connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/823146/tftp-deploy-94okw7pm/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823146/tftp-deploy-94okw7pm/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/823146/tftp-deploy-94okw7pm/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/823146/tftp-deploy-94okw7pm/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823146/tftp-deploy-94okw7pm/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/823146/tftp-deploy-94okw7pm/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 46:00:04:06:a5:82 T eth0: DHCP client bound to address 10.8.254.61 Loading ARM Linux zImage '/mnt/tftp/823146/tftp-deploy-94okw7pm/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12e28000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/823146/tftp-deploy-94okw7pm/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f50b03 Loading devicetree from '/mnt/tftp/823146/tftp-deploy-94okw7pm/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12e28000, initrd at 0x18000000, oftree at 0x18f51000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483909-arm-gcc-10-multi-v7-defconfig-xkp49) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 22:00:51 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges U�}�EUUU��m�r�������Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1973024K/2097152K available (13312K kernel code, 2324K rwdata, 5344K rodata, 2048K init, 417K bss, 58592K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003970] Console: colour dummy device 80x30 [ 0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004035] pid_max: default: 32768 minimum: 301 [ 0.004217] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004238] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004894] CPU: Testing write buffer coherency: ok [ 0.004922] CPU0: Spectre v2: using BPIALL workaround [ 0.005184] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005910] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.007590] rcu: Hierarchical SRCU implementation. [ 0.011251] EFI services will not be available. [ 0.011558] smp: Bringing up secondary CPUs ... [ 0.012385] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012399] CPU1: Spectre v2: using BPIALL workaround [ 0.013337] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.013351] CPU2: Spectre v2: using BPIALL workaround [ 0.014262] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.014277] CPU3: Spectre v2: using BPIALL workaround [ 0.014394] smp: Brought up 1 node, 4 CPUs [ 0.014404] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.014413] CPU: All CPU(s) started in SVC mode. [ 0.015021] devtmpfs: initialized [ 0.022103] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.022332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022357] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.025592] pinctrl core: initialized pinctrl subsystem [ 0.027395] DMI not present or invalid. [ 0.028204] NET: Registered protocol family 16 [ 0.031336] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033685] thermal_sys: Registered thermal governor 'step_wise' [ 0.033864] cpuidle: using governor menu [ 0.033993] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.179169] vdd1p1: supplied by regulator-dummy [ 0.186291] vdd3p0: supplied by regulator-dummy [ 0.193408] vdd2p5: supplied by regulator-dummy [ 0.200519] vddarm: supplied by regulator-dummy [ 0.207765] vddpu: supplied by regulator-dummy [ 0.214752] vddsoc: supplied by regulator-dummy [ 0.573607] No ATAGs? [ 0.573750] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.573761] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.577871] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.583859] Serial: AMBA PL011 UART driver [ 0.613982] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.614001] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.614012] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.614024] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.614042] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.617317] iommu: Default domain type: Translated [ 0.617609] vgaarb: loaded [ 0.618453] SCSI subsystem initialized [ 0.618939] usbcore: registered new interface driver usbfs [ 0.618985] usbcore: registered new interface driver hub [ 0.619038] usbcore: registered new device driver usb [ 0.620302] i2c i2c-0: IMX I2C adapter registered [ 0.621965] i2c i2c-1: IMX I2C adapter registered [ 0.623229] i2c i2c-2: IMX I2C adapter registered [ 0.624565] pps_core: LinuxPPS API ver. 1 registered [ 0.624572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.624591] PTP clock support registered [ 0.628385] clocksource: Switched to clocksource mxc_timer1 [ 1.764024] NET: Registered protocol family 2 [ 1.764392] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.765545] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.765588] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.765670] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.765813] TCP: Hash tables configured (established 8192 bind 8192) [ 1.765986] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.766029] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.766202] NET: Registered protocol family 1 [ 1.766800] RPC: Registered named UNIX socket transport module. [ 1.766809] RPC: Registered udp transport module. [ 1.766813] RPC: Registered tcp