connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 16:14:48 CET 2017 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fefb4e0 -> 0x4fdf69bf (size 511 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/823150/tftp-deploy-6qci0six/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823150/tftp-deploy-6qci0six/dtb/imx6dl-riotboard.dtb /mnt/tftp/823150/tftp-deploy-6qci0six/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/823150/tftp-deploy-6qci0six/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823150/tftp-deploy-6qci0six/dtb/imx6dl-riotboard.dtb /mnt/tftp/823150/tftp-deploy-6qci0six/kernel/zImage warning: No MAC address set. Using random address 32:c4:7f:c2:b4:8a eth0: 1000Mbps full duplex link detected T DHCP client bound to address 10.8.254.90 Loading ARM Linux zImage '/mnt/tftp/823150/tftp-deploy-6qci0six/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12e28000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/823150/tftp-deploy-6qci0six/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f4ff7e Loading devicetree from '/mnt/tftp/823150/tftp-deploy-6qci0six/dtb/imx6dl-riotboard.dtb' mmc3: Cannot find nodepath /soc/aips-bus@02100000/usdhc@0219c000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc1,115200n8 Starting kernel at 0x12e28000, initrd at 0x18000000, oftree at 0x18f50000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483909-arm-gcc-10-multi-v7-defconfig-xkp49) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 22:00:51 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932972K/1048576K available (13312K kernel code, 2324K rwdata, 5344K rodata, 2048K init, 417K bss, 50068K reserved, 65536K cma-reserved, 195688K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0 [ 0.000000] ccm: ldb_di1_sel already changed from reset value: 0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000018] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003595] Console: colour dummy device 80x30 [ 0.003645] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003658] pid_max: default: 32768 minimum: 301 [ 0.003830] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003853] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004505] CPU: Testing write buffer coherency: ok [ 0.004541] CPU0: Spectre v2: using BPIALL workaround [ 0.004777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005470] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.007018] rcu: Hierarchical SRCU implementation. [ 0.010340] EFI services will not be available. [ 0.010494] smp: Bringing up secondary CPUs ... [ 0.010500] smp: Brought up 1 node, 1 CPU [ 0.010508] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.010516] CPU: All CPU(s) started in SVC mode. [ 0.010953] devtmpfs: initialized [ 0.017283] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.017515] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.017539] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.019851] pinctrl core: initialized pinctrl subsystem [ 0.021582] DMI not present or invalid. [ 0.022368] NET: Registered protocol family 16 [ 0.025242] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027277] thermal_sys: Registered thermal governor 'step_wise' [ 0.027400] cpuidle: using governor menu [ 0.027528] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.186040] vdd1p1: supplied by regulator-dummy [ 0.193177] vdd3p0: supplied by regulator-dummy [ 0.200249] vdd2p5: supplied by regulator-dummy [ 0.207183] vddarm: supplied by regulator-dummy [ 0.214335] vddpu: supplied by regulator-dummy [ 0.221166] vddsoc: supplied by regulator-dummy [ 0.496966] No ATAGs? [ 0.497023] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.497034] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.500709] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.505995] Serial: AMBA PL011 UART driver [ 0.537760] iommu: Default domain type: Translated [ 0.538076] vgaarb: loaded [ 0.538904] SCSI subsystem initialized [ 0.539583] usbcore: registered new interface driver usbfs [ 0.539630] usbcore: registered new interface driver hub [ 0.539672] usbcore: registered new device driver usb [ 0.541665] i2c i2c-0: IMX I2C adapter registered [ 0.542450] i2c i2c-1: IMX I2C adapter registered [ 0.543039] i2c i2c-3: IMX I2C adapter registered [ 0.544260] pps_core: LinuxPPS API ver. 1 registered [ 0.544266] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.544286] PTP clock support registered [ 0.548038] clocksource: Switched to clocksource mxc_timer1 [ 1.684541] NET: Registered protocol family 2 [ 1.684897] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.685975] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.686016] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.686093] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.686226] TCP: Hash tables configured (established 8192 bind 8192) [ 