connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/823134/tftp-deploy-1xun41y2/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823134/tftp-deploy-1xun41y2/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/823134/tftp-deploy-1xun41y2/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/823134/tftp-deploy-1xun41y2/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823134/tftp-deploy-1xun41y2/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/823134/tftp-deploy-1xun41y2/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 6a:51:7e:f0:78:4b T eth0: DHCP client bound to address 10.8.254.45 Loading ARM Linux zImage '/mnt/tftp/823134/tftp-deploy-1xun41y2/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12ec3000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/823134/tftp-deploy-1xun41y2/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f6139f Loading devicetree from '/mnt/tftp/823134/tftp-deploy-1xun41y2/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12ec3000, initrd at 0x18000000, oftree at 0x18f62000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483928-arm-gcc-10-multi-v7-defconfig-preempt-rt-2scnc) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Wed Nov 9 21:45:48 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34912 r8192 d22432 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971896K/2097152K available (14336K kernel code, 2355K rwdata, 5372K rodata, 2048K init, 420K bss, 59720K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. UUϼ?c�����r�������rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000020] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns Starting syslogd: [ 0.003865] Console: colour dummy device 80x30 [ 0.003917] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) OK [ 0.003933] pid_max: default: 32768 minimum: 301 [ 0.004138] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Starting klogd: [ 0.004162] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) OK [ 0.004999] CPU: Testing write buffer coherency: ok [ 0.005034] CPU0: Spectre v2: using BPIALL workaround [ 0.005345] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Running sysctl: [ 0.006386] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008114] rcu: Hierarchical SRCU implementation. [ 0.012308] EFI services will not be available. [ 0.012756] smp: Bringing up secondary CPUs ... OK [ 0.014057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014072] CPU1: Spectre v2: using BPIALL workaround Populating /dev using udev: [ 0.015470] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.015489] CPU2: Spectre v2: using BPIALL workaround [ 0.016873] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016890] CPU3: Spectre v2: using BPIALL workaround [ 0.017061] smp: Brought up 1 node, 4 CPUs [ 0.017074] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.017083] CPU: All CPU(s) started in SVC mode. [ 0.017838] devtmpfs: initialized [ 0.028371] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.028690] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.028715] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.032100] pinctrl core: initialized pinctrl subsystem [ 0.034270] DMI not present or invalid. [ 0.035157] NET: Registered protocol family 16 [ 0.039849] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.042832] thermal_sys: Registered thermal governor 'step_wise' [ 0.043087] cpuidle: using governor menu [ 0.043304] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.205840] vdd1p1: supplied by regulator-dummy [ 0.213882] vdd3p0: supplied by regulator-dummy [ 0.221931] vdd2p5: supplied by regulator-dummy [ 0.229886] vddarm: supplied by regulator-dummy [ 0.238100] vddpu: supplied by regulator-dummy [ 0.245886] vddsoc: supplied by regulator-dummy [ 0.643871] No ATAGs? [ 0.644021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.644032] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.649113] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.656839] Serial: AMBA PL011 UART driver [ 0.696879] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.696896] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.696908] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.696919] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.696936] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.700861] iommu: Default domain type: Translated [ 0.701231] vgaarb: loaded [ 0.702323] SCSI subsystem initialized [ 0.702939] usbcore: registered new interface driver usbfs [ 0.703006] usbcore: registered new interface driver hub [ 0.703058] usbcore: registered new device driver usb [ 0.704961] i2c i2c-0: IMX I2C adapter registered [ 0.707496] i2c i2c-1: IMX I2C adapter registered [ 0.709351] i2c i2c-2: IMX I2C adapter registered [ 0.710965] pps_core: LinuxPPS API ver. 1 registered [ 0.710973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.710993] PTP clock support registered [ 0.715638] clocksource: Switched to clocksource mxc_timer1 [ 1.877444] NET: Registered protocol family 2 [ 1.877865] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.879306] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.879467] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.879568] TCP bind hash table entries: 8192 (order: 5, 229376 bytes, linear) [ 1.879889] TCP: Hash tables configured (established 8192 bind 8192) [ 