transport module. [ 1.766817] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.766828] PCI: CLS 0 bytes, default 64 [ 1.767334] Trying to unpack rootfs image as initramfs... [ 3.132395] Freeing initrd memory: 15684K [ 3.132820] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.133266] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.135169] Initialise system trusted keyrings [ 3.135549] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 3.141464] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.142257] NFS: Registering the id_resolver key type [ 3.142301] Key type id_resolver registered [ 3.142307] Key type id_legacy registered [ 3.142406] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.142413] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.142446] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.142892] Key type asymmetric registered [ 3.142899] Asymmetric key parser 'x509' registered [ 3.142946] bounce: pool size: 64 pages [ 3.142988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.142996] io scheduler mq-deadline registered [ 3.143003] io scheduler kyber registered [ 3.180544] mxs-dma 110000.dma-apbh: initialized [ 3.185390] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.185407] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.248517] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.253025] SuperH (H)SCI(F) driver initialized [ 3.253965] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 3.254021] printk: console [ttymxc0] enabled [ 3.255111] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 3.256575] msm_serial: driver initialized [ 3.256827] STMicroelectronics ASC driver initialized [ 3.258842] STM32 USART driver initialized [ 3.278088] brd: module loaded [ 3.287789] loop: module loaded [ 3.291747] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 3.291761] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 3.291771] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 3.291780] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 3.291856] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 3.292025] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 3.292103] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 3.294925] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.294954] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.294971] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.296406] scsi host0: ahci-imx [ 3.296773] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 3.309139] CAN device driver interface [ 3.310423] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 3.314056] pps pps0: new PPS source ptp0 [ 3.345522] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.347114] e1000e: Intel(R) PRO/1000 Network Driver [ 3.347122] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.347183] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.347188] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.353251] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.353299] usbcore: registered new interface driver pegasus [ 3.353342] usbcore: registered new interface driver asix [ 3.353375] usbcore: registered new interface driver ax88179_178a [ 3.353416] usbcore: registered new interface driver cdc_ether [ 3.353461] usbcore: registered new interface driver smsc75xx [ 3.353506] usbcore: registered new interface driver smsc95xx [ 3.353537] usbcore: registered new interface driver net1080 [ 3.353569] usbcore: registered new interface driver cdc_subset [ 3.353599] usbcore: registered new interface driver zaurus [ 3.353678] usbcore: registered new interface driver cdc_ncm [ 3.357161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.357168] ehci-pci: EHCI PCI platform driver [ 3.357203] ehci-platform: EHCI generic platform driver [ 3.357491] ehci-orion: EHCI orion driver [ 3.357707] SPEAr-ehci: EHCI SPEAr driver [ 3.357896] ehci-st: EHCI STMicroelectronics driver [ 3.358079] ehci-exynos: EHCI Exynos driver [ 3.358300] ehci-atmel: EHCI Atmel driver [ 3.358493] tegra-ehci: Tegra EHCI driver [ 3.358705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.358726] ohci-pci: OHCI PCI platform driver [ 3.358770] ohci-platform: OHCI generic platform driver [ 3.359032] SPEAr-ohci: OHCI SPEAr driver [ 3.359218] ohci-st: OHCI STMicroelectronics driver [ 3.359397] ohci-atmel: OHCI Atmel driver [ 3.360435] usbcore: registered new interface driver usb-storage [ 3.368492] i2c /dev entries driver [ 3.387631] sdhci: Secure Digital Host Controller Interface driver [ 3.387638] sdhci: Copyright(c) Pierre Ossman [ 3.390304] Synopsys Designware Multimedia Card Interface Driver [ 3.392210] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.397398] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.397856] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.398106] ledtrig-cpu: registered to indicate activity on CPUs [ 3.399516] usbcore: registered new interface driver usbhid [ 3.399525] usbhid: USB HID core driver [ 3.406071] NET: Registered protocol family 10 [ 3.407180] Segment Routing with IPv6 [ 3.407270] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.407850] NET: Registered protocol family 17 [ 3.407866] can: controller area network core [ 3.407935] NET: Registered protocol family 29 [ 3.407943] can: raw protocol [ 3.407950] can: broadcast manager protocol [ 3.407958] can: netlink gateway - max_hops=1 [ 3.408461] Key