1.686395] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.686440] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.686614] NET: Registered protocol family 1 [ 1.687341] RPC: Registered named UNIX socket transport module. [ 1.687350] RPC: Registered udp transport module. [ 1.687354] RPC: Registered tcp transport module. [ 1.687358] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.687367] PCI: CLS 0 bytes, default 64 [ 1.687818] Trying to unpack rootfs image as initramfs... [ 3.048205] Freeing initrd memory: 15680K [ 3.048881] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.050473] Initialise system trusted keyrings [ 3.050802] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 3.056628] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.057380] NFS: Registering the id_resolver key type [ 3.057450] Key type id_resolver registered [ 3.057455] Key type id_legacy registered [ 3.057546] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.057552] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.057584] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.058131] Key type asymmetric registered [ 3.058141] Asymmetric key parser 'x509' registered [ 3.058195] bounce: pool size: 64 pages [ 3.058236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.058244] io scheduler mq-deadline registered [ 3.058249] io scheduler kyber registered [ 3.093154] mxs-dma 110000.dma-apbh: initialized [ 3.108251] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.108270] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.155760] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.160234] SuperH (H)SCI(F) driver initialized [ 3.161113] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 3.162287] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 3.162327] printk: console [ttymxc1] enabled [ 3.163255] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 3.164196] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 3.165119] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 3.166561] msm_serial: driver initialized [ 3.166802] STMicroelectronics ASC driver initialized [ 3.168693] STM32 USART driver initialized [ 3.187363] brd: module loaded [ 3.195689] loop: module loaded [ 3.210663] CAN device driver interface [ 3.211852] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 3.213878] pps pps0: new PPS source ptp0 [ 3.263570] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.265024] e1000e: Intel(R) PRO/1000 Network Driver [ 3.265030] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.265091] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.265097] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.270825] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.270877] usbcore: registered new interface driver pegasus [ 3.270920] usbcore: registered new interface driver asix [ 3.270954] usbcore: registered new interface driver ax88179_178a [ 3.270988] usbcore: registered new interface driver cdc_ether [ 3.271030] usbcore: registered new interface driver smsc75xx [ 3.271080] usbcore: registered new interface driver smsc95xx [ 3.271112] usbcore: registered new interface driver net1080 [ 3.271145] usbcore: registered new interface driver cdc_subset [ 3.271178] usbcore: registered new interface driver zaurus [ 3.271249] usbcore: registered new interface driver cdc_ncm [ 3.274517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.274524] ehci-pci: EHCI PCI platform driver [ 3.274560] ehci-platform: EHCI generic platform driver [ 3.274824] ehci-orion: EHCI orion driver [ 3.275028] SPEAr-ehci: EHCI SPEAr driver [ 3.275205] ehci-st: EHCI STMicroelectronics driver [ 3.275373] ehci-exynos: EHCI Exynos driver [ 3.275536] ehci-atmel: EHCI Atmel driver [ 3.275697] tegra-ehci: Tegra EHCI driver [ 3.275895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.275921] ohci-pci: OHCI PCI platform driver [ 3.275973] ohci-platform: OHCI generic platform driver [ 3.276212] SPEAr-ohci: OHCI SPEAr driver [ 3.276391] ohci-st: OHCI STMicroelectronics driver [ 3.276555] ohci-atmel: OHCI Atmel driver [ 3.277578] usbcore: registered new interface driver usb-storage [ 3.285408] i2c /dev entries driver [ 3.304382] sdhci: Secure Digital Host Controller Interface driver [ 3.304392] sdhci: Copyright(c) Pierre Ossman [ 3.306872] Synopsys Designware Multimedia Card Interface Driver [ 3.308831] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.314502] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 3.314537] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 3.315915] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.315954] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 3.318912] ledtrig-cpu: registered to indicate activity on CPUs [ 3.320066] usbcore: registered new interface driver usbhid [ 3.320076] usbhid: USB HID core driver [ 3.326484] NET: Registered protocol family 10 [ 3.327544] Segment Routing with IPv6 [ 3.327622] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.328262] NET: