[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 4a:25:f8:cd:b3:50 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.101.242 (433 ms) => setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 => tftp 0x2000000 7923057/tftp-deploy-yyb_mebh/kernel/zImage tftp 0x2000000 7923057/tftp-deploy-yyb_mebh/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.101.1; our IP address is 192.168.101.242 Filename '7923057/tftp-deploy-yyb_mebh/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########## 2.2 MiB/s done Bytes transferred = 9679360 (93b200 hex) => tftp 0x4000000 7923057/tftp-deploy-yyb_mebh/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 7923057/tftp-deploy-yyb_mebh/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.101.1; our IP address is 192.168.101.242 Filename '7923057/tftp-deploy-yyb_mebh/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.3 MiB/s done Bytes transferred = 16036086 (f4b0f6 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 7923057/tftp-deploy-yyb_mebh/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 7923057/tftp-deploy-yyb_mebh/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.101.1; our IP address is 192.168.101.242 Filename '7923057/tftp-deploy-yyb_mebh/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 1.6 MiB/s done Bytes transferred = 41636 (a2a4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x93b200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16036022 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2a3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483897-arm-gcc-10-defconfig-t7ggz) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 21:45:55 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] pcpu-alloc: s33612 r8192 d23732 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1974080K/2097152K available (13312K kernel code, 2324K rwdata, 5344K rodata, 2048K init, 417K bss, 57536K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009080] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023102] Console: colour dummy device 80x30 <6>[ 0.028307] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.039975] pid_max: default: 32768 minimum: 301 <6>[ 0.045476] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.053810] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063280] CPU: Testing write buffer coherency: ok <6>[ 0.068960] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.075021] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082391] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.091517] rcu: Hierarchical SRCU implementation. <6>[ 0.101995] EFI services will not be available. <6>[ 0.107555] smp: Bringing up secondary CPUs ... <6>[ 0.114538] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121046] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.128792] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135300] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.142990] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.149498] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.155474] smp: Brought up 1 node, 4 CPUs <6>[ 0.160288] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.167456] CPU: All CPU(s) started in SVC mode. <6>[ 0.173438] devtmpfs: initialized <6>[ 0.186893] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.195840] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.206954] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.216623] pinctrl core: initialized pinctrl subsystem <6>[ 0.224633] DMI not present or invalid. <6>[ 0.229974] NET: Registered protocol family 16 <6>[ 0.237583] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.248060] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.248586] cpuidle: using governor menu <6>[ 0.260626] No ATAGs? <6>[ 0.263538] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.272640] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.282758] Serial: AMBA PL011 UART driver <6>[ 0.387582] iommu: Default domain type: Translated <6>[ 0.394808] vgaarb: loaded <5>[ 0.399059] SCSI subsystem initialized <7>[ 0.403653] libata version 3.00 loaded. <6>[ 0.408423] usbcore: registered new interface driver usbfs <6>[ 0.414776] usbcore: registered new interface driver hub <6>[ 0.420947] usbcore: registered new device driver usb <6>[ 0.428639] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.434389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.444738] PTP clock support registered <6>[ 0.452659] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.831905] NET: Registered protocol family 2 <6>[ 1.837250] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.847084] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.856614] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.865516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.873844] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.881197] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.888812] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.897034] NET: Registered protocol family 1 <6>[ 1.902718] RPC: Registered named UNIX socket transport module. <6>[ 1.909506] RPC: Registered udp transport module. <6>[ 1.914984] RPC: Registered tcp transport module. <6>[ 1.920437] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.927809] PCI: CLS 0 bytes, default 64 <6>[ 1.932821] Trying to unpack rootfs image as initramfs... <6>[ 3.482922] Freeing initrd memory: 15664K <6>[ 3.488375] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 3.499203] Initialise system