type dns_resolver registered [ 3.410545] ThumbEE CPU extension supported. [ 3.410560] Registering SWP/SWPB emulation handler [ 3.411634] printk: console [ttymxc0]: printing thread started [ 3.411686] Loading compiled-in X.509 certificates [ 3.428406] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.428825] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.435818] imx_usb 2184200.usb: No over current polarity defined [ 3.439360] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.439389] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.443483] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.466085] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.468194] mmc0: new high speed SDHC card at address 1234 [ 3.468942] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.478284] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.478939] hub 1-0:1.0: USB hub found [ 3.478976] hub 1-0:1.0: 1 port detected [ 3.481273] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.550337] mmc2: new DDR MMC card at address 0001 [ 3.551119] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.551558] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.552013] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.552257] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 3.553826] mmcblk2: p1 p2 [ 3.630747] ata1: SATA link down (SStatus 0 SControl 300) [ 3.630797] ahci-imx 2200000.sata: no device found, disabling link. [ 3.630804] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.793227] Freeing unused kernel memory: 2048K [ 4.839324] Run /init as init process [ 4.858776] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.979612] udevd[124]: starting version 3.2.9 [ 4.980461] random: udevd: uninitialized urandom read (16 bytes read) [ 4.980724] random: udevd: uninitialized urandom read (16 bytes read) [ 4.980825] random: udevd: uninitialized urandom read (16 bytes read) [ 4.988012] udevd[124]: specified user 'tss' unknown [ 4.988124] udevd[124]: specified group 'tss' unknown [ 4.993294] udevd[125]: starting eudev-3.2.9 [ 5.081485] hub 1-1:1.0: USB hub found [ 5.082643] hub 1-1:1.0: 4 ports detected [ 5.350526] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.352463] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.465390] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.465538] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.465675] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 5.465779] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 5.466004] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.467389] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.467825] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 5.467906] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.469099] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.510102] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 5.510263] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 5.510408] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 5.510527] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 5.698454] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 5.709130] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 5.738373] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 5.738498] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.738964] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.739045] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.739058] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.739505] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 5.756085] caam 2100000.crypto: Entropy delay = 3200 [ 5.816888] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.877655] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.877687] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 5.877696] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.026723] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.047568] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.256568] caam algorithms registered in /proc/crypto [ 6.257911] caam 2100000.crypto: registering rng-caam done Saving random seed: OK [ 6.340940] random: dd: uninitialized urandom read (32 bytes read) Starting network: OK Starting dropbear sshd: OK [ 6.440351] random: crng init done [ 6.440367] random: 1 urandom warning(s) missed due to ratelimiting /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823146/environment . /lava-823146/environment / # /lava-823146/bin/lava-test-runner /lava-823146/0 /lava-823146/bin/lava-test-runner /lava-823146/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823146/0/tests/0_dmesg + cat uuid + UUID=823146_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.031347] [ 7.071895] [ 7.112314] + set +x # / # [ 7.152762] [ 7.154079] #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-823146/environment / # . /lava-823146/environment/lava-823146/bin/lava-test-runner /lava-823146/1 / # /lava-823146/bin/lava-test-runner /lava-823146/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823146/1/tests/1_bootrr + cat uuid + UUID=823146_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/[ 7.645245] helpers:/lava-823146/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823146/1/../bin/lava-test-case [ 8.697459] /lava-823146/1/../bin/lava-test-case [ 8.732406] /lava-823146/1/../bin/lava-test-case [ 8.758684] + set +x [ 8.776112] / #