connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/823138/tftp-deploy-3l1fsuvb/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823138/tftp-deploy-3l1fsuvb/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/823138/tftp-deploy-3l1fsuvb/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/823138/tftp-deploy-3l1fsuvb/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823138/tftp-deploy-3l1fsuvb/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/823138/tftp-deploy-3l1fsuvb/kernel/zImage warning: No MAC address set. Using random address b2:76:09:f7:2e:ae eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.239 Loading ARM Linux zImage '/mnt/tftp/823138/tftp-deploy-3l1fsuvb/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82ec3000 no initrd load address, defaulting to 0x8391e000 Loaded initrd GZIP compressed '/mnt/tftp/823138/tftp-deploy-3l1fsuvb/ramdisk/ramdisk.cpio.gz' initrd is at 0x8391e000-0x8487f96f Loading devicetree from '/mnt/tftp/823138/tftp-deploy-3l1fsuvb/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 Starting kernel at 0x82ec3000, initrd at 0x8391e000, oftree at 0x84880000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483928-arm-gcc-10-multi-v7-defconfig-preempt-rt-2scnc) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Wed Nov 9 21:45:48 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TechNexion PICO-IMX6UL and HOBBIT baseboard [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34912 r8192 d22432 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 411948K/524288K available (14336K kernel code, 2355K rwdata, 5372K rodata, 2048K init, 420K bss, 46804K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000039] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.007431] Console: colour dummy device 80x30 [ 0.007554] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.007591] pid_max: default: 32768 minimum: 301 [ 0.007977] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.008020] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009987] CPU: Testing write buffer coherency: ok [ 0.010845] CPU0: update cpu_capacity 1024 [ 0.010878] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.013431] Setting up static identity map for 0x80300000 - 0x803000ac [ 0.016100] rcu: Hierarchical SRCU implementation. [ 0.023637] EFI services will not be available. [ 0.024178] smp: Bringing up secondary CPUs ... [ 0.024196] smp: Brought up 1 node, 1 CPU [ 0.024219] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.024240] CPU: All CPU(s) started in SVC mode. [ 0.025566] devtmpfs: initialized [ 0.045477] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.046202] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.046264] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.051090] pinctrl core: initialized pinctrl subsystem [ 0.056099] DMI not present or invalid. [ 0.058440] NET: Registered protocol family 16 [ 0.067975] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.075433] thermal_sys: Registered thermal governor 'step_wise' [ 0.076008] cpuidle: using governor menu [ 0.325551] vdd3p0: supplied by regulator-dummy [ 0.340054] cpu: supplied by regulator-dummy [ 0.355328] vddsoc: supplied by regulator-dummy [ 0.816263] No ATAGs? [ 0.816410] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.816440] hw-breakpoint: maximum watchpoint size is 8 bytes. Starting syslogd: [ 0.829034] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.844167] Serial: AMBA PL011 UART driver [ 0.952203] iommu: Default domain type: Translated [ 0.953089] vgaarb: loaded OK [ 0.955941] SCSI subsystem initialized [ 0.957619] usbcore: registered new interface driver usbfs [ 0.957829] usbcore: registered new interface driver hub [ 0.957992] usbcore: registered new device driver usb Starting klogd: [ 0.963340] i2c i2c-0: IMX I2C adapter registered [ 0.967349] i2c i2c-1: IMX I2C adapter registered [ 0.970196] imx-i2c 21a8000.i2c: can't get pinctrl, bus recovery not supported OK [ 0.972795] i2c i2c-2: IMX I2C adapter registered [ 0.977350] pps_core: LinuxPPS API ver. 1 registered [ 0.977375] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Running sysctl: [ 0.977439] PTP clock support registered [ 0.987831] clocksource: Switched to clocksource mxc_timer1 [ 3.307066] NET: Registered protocol family 2 [ 3.307723] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.310990] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes, linear) OK [ 3.311099] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.311235] TCP bind hash table entries: 4096 (order: 4, 114688 bytes, linear) [ 3.311575] TCP: Hash tables configured (established 4096 bind 4096) [ 3.311863] UDP hash table entries: 256 (order: 2, 16384 bytes, linear) Populating /dev using udev: [ 3.311968] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear) [ 3.312596] NET: Registered protocol family 1 [ 3.314592] RPC: Registered named UNIX socket transport module. [ 3.314622] RPC: Registered udp transport module. [ 3.314636] RPC: Registered tcp transport module. [ 3.314647] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.314672] PCI: CLS 0 bytes, default 64 [ 3.315964] Trying to unpack rootfs image as initramfs... [ 6.746768] Freeing initrd memory: 15752K [ 6.747931] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 6.753043] Initialise system trusted keyrings [ 6.753838] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 