1.880122] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) [ 1.880193] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) [ 1.880502] NET: Registered protocol family 1 [ 1.881302] RPC: Registered named UNIX socket transport module. [ 1.881312] RPC: Registered udp transport module. [ 1.881317] RPC: Registered tcp transport module. [ 1.881321] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.881331] PCI: CLS 0 bytes, default 64 [ 1.881947] Trying to unpack rootfs image as initramfs... [ 3.370014] Freeing initrd memory: 15752K [ 3.370421] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.370751] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.373339] Initialise system trusted keyrings [ 3.373655] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 3.383443] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.384603] NFS: Registering the id_resolver key type [ 3.384718] Key type id_resolver registered [ 3.384725] Key type id_legacy registered [ 3.384864] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.384872] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.384917] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.385588] Key type asymmetric registered [ 3.385598] Asymmetric key parser 'x509' registered [ 3.385702] bounce: pool size: 64 pages [ 3.385744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.385754] io scheduler mq-deadline registered [ 3.385760] io scheduler kyber registered [ 3.431407] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.431428] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.433745] mxs-dma 110000.dma-apbh: initialized [ 3.525739] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.531440] SuperH (H)SCI(F) driver initialized [ 3.532768] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 3.532874] printk: console [ttymxc0] enabled [ 3.534571] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 3.536621] msm_serial: driver initialized [ 3.536929] STMicroelectronics ASC driver initialized [ 3.539201] STM32 USART driver initialized [ 3.563757] brd: module loaded [ 3.577891] loop: module loaded [ 3.582764] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 3.582779] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 3.582789] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 3.582799] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 3.582890] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 3.583119] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 3.583214] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 3.586181] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.586212] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.586228] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.588091] scsi host0: ahci-imx [ 3.588591] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 3.604276] CAN device driver interface [ 3.605818] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 3.610104] pps pps0: new PPS source ptp0 [ 3.644422] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.646655] e1000e: Intel(R) PRO/1000 Network Driver [ 3.646664] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.646743] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.646749] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.653810] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.653867] usbcore: registered new interface driver pegasus [ 3.653935] usbcore: registered new interface driver asix [ 3.653981] usbcore: registered new interface driver ax88179_178a [ 3.654023] usbcore: registered new interface driver cdc_ether [ 3.654083] usbcore: registered new interface driver smsc75xx [ 3.654149] usbcore: registered new interface driver smsc95xx [ 3.654190] usbcore: registered new interface driver net1080 [ 3.654239] usbcore: registered new interface driver cdc_subset [ 3.654283] usbcore: registered new interface driver zaurus [ 3.654380] usbcore: registered new interface driver cdc_ncm [ 3.658656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.658663] ehci-pci: EHCI PCI platform driver [ 3.658721] ehci-platform: EHCI generic platform driver [ 3.659061] ehci-orion: EHCI orion driver [ 3.659325] SPEAr-ehci: EHCI SPEAr driver [ 3.659551] ehci-st: EHCI STMicroelectronics driver [ 3.659782] ehci-exynos: EHCI Exynos driver [ 3.660006] ehci-atmel: EHCI Atmel driver [ 3.660228] tegra-ehci: Tegra EHCI driver [ 3.660488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.660515] ohci-pci: OHCI PCI platform driver [ 3.660571] ohci-platform: OHCI generic platform driver [ 3.660883] SPEAr-ohci: OHCI SPEAr driver [ 3.661119] ohci-st: OHCI STMicroelectronics driver [ 3.661356] ohci-atmel: OHCI Atmel driver [ 3.662583] usbcore: registered new interface driver usb-storage [ 3.672664] i2c /dev entries driver [ 3.697124] sdhci: Secure Digital Host Controller Interface driver [ 3.697133] sdhci: Copyright(c) Pierre Ossman [ 3.700303] Synopsys Designware Multimedia Card Interface Driver [ 3.702597] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.703940] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.706341] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.710880] usbcore: registered new interface driver usbhid [ 3.710890] usbhid: USB HID core driver [ 3.718976] NET: Registered protocol family 10 [ 3.720682] Segment Routing with IPv6 [ 3.720770] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.721549] NET: Registered protocol