trusted keyrings <6>[ 3.504628] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 3.518755] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.526252] NFS: Registering the id_resolver key type <5>[ 3.532115] Key type id_resolver registered <5>[ 3.537020] Key type id_legacy registered <6>[ 3.541818] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.549480] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.557939] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.563519] Key type asymmetric registered <5>[ 3.568302] Asymmetric key parser 'x509' registered <6>[ 3.574016] bounce: pool size: 64 pages <6>[ 3.578542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.586966] io scheduler mq-deadline registered <6>[ 3.592222] io scheduler kyber registered <6>[ 3.636609] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.645242] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 3.656484] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.665112] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 3.747090] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.757418] printk: console [ttyS2] disabled <6>[ 3.762462] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 43, base_baud = 1500000) is a 16550A <6>[ 3.772747] printk: console [ttyS2] enabled <6>[ 3.772747] printk: console [ttyS2] enabled <6>[ 3.782715] printk: bootconsole [uart0] disabled <6>[ 3.782715] printk: bootconsole [uart0] disabled <6>[ 3.796420] SuperH (H)SCI(F) driver initialized <6>[ 3.803337] msm_serial: driver initialized <6>[ 3.808464] STMicroelectronics ASC driver initialized <6>[ 3.816346] STM32 USART driver initialized <6>[ 3.841040] brd: module loaded <6>[ 3.853002] loop: module loaded <6>[ 3.872452] CAN device driver interface <6>[ 3.878390] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.886643] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.892476] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.899459] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.905805] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.915943] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.923285] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <3>[ 3.930322] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing <6>[ 3.943961] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.952572] usbcore: registered new interface driver pegasus <6>[ 3.959260] usbcore: registered new interface driver asix <6>[ 3.965639] usbcore: registered new interface driver ax88179_178a <6>[ 3.972798] usbcore: registered new interface driver cdc_ether <6>[ 3.979658] usbcore: registered new interface driver smsc75xx <6>[ 3.986439] usbcore: registered new interface driver smsc95xx <6>[ 3.993230] usbcore: registered new interface driver net1080 <6>[ 3.999893] usbcore: registered new interface driver cdc_subset <6>[ 4.006861] usbcore: registered new interface driver zaurus <6>[ 4.013473] usbcore: registered new interface driver cdc_ncm <4>[ 4.023098] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.031514] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.102976] dwc2 ff540000.usb: DWC OTG Controller <6>[ 4.108554] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.116791] dwc2 ff540000.usb: irq 48, io mem 0xff540000 <6>[ 4.123805] hub 1-0:1.0: USB hub found <6>[ 4.128333] hub 1-0:1.0: 1 port detected <4>[ 4.133845] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.142277] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.292698] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 4.301275] dwc2 ff580000.usb: DWC OTG Controller <6>[ 4.306886] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 4.315109] dwc2 ff580000.usb: irq 49, io mem 0xff580000 <6>[ 4.322097] hub 2-0:1.0: USB hub found <6>[ 4.326653] hub 2-0:1.0: 1 port detected <6>[ 4.332961] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.340556] ehci-pci: EHCI PCI platform driver <6>[ 4.345891] ehci-platform: EHCI generic platform driver <6>[ 4.352362] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 4.359034] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 4.368358] ehci-platform ff500000.usb: irq 47, io mem 0xff500000 <6>[ 4.402655] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 4.410618] hub 3-0:1.0: USB hub found <6>[ 4.415174] hub 3-0:1.0: 1 port detected <6>[ 4.420529] ehci-orion: EHCI orion driver <6>[ 4.425572] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.430539] ehci-st: EHCI STMicroelectronics driver <6>[ 4.436515] ehci-exynos: EHCI Exynos driver <6>[ 4.441672] ehci-atmel: EHCI Atmel driver <6>[ 4.446677] tegra-ehci: Tegra EHCI driver <6>[ 4.451670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.458904] ohci-pci: OHCI PCI platform driver <6>[ 4.464231] ohci-platform: OHCI generic platform driver <6>[ 4.470617] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.475603] ohci-st: OHCI STMicroelectronics driver <6>[ 4.481537] ohci-atmel: OHCI Atmel driver <6>[ 4.487470] usbcore: registered new interface driver usb-storage <6>[ 4.502030] i2c /dev entries driver <6>[ 4.512488] VCC_DDR: supplied by vcc_sys <6>[ 4.519519] VCC_IO: supplied by vcc_sys <6>[ 4.526414] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 4.535634] VDD_LOG: supplied by vcc_sys <6>[ 4.542582] VCC_20: supplied by vcc_sys <6>[ 4.549501] VCCIO_SD: supplied by VCC_IO <6>[ 4.556990] VDD10_LCD: supplied by VCC_IO <6>[ 4.564942] VCCA_CODEC: supplied by VCC_IO <6>[ 4.572959] VCCA_TP: supplied by vcc_sys <6>[ 4.580319] VCCIO_PMU: supplied by vcc_sys <6>[ 4.587508] VDD_10: supplied by VCC_20 <6>[ 4.594792] VCC_18: supplied by VCC_20 <6>[ 4.602083] VCC18_LCD: supplied by VCC_20 <6>[ 4.611189] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.620601] vdd_cpu: supplied by vcc_sys <6>[ 4.627935] vcc_flash: supplied by VCC_IO <6>[ 4.633298] vcc_sd: supplied by VCC_IO <6>[ 4.640122] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.649533] vdd_gpu: supplied by vcc_sys <4>[ 4.672770] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 4.689191] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 4.703610] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.710812] sdhci: Copyright(c) Pierre Ossman <6>[ 4.716795] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.724405] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.732734] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.732751] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.732863] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.740082] usbcore: registered new interface driver usbhid <6>[ 4.747952] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 4.747982] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.756082] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 4.770250] usbhid: USB HID core driver <6>[ 4.770256] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 4.778425] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.786088] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 4.797190] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo <6>[ 4.799047] NET: Registered protocol family 10 <6>[ 4.811370] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo <6>[ 4.822344] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.827795] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 4.845085] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 4.853308] Segment Routing with IPv6 <6>[ 4.868544] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.875681] NET: Registered protocol family 17 <6>[ 4.880931] can: controller area network core <6>[ 4.886118] NET: Registered protocol family 29 <6>[ 4.886147] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 4.891371] can: raw protocol <6>[ 4.898081] mmc_host mmc1: card is non-removable. <6>[ 4.898668] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.901680] can: broadcast manager protocol <6>[ 4.922765] can: netlink gateway - max_hops=1 <5>[ 4.928085] Key type dns_resolver registered <6>[ 4.933193] ThumbEE CPU extension supported. <5>[ 4.938254] Registering SWP/SWPB emulation handler <6>[ 4.944030] printk: console [ttyS2]: printing thread started <5>[ 4.944041] Loading compiled-in X.509 certificates <6>[ 4.951995] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.976161] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 4.976214] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 4.976761] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 4.976766] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 4.976769] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 4.976774] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <3>[ 4.976798] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed <6>[ 4.976801] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 4.981808] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 4.981896] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 4.981902] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 4.981905] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 4.981907] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 4.981910] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 4.981912] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 4.981915] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 4.981942] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 4.981945] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 4.981947] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 4.981957] rk_gmac-dwmac ff290000.ethernet: device MAC address fa:a0:1e:ac:97:18 <6>[ 5.125163] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 5.125179] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 5.131405] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.133030] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.133043] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.133069] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <3>[ 5.133336] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.133348] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.133355] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.134067] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 5.183642] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 5.200197] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.200274] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.200286] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.200311] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.256729] mmc1: new high speed MMC card at address 0001 <6>[ 5.257297] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 5.257570] mmcblk1boot0: mmc1:0001 032GE4 partition 1 4.00 MiB <6>[ 5.257856] mmcblk1boot1: mmc1:0001 032GE4 partition 2 4.00 MiB <6>[ 5.258002] mmcblk1rpmb: mmc1:0001 032GE4 partition 3 4.00 MiB, chardev (235:0) <6>[ 5.310731] mmcblk1: p1 p2 <6>[ 5.314783] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.314836] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.314841] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.314855] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.351422] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 