Registered protocol family 17 [ 3.328281] can: controller area network core [ 3.328350] NET: Registered protocol family 29 [ 3.328357] can: raw protocol [ 3.328365] can: broadcast manager protocol [ 3.328374] can: netlink gateway - max_hops=1 [ 3.328843] Key type dns_resolver registered [ 3.330574] ThumbEE CPU extension supported. [ 3.330591] Registering SWP/SWPB emulation handler [ 3.330995] printk: console [ttymxc1]: printing thread started [ 3.331022] Loading compiled-in X.509 certificates [ 4.486959] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 4.488721] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 4.489945] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.519625] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.519673] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.548048] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.548831] hub 1-0:1.0: USB hub found [ 4.548879] hub 1-0:1.0: 1 port detected [ 4.551514] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 4.558295] Freeing unused kernel memory: 2048K [ 4.598675] Run /init as init process [ 4.626414] mmc3: new DDR MMC card at address 0001 [ 4.636470] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 4.636996] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 4.637547] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 4.637843] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (235:0) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.784733] udevd[98]: starting version 3.2.9 [ 4.785689] random: udevd: uninitialized urandom read (16 bytes read) [ 4.785909] random: udevd: uninitialized urandom read (16 bytes read) [ 4.786013] random: udevd: uninitialized urandom read (16 bytes read) [ 4.817667] udevd[98]: specified user 'tss' unknown [ 4.817794] udevd[98]: specified group 'tss' unknown [ 4.821367] udevd[99]: starting eudev-3.2.9 [ 4.838137] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 5.059843] hub 1-1:1.0: USB hub found [ 5.060052] hub 1-1:1.0: 4 ports detected [ 5.813621] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.943322] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.943439] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.943613] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 6.019314] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 6.019731] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 6.019803] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.020324] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.081120] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.105518] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.105617] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 6.105846] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 6.106287] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 6.911407] caam 2100000.crypto: Entropy delay = 3200 [ 6.972201] caam 2100000.crypto: Instantiated RNG4 SH0 [ 7.032963] caam 2100000.crypto: Instantiated RNG4 SH1 [ 7.032976] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 7.032984] caam 2100000.crypto: job rings = 2, qi = 0 [ 7.668571] sgtl5000 0-000a: Error reading chip id -6 [ 7.696189] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 7.696374] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 7.696535] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 7.696656] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 8.476120] caam algorithms registered in /proc/crypto [ 8.477395] caam 2100000.crypto: registering rng-caam done Saving random seed: OK [ 8.541653] random: dd: uninitialized urandom read (32 bytes read) Starting network: OK Starting dropbear sshd: OK [ 8.629669] random: dropbear: uninitialized urandom read (32 bytes read) /bin/sh: can't access tty; job control turned off / # [ 8.659804] random: crng init done / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823150/environment . /lava-823150/environment / # /lava-823150/bin/lava-test-runner /lava-823150/0 /lava-823150/bin/lava-test-runner /lava-823150/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823150/0/tests/0_dmesg + cat uuid + UUID=823150_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /[ 9.202330] bin/sh /opt/kernelci/dmesg.sh [ 9.242769] [ 9.281300] + set +x / # # export SHELL=/bin/sh [ 9.319929] [ 9.321121] # / # export SHELL=/bin/sh. /lava-823150/environment / # . /lava-823150/environment/lava-823150/bin/lava-test-runner /lava-823150/1 / # /lava-823150/bin/lava-test-runner /lava-823150/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823150/1/tests/1_bootrr + cat uuid + UUID=823150_1.5.2.3[ 9.807436] .5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-823150/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823150/1/../bin/lava-test-case [ 10.862053] /lava-823150/1/../bin/lava-test-case /lava-823150/1/../bin/lava-test-c[ 10.901997] ase [ 10.926630] + set +x / # [ 10.944343]