family 17 [ 3.721571] can: controller area network core [ 3.721689] NET: Registered protocol family 29 [ 3.721700] can: raw protocol [ 3.721709] can: broadcast manager protocol [ 3.721724] can: netlink gateway - max_hops=1 [ 3.722255] Key type dns_resolver registered [ 3.726297] ThumbEE CPU extension supported. [ 3.726338] Registering SWP/SWPB emulation handler [ 3.726702] printk: console [ttymxc0]: printing thread started [ 3.726733] Loading compiled-in X.509 certificates [ 3.738551] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.739467] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.740194] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.765251] imx_usb 2184200.usb: No over current polarity defined [ 3.769198] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.769229] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.787663] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.789890] mmc0: new high speed SDHC card at address 1234 [ 3.791440] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.795607] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.796465] hub 1-0:1.0: USB hub found [ 3.796510] hub 1-0:1.0: 1 port detected [ 3.799688] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.858748] mmc2: new DDR MMC card at address 0001 [ 3.859759] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.860308] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.860967] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.861181] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 3.863299] mmcblk2: p1 p2 [ 3.918128] ata1: SATA link down (SStatus 0 SControl 300) [ 3.918184] ahci-imx 2200000.sata: no device found, disabling link. [ 3.918192] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.926145] Freeing unused kernel memory: 2048K [ 3.936008] Run /init as init process [ 4.095836] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.131334] udevd[154]: starting version 3.2.9 [ 4.132430] random: udevd: uninitialized urandom read (16 bytes read) [ 4.132680] random: udevd: uninitialized urandom read (16 bytes read) [ 4.132789] random: udevd: uninitialized urandom read (16 bytes read) [ 4.141261] udevd[154]: specified user 'tss' unknown [ 4.141382] udevd[154]: specified group 'tss' unknown [ 4.144133] udevd[155]: starting eudev-3.2.9 [ 4.337767] hub 1-1:1.0: USB hub found [ 4.338523] hub 1-1:1.0: 4 ports detected [ 5.167473] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.199433] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.343023] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 5.380489] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 5.393847] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 5.393961] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.395046] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.395171] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.395185] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.447269] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.455214] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.466072] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.480155] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 5.482935] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 5.483182] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.493824] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.527964] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.528119] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.877629] caam 2100000.crypto: Entropy delay = 3200 [ 5.938435] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.999195] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.999220] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 5.999230] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.412277] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 6.421266] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 6.424594] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 6.431644] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 6.644599] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.649974] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.000829] caam algorithms registered in /proc/crypto [ 7.002769] caam 2100000.crypto: registering rng-caam [ 7.185259] random: crng init done [ 7.185269] random: 1 urandom warning(s) missed due to ratelimiting done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823134/environment . /lava-823134/environment / # /lava-823134/bin/lava-test-runner /lava-823134/0 /lava-823134/bin/lava-test-runner /lava-823134/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823134/0/tests/0_dmesg + cat uuid + UUID=823134_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.006353] [ 8.054209] [ 8.104074] + set +x [ 8.150574] / # [ 8.152150] #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-823134/environment / # . /lava-823134/environment/lava-823134/bin/lava-test-runner /lava-823134/1 / # /lava-823134/bin/lava-test-runner /lava-823134/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823134/1/tests/1_bootrr + cat uuid + UUID=823134_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-823134/1/[ 8.660210] ../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823134/1/../bin/lava-test-case [ 9.720680] /lava-823134/1/../bin/lava-test-case [ 9.762303] /lava-823134/1/../bin/lava-test-case [ 9.787153] + set +x