c /dev entries driver [ 3.611305] sdhci: Secure Digital Host Controller Interface driver [ 3.611314] sdhci: Copyright(c) Pierre Ossman [ 3.614298] Synopsys Designware Multimedia Card Interface Driver [ 3.616475] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.617906] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 3.617944] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 3.625516] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.625561] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 3.629293] usbcore: registered new interface driver usbhid [ 3.629303] usbhid: USB HID core driver [ 3.638893] NET: Registered protocol family 10 [ 3.640305] Segment Routing with IPv6 [ 3.640395] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.641148] NET: Registered protocol family 17 [ 3.641174] can: controller area network core [ 3.641290] NET: Registered protocol family 29 [ 3.641299] can: raw protocol [ 3.641308] can: broadcast manager protocol [ 3.641324] can: netlink gateway - max_hops=1 [ 3.641909] Key type dns_resolver registered [ 3.644743] ThumbEE CPU extension supported. [ 3.644766] Registering SWP/SWPB emulation handler [ 3.645177] printk: console [ttymxc1]: printing thread started [ 3.645213] Loading compiled-in X.509 certificates [ 3.677187] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.687864] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 3.690779] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.747871] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.747909] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.776880] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.778128] hub 1-0:1.0: USB hub found [ 3.778185] hub 1-0:1.0: 1 port detected [ 3.781343] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.781828] mmc3: new DDR MMC card at address 0001 [ 3.787498] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 3.788013] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 3.788546] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 3.788817] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (235:0) [ 3.801896] Freeing unused kernel memory: 2048K [ 3.817177] Run /init as init process [ 4.066978] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.144571] udevd[116]: starting version 3.2.9 [ 4.145734] random: udevd: uninitialized urandom read (16 bytes read) [ 4.146004] random: udevd: uninitialized urandom read (16 bytes read) [ 4.146110] random: udevd: uninitialized urandom read (16 bytes read) [ 4.154866] udevd[116]: specified user 'tss' unknown [ 4.155002] udevd[116]: specified group 'tss' unknown [ 4.173631] udevd[117]: starting eudev-3.2.9 [ 4.269907] hub 1-1:1.0: USB hub found [ 4.270069] hub 1-1:1.0: 4 ports detected [ 5.712642] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.949780] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.953940] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.954197] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 5.963701] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.964256] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 5.964394] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.027069] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.067024] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.067129] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 6.067346] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 6.067956] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 6.841316] caam 2100000.crypto: Entropy delay = 3200 [ 6.909460] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.962878] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.962903] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 6.962912] caam 2100000.crypto: job rings = 2, qi = 0 [ 7.555832] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 7.556072] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 7.591391] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 7.591597] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 7.592257] sgtl5000 0-000a: Error reading chip id -6 [ 8.770736] caam algorithms registered in /proc/crypto [ 8.797014] caam 2100000.crypto: registering rng-caam done Saving random seed: OK [ 8.874584] random: dd: uninitialized urandom read (32 bytes read) Starting network: OK Starting dropbear sshd: OK [ 8.978954] random: dropbear: uninitialized urandom read (32 bytes read) [ 8.979483] random: crng init done /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823107/environment . /lava-823107/environment / # /lava-823107/bin/lava-test-runner /lava-823107/0 /lava-823107/bin/lava-test-runner /lava-823107/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823107/0/tests/0_dmesg + cat uuid + UUID=823107_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 9.572523] [ 9.622699] [ 9.667892] + set +x [ 9.712983] / # [ 9.714557] #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-823107/environment / # . /lava-823107/environment/lava-823107/bin/lava-test-runner /lava-823107/1 / # /lava-823107/bin/lava-test-runner /lava-823107/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823107/1/tests/1_bootrr + cat uuid + UUID=823107_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/[ 10.213318] helpers:/lava-823107/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823107/1/../bin/lava-test-case [ 11.278298] /lava-823107/1/../bin/lava-test-case /lava-823107/1/../bin/lava-test-c[ 11.320473] ase [ 11.348838] + set +x