6.779682] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.782646] NFS: Registering the id_resolver key type [ 6.783047] Key type id_resolver registered [ 6.783063] Key type id_legacy registered [ 6.783451] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.783472] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.783592] ntfs: driver 2.1.32 [Flags: R/O]. [ 6.785215] Key type asymmetric registered [ 6.785241] Asymmetric key parser 'x509' registered [ 6.785368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 6.785391] io scheduler mq-deadline registered [ 6.785406] io scheduler kyber registered [ 6.856874] pwm-backlight backlight: supply power not found, using dummy regulator [ 6.892887] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 6.892941] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 6.899141] mxs-dma 1804000.dma-apbh: initialized [ 7.114307] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 7.128013] SuperH (H)SCI(F) driver initialized [ 7.131557] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 7.135055] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 70, base_baud = 5000000) is a IMX [ 7.135325] printk: console [ttymxc5] enabled [ 7.139876] msm_serial: driver initialized [ 7.140650] STMicroelectronics ASC driver initialized [ 7.145676] STM32 USART driver initialized [ 7.172548] panel-simple panel: supply power not found, using dummy regulator [ 7.173192] panel-simple panel: Specify missing connector_type [ 7.208334] brd: module loaded [ 7.238762] loop: module loaded [ 7.286761] CAN device driver interface [ 7.290318] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 7.296808] pps pps0: new PPS source ptp0 [ 7.382021] fec 20b4000.ethernet eth0: registered PHC device 0 [ 7.386793] e1000e: Intel(R) PRO/1000 Network Driver [ 7.386815] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 7.387016] igb: Intel(R) Gigabit Ethernet Network Driver [ 7.387029] igb: Copyright (c) 2007-2014 Intel Corporation. [ 7.404441] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 7.404615] usbcore: registered new interface driver pegasus [ 7.404784] usbcore: registered new interface driver asix [ 7.404908] usbcore: registered new interface driver ax88179_178a [ 7.405032] usbcore: registered new interface driver cdc_ether [ 7.405196] usbcore: registered new interface driver smsc75xx [ 7.405401] usbcore: registered new interface driver smsc95xx [ 7.405532] usbcore: registered new interface driver net1080 [ 7.405652] usbcore: registered new interface driver cdc_subset [ 7.405767] usbcore: registered new interface driver zaurus [ 7.406036] usbcore: registered new interface driver cdc_ncm [ 7.416233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.416261] ehci-pci: EHCI PCI platform driver [ 7.416395] ehci-platform: EHCI generic platform driver [ 7.417196] ehci-orion: EHCI orion driver [ 7.418101] SPEAr-ehci: EHCI SPEAr driver [ 7.418742] ehci-st: EHCI STMicroelectronics driver [ 7.419306] ehci-exynos: EHCI Exynos driver [ 7.419846] ehci-atmel: EHCI Atmel driver [ 7.420390] tegra-ehci: Tegra EHCI driver [ 7.421041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.421124] ohci-pci: OHCI PCI platform driver [ 7.421301] ohci-platform: OHCI generic platform driver [ 7.422044] SPEAr-ohci: OHCI SPEAr driver [ 7.422593] ohci-st: OHCI STMicroelectronics driver [ 7.423133] ohci-atmel: OHCI Atmel driver [ 7.426055] usbcore: registered new interface driver usb-storage [ 7.451333] i2c /dev entries driver [ 7.512815] sdhci: Secure Digital Host Controller Interface driver [ 7.512839] sdhci: Copyright(c) Pierre Ossman [ 7.520746] Synopsys Designware Multimedia Card Interface Driver [ 7.526314] sdhci-pltfm: SDHCI platform and OF driver helper [ 7.555010] usbcore: registered new interface driver usbhid [ 7.555038] usbhid: USB HID core driver [ 7.575102] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 7.577992] NET: Registered protocol family 10 [ 7.583653] Segment Routing with IPv6 [ 7.583885] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.588222] NET: Registered protocol family 17 [ 7.588303] can: controller area network core [ 7.588590] NET: Registered protocol family 29 [ 7.588616] can: raw protocol [ 7.588639] can: broadcast manager protocol [ 7.588677] can: netlink gateway - max_hops=1 [ 7.590214] Key type dns_resolver registered [ 7.596823] ThumbEE CPU extension supported. [ 7.596873] Registering SWP/SWPB emulation handler [ 7.597944] printk: console [ttymxc5]: printing thread started [ 7.598035] Loading compiled-in X.509 certificates [ 7.644651] mmc0: new DDR MMC card at address 0001 [ 7.648741] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 7.649387] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 7.650048] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 7.650564] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (235:0) [ 7.659646] mmcblk0: p1 p2 [ 7.759554] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.765575] panel-simple panel: supply power not found, using dummy regulator [ 7.766058] panel-simple panel: Specify missing connector_type [ 7.797852] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 7.831881] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.832002] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.832340] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 