5.362019] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <4>[ 5.362028] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 5.381030] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 5.435928] hub 3-1:1.0: USB hub found <6>[ 5.436339] hub 3-1:1.0: 4 ports detected <6>[ 5.452389] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.452520] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.452550] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.452708] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 9.513976] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx <6>[ 9.532912] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 9.552620] Sending DHCP requests .., OK <6>[ 13.032850] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.136 <6>[ 13.032911] IP-Config: Complete: <6>[ 13.032922] device=eth0, hwaddr=fa:a0:1e:ac:97:18, ipaddr=192.168.101.136, mask=255.255.255.0, gw=192.168.101.1 <6>[ 13.032980] host=192.168.101.136, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 13.033008] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 13.033041] nameserver0=192.168.101.1 <4>[ 13.036018] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 13.044701] Freeing unused kernel memory: 2048K <6>[ 13.124216] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 13.186582] udevd[120]: starting version 3.2.9 <5>[ 13.187014] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.187136] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.187196] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 13.191286] udevd[120]: specified user 'tss' unknown <27>[ 13.191352] udevd[120]: specified group 'tss' unknown <30>[ 13.192266] udevd[121]: starting eudev-3.2.9 <6>[ 13.407122] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 13.407406] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 13.408227] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.409212] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.409219] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.409234] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 13.442525] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.443060] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.443207] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 13.453913] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 13.454104] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.455962] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.463749] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 13.492675] rtc-hym8563 0-0051: registered as rtc0 <6>[ 13.502148] rtc-hym8563 0-0051: setting system clock to 2022-11-09T22:04:17 UTC (1668031457) <6>[ 13.543511] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.543521] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.543537] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 13.544733] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 13.544740] mmc_host mmc2: card is non-removable. <6>[ 13.559799] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 13.589130] panfrost ffa30000.gpu: clock rate = 400000000 <4>[ 13.595439] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) <4>[ 13.596936] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 13.598434] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 13.601581] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) <6>[ 13.618368] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 13.618376] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400 <6>[ 13.618381] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 13.618386] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 13.620844] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 13.622134] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1 <6>[ 13.680347] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 13.682074] mmc2: new high speed SDIO card at address 0001 <5>[ 13.791681] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 13.816846] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 13.816921] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 13.816929] cfg80211: failed to load regulatory.db <6>[ 13.832755] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 13.832859] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-7923057/environment . /lava-7923057/environment / # /lava-7923057/bin/lava-test-runner /lava-7923057/0 /lava-7923057/bin/lava-test-runner /lava-7923057/0 <6>[ 14.472713] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes + export 'TESTRUN_ID=0_dmesg' + cd /lava-7923057/0/tests/0_dmesg + cat uuid + UUID=7923057_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /o<8>[ 14.494637] pt/kernelci/dmesg.sh <8>[ 14.514721] <8>[ 14.536399] + set +x / # <8>[ 14.558121] <8>[ 14.558672] # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-7923057/environment / # <3>[ 14.843041] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 . /lava-7923057/environment/lava-7923057/bin/lava-test-runner /lava-7923057/1 / # /lava-7923057/bin/lava-test-runner /lava-7923057/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-7923057/1/tests/1_bootrr + cat uuid + UUID=7923057_1.5.2.4.5 + set +x + export 'PAT<8>[ 15.057582] H=/opt/bootrr/helpers:/lava-7923057/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-7923057/1/../bin/lava-test-case /lava-7923057/1/../bin/lava-test-case <8>[ 16.103068] <8>[ 16.113059] /lava-7923057/1/../bin/lava-test-case + set +x <8>[ 16.135288] / # <8>[ 16.140148]