7.834410] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.836425] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.840041] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 7.857989] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.861344] hub 1-0:1.0: USB hub found [ 7.861625] hub 1-0:1.0: 1 port detected [ 7.882157] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 7.891648] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.909246] panel-simple panel: supply power not found, using dummy regulator [ 7.911337] panel-simple panel: Specify missing connector_type [ 7.922553] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.940439] panel-simple panel: supply power not found, using dummy regulator [ 7.942194] panel-simple panel: Specify missing connector_type [ 7.977566] Freeing unused kernel memory: 2048K [ 7.982745] mmc1: new high speed SDIO card at address 0001 [ 7.983873] Run /init as init process [ 8.671867] udevd[108]: starting version 3.2.9 [ 8.674691] random: udevd: uninitialized urandom read (16 bytes read) [ 8.675354] random: udevd: uninitialized urandom read (16 bytes read) [ 8.675658] random: udevd: uninitialized urandom read (16 bytes read) [ 8.715502] udevd[108]: specified user 'tss' unknown [ 8.715911] udevd[108]: specified group 'tss' unknown [ 8.731606] udevd[109]: starting eudev-3.2.9 [ 13.600345] pwm-backlight backlight: supply power not found, using dummy regulator [ 13.606469] panel-simple panel: supply power not found, using dummy regulator [ 13.607020] panel-simple panel: Specify missing connector_type [ 13.700951] pwm-backlight backlight: supply power not found, using dummy regulator [ 13.707064] panel-simple panel: supply power not found, using dummy regulator [ 13.707614] panel-simple panel: Specify missing connector_type [ 14.379976] pwm-backlight backlight: supply power not found, using dummy regulator [ 14.386101] panel-simple panel: supply power not found, using dummy regulator [ 14.386693] panel-simple panel: Specify missing connector_type [ 15.366612] caam 2140000.crypto: Entropy delay = 3200 [ 15.428754] caam 2140000.crypto: Instantiated RNG4 SH0 [ 15.498123] caam 2140000.crypto: Instantiated RNG4 SH1 [ 15.498185] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8) [ 15.498208] caam 2140000.crypto: job rings = 3, qi = 0 [ 15.585092] pwm-backlight backlight: supply power not found, using dummy regulator [ 15.641369] panel-simple panel: supply power not found, using dummy regulator [ 15.641966] panel-simple panel: Specify missing connector_type [ 16.403980] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.804811] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 16.822308] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 16.894220] pwm-backlight backlight: supply power not found, using dummy regulator [ 16.924731] panel-simple panel: supply power not found, using dummy regulator [ 16.925303] panel-simple panel: Specify missing connector_type [ 17.727574] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.735606] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 17.735660] cfg80211: failed to load regulatory.db [ 17.845975] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.863587] panel-simple panel: supply power not found, using dummy regulator [ 17.864156] panel-simple panel: Specify missing connector_type [ 17.922188] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 17.952568] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.989066] panel-simple panel: supply power not found, using dummy regulator [ 17.989626] panel-simple panel: Specify missing connector_type [ 17.992087] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 [ 18.998394] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 19.775913] caam algorithms registered in /proc/crypto [ 19.790872] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto [ 19.790918] caam 2140000.crypto: registering rng-caam [ 19.815666] pwm-backlight backlight: supply power not found, using dummy regulator [ 19.835982] panel-simple panel: supply power not found, using dummy regulator [ 19.840145] panel-simple panel: Specify missing connector_type [ 19.884386] pwm-backlight backlight: supply power not found, using dummy regulator [ 19.916149] panel-simple panel: supply power not found, using dummy regulator [ 19.924541] panel-simple panel: Specify missing connector_type done [ 19.973629] random: crng init done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823138/environment . /lava-823138/environment / # /lava-823138/bin/lava-test-runner /lava-823138/0 /lava-823138/bin/lava-test-runner /lava-823138/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823138/0/tests/0_dmesg + cat uuid + UUID=823138_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 20.952160] [ 21.051245] [ 21.141457] + set +x [ 21.231112] [ 21.235138] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-823138/environment / # . /lava-823138/environment/lava-823138/bin/lava-test-runner /lava-823138/1 / # /lava-823138/bin/lava-test-runner /lava-823138/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823138/1/tests/1_bootrr + cat uuid + UUID=823138_1.5.2.3.5 + set +x + export 'PATH=/opt/[ 21.826885] bootrr/helpers:/lava-823138/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823138/1/../bin/lava-test-case [ 22.937502] /lava-823138/1/../bin/lava-test-case [ 23.022511] /lava-823138/1/../bin/lava-test-case [ 23.071146] + set +x [ 23.107629] / #